Phosphatidylserine/Cholesterol Bilayers Supported on a Polycation/Alkylthiol Layer Pair

1-Stearoyl-2-oleoyl phosphatidylserine (SOPS)/cholesterol bilayers, supported on a polycation/alkylthiol layer pair on a gold surface, were investigated by surface plasmon resonance (SPR) and fluorescence recovery after photobleaching. The substrate was formed by electrostatic adsorbance of a hydrated poly(diallyldimethylammonium chloride) (PDDA) layer on the negatively charged surface of a self-assembled monolayer of 11-mercaptoundecanoic acid (MUA) on gold. Lipid membranes with different SOPS/cholesterol compositions were deposited on the PDDA/MUA layer pair by vesicle fusion. When the cholesterol content was below 20%, single bilayers were deposited. Fluorescence recovery after the bleaching experiments revealed that the SOPS/cholesterol bilayers were mobile at room temperature; lateral diffusion coefficients of a fluorescence probe were approximately 1x10(-9) cm(2)/s. The kinetics of the addition of the ion-channel-forming peptide gramicidin to the supported bilayers was detected by SPR. Copyright 2000 Academic Press.     

Kinetic studies of glucose oxidase in polyelectrolyte multilayer films by means of scanning electrochemical microscopy (SECM)

Multilayer films of glucose oxidase (GOx) and poly(dimethyl diallyl ammonium chloride) (PDDA) prepared by layer-by-layer deposition were studied using scanning electrochemical microscopy (SECM). Aminated glass slides were coated with five bilayers of poly(styrene sulfonate) (PSS) and PDDA and used as substrates onto which GOx/PDDA multilayers were deposited. UV-Vis experiments confirmed multilayer growth, scanning force microscopic images provided morphological information about the films. SECM current-distance curves enabled the determination of kinetic information about GOx in GOx/PDDA multilayers as a function of layer number, film termination, inert covering layers, and enzyme substrate concentration after fitting to numerical models. The results indicate that only the topmost layers contributed significantly to the conversion. An odd-even pattern was observed for PDDA-terminated films or GOx-terminated films that correlated with morphological changes.     

静电层层自组装制备聚苯乙烯微球(核)/MCM-41纳米粒子(壳)阶层结构复合微粒

采用聚苯乙烯磺酸钠(PSS)和聚二烯丙基二甲基氯化铵(PDDA)两种聚电解质, 通过静电层层自组装成功地将MCM-41介孔二氧化硅纳米粒子包覆到聚苯乙烯(PS)微球表面. 实验结果表明, 当以尺寸为1.4 μm的PS微球为核时, 包覆了两个聚电解质双层(PDDA/PSS)2的PS(PDDA/PSS)2(PDDA/MCM-41)复合结构微粒与包覆了一个聚电解质双层(PDDA/PSS)的PS(PDDA/PSS)(PDDA/MCM-41)复合结构微粒相比, 复合结构微粒之间的交联程度降低, 但是MCM-41纳米粒子在聚苯乙烯微球表面的包覆都比较松散, 且产物中存在大量杂质. 而当以尺寸为5 μm的聚苯乙烯微球为核时, MCM-41纳米粒子紧密地包覆在聚苯乙烯微球表面, 复合结构微粒之间只有少量桥连物, 且产物中杂质很少.     

聚电解质PDDA/PSS层层自组装膜的渗透汽化性能

采用聚电解质层层自组装(LbL)技术, 在不同盐浓度下制备了聚(二烯丙基二甲基氯化铵)/聚苯乙烯磺酸钠(PDDA/PSS) 多层自组装膜, 并用于渗透汽化性能的研究. 重点考察了组装溶液中NaCl的浓度、组装层数及操作温度对自组装膜的异丙醇脱水性能的影响. 同时, 用扫描电镜观测了不同条件下制备膜的表面形貌. 结果表明, 在高NaCl含量的聚电解质溶液中只需组装几个双层的LbL膜, 即能获得较高的分离因子和较大的通量, 并解释了该LbL膜呈现反“trade-off”现象的原因.     

