Silica-coated quantum dots for optical evaluation of perfluorocarbon droplet interactions with cells

There has been recent interest in developing new, targeted, perfluorocarbon (PFC) droplet-based contrast agents for medical imaging (e.g., magnetic resonance imaging, X-ray/computed tomography, and ultrasound imaging). However, due to the large number of potential PFCs and droplet stabilization strategies available, it is challenging to determine in advance the PFC droplet formulation that will result in the optimal in vivo behavior and imaging performance required for clinical success. We propose that the integration of fluorescent quantum dots (QDs) into new PFC droplet agents can help to rapidly screen new PFC-based candidate agents for biological compatibility early in their development. QD labels can allow the interaction of PFC droplets with single cells to be assessed at high sensitivity and resolution using optical methods in vitro, complementing the deeper depth penetration but lower resolution provided by PFC droplet imaging using in vivo medical imaging systems. In this work, we introduce a simple and robust method to miscibilize silica-coated nanoparticles into hydrophobic and lipophobic PFCs through fluorination of the silica surface via a hydrolysis-condensation reaction with 1H,1H,2H,2H-perfluorodecyltriethoxysilane. Using CdSe/ZnS core/shell QDs, we show that nanoscale, QD-labeled PFC droplets can be easily formed, with similar sizes and surface charges as unlabeled PFC droplets. The QD label can be used to determine the PFC droplet uptake into cells in vitro by fluorescence microscopy and flow cytometry, and can be used to validate the fate of PFC droplets in vivo in small animals via fluorescence microscopy of histological tissue sections. This is demonstrated in macrophage and cancer cells, and in rabbits, respectively. This work reveals the potential of using QD labels for rapid, preclinical, optical assessment of different PFC droplet formulations for their future use in patients.     

The Application of CdSe Quantum Dots with Multicolor Emission as Fluorescent Probes for Cell Labeling

Herein, highly luminescent CdSe quantum dots (QDs) with emissions from the blue to the red region of visible light were synthesized by using a simple method. The emission range of the CdSe QDs could be tuned from λ=503 to 606 nm by controlling the size of the CdSe QDs. Two amino acids, L ‐tryptophan (L ‐Trp) and L ‐arginine (L ‐Arg), were used as coating agents. The quantum yield (QY) of CdSe QDs (green color) with an optimized thickness could reach up to 52 %. The structures and compositions of QDs were examined by using X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Optical properties were studied by using UV/Vis and photoluminescence (PL) spectroscopy and a comparison was made between uncoated and coated CdSe QDs. The amino acid‐modified β‐cyclodextrin (CD)‐coated CdSe QDs presented lower cytotoxicity to cells for 48 h. Furthermore, amino acid‐modified β‐CD‐coated green CdSe QDs in HepG2 cells were assessed by using confocal laser scanning fluorescence microscopy. The results showed that amino acid‐modified β‐CD‐coated green CdSe QDs could enter tumor cells efficiently and indicated that biomolecule‐coated QDs could be used as a potential fluorescent probe.     

In vivo NIR imaging with CdTe/CdSe quantum dots entrapped in PLGA nanospheres

Luminescent near-infrared (NIR) CdTe/CdSe QDs were synthesized and encapsulated in poly(lactic-co-glycolic acid) (PLGA) nanospheres to prepare stable and biocompatible QDs-loaded nanospheres for in vivo imaging. QDs were encapsulated with PLGA nanospheres by a solid dispersion method and optimized to have high fluorescence intensity for in vivo imaging detection. The resultant QDs-loaded PLGA nanospheres were characterized by various analytical techniques such as UV-Vis measurement, dynamic light scattering (DLS), fluorescence spectroscopy, and transmission electron microscopy (TEM). Finally, we evaluated toxicity and body distribution of QDs loaded in PLGA nanospheres in vitro and in vivo, respectively. From the results, the QDs loaded in PLGA nanospheres were spherical and showed a diameter range of 135.0-162.3 nm in size. The QD nanospheres increased their stability against photooxidation and photobleaching, which have the high potential for applications in biomedical imaging. We have also attained non-invasive in vivo imaging with light photons, representing an intriguing avenue for obtaining biological information by the use of NIR light.     

