Molecularly imprinted beads by surface imprinting

Molecular imprinting is a state-of-the-art technique for imparting molecular recognition properties to a synthetic polymeric matrix. Conventionally, the technique is easily carried out using bulk imprinting, where molecularly imprinted polymers (MIPs) are prepared in large chunks and post-treatment processes like grinding and sieving are then required. However, this strategy tends to produce sharp-edged, irregular MIP bits with a limited scope of direct application. In addition, due to the creation of binding sites within the polymeric bulk, the issue of the hindrance of adsorbate diffusion (especially in the case of macromolecules) during template rebinding makes the MIPs prepared through this approach unsuitable for practical applications. Thus over the years, many efforts to address the limitations of conventional molecular imprinting techniques have resulted in new imprinting methodologies. Systems like suspension and precipitation polymerization, where MIPs with tunable morphologies can be prepared, have been developed. Additionally, strategies like surface imprinting have also been employed. Ultimately, both of these approaches have been combined to prepare regularly shaped surface-imprinted MIP beads. Such an approach incorporates the advantages of both methodologies at the same time. Given their desirable physical morphologies and favorable adsorption kinetics, MIPs prepared in this manner show significant promise for industrial applications. Therefore, they will be the main focus of this review.     

Molecularly imprinted macroporous monolithic materials for protein recognition

Synthetic materials that can specifically recognize proteins will find wide application in many fields.In this report,bovine serum albumin was chosen as the template protein.Acrylamide and N,N’-methylenebisacrylamide were employed as the functional and cross-linker monomers,respectively.Molecularly imprinted macroporous monolithic materials that can preferentially bind the template protein in an aqueous environment were prepared by combination of molecular imprinting technique and freezing/thawing preparation method.The resulted imprinted macroporous monolithic columns were evaluated by utilizing as stationary phase in high performance liquid chromatography and solid-phase extraction materials.The experimental results indicated that the imprinted macroporous monolithic column exhibited good recognition for template protein,as compared with the control protein(hemoglobin),whereas the non-imprinted polymer(prepared under the same conditions except without addition template protein) had no selective properties.     

Molecularly imprinted silica prepared with immiscible ionic liquid as solvent and porogen for selective recognition of testosterone

1-Butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF₄), an ionic liquid (IL) immiscible with water, was used as a new type of solvent and porogen for the preparation of molecularly imprinted silica. The new imprinted silica was prepared by a sacrificial spacer molecular imprinting approach with testosterone as template molecule. The new covalent monomer-template complex used in the imprinting procedure was synthesized via the reaction of 3-(triethoxysilyl)propyl isocyanate with testosterone. The imprinted silica was characterized by FT-IR spectroscopy, N₂ gas adsorption–desorption isotherm and the high-resolution transmission electron microscopy. Moreover, the selective adsorption ability of the imprinted particles towards testosterone was investigated by the steady-state binding experiment with testosterone propionate as its structural analogue. Results showed that the imprinted silica obtained in this study had relatively homogenous structure with numerous mesopores, indicating that the IL used here is an excellent solvent and satisfactory porogen for the preparation of imprinted materials. Moreover, ILs are more environmentally friendly than traditional organic solvents due to their negligible vapor pressure. The imprinted silica possesses highly specific recognition property and high binding capacity towards testosterone, showing that the new imprinting technique is relatively successful.     

Molecularly imprinted supermacroporous cryogels for cytochrome c recognition

Molecular imprinting is an attractive biomimetic approach that creates specific recognition sites for the shape and functional group arrangement to template molecules. The purpose of this study is to prepare cytochrome c-imprinted poly(hydroxyethyl methacrylate) (PHEMA)-based supermacroporous cryogel which can be used for the separation of cytochrome c from protein mixtures. N-Methacryloyl-(L)-histidinemethylester (MAH) was used as the metal-coordinating monomer. In the first step, Cu(2+) was complexed with MAH, and the cytochrome c imprinted PHEMA (MIP) cryogel was prepared by free radical cryopolymerization initiated by N,N,N',N'-tetramethylene diamine at -12°C. After polymerization is completed, the template cytochrome c molecules were removed from the MIP cryogel using 0.5 M NaCl solution. The maximum cytochrome c binding amount was 126 mg/g polymer. Selective binding studies were performed in the presence of lysozyme and bovine serum albumin. The relative selectivity coefficients of MIP cryogel for cytochrome c/lysozyme and cytochrome c/bovine serum albumin were 1.7 and 5.2 times greater than those of the non-imprinted PHEMA cryogel, respectively. The selectivity of MIP cryogel for cytochrome c was also confirmed with fast protein liquid chromatography. The MIP cryogel could be used many times with no remarkable decrease in cytochrome c binding capacity.     

