The effect of temperature and pressure on acoustic and thermodynamic properties of 1,4-butanediol. The comparison with 1,2-, and 1,3-butanediols

The speeds of sound in 1,4-butanediol have been measured in the temperature range from (298 to 318) K at pressures up to 101 MPa by the pulse-echo-overlap method. The densities have been measured in the temperature range from (293.15 to 353.15) K under atmospheric pressure with a vibrating tube densimeter. Based on the experimental results, the densities, isobaric heat capacities, isobaric coefficients of thermal expansion, isentropic and isothermal compressibilities, as well as the internal pressure as function of temperature and pressure have been calculated. The effects of pressure and temperature are discussed and compared with the previous results for 1,2- and 1,3-butanediols.     

Thermodynamic characterization of the mixture (1-butanol + iso-octane): Densities,viscosities, and isobaric heat capacities at high pressures

The densities at high pressures of 1-butanol and iso-octane were measured in the range (0.1 to 140) MPa at seven different temperatures, from (273.15 to 333.15) K, and their mixtures were measured in the range (0.1 to 50) MPa at four different temperatures, from (273.15 to 333.15) K. The measurements were performed in a high-pressure vibrating tube densimeter. The pressure–volume–temperature behavior of these compounds and their mixtures was evaluated accurately over a wide range of temperatures and pressures. The data were successfully correlated with the empirical Tamman–Tait equation. The experimental data and the correlations were used to study the behavior and the influence of temperature and pressure on the isothermal compressibility and the isobaric thermal expansivity.Also, the isobaric heat capacities were measured over the range (0.1 to 25) MPa at two different temperatures (293.15 and 313.15) K for the pure compounds and their mixtures. The measurements were performed in a high-pressure automated flow calorimeter. The excess molar heat capacities were assessed for the mixture and a positive deviation from the ideality was obtained.     

Excess enthalpy,density, and heat capacity for binary systems of alkylimidazolium-based ionic liquids + water

Experimental measurements of excess molar enthalpy, density, and isobaric molar heat capacity are presented for a set of binary systems ionic liquid + water as a function of temperature at atmospheric pressure. The studied ionic liquids are 1-butyl-3-methylpyridinium tetrafluoroborate, 1-ethyl-3-methylimidazolium ethylsulfate, 1-butyl-3-methylimidazolium methylsulfate, 1-butyl-3-methylimidazolium trifluoromethanesulfonate, and 1-ethyl-3-methylimidazolium trifluoromethanesulfonate. Excess molar enthalpy was measured at 303.15 K whereas density and heat capacity were determined within the temperature range (293.15 to 318.15) K. From experimental data, excess molar volume and excess molar isobaric heat capacity were calculated. The analysis of the excess properties reveals important differences between the studied ionic liquids which can be ascribed to their capability to form hydrogen bonds with water molecules.     

Study of the volumetric properties of weakly associated alcohols by means of high-pressure speed of sound measurements

The speed of sound in the temperature (303.15 to 373.15) K and pressure range (0.1 to 100) MPa was measured for the liquid 3-pentanol, 3-methyl 3-pentanol, and 3-ethyl-3-pentanol. These results combined with the densities and isobaric heat capacity at atmospheric pressure obtained from the literature were used to calculate the density, and the isentropic and isothermal compressibilities in the same range of pressure and in the temperature interval (303.15 to 368.15) K by means of a predictor-corrector algorithm.     

Excess molar properties for binary systems of alkylimidazolium-based ionic liquids + nitromethane. Experimental results and ERAS-model calculations

Density, isobaric molar heat capacity, and excess molar enthalpy were experimentally determined at atmospheric pressure for a set of binary systems ionic liquid + nitromethane. The studied ionic liquids were: 1-butyl-3-methylimidazolium tetrafluoroborate, 1-hexyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylpyridinium tetrafluoroborate, 1-ethyl-3-methylimidazolium ethylsulfate, 1-butyl-3-methylimidazolium methylsulfate, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate, and 1-butyl-3-methylimidazolium trifluoromethanesulfonate. Density and heat capacity were obtained within the temperature range (293.15 to 318.15) K whereas excess molar enthalpy was measured at 303.15 K; excess molar volume and excess molar isobaric heat capacity were calculated from experimental data. The ERAS-model was applied in order to study the microscopic mechanisms involved in the mixing process. Although the studied compounds are not self-associated, ERAS-model describe adequately the experimental results if cross-association between both compounds is considered.     