Fabrication of free-standing multilayer films by using pH-responsive microgels as sacrificial layers

A facile way to prepare free-standing polyelectrolyte multilayer films of poly(sodium 4-styrenesulfonate)(PSS)/poly(diallyldimethylammonium)(PDDA) was developed by applying a new pH-dependent sacrificial system based on cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) microgels. The tertiary amine groups of PDMAEMA microgels can be protonated in acidic environment, and the protonated microgels were deposited by layer-by-layer (LbL) technique with PSS. PSS/PDDA multilayer films were constructed on the top of the PSS/microgels sacrificial layers. The LbL assembly process was investigated by UV–vis spectroscopy. Further study shows that the free-standing PSS/PDDA multilayer films can be obtained within 3 min by treating the as-prepared films in alkali aqueous solution with a pH of 12.0. The pH-triggered exfoliation of PSS/PDDA multilayer films provides a simple and facile way to prepare LbL assembled free-standing multilayer films.     

Colloid stability of sodium dihexadecyl phosphate/poly(diallyldimethylammonium chloride) decorated latex

The colloid stability of supramolecular assemblies composed of the synthetic anionic lipid sodium dihexadecyl phosphate (DHP) on cationic poly(diallyldimethylammonium chloride) (PDDA) supported on polystyrene sulfate (PSS) microspheres was evaluated via turbidimetry kinetics, dynamic light scattering for particle sizing, zeta-potential analysis, and determination of DHP adsorption on PDDA-covered particles. At 0.05 g/L PDDA and 5 x 10(9) PSS particles/mL, PDDA did not induce significant particle flocculation and a vast majority of PDDA covered single particles were present in the dispersion so that this was the condition chosen for determining DHP concentration (C) effects on particle size and zeta-potentials. At 0.8 mM DHP, charge neutralization, maximal size, and visible precipitation indicated extensive flocculation and minimal colloid stability for the DHP/PDDA/PSS assembly. At 0.05 g L(-1) PDDA, isotherms of high affinity for DHP adsorption on PDDA-covered particles presented a plateau at a limiting adsorption of 135 x 10(19) DHP molecules adsorbed per square meter PSS which was well above bilayer deposition on a smooth particle surface. The polyelectrolyte layer on hydrophobic particles was swelled and fluffy yielding ca. 6 +/- 1.5 nm hydrodynamic thickness. Maximal and massive adsorption of DHP lipid onto this layer produced polydisperse DHP/PDDA/PSS colloidal particles with low colloid stability and which, at best, remained aggregated as doublets over a range of large lipid concentrations so that it was not possible to evaluate the mean total thickness for the deposited film. The assembly anionic lipid/cationic PDDA layer/polymeric particle was relatively stable as particle doublets only well above charge neutralization of the polyelectrolyte by the anionic lipid, at relatively large lipid concentrations (above 1 mM DHP) with charge neutralization leading to extensive particle aggregation.     

Construction of glucose biosensor based on sorption of glucose oxidase onto multilayers of polyelectrolyte/nanoparticles

A new approach to constructing an enzyme-containing film on the surface of a gold electrode for use as a biosensor is described. A basic multilayer film (BMF) of (PDDA/GNPs) _n /PDDA was first constructed on the gold electrode by electrostatic layer-by-layer self-assembly of poly(diallyldimethylammonium chloride) (PDDA) and gold nanoparticles (GNPs). Glucose oxidase (GOx) was then sorbed into this BMF by dipping the BMF-modified electrode into a GOx solution. The assembly of the BMF was monitored and tested via UV-vis spectroscopy and cyclic voltammetry (CV). The ferrocenemethanol-mediated cyclic voltammograms obtained from the gold electrode modified with the (PDDA/GNPs) _n /PDDA/GOx indicated that the assembled GOx remained electrocatalytically active for the oxidation of glucose. Analysis of the voltammetric signals showed that the surface coverage of active enzyme was a linear function of the number of PDDA/GNPs bilayers. This result confirmed the penetration of GOx into the BMF and suggests that the BMF-based enzyme film forms in a uniform manner. Electrochemical impedance measurements revealed that the biosensor had a lower electron transfer resistance (R _et) than that of a sensor prepared by layer-by-layer assembly of PDDA and GOx, due to the presence of gold nanoparticles. The sensitivity of the biosensor for the determination of glucose, which could be controlled by adjusting the number of PDDA/GNPs bilayers, was investigated.     