Probing cytotoxicity of CdSe and CdSe/CdS quantum dots

Toxicities of CdSe and CdSe/CdS quantum dots(QDs) synthesized by ultrasound-assisted methods were investigated in vitro and in vivo.Five human cell lines were used to assess the cytotoxicity of as-prepared CdSe and CdSe/CdS by assays of MTT viability,red blood cell hemolysis,flow cytometry,and fluorescence imaging.The results show that these QDs may be cytotoxic by their influence in S and G2 phases in cell cycles.The cytotoxicity of QDs depends on both the physicochemical properties and related to target cells.     

CdX(X=Se,Te,Te/ZnS)量子点脂质体的制备及毒性比较

在水相中以巯基乙酸(mercaptoacetic acid, MA)为稳定剂合成了CdSe、CdTe、CdTe/ZnS量子点及谷胱甘肽(glutathione, GSH)为稳定剂合成了CdTe量子点,然后通过卵磷脂和胆固醇修饰制得相应的量子点脂质体。溶血实验证实GSH修饰量子点的溶血率低于MA修饰的量子点45%;脂质体修饰后,量子点的溶血率＜5%,达到生物医用材料要求。不同表面修饰的量子点对小鼠毒性存在明显差异,荧光显微镜观察组织切片证实量子点在小鼠体内主要分布在肺、肾、胸腺等组织中,而脂质体量子点在脑组     

Imaging pancreatic cancer using surface-functionalized quantum dots

In this study, CdSe/CdS/ZnS quantum dots (QDs) were used as optical contrast agent for imaging pancreatic cancer cells in vitro using transferrin and anti-Claudin-4 as targeting ligands. CdSe/CdS/ZnS was chosen because the CdSe/CdS/ZnS QDs have better photoluminescence (PL) efficiency and stability than those of CdSe/ZnS. The transferrin-mediated targeting is demonstrated in both a cell-free coprecipitation assay as well as using in vitro confocal microscopy. Pancreatic cancer specific uptake is also demonstrated using the monoclonal antibody anti-Claudin-4. This targeted QD platform will be further modified for the purpose of developing as an early detection imaging tool for pancreatic cancer.     

3-巯基丙酸修饰的CdSe/ZnS量子点的合成及测定牛血清白蛋白的研究

以3-巯基丙酸作为修饰剂,在水溶液中合成了稳定的CdSe/ZnS量子点(QDs),透射电镜观察所合成量子点的形貌近似球形,粒径约为25 nm.吸收光谱与荧光光谱的研究表明,CdSe QDs在410 nm处有最大吸收峰,而CdSe/ZnS QDs的最大吸收峰在470 nm处,CdSe/ZnS QDs的荧光强度是CdSe QDs的11倍.考察了缓冲溶液的体积、pH值、反应温度、反应时间对体系荧光的影响.在最佳实验条件下,体系的荧光强度与BSA的浓度呈线性关系,线性响应范围为0.746×10-7～4.48×10-7 mol/L,检出限为3.846×10-10 mol/L.并且CdSe/ZnS QDs荧光强度基本保持稳定,可达两个多月.该方法应用于合成样品的测定,结果满意.     

Bovine serum albumin-directed synthesis of biocompatible CdSe quantum dots and bacteria labeling

A simple method was developed for preparing CdSe quantum dots (QDs) using a common protein (bovine serum albumin (BSA)) to sequester QD precursors (Cd(2+)) in situ. Fluorescence (FL) and absorption spectra showed that the chelating time between BSA and Cd(2+), the molar ratio of BSA/Cd(2+), temperature, and pH are the crucial factors for the quality of QDs. The average QD particle size was estimated to be about 5 nm, determined by high-resolution transmission electron microscopy. With FL spectra, Fourier transform infrared spectra, and thermogravimetric analysis, an interesting mechanism was discussed for the formation of the BSA-CdSe QDs. The results indicate that there might be conjugated bonds between CdSe QDs and -OH, -NH, and -SH groups in BSA. In addition, fluorescence imaging suggests that the QDs we designed can successfully label Escherichia coli cells, which gives us a great opportunity to develop biocompatible tools to label bacteria cells.     