Molecularly imprinted polymers with halogen bonding-based molecular recognition sites

Molecular recognition materials bearing halogen bonding-based binding sites were synthesized by a non-covalent imprinting technique using a 2,3,5,6-tetrafluoro-4-iodostyrene (TFIS) as the functional monomer. The binding sites were generated by co-polymerizing TFIS, styrene and divinylbenzene in the presence of the template molecule (4-dimethylaminopyridine—DMAP). The imprinted polymer preferentially adsorbed aminopyridine derivatives, suggesting that halogen bonding may play a role in the selective recognition of analytes by the synthesized synthetic receptor.     

Molecularly imprinted monoliths: Recent advances in the selective recognition of biomacromolecules related biomarkers

Biomarkers are significant indicators to assist the early diagnosis of diseases and assess the therapeutic response. However, due to the low abundance of biomarkers in complex biological fluids, it is highly desirable to explore efficient techniques to attain their selective recognition and capture before the detection. Molecularly imprinted monoliths integrate the high selectivity of imprinted polymers and the rapid convective mass transport of monoliths, and as a result, are promising candidates to achieve the specific enrichment of biomarkers from complex samples. This review summarizes the various imprinting approaches for the preparation of molecularly imprinted monoliths. The state-of-art advances as an effective platform for applications in the selective capture of biomacromolecules related biomarkers were also outlined.     

Molecularly imprinted polymers for the selective solid-phase extraction of chloramphenicol

A variety of bulk polymers for the selective separation of chloramphenicol were synthesised from 2-vinylpyridine, diethylaminoethyl methacrylate or methacrylic acid monomers. Chromatographic evaluation indicated that chloramphenicol was retained under nonpolar elution conditions (k = 58.65) through selective hydrogen bonding and ionic interactions. The retention of chloramphenicol under aqueous elution conditions (k > 100) results from nonselective hydrophobic interactions. Under nonpolar elution conditions, the functional monomer employed imparted a significant influence on the recognition properties of the corresponding polymer. After solid-phase extraction using a molecularly imprinted polymer as sorbent and either an organic or aqueous washing solvent, nearly 100% recovery from the chloramphenicol standard solution was achieved, and nearly 90% recovery could be attained from spiked honey samples. The molecularly imprinted polymer was well suited to suppress matrix effects, and provided optimal preconcentration of the target molecule (chloramphenicol) prior to chromatographic analysis.     

利用辅助识别聚合物链制备牛血清白蛋白分子印迹聚合物

论文提出了一种新的蛋白质分子印迹方法, 即以聚乙烯醇接枝聚合物作为辅助识别聚合物链(ARPCs), 以丙烯酰胺为单体, 在丙烯酸酯树脂载体表面进行聚合, 制备牛血清白蛋白分子印迹树脂. 实验使用2.00 mol•L⁻¹氯化钾(KC1)溶液除去模板蛋白质, 使用十二烷基磺酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)检测吸附蛋白质, 并设计使用0.150, 0.500和2.00 mol•L⁻¹KC1溶液分别对吸附蛋白质进行梯度洗提. 电泳实验结果表明, 2.00 mol•L⁻¹KC1溶液洗脱的蛋白质是大孔树脂的吸附效应; 0.500 mol•L⁻¹KC1溶液洗脱掉的是印迹蛋白质. 引入ARPCs制得的分子印迹树脂, 用于混合蛋白质体系吸附时, 对模板蛋白质的吸附量为80~100μg•g⁻¹, 其特异性吸附能力较未引入ARPCs之前有明显提高.     

Molecularly imprinted polymers with assistant recognition polymer chains for bovine serum albumin

A new protein molecularly imprinted polymer (MIP) was prepared with grafting polyvinyl alcohol as assistant recognition polymer chains (ARPCs). The ARPCs and acrylamide monomers were interpenetrated and then polymerized on the surface of macroporous acrylate adsorbent spheres. The template BSA was removed by treatment with 2.00 mol L-1 potassium chloride (KCl) solution and the adsorbed proteins were detected with sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). 0.150, 0.500, and 2.00 mo...     

Molecularly imprinted stationary phase prepared by reverse micro-emulsion polymerization for selective recognition of gatifloxacin in aqueous media

A new stationary phase for selectively recognizing gatifloxacin in aqueous media based on molecularly imprinted microspheres (MIMs) has been prepared by water/oil reverse micro-emulsion polymerization. The MIMs were prepared using gatifloxacin as the template, N, N'-methylenebisacrylamide as cross-linker and acrylamide and acryloyl-β-CD (β-CD-A, synthesized by ester reaction of acrylic acid with β-CD) as combinatorial functional monomers. The surface morphology of MIMs was characterized by scanning electron microscopy. The properties of MIMs recognition for gatifloxacin in water were studied by adsorption kinetics, adsorption isotherms combined with Scatchard analysis and selective recognition experiments. The results showed that the synthesized MIMs had an excellent ability to selectively recognize gatifloxacin in aqueous media. MIMs were employed as the chromatographic stationary phase to successfully separate the template gatifloxacin from its analogues. Discovering the mechanism of the MIMs recognition revealed that the memory cavities in the surface of the MIMs and hydrophobic effects between the template and the cavities of the β-CD residues were the primary contributions to the special recognition process.     

