Monodisperse thermosensitive particles prepared by emulsifier-free emulsion polymerization with microwave irradiation

The emulsifier-free emulsion polymerization of styrene (St) and N-isopropylacrylamide (NIPAAm) was successfully carried out with microwave irradiation, and the monodisperse thermoresponsive poly(styrene-co-N-isopropylacrylamide) (poly(St-co-NIPAAm)) particles with diameters in the range 100–130 nm were prepared. The morphology, size and size distribution of the poly(St-co-NIPAAm) particles were characterized by transmission electron microscopy, scanning electron microscopy (SEM) and photon correlation spectroscopy (PCS), respectively. The results showed that poly(St-co-NIPAAm) particles had spherical morphology, and the poly(St-co-NIPAAm) particles prepared by emulsifier-free emulsion polymerization with microwave irradiation were smaller, more uniform than those obtained with conventional heating. The hydrodynamic diameters of poly(St-co-NIPAAm) particles were decreased as the temperature increased from 25 °C to 40 °C, and poly(St-co-NIPAAm) particles collapsed remarkably at 32 °C, which is the lower critical solution temperature of the poly(N-isopropylacrylamide). The morphology of the assembled poly(St-co–NIPAAm) particles was observed by SEM, it was found that monodisperse poly(St-co-NIPAAm) particles could assemble to form the two-dimensional order structures.     

Optimized buffered polymerizations to produce N-vinylcaprolactam-based microgels

Temperature-sensitive N-vinylcaprolactam (VCL)-based microgel particles were synthesized by emulsion polymerization in a batch reactor. To avoid the hydrolysis of VCL, optimized buffered reactions were carried out by using VCL as main monomer, N,N′-methylenebisacrylamide (BA) as cross-linker and a sugar-based comonomer (3-O-methacryloyl-1,2:5,6-di-O-isopropylidene-α-d-glucofuranose, 3-MDG). The amounts of initiator, cross-linker, surfactant, comonomer, and reaction temperature were the reaction variables. The effects of these variables on the kinetic features of the different polymerizations were analyzed. The colloidal characterization of the microgel particles consists of the analysis of the evolution of the average hydrodynamic diameters as a function of the temperature of the medium. The results showed that in all cases BA reacted faster than VCL. All final microgel particles showed swelling-de-swelling behavior by changing the temperature of the medium in which they are dispersed. Initially formed microgel particles were not temperature-sensitive being necessary up to about 30% of VCL conversion for the onset of the swelling-de-swelling behavior. The final colloidal characteristics of these new microgels can be tuned by modulating the reaction variables.     

Fabrication of Highly Spherical Millimeter‐Sized Poly(amic acid) Capsules by Removing Non‐Volatile Solvent

Millimeter‐sized highly spherical poly(amic acid) (PAA) capsules were prepared by curing an emulsion containing non‐volatile N,N‐dimethylacetamide (DMAc). Although the sphericity of the capsules (>99%) obtained by the emulsion method was slightly lower than that of corresponding polystyrene capsules, their surface was smooth. The curing conditions to achieve the highest degree of sphericity require stabilization and deformation, which were governed by parameters, such as PAA concentration, the viscosity of the emulsion matrix, stirring speed, and temperature.     

The kinetics of poly(N-isopropylacrylamide) microgel latex formation

Conversion versus time curves were measured for poly(N-isopropylacrylamide) microgel latexes prepared by polymerization in water with sodium dodecyl sulfate, SDS. Polymerization rates increased with temperature with methylenebisacrylamide crosslinking monomer consumed faster thanN-isopropylacrylamide. The particle diameter decreased with increasing concentrations of SDS in the polymerization recipe and there was evidence that the rate of polymerization increased somewhat with SDS concentration. Particle formation occurred by homogeneous nucleation as micelles were absent.Comparison of particle size distributions from dynamic light scattering to those from a centrifugal sizer led to the conclusion that larger particles within a specific latex were less swollen with acetonitrile than were the smaller ones. This was interpreted as evidence for the polymer in larger particles having a higher crosslink density. Particle swelling was estimated from swelling ratios defined as the particle volume at 25 °C divided by the volume at 50 °C. In the absence of crosslinking poly(N-isopropylacrylamide) linear chains would disolve at 25 °C. The swelling results indicated that the average crosslink density in the particles decreased with conversion. This was explained by the observation that the methylenebisacrylamide was consumed more quickly and is typical of crosslinking in emulsion polymerization where polymer particles have high polymer concentrations at their birth.     

