Highly Efficient Etherification and Oxidation of Aromatic Alcohols Using Supported and Unsupported Phosphorus Pentoxide as a Heterogeneous Reagent

A highly efficient procedure for etherification and oxidation of aromatic alcohol is described using unsupported and supported P₂O₅ on alumina and/or silica gel. The silica gel and alumina proved to be the most suitable support among the supports examined in our experiments. It was illustrated that the etherification and oxidative performance in reactions depend largely upon variables including reaction temperature, the nature of the P₂O₅ used (supported or unsupported P₂O₅), and whether solvent-free conditions are applied. It was shown that P₂O₅ not only can convert the aromatic alcohols into corresponding ethers and/or aldehyde and ketone but also can convert aromatic ethers into aldehyde or ketone via oxidative cleavage. Finally, quantum mechanical calculations were performed to rationalized these events, and it was indicated that aldehyde and ketone are more favorable products on the basis of the heat of formation (ΔH_f).

Efficient Multi‐component Synthesis of Highly Substituted Imidazoles Utilizing P2O5/SiO2 as a Reusable Catalyst

Phosphorus pentoxide supported on silica gel (P₂O₅/SiO₂) has been used as an efficient and reusable catalyst for the one‐pot pseudo four‐component synthesis of 2,4,5‐trisubstituted imidazoles from benzil or benzoin, aldehydes, and ammonium acetate. It was also used for four‐component preparation of 1,2,4,5‐tetrasubstituted imidazoles from benzil or benzoin, aldehydes, primary amine, and ammonium acetate under thermal solvent‐free conditions. The remarkable features of this new procedure are high conversions, cleaner reaction, simple experimental and work‐up procedures and also the catalyst can be easily separated from the reaction mixture and reused several times without any loss of its activity.     

2‐(1H‐Benzotriazole‐1‐yl)‐1,1,3,3‐Tetramethyluronium Tetrafluoro Borate (TBTU) as an Efficient Coupling Reagent for the Esterification of Carboxylic acids with Alcohols and Phenols at Room Temperature

Esterification of carboxylic acids with alcohols and phenols by using 2‐(1H‐benzotriazole‐1‐yl)‐1,1,3,3‐tetramethyluronium tetrafluoroborate (TBTU) in the presence of triethylamine as a base proceeded smoothly under mild conditions to afford the corresponding esters in good to high yields in acetonitrile at room temperature.     

Silica‐supported polymeric monolithic column with a mixed mode of hydrophilic and strong cation‐exchange interactions for microcolumn liquid chromatography

A novel sulfonic acid group containing hydrophilic strong cation‐exchange monolith was prepared by in situ coating 5 μm bare silica particles with the copolymers of glycidyl methacrylate and pentaerythritol triacrylate and further sulfonating the prepared polymer matrix with Na₂SO₃ inside a 150 μm id capillary. The preparation conditions were investigated, and the method was described in detail. The prepared column was characterized by comparing with its counterparts reported previously in terms of matrix morphology, preparation reproducibility, permeability, swelling–shrinking behavior, mechanical stability, hydrophilicity, binding capacity, and column efficiency. The swelling–shrinking behavior of the present column in solvents of different polarities was negligible, the hydrophobicity could be suppressed at the acetonitrile concentrations higher than 40% v/v, and the binding capacities were 256 μequiv/mL and 20.1 mg/mL for Cu²⁺ and lysozyme, respectively. The minimum theoretical plate heights were 8, 10, and 13 μm, and the values of the C term in van Deemter equation were 9, 12, and 35 ms for the test analytes of Na⁺, thiourea, and cytidine 5ʹ‐monophosphate, respectively. This column exhibited an excellent performance in the separations of monovalent inorganic cations, uncharged polar, and charged polar compounds.     

