Acoustic,volumetric and osmotic properties of binary mixtures containing the ionic liquid 1-butyl-3-methylimidazolium dicyanamide mixed with primary and secondary alcohols

In this paper, densities and speeds of sound for five binary systems {alcohol + 1-butyl-3-methylimidazolium dicyanamide} were measured from T = (293.15 to 323.15) K and atmospheric pressure. From these experimental data, apparent molar volume and apparent molar isentropic compression have been calculated and fitted to a Redlich–Meyer type equation. This fit was also used to calculate the apparent molar volume and apparent molar isentropic compression at infinite dilution for the studied binary mixtures. Moreover, the osmotic and activity coefficients and vapor pressures of these binary mixtures were also determined at T = 323.15 K using the vapor pressure osmometry technique. The experimental osmotic coefficients were correlated using the Extended Pitzer model of Archer. The mean molal activity coefficients and the excess Gibbs free energy for the studied mixtures were calculated from the parameters obtained in the correlation.     

Measurement and modeling of osmotic coefficients of binary mixtures (alcohol + 1,3-dimethylpyridinium methylsulfate) at T = 323.15 K

Measurement of osmotic coefficients of binary mixtures containing several primary and secondary alcohols (1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol) and the pyridinium-based ionic liquid 1,3-dimethylpyridinium methylsulfate were performed at T = 323.15 K using the vapor pressure osmometry technique, and from experimental data, vapor pressure, and activity coefficients were determined. The extended Pitzer model modified by Archer, and the NRTL model modified by Jaretun and Aly (MNRTL) were used to correlate the experimental osmotic coefficients, obtaining standard deviations lower than 0.017 and 0.054, respectively. From the parameters obtained with the extended Pitzer model modified by Archer, the mean molal activity coefficients and the excess Gibbs free energy for the studied binary mixtures were calculated. The effect of the cation is studied comparing the experimental results with those obtained for the ionic liquid 1,3-dimethylimidazolium methylsulfate.     

Vapour pressures,osmotic and activity coefficients for binary mixtures containing (1-ethylpyridinium ethylsulfate + several alcohols) at T = 323.15 K

Osmotic coefficients of binary mixtures containing several primary and secondary alcohols (1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol) and the pyridinium-based ionic liquid 1-ethylpyridinium ethylsulfate were determined at T = 323.15 K using the vapour pressure osmometry technique. From the experimental results, vapour pressure and activity coefficients can be determined. For the correlation of osmotic coefficients, the extended Pitzer model modified by Archer, and the modified NRTL (MNRTL) model were used, obtaining deviations lower than 0.017 and 0.047, respectively. The mean molal activity coefficients and the excess Gibbs free energy for the binary mixtures studied were determined from the parameters obtained with the extended Pitzer model modified by Archer.     

Isothermal (vapour + liquid) equilibrium at several temperatures of (1-chlorobutane + 1-butanol,or 2-methyl-2-propanol)

Vapour pressures of (1-chlorobutane  +  1-butanol, or 2-methyl-2-propanol) at several temperatures between T =  278.15 and T =  323.15 K were measured by a static method. Reduction of the vapour pressures to obtain activity coefficients and excess molar Gibbs energies was carried out by fitting the vapour pressure data to the Redlich–Kister equation according to Barker’s method. For (1-chlorobutane  +  2-methyl-2-propanol) azeotropic mixtures with a minimum boiling temperature were observed over the whole temperature range.     

Osmotic coefficients of binary mixtures of 1-butyl-3-methylimidazolium methylsulfate and 1,3-dimethylimidazolium methylsulfate with alcohols at T = 323.15 K

Measurements of osmotic coefficients of BMimMSO₄ (1-butyl-3-methylimidazolium methylsulfate) and MMimMSO₄ (1,3-dimethylimidazolium methylsulfate) with ethanol, 1-propanol, and 2-propanol at T = 323.15 K are reported in this work. Vapour pressure and activity values for the binary systems studied are obtained from experimental results. The osmotic coefficients are correlated using the extended Pitzer model modified by Archer and the modified NRTL (MNRTL) model. The standard deviations obtained with both models are lower than 0.013 and 0.060, respectively. The parameters obtained with the extended Pitzer model of Archer are used to calculate the mean molal activity coefficients and the excess Gibbs free energy of the binary mixtures.     