氨基化单分散量子点/二氧化硅核壳纳米粒子的制备及其细胞标记

通过反向微乳液法, 在油溶性量子点表面包裹二氧化硅外壳, 使油溶性量子点水溶性化, 再利用3-氨丙基三乙氧基硅烷(APTES)在已形成的二氧化硅纳米颗粒表面进行氨基化改性, 制备富含氨基的二氧化硅包裹的量子点荧光纳米球. 通过透射电子显微镜(TEM)、粒径分析、zeta电位检测、紫外-可见分光光度、荧光分光光度和红外光谱等手段对产品进行了表征. 结果表明, 所制备的二氧化硅量子点纳米球(45 nm)具有单分散性、水溶性好及光化学稳定性强等优点. 通过静电作用, 所制备的单分散氨基化二氧化硅量子点对肿瘤细胞表面膜电荷进行了初步标记显像.     

SUBCELLULAR LOCALIZATION OF HEMATOPORPHYRIN DERIVATIVE IN BLADDER TUMOR CELLS IN CULTURE

Mitochondria have been implicated as a primary subcellular site of porphyrin localization and photodestruction. However, other organelles including the cell membrane, lysosomes and nucleus have been shown to be damaged by hematoporphyrin derivative (HpD) photosensitized destruction as well. In this study we attempted to follow the translocation of the fluorescent components of HpD in human bladder tumor cells (MGH-U1) in culture to determine whether specific subcellular localization occurs over time. Following a 30 min exposure to HpD the cellular fluorescence was examined immediately and 1, 2, 4, and 24 h after HpD removal using fluorescence microscopy and an interactive laser cytometer. The in vitro translocation of dye appeared to be fairly rapid with fluorescence present at the cell membrane and later (1-2 h) within a perinuclear area of the cytoplasm. To determine whether HpD had become concentrated into a specific subcellular organelle, these fluorescence distribution patterns were compared with fluorescent marker dyes specific for mitochondria, endoplasmic reticulum and other membranous organelles. The HpD fluorescence did not appear to be as discrete as the dyes specific for mitochondria or endoplasmic reticulum but appeared similar to the diffuse cytomembrane stain. Finally, the interaction between the fluorescent components of HpD and the cellular constituents was evaluated using a "fluorescence redistribution after photobleaching" technique. The results indicated that the mean lateral diffusion for HpD in MGH-U1 cells was 1.05 x 10(-8) cm2/s, a rate closer to that of lipid diffusion (10(-8)) than that of protein diffusion (10(-10)).(ABSTRACT TRUNCATED AT 250 WORDS)     

高质量CdSe量子点的水相制备与表征

以巯基丁二酸为稳定剂, 亚硒酸钠为硒源, 制备了高质量水溶性CdSe量子点. 研究了反应时间、 镉与硒的摩尔比及镉与巯基丁二酸的摩尔比等实验条件对CdSe量子点光谱性能的影响. 分别用紫外-可见光谱、 荧光光谱、 X射线粉末衍射和透射电子显微镜等对量子点进行表征. 结果表明, 采用这种方法制得的CdSe量子点为立方晶型, 量子点的荧光发射峰在518～562 nm范围内连续可调, 并且发射峰的半峰宽始终保持在35 nm左右, 荧光量子产率可达21%.     

Synthesis of CdSe quantum dots using selenium dioxide as selenium source and its interaction with pepsin

A novel method has been developed for the synthesis of thioglycolic acid (TGA)-capped CdSe quantum dots (QDs) in an aqueous medium when selenium dioxide worked as a selenium source and sodium borohydride acted as a reductant. The interaction between CdSe QDs and pepsin was investigated by fluorescence spectroscopy. It was proved that the fluorescence quenching of pepsin by CdSe QDs was mainly a result of the formation of CdSe-pepsin complex. Based on the fluorescence quenching results, the Stern-Volmer quenching constant (Ksv), binding constant (KA) and binding sites (n) were calculated. According to the Foster's non-radiative energy transfer theory, the binding distance (r) between pepsin and CdSe QDs was obtained. The influence of CdSe QDs on the conformation of pepsin has been analyzed by synchronous fluorescence spectra, which provided that the secondary structure of pepsin has been changed by the interaction of CdSe QDs with pepsin.     

