超短脉冲染料放大器中的参数研究

对超短脉冲染料放大器(DLA)中放大的自发辐射(ASE)随泵浦强度变化的关系进行了实验研究,为了求得具有高储能、低自发辐射背景噪声的染料激光放大器的泵浦强度,我们用速率方程对实验结果进行了解析分析,获得了染料激光放大器的泵浦强度与染料参数(浓度、增益长度等)的近似关系式,以及相应条件下染料激光放大器储能和小信号增益的表达式,并与实验进行了比较.二者符合较好,从而为染料激光放大器的设计提供了参考.     

饱和效应对激光场强度相关时间和有效本征值的影响

用全饱和激光模型对既含有加性又含有倍增噪声的激光场进行理论分析，求出了强度相关时间Ｔｃ的数值解和有效本征值λｅｆｆ的解析解。与实验测量相比较表明，全饱和激光模型与实验吻合得最好，而三次激光模型的偏差较大。     

溴化亚铜激光泵浦的可调谐微微秒染料激光

本文首次报道了利用脉宽为25ns重复率为10kHz的溴化亚铜激光泵浦混有饱和吸收体DODCI的超短腔染料激光,产生出30ps光脉冲.在理论上对混入DODCI的超短腔染料激光脉冲压缩效应作了分析计算,计算结果与实验基本一致.在实验上又通过一个放大-色散系统实现对此染料激光脉冲的同步放大和调谐,并达到傅里叶变换极限.     

几种紫外区新染料的光谱与激光特性

研究了4种新合成的7烷氧-4甲基香豆素染料.首次报道了它们的吸收光谱、荧光光谱及激光特质.与一般香豆素染料系列比较,新染料的荧光辐射峰向短波移动了60nm.这4种新染料在紫外区产生激射.本文测量了它们的激光波长调谐范围和激光能量转换效率.用时间分辨技术观测了其动力学荧光并确定了相应的荧光寿命.     

激光共振电离铝原子研究

就Ｎｄ：ＹＡＧ及其泵浦的染料激光进行铝原子三步共振电离。求解了非饱和共振过程速率方程，并获得解析解。在一些典型实验条件下，计算出基态和激发态吸收截面，给出电离效率分别与激发电离速率以及作用时间的关系，得到饱和激发电离的流量条件和通量条件等，并进行了讨论     

镓原子激光共振电离研究

就Ｎｄ：ＹＡＧ及其泵浦的染料激光进行镓原子三步共振电离。求解了非饱和共振过程的速率方程，并获得解析解；在一些典型实验条件下，计算出基态和激发态的吸收截面，给出电离效率分别与激发电离速率以及作用时间的变化关系，得到饱和激发电离的流量条件和通量条件等。并进行了讨论。     

超短脉冲激光烧蚀金属靶热分布的数值解与解析解

研究了超短脉冲激光烧蚀靶材的整个过程,对描述超短脉烧蚀过程热行为的双温度方程进行了分析简化,得出了超快激光烧蚀金属材料的解析解. 以铜靶材为例,对双温度模型的数值解与解析解做了对比分析,得到了靶材温度随时间和深度的变化规律,结果显示解析解的计算结果比较好的符合了数值解的计算结果.     

基于高斯型脉冲驱动的类镍瞬态X射线激光的流体力学模型

在激光脉冲为高斯型的条件下对瞬态X射线激光的流体力学自相似模型进行了修正，并将计算结果与自相似模型解析解的结果进行了比较.研究表明，修正模型的结果比解析解更为精确，从而验证了新模型的可靠性.利用该模型对类镍钼X射线激光实验进行了优化设计，得到了优化的实验方案. 关键词： 自相似模型 高斯型脉冲 类镍钼X射线激光     

用简并的四波混频补偿激光放大器相位畸变的方案

本文提出和实验论证了两种用简并的四波混频补偿激光放大器相位畸变的方案.在第一种方案中,混频介质饱和吸收体BDN染料二氯乙烷液体置于激光振荡器腔外,用偏振隔离技术,相位补偿的激光辐射从Nd:YAG激光振荡放大系统中耦合出来.实验得到了放大约四倍的后向波输出.在第二种方案中,相位共轭镜置于激光振荡器腔内,BDN染料溶液既作为简并的四波混频介质,又作为调Q介质,获得了补偿放大器相位畸变的调Q激光输出、研究了相位补偿特性.测量了激光输出与染料溶液浓度的关系.     