Chitosan‐Silica Sulfate Nano Hybrid as a Novel and Highly Proficient Heterogeneous Nano Catalyst for Regioselective Ring Opening of Epoxides via Carboxylic Acids

The synthesis and characterization of chitosan‐silica sulfate nano hybrid (CSSNH ) as a novel and efficient heterogeneous nano catalyst involving acid‐base bifunctional activity is described. The catalytic potency and activity of this eco‐friendly catalyst was investigated in regioselective ring opening of epoxides with carboxylic acids to access structurally diverse 1,2‐diol mono‐esters in good to excellent yields. CSSNH catalyst was characterized using different microscopic and spectroscopic techniques encompassing scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption isotherm, and Fourier transform infrared spectroscopy. The green nature, cheapness, efficiency, ease of preparation, handling and reusability of this new catalyst makes this catalyst to be useful for green industrial processes.     

Synthesis,Solid‐State NMR Characterization,and Application for Hydrogenation Reactions of a Novel Wilkinson’s‐Type Immobilized Catalyst

Silica nanoparticles (SiNPs) were chosen as a solid support material for the immobilization of a new Wilkinson’s‐type catalyst. In a first step, polymer molecules (poly(triphenylphosphine)ethylene (PTPPE); 4‐diphenylphosphine styrene as monomer) were grafted onto the silica nanoparticles by surface‐initiated photoinferter‐mediated polymerization (SI‐PIMP). The catalyst was then created by binding rhodium (Rh) to the polymer side chains, with RhCl₃ ? x H₂O as a precursor. The triphenylphosphine units and rhodium as Rh^I provide an environment to form Wilkinson’s catalyst‐like structures. Employing multinuclear (³¹P, ²⁹Si, and ¹³C) solid‐state NMR spectroscopy (SSNMR), the structure of the catalyst bound to the polymer and the intermediates of the grafting reaction have been characterized. Finally, first applications of this catalyst in hydrogenation reactions employing para‐enriched hydrogen gas (PHIP experiments) and an assessment of its leaching properties are presented.     

Comparing Long‐Chain Branching Mechanisms for Ethylene Polymerization with Metallocenes and Other Single‐Site Catalysts: What Simulated Microstructures Can Teach Us

Three different long‐chain branch (LCB) formation mechanisms for ethylene polymerization with metallocenes in solution polymerization semi‐batch and continuous stirred‐tank reactors are modeled to predict the microstructure of the resulting polymer. The three mechanisms are terminal branching, C–H bond activation, and intramolecular random incorporation. Selected polymerization parameters are varied to observe how each mechanism affects polymer microstructure. Increasing the ethylene concentration during semi‐batch polymerization reduces the LCB frequency of polymers made with the terminal branching and intramolecular mechanisms, but has no effect on those made with the C–H bond activation mechanism, which disagrees with most previous data published in the literature. The intramolecular mechanism predicts that LCB frequencies hardly depend on polymerization time or ethylene conversion, which also disagrees with the published experimental data for these systems. For continuous polymerization reactors, experimental data relating polydispersity to LCB frequency can be well described with the terminal branching mechanism, but both C–H bond activation and intramolecular models fail to describe this experimental relationship. Therefore, detailed simulations confirm that the terminal branching mechanism is indeed the most likely mechanism for LCB formation when ethylene is polymerized with single‐site coordination catalysts such as metallocenes in solution polymerization reactors.     

Silica‐supported Cu(II)–quinoline complex: Efficient and recyclable nanocatalyst for one‐pot synthesis of benzimidazolquinoline derivatives and 2H‐indazoles

The synthesis, characterization and catalytic activity of a Cu(II) complex derived from 2‐oxoquinoline‐3‐carbaldehyde Schiff base supported on amino‐functionalized silica are reported. 3‐(1H‐Benzo[d]imidazol‐2‐yl)quinolines containing piperidine, morpholine and phenylpiperazine skeletons at the C‐2 position were formed in good to excellent yields via the one‐pot reaction of 2‐chloroquinoline‐3‐carbaldehyde, benzene‐1,2‐diamines and secondary amines in the presence of the nanocatalyst under mild conditions. Moreover, the nanocatalyst was found to be recyclable for up to seven runs without significant loss of activity. Also, a series of 2H‐indazoles were synthesized by the catalytic condensation of 2‐bromobenzaldehyde, sodium azide and primary amines.     