Interaction of cellulose with amine oxide solvents

Cellulose I, mainly as ramie or as Avicel microcrystalline cellulose, has been monitored by optical microscopy and by ¹³C CPMAS NMR, over the course of its dissolution in hot N-methylmorpholine N-oxide solvent. Its interaction with the near-solvent N-ethylmorpholine N-oxide and related non-solvents has also been investigated. NMR shows that N-methylmorpholine N-oxide partly converts crystalline cellulose I into amorphous solid cellulose. The changes in chemical shift imply increased flexibility at the glycosidic bonds. In contrast, N-ethylmorpholine N-oxide converts cellulose I to cellulose III_I, without dissolution. Microscopy shows that the ramie fibres swell laterally, and at least some also shorten longitudinally, during dissolution. Model studies using methyl--d-glucopyranose show no evidence from ¹³C chemical shifts for different modes of binding with different solvents. However, N-methylmorpholine N-oxide binds more strongly to methyl--d-glucopyranose in DMSO than does N-ethylmorpholine N-oxide, whereas N-ethylmorpholine N-oxide binds better to H₂O. Also, ¹³C T ₁ values for aqueous cellobioside show increasing rotational freedom of the –CH₂OH sidechains as N-methylmorpholine N-oxide is added. Together, these observations imply the initial penetration of solvents and near-solvents between the molecular cellulose sheets. Subsequently, N-methylmorpholine N-oxide breaks H-bonds, particularly to O-6, just sufficiently to loosen individual chains and then dissolve the sheets.     

RAFT‐mediated batch emulsion polymerization of styrene using poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] trithiocarbonate as both surfactant and macro‐RAFT agent

Poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] trithiocarbonate, which contains the reactive trithiocarbonate group and the appending surface‐active groups, is used as both surfactant and macromolecular reversible addition‐fragmentation chain transfer (macro‐RAFT) agent in batch emulsion polymerization of styrene. Under the conditions at high monomer content of ～20 wt % and with the molecular weight of the macro‐RAFT agent ranging from 4.0 to 15.0 kg/mol, well‐controlled batch emulsion RAFT polymerization initiated by the hydrophilic 2‐2′‐azobis(2‐methylpropionamidine) dihydrochloride is achieved. The polymerization leads to formation of nano‐sized colloids of the poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride]‐b‐ polystyrene‐b‐poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] triblock copolymer. The colloids generally have core‐shell structure, in which the hydrophilic block forms the shell and the hydrophobic block forms the core. The molecular weight of the triblock copolymer linearly increases with increase in the monomer conversion, and the values are well‐consistent with the theoretical ones. The molecular weight polydispersity index of the triblock copolymer is below 1.2 at most cases of polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Ab initio Computational Modeling of Glyphosate Analogs: Conformational Perspective

A historical perspective on the application of conformational analysis to structure-based ligand design approach is presented. The application of isodensity molecular electrostatic potential surfaces with the conformational energy surfaces (CES) have allowed us to reach pertinent conclusions for aiding synthetic and biochemical studies. Here we illustrate such an application on the modeling of the potent analogs of an important, environmentally stringent herbicidal compound glyphosate by constructing conformational energy surfaces. The systems were modeled by substituting F, Cl, and NH— OH moiety to the position of pharmacophoric nitrogen center in glyphosate structure. All the calculations were thoroughly performed with ab initio MO theory at Hartree–Fock method using 3-21G(d) basis functions. On the basis of the results, we identified the bioactive conformations for N-fluoro-glyphosate, N-chloro-glyphosate, and N-hydroxyamino-glyphosate as (−38^∘, 77^∘), (−61^∘, 111^∘), and (−167^∘, −169^∘), respectively. Geometry optimization of certain selected conformations of these compounds using hybrid DFT method with 6–31+G(d) basis functions provides nearly equal values of φ and ψ. Moreover, the results indicate that the global minimum structures of N-fluoro and N-chloro analogs of glyphosate show cyclic conformation whereas the N-hydroxyamino-glyphosate global minimum structure shows spyrocyclic and zig-zag conformation. Also, the predicted bioactive conformation of N-hydroxyamino analog optimally overlaps with glyphosate backbone in EPSPS complex with 0.1 Å RMSD value. However, the other two compounds slightly deviate from the backbone of glyphosate with RMSD of 0.92 Å for N-fluoro-glyphosate and 0.83 Å for N-chloro-glyphosate. The linear N-hydroxyamino-glyphosate exhibits relatively more number of intermolecular hydrogen bond interactions as compared to the other two analogs. Further, comparison of CES of previously studied glyphosate analogs such as N-hydroxy-glyphosate (2.2 μM) and N-amino-glyphosate (0.61 μM) with the present systems reveals the order of activity as: N-hydroxyamino-glyphosate > N-fluoro-glyphosate > N-chloro-glyphosate based on CES flexibility. Also, the calculated heats of formation of N-fluoro-glyphosate, N-chloro-glyphosate, and N-hydroxyamino-glyphosate are −288, −209, and −288 kcal/mol, respectively, which clearly indicate that the N-hydroxyamino and N-fluoro analogs of glyphosate are thermodynamically more stable than N-amino-glyphosate (−278 kcal/mol).     

