Characterization of prehistorical glass beads excavated from Khao Sam Kaeo (Chumphon, Thailand) using PIXE and SEM–EDS

It was proved that non-destructive and non-sampling methods were used to analyze the composition of the archaeological glasses. Glass has been used in ornaments and decoration in Thailand for thousands of years. In this study, glass bead fragments found from the archaeological site at Khao Sam Kaeo, Chumphon Province, southern Thailand were analyzed by the proton induced X-ray emission spectroscopy (PIXE) and scanning electron microscope coupled with energy dispersive X-ray fluorescence spectroscopy (SEM?CEDS). The composition analysis showed that copper was mainly presence as the colorant. Titanium, common impurity in sand, was all present in the glass bead samples. Furthermore, this type of glass almost spread over the various sites in this region that demonstrated the long distance or exchange connections. Finally, PIXE and SEM?CEDS have been used to be the efficient techniques to analyze the archaeological objects, especially the glassy materials, to understand their characteristics and how they were produced in ancient times.     

An investigation of the feasibility of applying Raman microscopy for exploring stained glass

Raman microscopy (RM) is widely used in archaeometrical studies of pigments, geomaterials and biomaterials in the Cultural Heritage, but one domain has received relatively less attention: the colouring of stained glass. This feasibility study investigates the advantages and disadvantages of employing RM alone in this field by means of a study of modern commercial glasses, modern commercial pigments, and a few archaeological stained glasses, but especially by an experimental project whereby the authors created stained glass. The different kinds of possible unreacted or reacted material are rigorously established. The distinction between Na, K, Ca glasses was explored, as well as the red colouring of an industrial glass which was proved to be due to the presence of (Zn, Cd)S(x)Se(1-x). Yellow, green, blue and maroon pigments were studied before and after an initial firing and then after heating on glass. The quality of the Raman spectra varied enormously and was sometimes disappointing. Nevertheless RM successfully identified various coloured products such as bindheimite, crocoite, cobalt aluminate, haematite; relict reactants such as corundum, eskolaite and oxides of Co or Pb; and provided indications of other phases such as maghemite or Co-olivine. One conclusion is that the amount of chemical reaction between the pigments and the glass is small compared to the amount in between the pigments. Comments are made on the potential for dating archaeological glass from the known age of synthesis of the pigments, and of the dangers of this approach. Overall it has been shown that RM can be useful for studying stained glass, especially for remote in situ analytical operations with mobile RM, but one must expect some problems either with fluorescence or weak spectra.     

Laser induced breakdown spectroscopy for analysis and characterization of degradation pathologies of Roman glasses

The feasibility and possibilities of laser induced breakdown spectroscopy (LIBS) in the full study of non-destructible historic glasses have been explored in the present work. Thirteen Roman glass samples, including seven entire glass beads, from the ancient town of Augusta Emerita (SW Spain) were characterized by LIBS in combination with other conventional techniques, such as scanning electron microscopy/energy dispersive X-ray spectrometry, X-ray fluorescence and ultraviolet–visible spectrophotometry. LIBS stratigraphic analysis, carried out by the application of successive laser pulses on the same spot, has been mainly targeted at characterizing particular features of non-destructible historic glasses, such as bulk chemical composition, surface degradation pathologies (dealkalinization layers and deposits), chromophores, and opacifying elements. The obtained data demonstrate that LIBS can be a useful and alternative technique for spectroscopic studies of historical glasses, especially for those conserved under burial conditions and when it deals with studying non-destructible samples.     

Characterization of the chemical composition of archaeological glass finds from South-Eastern Bulgaria using PIXE, PIGE and ICP-AES

Using PIXE (proton induced X-ray emission), PIGE (proton induced gamma emission) and ICP-AES (inductively coupled plasma-atomic emission spectroscopy) the concentrations of the 24 elements Al, As, Ba, Br, Ca, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Pb, Rb, S, Sb, Si, Sn, Sr, Ti, Zn and Zr in 53 archaeological glass samples from South-Eastern Bulgaria, were determined. The glasses are dated from the 1st to 6th century AD. The analytical data showed the samples to be typical soda-lime-silica glass, with natron as flux. A rather broad range of aluminium, titanium and iron impurities was found, with a tendency for more impure glass in the later periods. The decolouring agents were antimony and manganese oxides, with Sb prevailing in earlier, and Mn in later glass.     