KF‐Melamine Formaldehyde Resin (KF‐MFR) as a Versatile and Efficient Heterogeneous Reagent for Aldol Condensation of Aldehydes and Ketones under Microwave Irradiation

KF‐Melamine formaldehyde resin (KF‐MFR) was demonstrated to be a highly efficient heterogenious catalyst for cross‐aldol condensation under microwave irradiation. In this synthesis, various aldehydes and ketones were condensed together in the presence of supported KF on melamine‐formaldehyde resin to afford different chalcone derivatives in good to excellent yields. KF‐MFR proved to have unique termal and chemical resistance and can be reused for many consecutive runs without remarkable loss in catalytic activity.     

PSYCHE CPMG–HSQMBC: An NMR Spectroscopic Method for Precise and Simple Measurement of Long‐Range Heteronuclear Coupling Constants

Among the NMR spectroscopic parameters, long‐range heteronuclear coupling constants convey invaluable information on torsion angles relevant to glycosidic linkages of carbohydrates. A broadband homonuclear decoupled PSYCHE CPMG–HSQMBC method for the precise and direct measurement of multiple‐bond heteronuclear couplings is presented. The PSYCHE scheme built into the pulse sequence efficiently eliminates unwanted proton–proton splittings from the heteronuclear multiplets so that the desired heteronuclear couplings can be determined simply by measuring frequency differences between peak maxima of pure antiphase doublets. Moreover, PSYCHE CPMG–HSQMBC can provide significant improvement in sensitivity as compared to an earlier Zangger–Sterk‐based method. Applications of the proposed pulse sequence are demonstrated for the extraction of ⁿJ(¹H,⁷⁷Se) and ⁿJ(¹H,¹³C) values, respectively, in carbohydrates; further extensions can be envisioned in any J‐based structural and conformational studies.     

Cross‐linked poly(4‐vinylpyridine/styrene) copolymer‐supported bismuth(III) triflate: an efficient heterogeneous catalyst for silylation of alcohols and phenols with HMDS

Cross‐linked poly(4‐vinylpyridine/styrene) copolymer‐supported bismuth(III) triflate (³⁰P/S‐Bi) effectively activates hexamethyldisilazane (HMDS) for the silylation of alcohols and phenols. By the use of this heterogeneous catalytic system, a wide range of alcohols as well as phenols are converted into their corresponding trimethylsilyl ethers in high yield under mild reaction conditions. The catalyst was reused more than 10 times without significant loss of its catalytic activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Boronate Ligands in Materials: Determining Their Local Environment by Using a Combination of IR/Solid‐State NMR Spectroscopies and DFT Calculations

Boronic acids (R‐B(OH)₂) are a family of molecules that have found a large number of applications in materials science. In contrast, boronate anions (R‐B(OH)₃^?) have hardly been used so far for the preparation of novel materials. Here, a new crystalline phase involving a boronate ligand is described, Ca[C₄H₉‐B(OH)₃]₂, which is then used as a basis for the establishment of the spectroscopic signatures of boronates in the solid state. The phase was characterized by IR and multinuclear solid‐state NMR spectroscopy (¹H, ¹³C, ¹¹B and ⁴³Ca), and then modeled by periodic DFT calculations. Anharmonic OH vibration frequencies were calculated as well as NMR parameters (by using the Gauge Including Projector Augmented Wave—GIPAW—method). These data allow relationships between the geometry around the OH groups in boronates and the IR and ¹H NMR spectroscopic data to be established, which will be key to the future interpretation of the spectra of more complex organic–inorganic materials containing boronate building blocks.     

Xanthan Sulfuric Acid: An Efficient Bio‐supported and Recyclable Solid Acid Catalyst for the Synthesis of 2‐Aryl Thiadiazolo Benzimidazoles

Xanthan sulfuric acid is an efficient solid acid catalyst for the preparation of 2‐aryl benzimidazoles in excellent yields. This method is applicable for the reaction of benzo[c][1,2,5]thiadiazole‐4,5‐diamine with aldehydes by simple physical grinding at room temperature. The salient features of the present methodology is cheaper process, easy synthesis of stable catalyst and the catalyst can be easily recycled without significant loss of activity.     