Density and surface tension of pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate and its binary mixture with alcohol and water

The density and surface tension of the pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate were measured from T (293.15 to 343.15) K. The coefficient of thermal expansion, molecular volume, standard entropy, lattice energy, surface entropy, surface enthalpy, and enthalpy of vaporization were calculated from the experimental values. Density and surface tension were also determined for binary mixtures of {1-butyl-3-methyl-imidazolium l-lactate + water/alcohol (methanol, ethanol, and 1-butanol)} systems over the whole composition range from T (298.15 to 318.15) K at atmospheric pressure. The partial molar volume, excess partial molar volume and apparent molar volume of the component IL and alcohol/water in the binary mixtures were discussed as well as limiting properties at infinite dilution and the thermal expansion coefficients of the four binary mixtures. The surface properties of the four binary mixtures were also discussed.     

Densities and volumetric properties of (N-(2-hydroxyethyl)morpholine + ethanol, + 1-propanol, + 2-propanol, + 1-butanol,and + 2-butanol) at (293.15, 298.15, 303.15, 313.15, and 323.15) K

Densities of binary mixtures of N-(2-hydroxyethyl)morpholine with ethanol, 1-propanol, 2-propanol, 1-butanol, and 2-butanol were measured over the entire composition range at temperatures from (293.15 to 323.15) K and atmospheric pressure using a vibrating-tube densimeter. The excess molar volumes, V^E were calculated from density data and fitted to the Redlich–Kister polynomial equation. Apparent molar volumes, partial molar volume at infinite dilution and the thermal expansion coefficient of the mixtures were also calculated. The V^E values were found to be negative over the entire composition range and at all temperatures studied and become less negative with increasing carbon chain length of the alkanols.     

Properties of pure 1-methylimidazolium acetate ionic liquid and its binary mixtures with alcohols

Densities and viscosities of the pure ionic liquid 1-methylimidazolium acetate ([Mim]Ac) and its binary mixtures with methanol, ethanol, 1-propanol, and 1-butanol were measured at temperature ranging from T = (293.15 to 313.15) K. The thermal expansion coefficient, molecular volume, standard entropy, and lattice energy of [Mim]Ac were deduced from the experimental density results. A simple linear equation was used to correlate the variation of viscosity of [Mim]Ac with temperature. Excess molar volumes V^E and viscosity deviations Δη for the binary mixtures at above mentioned temperature were calculated and fitted to the Redlich–Kister equation with satisfactory results. Excess molar volumes for {[Mim]Ac + 1-butanol} mixture have an S shape, while those for other mixtures have a negative deviation from ideal behaviour over the entire mole fraction range. Viscosity deviations are all negative deviation for {[Mim]Ac + alcohol} mixtures. The results were interpreted in terms of interactions and structural factors of binary mixtures.     

Determination and modelling of osmotic coefficients and vapour pressures of binary systems 1- and 2-propanol with CnMimNTf2 ionic liquids (n = 2, 3, and 4) at T = 323.15 K

The osmotic and activity coefficients and vapour pressures of binary mixtures containing 1-propanol, or 2-propanol and imidazolium-based ionic liquids with bis(trifluoromethylsulfonyl)imide as anion (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, C₂MimNTf₂, 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide, C₃MimNTf₂, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, C₄MimNTf₂) were determined at T = 323.15 K using the vapour pressure osmometry technique. The experimental osmotic coefficients were correlated using the extended Pitzer model modified by Archer and the MNRTL model, obtaining standard deviations lower than 0.033 and 0.064, respectively. The mean molal activity coefficients and the excess Gibbs free energy for the mixtures studied were calculated from the parameters of the extended Pitzer model modified by Archer. Besides the effect of the alkyl-chain of the cation, the effect of the anion can be assessed comparing the experimental results with those previously obtained for imidazolium ionic liquids with sulphate anions.     

Volumetric properties of ternary (IL + 2-propanol or 1-butanol or 2-butanol + ethyl acetate) systems and binary (IL + 2-propanol or 1-butanol or 2-butanol) and (1-butanol or 2-butanol + ethyl acetate) systems

The experimental densities for the binary or ternary systems were determined at T = (298.15, 303.15, and 313.15) K. The ionic liquid methyl trioctylammonium bis(trifluoromethylsulfonyl)imide ([MOA]⁺[Tf₂N]⁻) was used for three of the five binary systems studied. The binary systems were ([MOA]⁺[Tf₂N]⁻ + 2-propanol or 1-butanol or 2-butanol) and (1-butanol or 2-butanol + ethyl acetate). The ternary systems were {methyl trioctylammonium bis(trifluoromethylsulfonyl)imide + 2-propanol or 1-butanol or 2-butanol + ethyl acetate}. The binary and ternary excess molar volumes for the above systems were calculated from the experimental density values for each temperature. The Redlich–Kister smoothing polynomial was fitted to the binary excess molar volume data. Virial-Based Mixing Rules were used to correlate the binary excess molar volume data. The binary excess molar volume results showed both negative and positive values over the entire composition range for all the temperatures.The ternary excess molar volume data were successfully correlated with the Cibulka equation using the Redlich–Kister binary parameters.     