Hochdruckuntersuchungen zur Löslichkeit von Stickstoff in Wolfram

The paper reports investigations about the solubility of nitrogen in tungsten at nitrogen pressures up to 30 MPa (300 bar). The solubility of nitrogen obeysSieverts' law in the whole pressure range and can be represented by the equation logC _N=1/2 logp _{N 2}+4.0–9520/T (C _N in wt·ppm.p _{N 2} in bar,T in K).

     

Syntheses based on anabasine. Preparation and transformations of N-oxides

The oxidation of N-acetyl-and N-benzoylanabasine with the tert-butyl hydroperoxide (TBHP)— MoCl₅ system or MCPBA proceeds selectively at the nitrogen atom of the pyridine ring. The oxidation of N-methylanabasine under similar conditions gives a mixture of stereo-isomeric N-oxides at the piperidine nitrogen atom, their ratio depending on the reagent used. The oxidation of anabasine by TBHP— MoCl₅ or MCPBA is accompanied by dehydrogenation and results in anabaseine N-oxide. The reactions of anabasine and anabaseine pyridine N-oxides with acetic anhydride were investigated. The substituted 1H-3-pyridin-2-ones were prepared. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 322—328, February, 2006.     

Geminal systems. 50. Synthesis and alcoholysis of N-acyloxy-N-alkoxy derivatives of ureas,carbamates, and benzamides

Procedures were developed for the synthesis of N-acyloxy-N-alkoxy derivatives of ureas, carbamates, and benzamides by the reactions of the corresponding N-alkoxy-N-chloro derivatives with sodium carboxylates in MeCN. N-Chloro-N-ethoxy-p-toluenesulfonamide was inert in this reaction. Alcoholysis of N-acyloxy-N-alkoxy derivatives of ureas, carbamates, and tert-alkylamines afforded the corresponding N,N-dialkoxy derivatives, whereas alcoholysis of N-acetoxy-N-ethoxybenzamide gave rise to alkyl benzoates.     

Preparation of high molecular weight polyurethane particles by nonaqueous emulsion polyaddition

A versatile nonaqueous emulsion polyaddition process for the one-step fabrication of spherical polyurethane nanoparticles is presented. Three different emulsion systems were used consisting of N,N′-dimethylformamide (DMF) dispersed in n-hexane, acetonitrile dispersed in cyclohexane, and acetonitrile dispersed in tetradecane. After successful stabilization of the emulsion systems by using a poly(isoprene)-poly(methylmethacrylate) block copolymer, the fabrication of the polyurethanes was carried out within the dispersed polar phase. The polyurethane particles showed average diameters as small as 35 nm. Additionally, infrared (IR) characterization revealed that the formation of any urea, which decreases the mechanical properties of the polyurethanes, was prevented during the polyaddition. This was attributed to the anhydrous reaction conditions. Gel permeation chromatography (GPC) analysis demonstrated the average molecular weights (M _n) of the polyurethanes to be as high as 16,500 g/mol, corresponding to conversions of 0.98. Comparable molecular weights and conversions have not previously been achieved without the formation of urea.     