Assembly of Electroactive Ordered Multilayer Films of Cobalt Phthalocyanine Tetrasulfonate and Polycations

Films with alternating layers of the anion cobalt phthalocyanine tetrasulfonate (CoIIPcTS4-) and cationic polydimethyldiallylammonium chloride (PDDA) were prepared by electrostatic layer-by-layer adsorption. Quartz crystal microbalance and optical studies demonstrated formation of smooth ultrathin films with a linear increase in thickness with the number of deposition steps. Films containing 1, 2, 3, 4, and 5 bilayers of CoIIPcTS4-/PDDA on a gold electrode gave reversible, reproducible steady state cyclic voltammetry for the CoII/CoI redox couple with midpoint potential at -0.28 V vs a saturated calomel reference electrode. Voltammetry was controlled predominantly by charge transport processes in the film, even for films containing only a bilayer of PDDA/CoIIPcTS4-. The peak reduction current increased with the number of layers and showed a tendency to saturation after a deposition of 4-5 bilayers. Copyright 1999 Academic Press.     

Inhibiting surface crystallization of amorphous indomethacin by nanocoating

An amorphous solid (glass) may crystallize faster at the surface than through the bulk, making surface crystallization a mechanism of failure for amorphous pharmaceuticals and other materials. An ultrathin coating of gold or polyelectrolytes inhibited the surface crystallization of amorphous indomethacin (IMC), an anti-inflammatory drug and model organic glass. The gold coating (10 nm) was deposited by sputtering, and the polyelectrolyte coating (3-20 nm) was deposited by an electrostatic layer-by-layer assembly of cationic poly(dimethyldiallyl ammonium chloride) (PDDA) and anionic sodium poly(styrenesulfonate) (PSS) in aqueous solution. The coating also inhibited the growth of existing crystals. The inhibition was strong even with one layer of PDDA. The polyelectrolyte coating still permitted fast dissolution of amorphous IMC and improved its wetting and flow. The finding supports the view that the surface crystallization of amorphous IMC is enabled by the mobility of a thin layer of surface molecules, and this mobility can be suppressed by a coating of only a few nanometers. This technique may be used to stabilize amorphous drugs prone to surface crystallization, with the aqueous coating process especially suitable for drugs of low aqueous solubility.     

In situ fabrication of silver nanoarrays in hyaluronan/PDDA layer-by-layer assembled structure

We present a simple in situ method to fabricate silver (Ag) nanoparticle arrays in a layer-by-layer (LBL) assembled hyaluronan (HA)/poly(dimethyldiallylammonium chloride) (PDDA) multilayer structure, in which the LBL multilayered film is constructed by electrostatic attraction between positively charged PDDA and negatively charged HA, followed by in situ synthesis of embedded Ag nanoparticle arrays in the LBL "nanoreactors," where the abundant negatively charged carboxyl groups of HA bind and further reduce Ag(+) ions under UV-irradiating. The arrays morphology is highly dependent on the number of bilayers, and the surface density of nanoparticles in the arrays can be simply tailored by the number of irradiation/drying cycles during fabrication. The embedded Ag nanoparticle arrays possess good stability for localized surface plasmon resonance (SPR) absorption spectrum-based biosensors and superior antimicrobial capability. These render great potentials for the films in both biosensing and antimicrobial applications.     