Data from Multiple Portable XRF Units and Their Significance for Ancient Glass Studies

X-ray fluorescence spectroscopy is a non-destructive technique employed for elemental analysis of a wide range of materials. Its advantages are especially valued in archaeometry, where portable instruments are available. Considering ancient glass, such instruments allow for the detection of some major, minor, and trace elements linked to the deliberate addition of specific components or to impurities in the raw materials of the glass batch. Besides some undoubted advantages, portable XRF (p-XRF) has some limitations that are addressed in this study. The performance assessment of four different p-XRF units and the reconciling of their output were conducted. The results show the limitations in cross-referencing the data obtained from each unit and suggest procedures to overcome the issues. The p-XRF units were tested on the set of Corning reference glasses and on a small set of archaeological glasses with known composition. The compatibility of the output was assessed using multivariate statistical tools. Such a workflow allows us to consider data from multiple sources in the same frame of reference.     

A Study on Corrosion Processes of Archaeological Glass from the Valencian Region (Spain) and its Consolidation Treatment

The combined use of scanning electron microscopy/energy dispersive X-ray microanalysis (SEM/EDX) and square wave voltammetry (SQWV), is used for studying the corrosion processes that have taken place in buried glass from different archaeological sites in the Valencian Region (Spain). The procedures permit a parallel investigation of morphology and chemical composition. Determination of the chemical composition of the glasses and their alteration crust and identification of the elements responsible for the colour has been also carried out using energy dispersive X-ray microanalysis. The electrochemical response of samples attached to paraffin-impregnated graphite electrodes reveals the presence of different iron and manganese oxide species in the browning areas of the corroded glass. Image analysis applied to microphotographs obtained by means of SEM led to the determination of morphological parameters concerning the corrosion phenomena occurring on the surface of the fragments such as thickness of the corrosion layer and its laminated structure. Additionally, measurement of the thickness of the film of polymer used as coating in the consolidation treatments has been carried out using cryo-scanning electron microscopy (cryo-SEM) combined with image analysis.     

氧化钆对铁磷酸盐玻璃结构的影响

为探究Gd2O3含量对40Fe2O3-60P2O5(mol%)基础玻璃结构的影响,采用传统熔融-冷却法制备xGd2O3-(100-x)(40Fe2O3-60P2O5)(0≤x≤12mol%)系列玻璃。利用XRD、SEM、FTIR和Raman等手段对玻璃结构进行表征,并测试了玻璃密度和维氏硬度。结果表明,在Gd2O3含量小于等于4mol%时,易形成均质玻璃,在此范围内,玻璃密度和硬度都随Gd2O3含量的增加而增加,玻璃结构以焦磷酸盐结构为主,并伴随少量的正磷酸盐和偏磷酸盐结构。在磷酸盐玻璃结构中,Gd3+作为网络修饰离子,位于玻璃网络结构间隙。     

Application of total reflection X-ray fluorescence spectrometry to small glass fragments.

Total reflection X-ray fluorescence spectrometry (TXRF) has been applied for trace elemental analysis of small glass fragments. A small glass sample (a fragment with weight less than 0.5 mg) was decomposed by 100 microg of HF/HNO3 acid; the material was condensed to 10 microl and was dried on a Si wafer. Since the size of the dried residue on the Si wafer was less than 1 cm in diameter, an incident X-ray beam with about 1 cm in width could effectively excite elemental components in such a small glass fragment. The precision of the present technique was checked by analyzing the glass fragments (<0.5 mg) from NIST SRM612; the relative standard deviations (RSD) of less than 8.1% were achieved for elemental ratios that were normalized by Sr. Fragments (<0.5 mg) obtained from 23 figured sheet glasses were used as samples for estimating the utility of this technique to forensic discrimination. Comparison of five elemental ratios of Ti/Sr, Mn/Sr, Zn/Sr, Rb/Sr, and Pb/Sr calculated from X-ray fluorescence spectra was effective in distinguishing glass fragments that could not be differentiated by their refractive indexes (RI).     

