The non-isothermal thermogravimetric tests of animal bones combustion. Part. I. Kinetic analysis

The non-isothermal combustion of animal bones was investigated by simultaneous thermogravimetric and differential thermal analysis (TG–DTA), in the temperature range ΔT = 20–650 °C. The full kinetic triplet (A, E_a and f(α)) for the investigated process was established, using different calculation procedures: isoconversional (model-free) and the Kissinger's methods. The non-isothermal process occured through three reaction stages (I, II and III). Stage I was described by a reaction model, which contains two competing reactions with different values of the apparent activation energy. The autocatalytic two-parameter Šesták–Berggren (SB) model (conversion function f(α) = α^0.62(1 − α)^3.22), best described the second (II) reaction stage of bone samples. This stage, which corresponds to the degradation process of organic components (mainly collagen), exhibited the autocatalytic branching effect, with increasing complexity. Stage III, attributed to the combustion process of organic components, was best described by an n-th reaction order model with parameter n = 1.5 (f(α) = (1 − α)^1.5). The appearance of compensation effect clearly showed the existence of three characteristic branches attributed to the dehydration, degradation and combustion processes, respectively, without noticable changes in mineral phase. The isothermal predictions of bone combustion process, at four different temperatures (T_iso = 200, 300, 400 and 450 °C) were established in this paper. It was concluded that the shapes of the isothermal conversion curves at lower temperatures (200–300 °C) were similar, whereas became more complex with further temperature increase due to organic phase degradation.     

Reaction of secondary phosphine selenides with the system Se/MOH (M = Li, Na, K, Rb, Cs): A novel three-component synthesis of diorganodiselenophosphinates

Secondary phosphine selenides, R₂P(Se)H (R = PhCH₂CH₂, PhCH(Me)CH₂, 4-t-BuC₆H₄CH₂CH₂, NaphthylCH₂CH₂, Ph), react with the system Se/MOH (M = Li, Na, K, Rb, Cs) in the system THF/EtOH at ambient temperature unusually fast (20–30 s) to give cleanly and almost quantitatively (in 94–100% yield) earlier unknown diorganodiselenophosphinates of alkali metals.     

Lithiated γ-O-functionalized propyl phenyl sulfides and sulfones of the type Li[CH(SOxPh)CH2CH2OR] (x = 0, 2). [Li{CH(SPh)CH2CH2Ot-Bu}(tmeda)] – A structurally characterized organolithium inner complex

Lithiation of O-functionalized alkyl phenyl sulfides PhSCH₂CH₂CH₂OR (R = Me, 1a; i-Pr, 1b; t-Bu, 1c; CPh₃, 1d) with n-BuLi/tmeda in n-pentane resulted in the formation of α- and ortho-lithiated compounds [Li{CH(SPh)CH₂CH₂OR}(tmeda)] (α-2a–d) and [Li{o-C₆H₄SCH₂CH₂CH₂OR)(tmeda)] (o-2a–d), respectively, which has been proved by subsequent reaction with n-Bu₃SnCl yielding the requisite stannylated γ-OR-functionalized propyl phenyl sulfides n-Bu₃SnCH(SPh)CH₂CH₂OR (α-3a–d) and n-Bu₃Sn(o-C₆H₄SCH₂CH₂CH₂OR) (o-3a–d). The α/ortho ratios were found to be dependent on the sterical demand of the substituent R. Stannylated alkyl phenyl sulfides α-3a–c were found to react with n-BuLi/tmeda and n-BuLi yielding the pure α-lithiated compounds α-2a–c and [Li{CH(SPh)CH₂CH₂OR}] (α-4a–b), respectively, as white to yellowish powders. Single-crystal X-ray diffraction analysis of [Li{CH(SPh)CH₂CH₂Ot-Bu}(tmeda)] (α-2c) exhibited a distorted tetrahedral coordination of lithium having a chelating tmeda ligand and a C,O coordinated organyl ligand. Thus, α-2c is a typical organolithium inner complex.Lithiation of O-functionalized alkyl phenyl sulfones PhSO₂CH₂CH₂CH₂OR (R = Me, 5a; i-Pr, 5b; CPh₃, 5c) with n-BuLi resulted in the exclusive formation of the α-lithiated products Li[CH(SO₂Ph)CH₂CH₂OR] (6a–c) that were found to react with n-Bu₃SnCl yielding the requisite α-stannylated compounds n-Bu₃SnCH(SO₂Ph)CH₂CH₂OR (7a–c). The identities of all lithium and tin compounds have been unambiguously proved by NMR spectroscopy (¹H, ¹³C, ¹¹⁹Sn).     