Identification of Skim Milk Electroacidification Fouling: A Microscopic Approach

The self-assembly film fabricated via the layer-by-layer technique was studied by the dynamic contact angle (DCA) method (wilhelmy plate method). The used polyelectrolytes are poly(diallyl-dimethylammonium chloride) (PDDA), poly(etheleneimine) (PEI), diphenylamine-4-diazonium-formaldehyde resin (DR), 2-nitro-N-methyl-4-diazonium-formaldehyde resin (NDR), and poly(sodium-p-styrenesulfonate) (PSS). For the self-assembly systems of PDDA/PSS, PEI/PSS, DR/PSS, and NDR/PSS, their individual contact angle fluctuates regularly with the fabrication of each layer, while the magnitude of different systems' contact angle depends on the participant polycation. The re-organization of components and the adjacent layer interpenetration are presented here to explain this phenomena. We also found that DR or NDR can adsorb itself via the layer-by-layer method to form multilayer film, and the hydrophobic interaction is put forward to effect this process. Moreover, the procedure of washing and drying after adsorption was studied and considered as a prerequisite for the successful fabrication, especially of the same charge carried components. Copyright 2001 Academic Press.     

Protein adsorption on supported phospholipid bilayers

Quartz crystal microbalance with dissipation (QCM-D) measurements were used to investigate the adsorption of human fibrinogen, human serum albumin, bovine hemoglobin, horse heart cytochrome c, human immunoglobulin (hIgG), and 10% fetal bovine serum on supported bilayers of egg-phosphatidylcholine (eggPC) lipids. For comparison the adsorption of fibrinogen and hIgG to eggPC bilayers was also studied with surface plasmon resonance (SPR). The supported bilayers were formed in situ by vesicle adhesion and spontaneous fusion onto a SiO(2) surface. The supported lipid bilayer is highly protein resistant: The irreversible adsorption measured with the QCM-D technique was below the detection level, while reversible protein adsorption was detected for all the proteins in the range 0.3-4% of the saturation coverage on a hydrophobic thiol monolayer on gold. The adsorbed amounts were slightly higher for the SPR measurements. Possible mechanisms for the protein resistance of eggPC bilayers are briefly discussed.     

Activity and lifetime of urease immobilized using layer-by-layer nano self-assembly on silicon microchannels

Urease has been immobilized and layered onto the walls of manufactured silicon microchannels. Enzyme immobilization was performed using layer-by-layer nano self-assembly. Alternating layers of oppositely charged polyelectrolytes, with enzyme layers “encased” between them, were deposited onto the walls of the silicon microchannels. The polycations used were polyethylenimine (PEI), polydiallyldimethylammonium (PDDA), and polyallylamine (PAH). The polyanions used were polystyrenesulfonate (PSS) and polyvinylsulfate (PVS). The activity of the immobilized enzyme was tested by pumping a 1 g/L urea solution through the microchannels at various flow rates. Effluent concentration was measured using an ultraviolet/visible spectrometer by monitoring the absorbance of a pH sensitive dye. The architecture of PEI/PSS/PEI/urease/PEI with single and multiple layers of enzyme demonstrated superior performance over the PDDA and PAH architectures. The precursor layer of PEI/PSS demonstrably improved the performance of the reactor. Conversion rates of 70% were achieved at a residence time of 26 s, on d 1 of operation, and >50% at 51 s, on d 15 with a six-layer PEI/urease architecture.     

Double-layered TiO2-SiO2 nanostructured films with self-cleaning and antireflective properties

Dual function of self-cleaning and antireflection can be created in double-layered TiO2-SiO2 nanostructured films. The film were prepared by (1) layer-by-layer deposition of multilayered SiO2 nanoparticles with polydiallyldimethylammonium (PDDA) cations, (2) layer-by-layer deposition of multilayered titanate nanosheets with polications on PDDA/SiO2 multilayer films, and (3) burning out the polymer and converting titanate nanosheets into TiO2 by hearing at 500 degrees C. The as-prepared films, consisting of a porous SiO2 bottom layer and a dense TiO2 top layer, improved the transmittance of glass or quartz substrates, as demonstrated by transmission spectra collected at normal incidence. The photocatalytic properties of the films were studied by the change of the water contact angle together with the decay of the IR absorption of the hydrocarbon chain of octadecylphosphonic-acid-modified films under 2.6 mW cm-2 UV illumination. Both the antireflective and the photocatalytic properties of the films were dependent on the number of PDDA/nanosheet bilayers deposited. however, excellent surface wettability of the films for water was obtained, independent of the preparation conditions. The experimental findings are discussed in terms of the special structure of the double-layered nanostructured film.     