2,6‐Dicarboxypyridinium Fluorochromate: A Mild and Efficient Reagent for Oxidative Deprotection of Oximes,Phenylhydrazones, and Semicarbazones to Their Corresponding Carbonyl Compounds under Solvent‐Free Conditions

2,6‐Dicarboxypyridinium fluorochromate as a new, rapid, and efficient reagent was prepared and used for the oxidative deprotection of oximes, phenylhydrazones, and semicarbazones to their carbonyl analogues under solvent‐free conditions at room temperature.     

Nanomagnetic‐supported Sulfonic Acid: Simple and Rapid Method for the Synthesis of α,α′‐Bis‐(substituted‐benzylidene) Cycloalkanones

Nanomagnetic‐supported sulfonic acid is found to be a powerful and reusable heterogeneous catalyst for the rapid synthesis of α,α′‐bis‐(substituted‐benzylidene)cycloalkanones under conventional heating and solvent free conditions. High yield, simple work up and easy recovery of the catalyst are the most obvious advantages of this procedure.     

Oxyma: An Efficient Additive for Peptide Synthesis to Replace the Benzotriazole‐Based HOBt and HOAt with a Lower Risk of Explosion[1]

Oxyma [ethyl 2‐cyano‐2‐(hydroxyimino)acetate] has been tested as an additive for use in the carbodiimide approach for formation of peptide bonds. Its performance in relation to those of HOBt and HOAt, which have recently been reported to exhibit explosive properties, is reported. Oxyma displayed a remarkable capacity to inhibit racemization, together with impressive coupling efficiency in both automated and manual synthesis, superior to those of HOBt and at least comparable to those of HOAt, and surpassing the latter coupling agent in the more demanding peptide models. Stability assays showed that there was no risk of capping the resin under standard coupling conditions. Finally, calorimetry assays (DSC and ARC) showed decomposition profiles for benzotriazole‐based additives that were consistent with their reported explosivities and suggested a lower risk of explosion in the case of Oxyma.     

General Method for the 11C‐Labeling of 2‐Arylpropionic Acids and Their Esters: Construction of a PET Tracer Library for a Study of Biological Events Involved in COXs Expression

Cyclooxygenase (COX) is a critical enzyme in prostaglandin biosynthesis that modulates a wide range of biological functions, such as pain, fever, and so on. To perform in vivo COX imaging by positron emission tomography (PET), we developed a method to incorporate ¹¹C radionuclide into various 2‐arylpropionic acids that have a common methylated structure, particularly among nonsteroidal anti‐inflammatory drugs (NSAIDs). Thus, we developed a novel ¹¹C‐radiolabeling methodology based on rapid C‐[¹¹C]methylation by the reaction of [¹¹C]CH₃I with enolate intermediates generated from the corresponding esters under basic conditions. One‐pot hydrolysis of the above [¹¹C]methylation products also allows the synthesis of desired ¹¹C‐incorporated acids. We demonstrated the utility of this method in the syntheses of six PET tracers, [¹¹C]Ibuprofen, [¹¹C]Naproxen, [¹¹C]Flurbiprofen, [¹¹C]Fenoprofen, [¹¹C]Ketoprofen, and [¹¹C]Loxoprofen. Notably, we found that their methyl esters were particularly useful as proradiotracers for a study of neuroinflammation. The microPET studies of rats with lipopolysaccharide (LPS)‐induced brain inflammation clearly showed that the radioactivity of PET tracers accumulated in the inflamed region. Among these PET tracers, the specificity of [¹¹C]Ketoprofen methyl ester was demonstrated by a blocking study. Metabolite analysis in the rat brain revealed that the methyl esters were initially taken up in the brain and then underwent hydrolysis to form pharmacologically active forms of the corresponding acids. Thus, we succeeded in general ¹¹C‐labeling of 2‐arylpropionic acids and their methyl esters as PET tracers of NSAIDs to construct a potentially useful PET tracer library for in vivo imaging of inflammation involved in COXs expression.