Effect of chelating agent on the oxidation rate of PCP in the magnetite/H2O2 system at neutral pH

The complex [Rh(CO)₂Cl]₂ reacts with two molar equivalent of pyridine carboxylic acids ligands Py-2-COOH(a), Py-3-COOH(b) and Py-4-COOH(c) to yield rhodium(I) dicarbonyl chelate complex [Rh(CO)₂(L^/)](1a) {L^/ = η²-(N,O) coordinated Py-2-COO⁻(a^/)} and non-chelate complexes [Rh(CO)₂ClL^//](1b,c) {L^// = η¹-(N) coordinated Py-3-COOH(b), Py-4-COOH(c)}. The complexes 1 undergo oxidative addition (OA) reactions with different electrophiles such as CH₃I, C₂H₅I, C₆H₅CH₂Cl and I₂ to give penta coordinated Rh(III) complexes of the types [Rh(CO)(CORⁿ)XL^/], {n = 1,2,3; R¹ = CH₃(2a); R² = C₂H₅(3a); X = I and R³ = CH₂C₆H₅ (4a); X = Cl}, [Rh(CO)I₂L^/](5a), [Rh(CO)(CORⁿ)ClXL^//] {R¹ = CH₃(6b,c); R² = C₂H₅(7b,c); X = I and R³ = CH₂C₆H₅ (8b,c); X = Cl} and [Rh(CO)ClI₂L^//](9b,c). The complexes have been characterized by elemental analysis, IR and ¹H NMR spectroscopy. Kinetic data for the reaction of 1a–b with CH₃I indicate a first order reaction. The catalytic activity of 1a–c for the carbonylation of methanol to acetic acid and its ester is evaluated and a higher turn over number (TON = 810–1094) is obtained compared with that of the well-known commercial species [Rh(CO)₂I₂]⁻ (TON = 653) at mild reaction conditions (temperature 130 ± 5 °C, pressure 35 ± 5 bar).     

Size-dependent reactivity of cobalt cluster ions with nitrogen monoxide: Competition between chemisorption and decomposition of NO

Reactions of NO molecules on cobalt cluster ions were studied in a beam-gas geometry by using a tandem mass spectrometer. Single-particle collision reactions of Co_mNO⁺ (m = 3–10) with NO were found to proceed in such a manner that NO decomposition dominates at m = 4–6 with the maximum reaction cross section at m = 5 and chemisorption dominates in m ≥ 7. On the other hand, in two-particle collision reactions of Co_n⁺ (n = 2–10) with NO, NO decomposition at n ≥ 5 and chemisorption of two NO molecules with Co atoms loss at n ≥ 8 were found to proceed. These results indicate that the size-dependency of the multiple collision reactions originates from secondary attacking of an NO molecule to primary products of the initial single collision reactions. The DFT calculation supports the scheme that both the decomposition and chemisorption of two-particle collision reactions proceed via a common intermediate, Co_mN₂O₂⁺, in which the two NO molecules are dissociatively chemisorbed on the cobalt cluster ion, and the size-dependency of the two-particle collision reactions is explained in terms of the structure of this reaction intermediate.     

Rhodium(I) carbonyl complexes of chalcogen functionalized tripodal phosphines, [CH3C(CH2P(X)Ph2)3] {X = O, S, Se} and their reactivity