聚电解质PSS/PDDA分子沉积膜表面性能研究

PSS PDDAMD膜紫外 可见吸光度与层数呈线性关系 ,其延长线基本为零证实了是一单分子层层状沉积过程 ;利用接触角测量仪跟踪MD膜沉积过程 ,其结果表明 ,层数较少时PSS PDDAMD膜表面润湿性呈“奇 偶”性规律变化 ,层数较多时规律性不明显 ,这说明聚电解质MD膜结构缺陷随着层数的增加有增大趋势 ;通过对原子力显微镜 (AFM)测定结果的分析 ,进一步证实了多层PSS PDDAMD膜存在结构缺陷 .     

自组装超薄膜修饰Ta2O5介质膜及其特性研究

采用静电自组装方法在五氧化二钽(Ta2O5)介质氧化膜上制备了聚二烯丙基二甲基氯化铵(PDDA)/聚苯乙烯磺酸钠(PSS)和聚二烯丙基二甲基氯化铵/聚-3,4-乙烯二氧噻吩-聚苯乙烯磺酸钠(PEDOT-PSS)超薄膜.研究了两种自组装超薄膜在Ta2O5介质氧化薄膜上的组装特性.结果表明两种自组装膜能够稳定地组装于Ta2O5介质膜表面,并有效降低薄膜的表面粗糙度.进一步研究了两种自组装超薄膜修饰的Ta2O5电容结构的电性能.结果表明静电自组装膜对Ta2O5介质膜表面进行修饰后,有效地隔离了介质氧化膜中的缺陷,降低了电容的漏电流并提高耐电压能力;研究还发现不同厚度的超薄膜对Ta2O5电容结构的耐压特性有不同程度的影响,较厚的薄膜可以更好地提高电容的耐压能力并降低漏电流,但会增加电容的等效串联电阻(ESR).另外,在相同薄膜层数的情况下,聚合物电解质PEDOT-PSS良好的导电性能降低了复合超薄膜的电阻,使得PDDA/PEDOT-PSS修饰的电容结构ESR值较低.     

Comparative bioelectrochemical study of core-shell nanocluster films with ordinary layer-by-layer films containing heme proteins and CaCO3 nanoparticles

Negatively charged heme protein hemoglobin (Hb) or myoglobin (Mb) at pH 9.0 and positively charged poly(diallyldimethylammonium) (PDDA) were alternately adsorbed on the surface of CaCO(3) nanoparticles, forming core-shell CaCO(3)-[PDDA/(protein/PDDA)(m)] ([protein-m]) nanoclusters. Oppositely charged [protein-m] and poly(styrenesulfonate) (PSS) were then assembled layer by layer on various solid substrates, forming {[protein-m]/PSS}(n) films. In the meantime, ordinary layer-by-layer films of heme proteins with CaCO(3) nanoparticles ({protein/CaCO(3)}(n)) were also grown on solid surfaces. Transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) spectroscopy, quartz crystal microbalance (QCM), and cyclic voltammetry (CV) were used to characterize the nanoclusters and monitor the growth of the two types of films. Both kinds of protein films assembled on pyrolytic graphite (PG) electrodes exhibited well-defined, nearly reversible CV reduction-oxidation peaks, characteristic of heme Fe(III)/Fe(II) redox couples, and were used to catalyze the electrochemical reduction of hydrogen peroxide. The {[protein-m]/PSS}(n) films demonstrate distinct advantages over the {protein/CaCO(3)}(n) films due to their larger fraction of electroactive proteins, higher catalytic efficiency, and better thermostability. The penetration experiments of the electroactive probe into these films indicate that the {[protein-m]/PSS}(n) nanocluster films possess more pores or channels than the simple {protein/CaCO(3)}(n) films, which may be beneficial to counterion transport in the charge-hopping mechanism and helpful for the diffusion of catalysis substrates into the films. In addition, the electrochemical and biocatalytic activity of protein nanocluster films can be tailored by controlling the number of bilayers assembled on the nanoparticle cores (m) as well as the film thickness or the number of nanocluster layers on the electrodes (n).     