Densities,excess molar volume,isothermal compressibility,and isobaric expansivity of (dimethyl carbonate + n-hexane) systems at temperatures (293.15 to 313.15) K and pressures from 0.1 MPa up to 40 MPa

The densities of dimethyl carbonate, n-hexane and their mixtures were measured for 12 compositions at five different temperatures varying from (293.15 to 313.15) K and over the pressure range of (0.1 to 40) MPa. The densities of pure substances and their mixtures at atmospheric pressure were measured by a vibrating-tube densimeter. The densities at high pressures were measured by a variable-volume autoclave and precise analytical balance. The excess molar volume, isothermal compressibility, and isobaric expansivity were derived from the experimental densities.     

Viscosity,density, and speed of sound of methylcyclopentane with primary and secondary alcohols at T = (293.15, 298.15, and 303.15) K

Viscosities, densities, and speed of sound have been measured over the whole composition range for (methylcyclopentane with ethanol, 1-propanol, 1-butanol, 2-propanol, 2-butanol, and 2-pentanol) at T = (293.15, 298.15, and 303.15) K and atmospheric pressure along with the properties of the pure components. Excess molar volumes, isentropic compressibility, deviations in isentropic compressibility, and viscosity deviations for the binary systems at the above-mentioned temperatures were calculated and fitted to Redlich–Kister equation to determine the fitting parameters and the root-mean square deviations. UNIQUAC equation was used to correlate the experimental data. Dynamic viscosities of the binary mixtures have been predicted using UNIFAC-VISCO and ASOG-VISCO methods.     

An experimental setup for isobaric heat capacities for viscous fluids at high pressure: Squalane,bis(2-ethylhexyl) sebacate and bis(2-ethylhexyl) phthalate

A high-pressure flow calorimeter has been used to determine highly accurate isobaric heat capacities for different viscous fluids, squalane (SQN), bis(2-ethylhexyl) sebacate (DEHS) and bis(2-ethylhexyl) phthalate (DEHP) from T = (293.15 to 353.15) K and up to 30 MPa. The experimental device was adapted for viscous liquids at high pressure and it can measure heat capacities with an estimated total uncertainty better than 1%. The isobaric heat capacity values were analysed together with their temperature and pressure dependences. In addition, a fitting equation of the experimental molar isobaric heat capacity for these viscous fluids as a function of temperature and pressure was proposed.     

Densities,excess volumes,isobaric expansivity,and isothermal compressibility of the (1-ethyl-3-methylimidazolium ethylsulfate + methanol) system at temperatures (283.15 to 333.15) K and pressures from (0.1 to 35) MPa

Densities of pure 1-ethyl-3-methylimidazolium ethylsulfate ionic liquid – [C₂mim][EtSO₄] and its mixtures with methanol have been measured with an accuracy of ±0.2 kg · m^?3, over the temperature range (283.15 to 333.15) K and pressure range (0.1 to 35) MPa, using a vibrating tube densimeter. Excess volumes have been calculated directly from the experimental densities. The latter data have been correlated by the Tait equation with the temperature dependent parameters for the pure ionic liquid and by a van Laar-type equation, involving parameters dependent on temperature and pressure for the mixtures. The isobaric expansivity, isothermal compressibility, and related excess properties have been calculated. The exceptionally strong influence of pressure and temperature on these properties has been observed.     

Solubility of carbon dioxide,methane, and ethane in 1-butanol and saturated liquid densities and viscosities

A designed pressure–volume–temperature (PVT) apparatus has been used to measure the (vapor + liquid) equilibrium properties of three binary mixtures (methane +, ethane +, and carbon dioxide + 1-butanol) at two temperatures (303 and 323) K and at the pressures up to 6 MPa. The solubility of the compressed gases in 1-butanol and the saturated liquid densities and viscosities were measured. In addition, the density and viscosity of pure 1-butanol were measured at two temperatures (303 and 323) K and at the pressures up to 10 MPa. The experimental results show that the solubility of the gases in 1-butanol increases with pressure and decreases with temperature. The dissolution of gases in 1-butanol causes a decline in the viscosity of liquid phase. The saturated liquid density follows a decreasing trend with the solubility of methane and ethane. However, the dissolution of carbon dioxide in 1-butanol leads to an increase in the density of liquid phase. The experimental data are well correlated with Soave–Redlich–Kwong (SRK) and Peng–Robinson (PR) equations of state (EOSs). SRK EOS was slightly superior for correlating the saturated liquid densities.     