Molecularly imprinted polymer nanocarriers for recognition and sustained release of diclofenac

In this study, a series of imprinted poly(methacrylic acid‐co‐ethylene glycol dimethacrylate) nanocarriers for diclofenac and corresponding nonimprinted polymer nanocarriers have been synthesized in 4 different types of solvents by precipitation polymerization. The products were characterized by Fourier transform infrared, scanning electron microscopy, dynamic light scattering, and Brunauer‐Emmett‐Teller measurement. Results showed that uniformly sized molecularly imprinted polymer (MIP) nanospheres with relatively good porosity could only be obtained in acetonitrile. The effects of solvents on the recognition and release properties of polymer particles were also carefully investigated. The binding experiments indicated that MIPs prepared in acetonitrile displayed much higher binding capacity than other MIPs with a maximum binding capacity of 65.18 mg g⁻¹. The Scatchard analysis showed that synthetic MIPs have special recognition sites for diclofenac, while nonimprinted polymers have not. The Sips model could provide a best fit to the equilibrium data of nanocarriers over whole concentrations. The experimental data of an adsorption kinetic study were well fitted to the pseudo–second‐order kinetic model, indicating the chemisorption mechanism between diclofenac and MIPs in the process of adsorption. The drug release of diclofenac from MIPs could well be described by the Ritger‐Peppas model, suggesting a non‐Fickian diffusion mechanism. In addition, we successfully used MIPs to extract diclofenac at low levels from fetal bovine serum.     

Molecularly imprinted silica as a selective SPE sorbent for triazine herbicides

A molecularly imprinted organically modified silica was prepared through a simple sol‐gel procedure and evaluated as a specific sorbent for SPE of triazine herbicides. The material proved to be highly selective for the template molecule, atrazine, as well as for other structurally related species such as simazine and propazine. The performance of this material was shown to be comparable with commercial acrylate‐based molecularly imprinted polymers. The molecularly imprinted silica was applied for the determination of trace levels of the target triazine analytes in sugar cane juice (locally called “garapa”).     

Molecularly imprinted polymer prepared with bonded beta-cyclodextrin and acrylamide on functionalized silica gel for selective recognition of tryptophan in aqueous media

The rapid, sensitive and simultaneous determination of six polyamines, i.e., ornithine (ORN), 1,3-diaminopropane (DAP), putrescine (PUT), cadaverine (CAD), spermidine (SPD) and spermine (SPM), in human hairs was performed by ultra-performance liquid chromatography (UPLC) with fluorescence (FL) detection and electrospray-ionization time-of-flight mass spectrometry (ESI-TOF-MS). The primary (-NH(2)) and secondary (-NH) amines in the polyamine structures were first labeled with 4-(N,N-dimethylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (DBD-F) at 60 degrees C for 30min in the mixture of 0.1M borax (pH 9.3) and acetonitrile (CH(3)CN). The resulting derivatives were perfectly separated using an ACQUITY UPLCtrade mark BEH C(18) column (1.7mum, 100mmx2.1mm i.d.) by a gradient elution with a mixture of water-acetonitrile containing 0.1% formic acid (HCOOH). The separated polyamine derivatives were sensitively detected with both FL and TOF-MS. The detection limits in FL and TOF-MS were 11-86 and 2-5fmol, respectively. However, the determination of several polyamines by FL detection was interfered with by endogenous substances in the hair. Therefore, the simultaneous determination in hair was carried out by the combination of UPLC separation and the ESI-TOF-MS detection. The structures of the polyamines were identified from the protonated-molecular ions [M+H](+) obtained from the TOF-MS measurement. A good linearity was achieved from the calibration curves, that was obtained by plotting the peak area ratios of the analytes relative to the internal standard (IS), i.e., 1,6-diaminohexane (DAH), against the injected amounts of each polyamine (0.05-50pmol, r(2)>0.999). The proposed method was applied to the determination in the hairs of healthy volunteers. The mean concentrations of ORN, DAP, PUT, CAD, SPD and SPM in 1mg of human hairs (n=20) were 1.46, 0.18, 1.18, 0.11, 1.97 and 0.98pmol, respectively. Because the proposed method provides a good mass accuracy and the trace detection of the polyamines in hair, this analytical technique seems to be applicable for the determination of various biological compounds in hair.     