Single Lipid Bilayers Constructed on Polymer Cushion Studied by Sum Frequency Generation Vibrational Spectroscopy

Planar solid supported single lipid bilayers on mica, glass, or other inorganic surfaces have been widely used as models for cell membranes. To more closely mimic the cell membrane environment, soft hydrophilic polymer cushions were introduced between the hard inorganic substrate and the lipid bilayer to completely avoid the possible substrate-lipid interactions. In this article, sum frequency generation (SFG) vibrational spectroscopy was used to examine and compare single lipid bilayers assembled on the CaF(2) prism surface and on poly (L-lactic acid) (PLLA) cushion. By using asymmetric lipid bilayers composed of a hydrogenated 1,2-dipalmitoyl-sn-glycerol-3-phosphoglycerol (DPPG) leaflet and a deuterated 1,2-dipalmitoyl-(d62)-sn-glycerol-3-phosphoglycerol (d-DPPG) leaflet, it was shown that the DPPG lipid bilayers deposited on the CaF(2) and PLLA surfaces have similar structures. SFG has also been applied to investigate molecular interactions between an antimicrobial peptide Cecropin P(1) (CP1) and the lipid bilayers on the above two different surfaces. Similar results were again obtained. This research demonstrated that the hydrophilic PLLA cushion can serve as an excellent substrate to support single lipid bilayers. We believe that it can be an important cell membrane model for future studies on transmembrane proteins, for which the possible inorganic substrate-bilayer interactions may affect the protein structure or function.     

New characterization of layer-by-layer self-assembly deposition of polyelectrolytes on cotton fabric

Layer-by-layer self-assembly deposition of polyelectrolytes on textile materials might provide a new approach to endue different functions to textiles. Two simple characterization methods for electrostatic self-assembly deposition of two typical polyelectrolytes, poly(sodium 4-styrenesulfonate) (PSS) and poly(diallyldimethylammonium chloride) (PDDA) on cotton fabrics were investigated in this paper. Dyeing of the PSS/PDDA assembled cotton fabrics with anionic Direct Red 80 and cationic Methylene Blue shows regular and observable “odd–even” oscillations in terms of color depth (K/S value), which could be utilized for the assessment of the variation of surface electric property of the cotton substrate due to the alternate fabrication of PSS and PDDA on it. A linear increase in UV absorbance at 226 and 261 nm of treated cotton fabrics further revealed that the growth of these layer-by-layer multilayers could be recorded by monitoring UV spectra of assembled cotton specimens. ATR FT-IR spectra did not show any identifiable differences between cotton substrates with and without deposition of PSS/PDDA multilayers.     

Microstructuring of phospholipid bilayers on gold surfaces by micromolding in capillaries

Microstructuring of lipid bilayers on gold surfaces was achieved by micromolding in capillaries employing chemically modified polydimethylsiloxane (PDMS). Microfluidic networks of PDMS were prepared by micromolding and functionalized with thiol end-groups using 3-mercaptopropyltrimethoxysilane. The PDMS stamps were firmly attached to the gold substrate via quasi-covalent linkage providing a tight seal, a prerequisite for establishing individual addressable capillaries. Bilayers composed of POPC/POPG were subsequently prepared on microstructured self assembly monolayers of 11-amino-1-undecanethiol via strong electrostatic interactions. This way it is possible to generate individually addressable lipid bilayers on gold surfaces, a procedure, which is of widespread interest for investigating protein lipid interactions with microscopic techniques.