The reaction of dimeric rhodium precursor [Rh(CO)₂Cl]₂ with two molar equivalent of 1,1,1-tris(diphenylphosphinomethyl)ethane trichalcogenide ligands, [CH₃C(CH₂P(X)Ph₂)₃](L), where X = O(a), S(b) and Se(c) affords the complexes of the type [Rh(CO)₂Cl(L)] (1a–1c). The complexes 1a–1c have been characterized by elemental analyses, mass spectrometry, IR and NMR (¹H, ³¹P and ¹³C) spectroscopy and the ligands a–c are structurally determined by single crystal X-ray diffraction. 1a–1c undergo oxidative addition (OA) reactions with different electrophiles such as CH₃I, C₂H₅I and C₆H₅CH₂Cl to give Rh(III) complexes of the types [Rh(CO)(COR)ClXL] {R = –CH₃ (2a–2c), –C₂H₅ (3a–3c); X = I and R = –CH₂C₆H₅ (4a–4c); X = Cl}. Kinetic data for the reaction of a–c with CH₃I indicate a first-order reaction. The catalytic activity of 1a–1c for the carbonylation of methanol to acetic acid and its ester is evaluated and a higher turn over number (TON = 1564–1723) is obtained compared to that of the well-known commercial species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature 130 ± 2 °C, pressure 30 ± 2 bar and time 1 h.     

Spectrophotometric study of the complexation of iodine with 1,7-diaza-15-crown-5 in chloroform solution

The complex formation reaction between iodine and 1,7-diaza-15-crown-5 (DA15C5) has been studied spectrophotometrically in chloroform at 25°C. The resulting 1:2 (DA15C5:I₂) molecular complex was formulated as (DA15C5...;I⁺)I ₃ ^– . The spectrophotometric results, as well as the conductivity measurements, revealed that the gradual release of triiodide ion from its contact ion paired form in the molecular complex into the solution is the rate determining step of the reaction. The rate constant was calculated ask=(8.8±0.2)×10^–3 min^–1. The formation constant of the molecular complex was evaluated from the computer fitting of the absorbance-mole ratio data as logK _f=6.89±0.09.     

Nitrogen-containing organosilicon compounds

Fifteen previously unknown piperidinosilanes of the type R_4–m Si[(CH₂) _n NC₅H₁₀] _m (m=1–3; n=0–3). have been synthesized by the reaction of piperidine with diethylaminotrimethylsilane, bis(diethylamino)dimethylsilane, chlorobis(dimethylamino)methylsilane, trichloro(methyl)silane, trialkyl(chloromethyl)silanes, dialkoxy(alkyl)(chloromethyl)silanes, trialkylvinylsilanes, trialkyl(3-chloropropyl)silanes, and 3-chloropropyl(diethoxy)methylsilane. The piperidinosilanes (n>0) have been converted into the corresponding hydrochlorides and methiodides.For part VIII, see [1].     

Palladium-catalyzed phenyl-selenylation with n-Bu3SnSePh in one-pot two-step reactions

We have studied the Pd-catalyzed cross-coupling reaction of a stannane derived from selenium n-Bu₃SnSePh (1) with aryl and perfluoroalkyl iodides. Herein a very efficient one-pot two-step selenylation reaction to form a C-Se bond is reported. Ph₂Se₂ reacts with Na metal in liquid ammonia yielding PhSe⁻ ions. To this solution n-Bu₃SnCl was added to afford 1, which was introduced in the palladium-catalyzed coupling reaction without isolation. These reactions afford functionalized diarylselenides and phenylperfluroalkyl selenides from good to high yields (38-98%).     

Alkyliminophosphorsäuretrihalogenide, 1. Mitt.: Halogenaustausch zwischen (CH3NPCl3)2 und (CH3NPF3)2

Zusammenfassung Durch Reaktion von dimerem Methyliminophosphorsäuretrichlorid mit dimerem Methyliminophosphorsäuretrifluorid werden die gemischt halogenierten dimeren Methyliminophosphorsäuretrihalogenide der allgemeinen Zusammensetzung (CH₃NP)₂Cl _n F_6–n mitn=1–5 dargestellt. Die analytischen Daten und die IR-Spektren werden mitgeteilt.

---

Alkylimino phosphoric acid trihalogenides, I.: Halogen exchange between (CH₃NPCl₃)₂ and (CH₃NPF₃)₂

The reaction of (CH₃NPCl₃)₂ and (CH₃NPF₃)₂ yields the unknown 1.3-diaza-2.4-fluorochloro-phosphetidines of the general formula (CH₃NP)₂Cl _n F_6–n withn=1–5. The synthesis, the analytical data and the IR-spectra are reported.