脉冲激光探测方位角磁电检测技术

针对常规弹药脉冲激光周向探测系统无法精确获取目标方位信息的问题,设计了基于磁电检测的单光束激光引信全向方位角探测方案.对磁电检测系统进行建模,建立圆柱形永磁体转动磁场模型,推导出磁阻传感器所测位置磁场的解析式,验证所测磁场为一正弦磁场信号.依据此正弦信号,设计了上升沿阈值周期检测算法,并运用FPGA与TDC-GP21对激光回波出现时间与电机转速信号周期进行高准确度时间间隔测量实现方位角的解算.依据方案设计原理样机并编写上位机程序,进行方位角探测实验.实验结果表明:磁电检测系统采用多重屏蔽方法,能有效抑制电磁干扰;并能实时监测电机转速,实现方位角解算,方位角解算误差在±2°以内.满足激光引信方位角测量的高准确度、抗干扰能力强等要求.     

Transient Properties of One-Dimensional Stochastic Processes: Unified-Colored-Noise Approximation

By virtue of the unified-colored-noise approximation the formulas of mean, variance and skewness of first-passage-time distributions (FPTD) for the systems driven by colored noise are derived. The mean and variance of FPTD of bistable system driven by colored noise are calculated. The approximation expressions of the mean, variance and skewness of FPTD for the colored cubic model of a dye laser are obtained. The role of the "color" of pump noise in the dye laser transient is analyzed.     

Dye laser model with pump and quantum fluctuations; colored noise

A single mode dye laser model with two stochastically fluctuating forces representing pump and quantum fluctuations is discussed. In extension to a previous paper we investigate the different influences ofcolored pump noise andwhite quantum fluctuations on the laser light statistics. The corresponding two-variable Fokker-Planck equation is solved by means ofmatrix continued fractions. A comparison to the model with two white noise forces is also included. We focus especially on the intensity correlation time enhancement observed for low noise strengths which seems to be the result of a competition between (multiplicative) pump noise and (additive) quantum noise. An increase in correlation time of the colored pump noise causes the intensity correlation time enhancement to disappear.     

Power spectra and spatial pattern dynamics of a ring laser

Experimental measurements of power spectra of a single longitudinal and transverse mode ring dye laser are presented that reveal the critical slowing down of the laser near threshold. External pump noise serves as a probe of the frequency response of the dye laser. Detailed comparisons of the spectral characteristics with computer simulations and an approximate analytic theory are given. The dynamics of spatial pattern formation in a multimode dye laser is examined through measurements of first-passage-time distributions. A comparison of the experiments with computer simulations based on a simple theoretical model of the two-mode laser shows qualitative agreement. These measurements indicate that there are a variety of complex phenomena associated with the transverse mode pattern formation dynamics that need to be addressed theoretically and studied further experimentally.     

Dye laser model with pump and quantum fluctuations; White noise

We discuss a single mode dye laser model with two stochastically fluctuating forces representing pump and quantum fluctuations. We investigate the different influences of white pump and quantum fluctuations on the statistical properties of the laser light intensity. The corresponding Fokker-Planck equations are solved by means of scalar continued fractions. Stationary as well as instationary properties such as distribution functions, stationary moments, correlation functions, correlation times and transient moments are presented.     

实虚部关联的量子噪声和泵噪声对单模激光动力学性质的影响

采用具有实虚部关联的量子噪声和泵噪声驱动的单模激光损失模型，用线性化近似方法研究了反映激光动力学性质的光强关联函数，讨论了光强关联函数随时间的演化；并对线性化近似方法的适用范围进行了详细分析，分别讨论了量子噪声强度、泵噪声强度、量子噪声实虚部关联系数对光强相对涨落的影响，得出在小噪声、远离阈值时，线性化近似方法适用范围扩大；小噪声、远离阈值且当量子噪声实虚部无关联时，线性化近似方法适用范围最大的结论. 关键词： 单模激光 光强关联函数 光强相对涨落     

Statistical properties of single-mode and two-mode ring lasers

Recent theoretical and experimental investigations of the statistical properties of single-mode and two-mode ring lasers are described. A theory of the frequency dependence of laser light fluctuations in a single-mode laser and the photoelectric experiments testing the predictions of this theory are discussed. For the case of two-mode ring lasers, a theoretical discussion of the steady-state and transient properties, such as photon statistics, first-passage-time distributions, correlations and phase locking, is given. Theoretical predictions are compared with the results of photoelectric measurements carried out on two-mode gas and dye ring lasers. A summary and the principal conclusions of this article are presented, and suggestions for further investigations are made.     