Osmotic and apparent molar properties of binary mixtures alcohol + 1-butyl-3-methylimidazolium trifluoromethanesulfonate ionic liquid

In this work, physical properties (densities and speeds of sound) for the binary systems {1-propanol, or 2-propanol, or 1-butanol, or 2-butanol, or 1-pentanol + 1-butyl-3-methylimidazolium trifluoromethanesulfonate} were experimentally measured from T = (293.15 to 323.15) K and at atmospheric pressure. These data were used to calculate the apparent molar volume and apparent molar isentropic compression which were fitted to a Redlich–Meyer type equation. This fit was used to obtain the corresponding apparent molar properties at infinite dilution. On the other hand, the osmotic and activity coefficients and vapor pressures of these binary mixtures were also determined at T = 323.15 K using the vapor pressure osmometry technique. The Extended Pitzer model of Archer was employed to correlate the experimental osmotic coefficients. From the parameters obtained in the correlation, the mean molal activity coefficients and the excess Gibbs free energy for the studied mixtures were calculated.     

Thermodynamic and transport properties of (1-Butanol + 1,4-Butanediol) at temperatures from (298.15 to 318.15) K

Densities and kinematic viscosities have been measured for (1-butanol + 1,4-butanediol) over the temperature range from (298.15 to 318.15) K. The speeds of sound within the temperature range from (293.15 to 318.15) K have been measured as well. Using these results and literature values of isobaric heat capacities, the molar volumes, isentropic and isothermal compressibility coefficients, molar isentropic and isothermal compressibilities, isochoric heat capacities as well as internal pressures were calculated. Also the corresponding excess and deviation values (excess molar volumes, excess isentropic and isothermal compressibility coefficients, excess molar isentropic and isothermal compressibilities, different defined deviation speed of sound and dynamic viscosity deviations) were calculated. The excess values are negative over the whole concentration and temperature range. The excess and deviation values are expressed by Redlich–Kister polynomials and discussed in terms of the variations of the structure of the system caused by the participation of the two different alcohol molecules in the dynamic intermolecular association process through hydrogen bonding at various temperatures. The predictive abilities of Grunberg–Nissan and McAllister equations for viscosities of mixtures have also been examined.     

Thermodynamic and acoustic properties of (heptane + dodecane) mixtures under elevated pressures

The speed of sound in (heptane + dodecane) mixtures was measured over the whole concentration range at pressures up to 101 MPa and within the temperature range from (293 to 318) K. The density of (heptane + dodecane) was measured in the whole composition range under atmospheric pressure and at temperatures from (293 to 318) K. The densities and heat capacities of these binaries at the same temperatures were calculated for pressures up to 100 MPa from the speeds of sound under elevated pressures together with the densities and heat capacities at atmospheric pressure. The effects of pressure and temperature on the excess molar volume and the excess molar heat capacity are discussed.     

Thermodynamic properties and equation of state of liquid di-isodecyl phthalate at temperature between (273 and 423) K and at pressures up to 140 MPa

We report measurements of the thermodynamic properties of liquid di-isodecyl phthalate (DIDP) and an equation of state determined therefrom. The speed of sound in DIDP was measured at temperatures between (293.15 and 413.15) K and a pressures between (0.1 and 140) MPa with a relative uncertainty of 0.1%. In addition, the isobaric specific heat capacity was measured at temperatures between (293.15 and 423.15) K at a pressure of 0.1 MPa with a relative uncertainty of 1%, and the density was measured at temperatures between (273.15 and 413.15) K at a pressure of 0.1 MPa with a relative uncertainty of 0.015%. The thermodynamic properties of DIDP were obtained from the measured speeds of sound by thermodynamic integration starting from the initial values of density and isobaric specific heat capacity obtained experimentally. The results have been represented by a new equation of state containing nine parameters with an uncertainty in density not worse than 0.025%. Comparisons with literature data are made.     

Isobaric vapor–liquid phase equilibria for the binary systems of tert-butanol + 2-ethyl-1-hexanol and n-butanol + 2-ethyl-1-hexanol

Isobaric vapor–liquid equilibria for the binary mixtures of tert-butanol (TBA) + 2-ethyl-1-hexanol and n-butanol (NBA) + 2-ethyl-1-hexanol were experimentally investigated at atmospheric pressure in the temperature range of 353.2–458.2 K. The raw experimental data were correlated using the UNIQUAC and NRTL models and used to estimate the interaction parameters between each pair of components in the systems. The experimental activity coefficients were obtained using the gas chromatographic method and compared with the calculated data obtained from these equilibrium models. The results show that UNIQUAC model gives better correlation than NRTL for these binary systems. The liquid–liquid extraction of TBA from aqueous solution using 2-ethyl-1-hexanol was demonstrated by simulation and the variation of separation factor of TBA at several temperatures was reported.     