CdSe包覆层数对水溶性CdTe/CdSe (II型)核壳量子点的光学特性和微观结构的影响

在水相合成的CdTe量子点的体系中通过分批次加入新鲜配制的NaHSe和CdCl2溶液,制备出了CdSe包覆层数不同的CdTe/CdSe核壳量子点,并着重考察了CdSe包覆层数对CdTe/CdSe核壳量子点的光学特性以及微观结构的影响.与CdTe量子点相比,CdSe单层包覆的CdTe/CdSe核壳量子点的吸收峰和荧光发射峰出现明显红移;随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点吸收光谱的覆盖范围向长波方向扩展,荧光发射峰强度逐步下降,荧光寿命大幅延长,体现出Ⅱ型核壳量子点的特征.X射线衍射(XRD)分析表明,随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点的粉末衍射峰由CdTe衍射峰位置逐步向CdSe衍射峰位置靠近.CdTe/CdSe核壳量子点因其延伸到近红外区域的宽吸收特性致使其在太阳电池领域具有重要的应用前景.     

CdTe/CdSe核壳量子点的合成及其在指纹显现中的应用

以CdCl2和Te粉为原料,在水相中合成了CdTe量子点核;通过外延生长在CdTe量子点核上包覆一层CdSe量子点,得到具有良好荧光性能的CdTe/CdSe核壳量子点;采用X射线衍射仪、透射电镜、高分辨透射电镜分析了不同反应条件下合成的CdTe/CdSe核壳量子点的晶体结构和微观结构,并对其进行了荧光光谱等测试和指纹显现分析.结果表明,合成的CdTe和CdTe/CdSe量子点粒径在3～5nm之间,粒径分布窄,水分散性良好;可以通过控制反应时间和Te/Se比等得到在500～700nm显示荧光发射峰的CdTe/CdSe核壳量子点.此外,核壳CdTe/CdSe量子点可以有效地和指纹物质结合,可应用于对铝合金油潜指纹的鉴别.     

Efficient assembly of multi-walled carbon nanotube-CdSe/ZnS quantum dot hybrids with high biocompatibility and fluorescence property

CdSe/ZnS core-shell quantum dots (QDs) were efficiently tethered onto polyamidoamine dendrimer-modified multi-walled carbon nanotubes (MWCNTs) by covalent linkage and mercapto-mediated assembly. The obtained MWCNT-QD hybrids were both photophysically and morphologically characterized. The QDs are well-distributed on single nanotube surface in high density and the assembly of QDs onto MWCNTs does not change the fluorescence emission wavelength of QDs but significantly decreases the emission density. Cytotoxicity of MWCNT-QD hybrids to HeLa cells and their fluorescence property in living cell system were evaluated in detail. The hybrids show a little effect on cell viability even at very high concentration (100 μg mL(-1)). Moreover, they possess intense red fluorescence signal under optical fluorescence microscopy and good fluorescence stability over 72-h exposure in living cell system.     

Synthesis of stable luminescent microspheres by a simple method

An easy procedure for preparing microspheres containing CdSe/CdS core-shell quantum dots (QDs) was demonstrated. The luminescent properties of this microsphere were characterized by fluorescence microscopy and fluorescence spectrophotometry. Scanning electron microscopy was also used in this study. Laser confocal microscopy was carried out to describe the distribution of QDs in the microsphere. Especially, the stability of microspheres was investigated. It was found that the getting microsphere was very stable in water and showed values for physiological conditions. The inherent stability of the spheres, as well as their photostability, allows them to be used in biological applications.     

Ultrafine biocompatible chitosan nanoparticles encapsulating multi-coloured quantum dots for bioapplications

Owing to their excellent optical properties, luminescent semi-conductor quantum dots (QDs) have proven themselves to be an attractive choice in biological labeling. However, there exists the concern of cytotoxicity in using these heavy metal-based nanoparticles as molecular probes. In order to improve their general biocompatibility, CdSe/ZnS QDS are encapsulated in the natural biopolymer chitosan, forming monodisperse chitosan nanoparticles in the range of 60 nm in 1 single step. This straight forward method also allows for the synthesis of chitosan nanoparticles encapsulating multi-coloured QDs. In vitro 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) cytotoxicity tests on primary myoblast cells suggest that the cytotoxicity of the QDs is greatly reduced after chitosan encapsulation. At the same time, fluorescence confocal microscopy studies also prove that nanoparticles are small enough to be internalized into the myoblast cells. Our results show the ease of synthesizing biocompatible, nanometer-sized chitosan nanoparticles encapsulating QDs and their promise in biological applications such as ultra-sensitive bio-detection and labeling of biomolecules.     