Physico-chemical and excess properties of the binary mixtures of methylcyclohexane + ethanol, + propan-1-ol, + propan-2-ol, + butan-1-ol, + 2-methyl-1-propanol,or 3-methyl-1-butanol at T = (298.15, 303.15, and 308.15) K

Physico-chemical properties viz., density, viscosity, and refractive index at temperatures = (298.15, 303.15, and 308.15) K and the speed of sound at T = 298.15 K are measured for the binary mixtures of methylcyclohexane with ethanol, propan1-ol, propan-2-ol, butan-1-ol, 2-methyl-1-propanol, and 3-methyl-1-butanol over the entire range of mixture composition. From these data, excess molar volume, deviations in viscosity, molar refraction, speed of sound, and isentropic compressibility have been calculated. These results are fitted to the polynomial equation to derive the coefficients and standard errors. The experimental and calculated quantities are used to study the nature of mixing behaviours between the mixture components.     

Viscosity,density, and speed of sound of methylcyclopentane with primary and secondary alcohols at T = (293.15, 298.15, and 303.15) K

Viscosities, densities, and speed of sound have been measured over the whole composition range for (methylcyclopentane with ethanol, 1-propanol, 1-butanol, 2-propanol, 2-butanol, and 2-pentanol) at T = (293.15, 298.15, and 303.15) K and atmospheric pressure along with the properties of the pure components. Excess molar volumes, isentropic compressibility, deviations in isentropic compressibility, and viscosity deviations for the binary systems at the above-mentioned temperatures were calculated and fitted to Redlich–Kister equation to determine the fitting parameters and the root-mean square deviations. UNIQUAC equation was used to correlate the experimental data. Dynamic viscosities of the binary mixtures have been predicted using UNIFAC-VISCO and ASOG-VISCO methods.     

Is there any sense to investigate volumetric and acoustic properties of more binary mixtures containing Ionic Liquids?

The excess speed of sound, excess molar volume and excess molar isentropic compressibility of 52 binary mixtures containing Ionic Liquids at T = 298.15 K were calculated using selected literature speed of sound and density data. The second components were alcohols: methanol, or ethanol, or 1-propanol, or 2-propanol, or 1-butanol or other solvents: acetone, acetonitrile, tetrahydrofuran, dichloromethane and dimethylsulfoxide. The Balankina’s relative excesses, X_bal, i.e. the ratios between excess and ideal quantities X^E/X^id were also determined to reduce the structural impact of pure components to absolute excesses. Analysis of quantities determined shows some patterns for concentration dependences of large groups of mixtures; thus, the scheme for influence of anion or cation of Ionic Liquids and solvent on Balankina’s relative excesses was proposed. It seems that presented analysis provide the knowledge about absolute and relative excess quantities for other mixtures without doing the experimental work. It is also visible that analysis of excess molar quantities and X_bal parameters can support the interpretation of interactions which occur between Ionic Liquids and solvent.     

Apparent molar volumes and compressibilities of tetrabutyl-ammonium bromide in organic solvents

The densities of tetra-n-butylammonium bromide in 1-propanol, 1-butanol, acetone at (288.15, 293.15, 298.15, 303.15, 308.15, 313.15, and 323.15) K and sound velocities at 298.15 K have been measured. From these data apparent molar volumes V_Φ at (288.15, 293.15, 298.15, 303.15, 308.15, 313.15, and 323.15) K and the apparent molar isenotropic compressibility K_S,Φ, at T = 298.15 K of tetrabutylammonium bromide in nonaqueous solvents have been determined. The apparent molar volumes and the apparent molar isenotropic compressibilities were fitted to the Redlich, Rosenfeld, and Mayer equation as well as to the Pitzer equation yielding infinite dilution data, which were compared to the similar quantities for tetrabutylphosphonium bromide. Moreover, the acoustical parameters such as intermolecular free length (L_f), relative association (R_A), Rao’s molar sound function (R_m), and salvation number (S_n) were calculated using the experimental data of density and sound velocity at T = 298.15 K for ammonium and phosphonium bromides. The obtained data suggest the penetration of the acetone molecule within the intraionic free space of the tetrabutyl-ammonium and phosphonium cations.     