     

Trichloro-mono- β -diketonato oxorhenium(V) complexes: synthesis,characterization and crystal structure

Oxorhenium(V) complexes of β-diketonate systems have been synthesized and isolated in pure form. The red complexes n-Bu₄N[ReO(R₁COCHCOR₂)Cl₃] (acac, R₁=R₂=CH₃; bzac, R₁=CH₃ and R₂=C₆H₅; bzbz, R₁=R₂=C₆H₅) have been characterized by elemental analyses, spectroscopic and other physico-chemical tools. One complex, n-Bu₄N[ReO(bzbz)Cl₃] (1c) has been subjected to single-crystal X-ray analysis. In the structure of the anion, the metal has a six-coordinate octahedral environment in which the bidentate β-diketone ligand is cis and trans to the terminal oxygen.     

A13C nuclear magnetic resonance study of some linear alkynyl gold(I) and silver(I) complexes

Summary Phenylacetylide gold(I) and silver(I) compounds of the type [n-Bu₄N][M(C=CPh)₂], (1) and [n-Bu₄N][XMC=CPh], (2) have been studied by¹³C n.m.r. spectroscopy and their chemical shifts are reported for the first time. The shielding of the alkynyl carbon linked directly to the metal in (2) isca. 10–15 ppm less than the analogous carbon in (1) (M=Au), andca. 6–11 ppm less in the silver complexes (M=Ag). The variation in chemical shift depends on the nature of X(X=Cl, Br, I, C₂Ph and Ph₃P) and indicates greatly different degrees of polarization of the Au-C= (or Ag-C=) bonds in (1) and (2). I.r. spectra of the title compounds are reported and confirm the weakness of ML back-bonding. Comparison is also made with¹³C and i.r. data for platinum, and mercury complexes.     

Scalar and quadrupolar intensity contributions in two-photon hyperfine structure transitions in europium

Two-photon transitions from the Eu I ground state 4f ⁷ 6s ² a ⁸ S _7/2 to odd levels with alsoJ=7/2 in the energy range of 34,000 – 36,700 cm^–1 were analysed due to their scalar and quadrupolar contributions. Their ratioR (g, e) were determined experimentally. In most cases the quadrupole contributions are dominant, i.e. 0R (g, e) _exp <>^–3. In the two-photon transition to the level 4f ⁷ 5d ^{2 8} F _7/2 the ratio is remarkably strong:R (g, e) _exp =134 (4)·10^–3. A theoretical estimation ofR (g, e) is not yet satisfying, due to strong configuration mixing in Eu.     

Electronic spectra of the linear magnesium-containing carbon chains MgC2nH (n = 1–5): A CASPT2 study

Complete active space self-consistent-field (CASSCF) approach has been used for the geometry optimization of the X²Σ⁺ and A²Π electronic states for the linear magnesium-containing carbon chains MgC_2nH (n = 1–5). Multireference second-order perturbation theory (CASPT2) has been used to calculate the vertical excitation energies from the ground to selected seven excited states, as well as the potential energy curves of two ²Σ⁺ and two ²Π electronic states. The studies indicate that the vertical excitation energies of the A²Π ← X²Σ⁺ transition for MgC_2nH (n = 1–5) are 2.837, 2.793, 2.767, 2.714, and 2.669 eV, respectively, showing remarkable linear size dependence. Compared with the previous TD-DFT and RCCSD(T) results, our estimates for MgC_2nH (n = 1–3) are in the best agreement with the available observed data of 2.83, 2.78, and 2.74 eV, respectively. In addition, the dissociation energies in MgC_2nH (n = 1–5) are also been evaluated.     

Separation of iron(III) and gold(III) by paper chromatography using mixed solvents containing diisopropyl ether

The separation of iron(III) and gold(III) by partition paper chromatography has been investigated employing a mixture of diisopropyl ether (IPE) and n-alcohol saturated with hydrochloric acid (initial acid concentration 5.0 M) as solvent. Methyl, ethyl, n-propyl, n-butyl, and n-pentyl alcohols were used as components of the solvent. The content of n-alcohol in the initial organic phase was varied. It was found that the R_f values for both of the metals increased with an increase in the carbon-to-oxygen ratio in the alcohol (except in the case or iron(III) and n-pentyl alcohol), and with an increase in the alcohol content in the initial organic phase (except in the case of iron(III) and n-propyl alcohol). The best separation results were obtained by using the systems: hydrochloric acid (5.0 M)-IPE-n-propyl alcohol (50:35:15) gDR_f = 0.56, hydrochloric acid (5.0 M)-IPE-ethyl alcohol (50:15:35) ΔR_f = 0.51, and hydrochloric acid (5.0 M)-IPE-n-pentyl alcohol (50:35:15) ΔR_f = 0.37.     