Speed of sound,density, and heat capacity for (2-methyl-2-butanol + heptane) at pressures up to 100 MPa and temperatures from (293 to 318) K. Experimental results and theoretical investigations

In this paper, some new physicochemical properties of (2-methyl-2-butanol + heptane) are investigated using an acoustic method. Of clear interest to us is the study of the effect of branched structure of alcohol on association in mixtures with heptane and consequently, the effect of temperature and pressure on deviations from ideal solution behaviour. Thus, this work presents experimental properties and theoretical study of (2-methyl-2-butanol + heptane) as functions of temperature and pressure over the entire composition range. The densities and speeds of sound in (2-methyl-2-butanol + heptane) have been measured for temperatures ranging from (293 to 318) K under atmospheric pressure and under elevated pressures up to 101 MPa, respectively. The densities, heat capacities and appropriate excesses of these binaries were calculated for the same temperatures and for pressures up to 100 MPa. The acoustic method was applied in the calculations. The effects of pressure and temperature on the excess molar volume and the excess molar heat capacity of (2-methyl-2-butanol + heptane) are explained in terms of the influence of the molecular size and configuration of the alcohols on their self-association capability, packing effect, and the non-specific interactions between the 2-methyl-2-butanol and heptane basing on the results obtained from the modified ERAS model.     

The pρT behaviour of the lactate family

The densities of methyl lactate, ethyl lactate and butyl lactate have been measured using a high-pressure, high-temperature vibrating tube densimeter system over a temperature range from T = (283.15 to 338.15) K and a pressure range from p = (0.1 to 60.0) MPa. The experimental densities have been satisfactorily correlated with temperature and pressure using the TRIDEN equation. Finally, from the experimental densities, properties such as isobaric expansibility and isothermal compressibility have been calculated.     

Density,speed of sound,refractive index and dielectric permittivity of (diethyl carbonate + n -decane) at several temperatures

Density, speed of sound and refractive index values of (diethyl carbonate  + n -decane), were measured at the temperatures (288.15, 293.15, 298.15, and 308.15) K and atmospheric pressure. In addition, dielectric permittivities have been measured for the same mixture and at the same temperatures except at T =  293.15 K. Excess molar volumes, changes of isentropic compressibility on mixing, changes of refractive index on mixing and changes of dielectric permittivity on mixing were computed from the experimental data. The excess molar volumes were compared with predictions from the Nitta–Chao model.     

Experimental densities,dynamic viscosities and surface tensions of the ionic liquids series 1-ethyl-3-methylimidazolium acetate and dicyanamide and their binary and ternary mixtures with water and ethanol at T = (298.15 to 343.15 K)

In this paper, experimental densities and dynamic viscosities of 1-ethyl-3-methylimidazolium based ionic liquids (ILs) with the anions acetate and dicyanamide are presented in a wide temperature range (298.15 to 343.15 K) at atmospheric pressure. Surface tension of these ILs was measured at T = 298.15 K. The effect of water and/or ethanol compositions on densities and dynamic viscosities of these ILs are studied in binary and ternary mixtures. A quadratic mixing rule was used to correlate binary and ternary liquid densities. The Eyring–Patel–Teja model, which is recommended for polar and aqueous systems, is used to correlate dynamic viscosity data over the whole range of compositions and temperatures in binary and ternary mixtures. Temperature-dependent interaction parameters are introduced here to account for the changes of viscosities with temperature showing good agreements with experimental data.     

Isobaric (vapour + liquid) equilibria data for the binary systems {1,2-dichloroethane (1) + toluene (2)} and {1,2-dichloroethane (1) + acetic acid (2)} at atmospheric pressure

In this study for two binary systems {1,2-dichloroethane (1) + toluene (2)} and {1,2- dichloroethane (1) + acetic acid (2)}, the isobaric (vapour + liquid) equilibrium (VLE) data have been measured at atmospheric pressure. An all-glass Fischer–Labodest type capable of handling pressures from (0.25 to 400) kPa and temperatures up to 523.15 K was used. Experimental uncertainties for pressure, temperature, and composition have been calculated for each binary system. The data were correlated by means of the NRTL, UNIQUAC, UNIFAC, and Wilson models with satisfactory results.