Molecularly imprinted polymers microsphere prepared by precipitation polymerization for hydroquinone recognition

A one-step precipitation polymerization synthesis was adopted for the preparation of molecularly imprinted polymers (MIPs) by using hydroquinone as a template molecule. The transmission electron microscopy (TEM) exhibited that the polymers were uniform spheres with the diameter of about 700 nm. The results of adsorption experiments showed that the microspherical imprinted polymers possessed fast adsorption dynamics. Compared to the structurally similar compounds, catechol and resorcinol, the MIPs exhibited a high recognizable capacity to hydroquinone. And the electrochemical sensor fabricated by modifying the prepared MIPs microsphere on the glassy carbon electrode surface was used to detect the hydroquinone concentration. The current response was proportional to the concentration of hydroquinone in the range of 2.0 x 10(-6) to 1.0 x 10(-4)mol/L with the detection limit of 1.0 x 10(-6)mol/L.     

Synthesis and selective recognition property of Ni2+‐imprinted microporous polymer beads

Nickel ion‐imprinted polymer (IIP) was synthesized from dimethylglyoxime and 4‐vinyl pyridine monomers. These functional monomers were self assembled with the Ni²⁺ template and then copolymerized with divinylbenzene and ethylene glycol dimethacrylate crosslinkers in toluene porogen via suspension polymerization. Imprinting was achieved by removing the template ion from the copolymers by extensive washing. The IIP particles produced were 300–700 µm in diameter and were spherical. The chemical and physical structures were characterized by Fourier transform infrared spectroscopy, energy dispersive X‐ray spectroscopy, and Brunauer–Emmett–Teller analysis. The adsorption capacity and kinetics, and separation selectivity were investigated using atomic adsorption spectroscopy in batch adsorption operation mode. The Ni²⁺‐imprinted polymers showed excellent adsorption ability and selective separation property. The adsorption capacity for Ni²⁺ was 320 µmol/g, and the selectivity factors (α) for Cu²⁺, Zn²⁺, Fe²⁺, and Cd²⁺ were 6, 11, 12, and 27, respectively. The adsorption capacity and separation selectivity were affected by the environmental pH, as the protonation easily took place in acidic condition. Copyright © 2013 John Wiley & Sons, Ltd.     

Molecularly imprinted capillary electrochromatography for selective determination of thiabendazole in citrus samples

In this work, the suitability of the combination of molecular imprinting and capillary electrochromatography (MIP-CEC) to be used as powerful tool in environmental or food analysis has been for the first time studied and successfully demonstrated. A molecularly imprinted monolith (MIM) has been synthesised and evaluated as stationary phase for the selective determination of the fungicide thiabendazole (TBZ) in citrus samples by non-aqueous capillary electrochromatography. The influence of the mobile phase composition, the voltage of the power supply and the separation temperature on the recognition of TBZ by the imprinted polymer has been evaluated, and the imprint effect in the MIM was clearly demonstrated. Once optimum recognition conditions were established, other variables affecting mechanical properties and chromatographic performance of MIM were adjusted using computational approach. The high selectivity achieved by the MIP-CEC developed procedure allowed unambiguous detection and quantification of TBZ in citrus samples by direct injection of the crude sample extracts, without any previous clean-up, in less than 6 min. The developed method was properly validated and the calculated detection limits were below the established maximum residue limits (MRLs), clearly demonstrating the suitability of the method to be used for the control of the selected fungicide.     

Molecularly imprinted stir bars for selective extraction of thiabendazole in citrus samples

Stir‐bar sorptive extraction is based on the partitioning of target analytes between the sample (mostly aqueous‐based liquid samples) and a stationary phase‐coated magnetic stir bar. Until now, only PDMS‐coated stir bars are commercially available, restricting the range of applications to the non‐selective extraction of hydrophobic compounds due to the apolar character of PDMS. In this work, a novel stir bar coated with molecularly imprinted polymer as selective extraction phase for sorptive extraction of thiabendazole (TBZ) was developed. Two different procedures, based on physical or chemical coating, were assessed for the preparation of molecularly imprinted stir bars. Under optimum conditions, recoveries achieved both in imprinted and non‐imprinted polymer stir bars obtained by physical coating were very low, whereas TBZ was favourably retained by imprinted over non‐imprinted polymer stir bars obtained by chemical coating and thus the latter approach was used in further studies. Different parameters affecting both stir‐bars preparation (i.e. cross‐linker, porogen, polymerization time) and the subsequent selective extraction of TBZ (i.e. washing, loading and elution solvents, extraction time) were properly optimized. The molecularly imprinted coated stir bars were applied to the extraction of TBZ from citrus samples (orange, lemon and citrus juices) allowing its final determination at concentrations levels according to current regulations.