Preparation of multilayered CdSe quantum dot sensitizers by electrostatic layer-by-layer assembly and a series of post-treatments toward efficient quantum dot-sensitized mesoporous TiO2 solar cells

A multilayer of CdSe quantum dots (QDs) was prepared on the mesoporous surface of a nanoparticulate TiO(2) film by a layer-by-layer (LBL) assembly using the electrostatic interaction of the oppositely charged QD surface for application as a sensitizer in QD-sensitized TiO(2) solar cells. To maximize the absorption of incident light and the generation of excitons by CdSe QDs within a fixed thickness of TiO(2) film, the experimental conditions of QD deposition were optimized by controlling the concentration of salt added into the QD-dissolved solutions and repeating the LBL deposition a few times. A proper concentration of salt was found to be critical in providing a deep penetration of QDs into the mesopore, thus leading to a dense and uniform distribution throughout the whole TiO(2) matrix while anchoring the oppositely charged QDs alternately in a controllable way. A series of post-treatments with (1) CdCl(2), (2) thermal annealing, and (3) ZnS-coating was found to be very critical in improving the overall photovoltaic properties, presumably through a better connection between QDs, effective passivation of QD's surface, and a high impedance of recombination, which were proved by transmission electron microscopy (TEM) and electrochemical impedance spectroscopy (EIS) experiments. With a proper post-treatment of multilayered QDs as a sensitizer, the overall power conversion efficiency in the CdSe QD-sensitized TiO(2) solar cells could reach 1.9% under standard illumination condition of simulated AM 1.5G (100 mW/cm(2)).     

SUBCELLULAR LOCALIZATION OF PORPHYRINS USING CONFOCAL LASER SCANNING MICROSCOPY

The in vitro subcellular distribution patterns of 10 porphyrins, varying in hydrophobicity and charge, were studied using confocal laser scanning microscopy on two cell lines (V79 and C6 glioma cells) for incubation times up to 24 h. All of the porphyrins were taken up rapidly by both cell lines and distinct classes of subcellular distribution patterns were observed: general cytoplasmic staining; localization in lysosomes (usually associated with general cytoplasmic staining); localization in mitochondria (and general cytoplasmic staining); localization in mitochondria with subsequent uptake into lysosomes. Structure-localization relationships which have emerged are that porphyrins with dominantly cationic side chains localize in mitochondria, whereas those with a more anionic character tend to localize in lysosomes.     

Spatiotemporal multicolor labeling of individual cells using peptide-functionalized quantum dots and mixed delivery techniques

Multicolor fluorescent labeling of both intra- and extracellular structures is a powerful technique for simultaneous monitoring of multiple complex biochemical processes. This approach remains extremely challenging, however, as it often necessitates the combinatorial use of numerous targeting probes (e.g., antibodies), multistep bioconjugation chemistries, different delivery strategies (e.g., electroporation or transfection reagents), cellular fixation coupled with membrane permeabilization, and complex spectral deconvolution. Here, we present a nanoparticle-based fluorescence labeling strategy for the multicolor labeling of distinct subcellular compartments within live cells without the need for antibody conjugation or cellular fixation/permeabilization. This multipronged approach incorporates an array of delivery strategies, which localize semiconductor quantum dots (QDs) to various subcellular structures. QD uptake is implemented in a spaciotemporal manner by staggering the delivery of QD-peptide composites and exploiting various innate (peptide-mediated endocytosis, peptide-membrane interaction, polymer-based transfection) along with physical (microinjection) cellular delivery modalities to live cells growing in culture over a 4 day period. Imaging of the different intracellular labels is simplified by the unique photophysical characteristics of the QDs in combination with Fo?rster resonance energy transfer sensitization, which allow for multiple spectral windows to be accessed with one excitation wavelength. Using this overall approach, QDs were targeted to both early and late endosomes, the cellular cytosol, and the plasma membrane in live cells, ultimately allowing for simultaneous five-color fluorescent imaging.