Si-Containing Amides of Phosphoric Acid

Summary. The first representative of the N-silylmethylamides of phosphoric acid O=P[NMe(CH₂SiMe _n (OEt)_3-n ]₃ have been synthesized by interaction of MeNHCH₂SiMe _n (OEt)_3-n (n = 2, 3) with POCl₃. The interaction of the N,N′,N″-trimethyl-N,N′,N″-tris[(ethoxydimethyl- silyl)methyl]triamide phosphoric acid with BF₃·Et₂O or BCl₃ results in the formation of the N,N′,N″-trimethyl-N,N′,N″-tris[(fluorodimethyl-silyl)methyl]triamide phosphoric acid or N,N′,N″-trimethyl-N,N′,N″-tris[(chlorodimethylsilyl)methyl]triamide phosphoric acid. NMR data show on the tetracoordinate state of silicon in these products. Professor Vadim Aleksandrovich Pestunovich, our chief, teacher and friend died on July 4^th, 2004     

正辛烷为稀释剂不对称N-甲基-N-辛基烷基酰胺萃取铀(Ⅵ)的研究(英)

The extraction of uranyl nitrate was studied with newly synthesized unsymmetrical alkylamides, Nmethyl-N-octyloctylamide (MOOA), N-methyl-N-octyldecanamide (MODA), and N-methyl-N-octyldodecanamide (MODOA), employing n-octane as diluent. The effect of the concentrations of nitric acid, sodium nitrate and extractants on the extraction was investigated and the extraction mechanism was suggested. The effect of temperature on the extraction was also studied and the related thermodynamic functions were calculated. The extracted species were characterized by FTIR spectrometry。     

An Efficient Method for the Synthesis of N-Acylsulfonamides: One-pot Sulfonylation and Acylation of Primary Arylamines under Solvent-Free Conditions

Summary. The preparation of N-acylsulfonamides is described using primary amines, arylsulfonyl chlorides and acyl chlorides. Reaction of primary aryl amines with arylsulfonyl chlorides in the presence of NaHCO₃ produced N-arylsulfonamides, which reacted in situ with benzoyl chloride furnishing the corresponding N-benzoyl-N-arylsulfonamides in 72–96% yields. Accordingly, 4-nitrobenzoyl chloride and 3,5-dinitrobenzoyl chloride were used as acylating agents. All the reactions were carried out under solvent-free conditions at room temperature and the products were isolated after simple work-up in high yields and purity.     

Quantum chemical study of the transformation of 2-(N-alkylamino)-3-(indol-1-yl)-and 2-(N-alkylamino)-3-(indol-3-yl)maleimides by protic acids: Tandem hydride transfer/cyclization mechanism

The geometric parameters, the charge distribution, and the energetics of N-methyl-2-(N-ethylanilino)-3-(indol-1-yl)-and N-methyl-2-(N-ethylanilino)-3-(indol-3-yl)maleimides and their conjugated acids were studied by density functional theory calculations at the B3LYP/6-31G(d) level. The mechanism of the tandem hydride transfer/cyclization sequence, which occurs after protonation of N-methyl-2-(N-ethylanilino)-3-(indol-1-yl)-and N-methyl-2-(N-ethylanilino)-3-(indol-3-yl)maleimides, was analyzed. The investigation of the potential energy surface for the tandem hydride transfer/cyclization of the iminium cation that formed upon protonation revealed that the hydride transfer followed by intramolecular cyclization at position 7 of the indole fragment in N-methyl-2-(N-ethylanilino)-3-(indol-1-yl)maleimide is the preferable process, unlike alternative intramolecular cyclization involving the cationic center at the C(2) atom of the indole fragment and the benzene ring of the N-ethylaniline fragment of the indoleninium cation in N-methyl-2-(N-ethylanilino)-3-(indol-3-yl)maleimide. A study of the key intermediates of the assumed reaction mechanism demonstrated that these intermediates are actually stationary points on the potential energy surface (minima and transition states). Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2069–2073, December, 2006.     