Excess molar volumes and partial molar volumes for (propionitrile + an alkanol) at T = 298.15 K and p = 0.1 MPa

The excess molar volumes and the partial molar volumes for (propionitrile + an alkanol) at T = 298.15 K and at atmospheric pressure are reported. The hydrogen bonding between the OH⋯NC groups are discussed in terms of the chain length of the alkanol. The alkanols studied are (methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, and 1-pentanol).The excess molar volume data was fitted to the Redlich–Kister equation The partial molar volumes were calculated from the Redlich–Kister coefficients.     

Thermodynamic properties of binary mixtures containing hydrofluoroether

Excess molar enthalpy and excess molar volume at T =  298.15 K are reported for binary mixtures of (nonafluorobutylmethylether  +  butylmethylether, or nonane, or heptane, or pentane, or 1-propanol, or 2-propoxyethanol). Excess molar enthalpies of the mixture of (nonafluorobutylmethylether  +  1-pentanol) also are reported at T =  298.15 K. The results of excess molar enthalpy are endothermic and the results of excess molar volume are positive in the whole concentration for all the mixtures. The phase separation is found in the range of 0.15  < x <  0.92 for the 1-pentanol system. The results are explained by means of the destruction of the dipolar interactions and hydrogen bonds in the component liquids, the difference of the dispersion interaction, and the formation of the intermolecular hydrogen bonds between unlike molecules.     

Excess molar enthalpies of the binary systems: (Dibutyl ether + isomers of pentanol) at T = (298.15 and 308.15) K

In this work, we present the experimental measurements of excess molar enthalpies for the binary systems of dibutyl ether with different isomers of pentanol: 1-pentanol, 2-pentanol, 3-pentanol, 3-methyl-2-butanol, 2-methyl-1-butanol, 3-methyl-1-butanol and 2-methyl-2-butanol; all of them at T = (298.15 and 308.15) K and atmospheric pressure. Our goal was to determine the influence of the OH-group position on the different isomers of pentanol in the excess molar enthalpies of the binary systems studied. For this purpose we have analysed their experimental effective-reduced dipole moments. All values of excess molar enthalpies for the mixtures studied are positive whereas the results obtained for the effective-reduced dipole moments of the isomers of pentanol are similar.     

Partial molar volumes of organic solutes in water. XIII. Butanols (aq) at temperatures T = 298 K to 573 K and at pressures up to 30 MPa

Density data for dilute aqueous solutions of 1-butanol, 2-butanol, 2-methyl-1-propanol (iso-butanol), and 2-methyl-2-propanol (tert-butanol) are presented together with partial molar volumes at infinite dilution calculated from the experimental data. The measurements were performed at temperatures from T = 298.15 K up to T = 573.15 K and at pressure close to the saturated vapour pressure of water, at pressures close to p = 20 MPa and p = 30 MPa. The data were obtained using a high-temperature high-pressure flow vibrating-tube densimeter.     

Application of the PFV EoS correlation to excess molar volumes of (1-ethyl-3-methylimidazolium ethylsulfate + alkanols) at different temperatures

The experimental densities for the binary systems of an ionic liquid and an alkanol {1-ethyl-3-methylimidazolium ethylsulfate [EMIM]⁺ [EtSO₄]^? + methanol or 1-propanol or 2-propanol} were determined at T = (298.15, 303.15, and 313.15) K. The excess molar volumes for the above systems were then calculated from the experimental density values for each temperature. The Redlich–Kister smoothing polynomial was used to fit the experimental results and the partial molar volumes were determined from the Redlich–Kister coefficients. For all the systems studied, the excess molar volume results were negative over the entire composition range for all the temperatures. The excess molar volumes were correlated with the pentic four parameter virial (PFV) equation of state (EoS) model.     

Effect of the temperature on the physical properties of pure 1-propyl 3-methylimidazolium bis(trifluoromethylsulfonyl)imide and characterization of its binary mixtures with alcohols

In this paper, physical properties of a high purity sample of the ionic liquid 1-propyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [PMim][NTf₂], and its binary mixtures with methanol, ethanol, 1-propanol, and 2-propanol were measured at atmospheric pressure. The temperature dependence of density, refractive index and speed of sound (293.15 to 343.15) K and dynamic viscosity (298.15 to 343.15) K were studied at atmospheric pressure by conventional techniques for the pure ionic liquid. For its mixtures with alcohols, density, speed of sound, and refractive index were measured at T = 298.15 K over the whole composition range. The thermal expansion coefficient of the [PMim][NTf₂] was calculated from the experimental results using an empirical equation, and values of the excess molar volume, excess refractive index, and excess molar isentropic compressibility for the binary systems at the above mentioned temperature, were calculated and fitted to the Redlich–Kister equation. The heat capacity of the pure ionic liquid at T = 298.15 K was determined using DSC.