双模环型激光增益噪声模型的非线性效应

讨论了一个双模环型激光增益噪声模型，其中考虑了完全饱和效应且乘法噪声由增益系数涨落引起。在共振及两模具有相同泵参数时，获得了光强联合定态分布的精确解析表达式。通过与现有的双模激光摸型（其中乘法噪声由损失系数涨落引起）的比较，发现乘法噪声系数的非线性效应减弱了乘法噪声给激光光强统计性质带来的反常特性，并且这种减弱随着乘法噪声增强或损失系数减小而愈加明显。     

Fluctuations in synchronously mode-locked dye lasers

We present detailed experimental data on random fluctuations of the pulse properties of a cw rhodamine 6G dye laser synchronously pumped by an acousto-optically mode-locked argon ion laser. It is shown that quantitative information about the fluctuations of the energy, the pulse repetition time and the duration of the pulses can be obtained from the power spectrum of the laser intensity which is measured with the use of an electronic spectrum analyser. This method is capable of revealing small, subpicosecond temporal pulse jitter. We show that the dye laser pulses exhibit an absolute r.m.s. jitter of 20 ps which is induced by the pump laser. The relative jitter in a dual system can be less than 1 ps because well defined correlations of the output fluctuations exist when two lasers are pumped by a common source.     

Steady-State Analysis of a Single-Mode Laser Driven by Colored Pump Noise with Cross-Correlation Between Real and Imaginary Parts of Quantum Noise

Applying the method of the unified colored noise approximation and phase lock, we study in this paper the stationary intensity distribution of the single-mode laser driven by colored pump noise with cross-correlation between the real and imaginary parts of the quantum noise. We present a thorough discussion of how the cross-correlation λq between the real and imaginary parts of the quantum noise and the self-correlation time τ of the pump noise determine the behaviors of the stationary distribution Qst(I), the mean (I）, and the variance λ2(0) of the laser intensity. It is shown that cross-correlation intensity λq of the complex quantum noise can induce a first-order-like transition. When the pump noise is colored noise (τ≠0), improving the pump parameters monotonously will make the curves of Qst(I) exhibit reentrant phase transition. The fluctuations of laser intensity are strongly influenced by λq and τ when the laser is operated near or below threshold. Especially when τ≠0, the heights of the peaks of the curves of λ2(0)-α0 and α3(0)-α0, (here a0 is the net gain coefficient) go up as λq increases. However the entire curves λ2(0)-α0 and λ3(0)-α0 are abruptly suppressed when λq = 1, in similarity to phase transition of stationary intensity distribution.     

On the stability of the output characteristics of a grazing incidence grating dye laser transversely pumped by a copper vapor laser

The output characteristics of a high repetition rate pulsed dye laser has both short-term fluctuations and long-term drift. In high power high repetition rate lasers flow induced variations dominate over those due to other factors. In this paper it is shown by dye laser measurements that bandwidth fluctuations can be traced to the effective changes of the resonator dispersion due to fluctuations in the penetration depth of the pump beam in the dye medium. Short-term wavelength fluctuations can be traced to instantaneous deflection of the dye laser axis by the refractive index changes due to absorption of the pump beam. The fluctuations in both the bandwidth and the wavelength decreases with increasing flow rates within a laminar region. A copper vapor laser operating at 5.6 kHz repetition rate pumped the Rhodamine 6G dye laser used. The wavelength fluctuation of ±0.0035, 0.0030, 0.0004 nm and the bandwidth fluctuation of ±710, 132, 45 MHz over approx. 60 minutes were observed at 1.2, 3.7, 5.5 lpm flow rates respectively.