Synthesis of saccharidic polymer colloids via free radical mini‐emulsion polymerization

Polymer colloids based on 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG) and butyl acrylate (BA) were prepared via free radical mini‐emulsion polymerization. The kinetic and colloidal features of the copolymerization were investigated. The final particle size (D) of the sugar latexes is inversely proportional to the concentration of the anionic emulsifier (sodium dodecyl sulphate, SDS) and the non‐ionic one (alkyl polyglucoside, APG). It was also found that D is independent of the concentration of either the water‐soluble initiator (potassium persulfate, KPS), or the oil‐soluble initiator (2,2′‐azobisisobutyronitrile, AIBN). The rate of mini‐emulsion polymerization is lower in comparison with the conventional emulsion polymerization under the same conditions. The polymerization rate (R_p) and the total number of particles (N_p) are proportional to the 0.72th and 0.93th power of the SDS, and to the 1.40th and 2.22th of the APG concentration. Following reaction orders, 0.79/0.06 were obtained for R_p/N_p versus the concentration of KPS, and 0.22/?0.01 for AIBN, respectively. Copyright © 2004 John Wiley & Sons, Ltd.     

Umsetzung von Metall- und Metalloidverbindungen mit mehrfunktionellen Molekülen, 31. Mitteilung

The reaction of galliumtrichloride and galliumtribomide resp. with 2,6-dimethyl- and 2,4,6-trimethyl-N-trimethylsilyl-trifluoroacetanilide leads to the trifluoracetanilidodihalogenogallanes1–3. The 2,6,9-trioxa-4,8-diaza-1,5-digalla-bicyclo-[3.3.1]-nonadiene derivatives1 a–3 a are formed probably as by products.N-Trimethylsilyltrifluoroacetamide reacts with galliumtrichloride to yield the trifluoroacetamido-dichlorogallane4.N-Trimethylsilyl-N,N,N-triorganyl-thioureas react with galliumtrichloride under elimination of chlorotrimethylsilane to give the thio-ureido-gallanes5 and6. IfN,N-diorganylureas andN,N-diorganyl-thio-ureas resp. are reacted with galliumtrichloride and methyl-gallium-dichloride resp., the thio-ureido- and ureido-gallanes7–9 are obtained by elimination of hydrogenchloride. The compounds are characterized by analysis and spectral data (NMR:¹H,¹⁹F; MS; IR). The substances are monomeric in the gas phase, obviously due to internal coordination.

30. Mitt.:W. Maringgele undA. Meller, J. Organomet. Chem., im Druck.     

(N-methyl-N-alkoxymethylaminomethyl)dialkoxysilanes and bis[N-methyl-N-(dialkoxysilylmethyl)amino]methanes

(N-methyl-N-alkoxymethylaminomethyl)-dialkoxysilanes and bis[N-methyl-N-(dialkoxymethyl)amino]methanes were first obtained by the interaction of (N-methylaminomethyl) dialkoxy-R-silanes with chloromethyl alkyl ethers in yields of 40–67% and 10–25 %, respectively.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 382–383, February, 1995.     

In Situ Generated Janus Fabrics for the Rapid and Efficient Separation of Oil from Oil‐in‐Water Emulsions

A cotton fabric was coated with a polymer that contains both poly(dimethyl siloxane) (PDMS) and poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA). When the repeat unit number of PDMS is about three‐fold that of PDMAEMA and the fabric is exposed to air, the fabric is superhydrophobic because PDMS in the coating covers the PDMAEMA chains. Upon contact with an oil‐in‐water emulsion, the water‐soluble PDMAEMA rises to the top and the side in contact with the emulsion becomes hydrophilic. The emerged PDMAEMA chains then cause the emulsion droplets to coagulate, and the aggregated oil fills the pores on the superhydrophobic side of the fabric. The oil‐impregnated side remains hydrophobic even upon prolonged contact with water. Thus, a Janus fabric is elegantly generated in situ and sustained. This easy‐to‐prepare Janus fabric rapidly and efficiently separates oil from emulsions and may find practical applications.     

Synthesis ofN-(3-azido-2-nitroxypropyl)-,N-(2,3-diazidopropyl)-, andN-(2-azido-3-methoxypropyl)-N-alkylnitramines

N-(3-Azido-2-nitroxypropyl)-N-alkylnitramines andN-(2,3-diazidopropyl)-N-alkylnitramines were prepared by nitration and azidation ofN-alkyl-N-(2-hydroxy-3-chloropropyl)sulfamates andN-(3-azido-2-hydroxypropyl)-N-alkylsulfamates. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 206–208, January, 1999.