New optically active poly（amide-imide）s derived from N, N′-（4,4-diphthaloyl）-bis-L-leucine and hydantoin derivatives： Synthesis and properties

Six new optically active poly(amide-imide)s(5a-f) were synthesized through the direct polycondensation reaction of N,N'-(4,4'- diphthaloyl)-bis-L-leucine(3) with six hydantoin derivatives(4a-f).Triphenyl phosphite(TPP)/pyridine in the presence of calcium chloride(CaCl_2) and N-methyl-2-pyrrolidone(NMP) were successfully applied for direct polycondensation.The polycondensation reactions produce a series of new poly(amide-imide)s(5a-f) in high yields,and inherent viscosity between 0.42 and 0.55 dL/g.The re...     

Synthesis,crystal structure and magnetic property of bis(tetra-n-butylammonium) bis(4,5-dicyanobenzene-1,2-dithiolato) oxovanadium complex

The bis(dithiolene) oxovanadium complex, namely (n-Bu₄N)₂[(dcbdt)₂VO] (dcbdt = 4,5-dicyanobenzene-1,2-dithiolato), was unprecedentedly obtained from the reaction of Na₂dcbdt and vanadium trichloride. An X-ray structure analysis indicated that [(dcbdt)₂VO] moieties are surrounded by n-Bu₄N cations and there was no direct interaction among these moieties. Although there was no direct interaction among them, several S⋯H, C⋯H and N⋯H van der Waals contacts between n-Bu₄N cations and [(dcbdt)₂VO] moieties were observed. The ESR and SQUID measurement showed that the vanadium atom is in the state of V(IV) (S = 1/2) and these magnetic moments interact with each other very weakly antiferromagnetically (θ = -0.371 K).     

Structural studies on molecular complexes of polyethers. 4 Deoxycholic acid-polyether complexes

Complexes of deoxycholic acid with polyethers, [–(CH₂) _m–1CHR–O–] _n (R=H,m=2–4, 6 andR=CH₃,m=2), were prepared. The crystals are orthorhombic and similar to those most commonly observed for complexes with low molecular weight molecules. Dimensiona in the poly(propylene oxide) complex is about 1 Å longer than those in other polyether complexes, whileb andc do not differ much in these DCA-polyether complexes.     

A novel fluorescent distinguished probe for Cr (VI) in aqueous solution

Salicylaldehyde rhodamine B hydrazone (SRBH) was developed as a new spectrofluorimetric probe for the selective and sensitive detection of CrO₄²⁻ in acidic conditions. The proposed method was based on the special oxidation reaction between non-fluorescent SRBH by potassium dichromate to produce a highly fluorescent rhodamine B, as a product. Under the optimum conditions described, the fluorescence enhancement at 591 nm was good linearly related to the concentration of CrO₄²⁻ from 1.0 × 10⁻⁸ to 3.0 × 10⁻⁷ M (0.42–12.6 ng mL⁻¹) with a correlation coefficient of R² = 0.9989 (n = 10) and a detection limit of 1.5 × 10⁻⁹ M (0.063 ng mL⁻¹). The relative standard deviation (R.S.D.) was 2.0% (n = 6). The proposed method was also successfully applied to the determination of chromium (VI) in drinking water, river water and synthetic samples.     

A manganese sulfite with extended metal–oxygen–metal bonds exhibiting hydrogen uptake

A manganese sulfite of the formula Mn₅(OH)₄(SO₃)₃·2H₂O, I{a=7.5759(7) Å, b=8.4749(8) Å, c=10.852(1) Å, β=100.732(2)°, Z=2, space group=P2₁/m (no. 11), R₁=0.0399 and wR₂=0.1121 [for R indexes I>2σ(I)]}, comprising Mn₃O₁₄ units and extended Mn–O–Mn bonds along the three dimensions has been synthesized under hydrothermal conditions. It has narrow channels along the b-axis and exhibits hydrogen storage of 2.1 wt% at 300 K and 134 bar.