Forensic discrimination of sheet glass by a refractive-index measurement and elemental analysis with synchrotron radiation X-ray fluorescence spectrometry.

Measurements of the refractive index (RI) and elemental analysis using synchrotron radiation X-ray fluorescence spectrometry (SR-XRF) were applied to the forensic discrimination of sheet-glass samples from different origins. The refractive index was calculated from the matching temperature at which the glass fragments became invisible in silicone oil. Fragments smaller than 1 mm in maximum diameter were taken from each of 11 sheet glasses and subjected to analysis by SR-XRF. The XRF spectrum of these samples indicated that a comparison of 6 elements (Ca, Fe, Sr, Zr, Ba and Ce) was useful for the discrimination of sheet glasses. Cluster analysis was performed using 33 sets of SR-XRF data obtained by triplicate measurements for the 11 glasses. Comparing 528 pairs among 33 samples, 515 pairs could be correctly discriminated. The number of indistinguishable pairs could be reduced from 36 to 4 by comparing the SR-XRF data. Elemental analysis by SR-XRF could provide small glass fragments with a more evidential value than the solely measurement of only RI, through a significant improvement of the discrimination capability.     

XAS study on copper red in ancient glass beads from Thailand

Glass has been used in ornaments and decorations in Thailand for thousands of years, being discovered in several archeological sites and preserved in museums throughout the country. To date only a few of them have been examined by conventional methods for their compositions and colorations. In this work we report for the first time an advanced structural analysis of Thai ancient glass beads using synchrotron X-ray absorption spectroscopy (XAS) and energy-dispersive X-ray (EDX) spectrometry. Four samples of ancient glass beads were selected from four different archeological sites in three southern provinces (Ranong, Krabi and Pang-nga) of Thailand. Archaeological dating indicated that they were made more than 1,300 years ago. A historically known method for obtaining a red color is to add compounds containing transition elements such as gold, copper, and chromium. For our samples, EDX spectrometry data revealed existing fractions of iron, copper, zinc, and chromium in ascending order. Thus, copper was selectively studied by XAS as being potentially responsible for the red color in the glass beads. K-shell X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) of copper were recorded in fluorescence mode using an advanced 13-element germanium detector. Comparisons with XANES spectra of reference compounds identified two major forms of copper, monovalent copper and a metallic cluster, dispersed in the glass matrix. The cluster dimension was approximated on the basis of structural modeling and a theoretical XANES calculation. As a complement, EXAFS spectra were analyzed to determine the first-shell coordination around copper. XAS was proven to be an outstanding, advanced technique that can be applied to study nondestructively archaeological objects to understand their characteristics and how they were produced in ancient times.     

Lead determination in glasses by laser-induced breakdown spectroscopy

Laser-induced breakdown spectroscopy (LIBS) has been used to determine the lead content of different types of lead silicate glasses commercially designed as sonorous glass (which contain ∼ 10 wt.% PbO); crystal glass (with at least 24 wt.% PbO) and superior crystal glass (with at least 30 wt.% PbO). Seven different types of glass samples were selected, including historic-original, model and commercially available. The selected samples were artificially weathered under neutral, acid and alkaline attack. Analysis by LIBS was carried out in vacuum under excitation at 266 nm and results were compared with those obtained by conventional techniques used for glass characterization. Composition of the bulk glasses was analyzed by XRF (X-ray fluorescence) and the corroded surfaces were characterized by SEM/EDX (scanning electron microscopy/energy dispersive X-ray microanalysis). A linear correlation was obtained between the intensity of selected Pb lines in the LIB spectra and the PbO content. The effect of corrosion could be characterized by comparing successive LIB spectra recorded on the same area; acid attack resulted in a decrease of PbO, CaO and Na₂O content in the surface with respect to the bulk of the sample, while minor changes in the composition were noticed under alkaline attack. These results show LIBS as a useful technique to classify the different types of lead glasses by their lead content and to determine and asses the degree and type of corrosion.     

Noninvasive methods for the investigation of ancient Chinese jades: an integrated analytical approach

This paper reports on an integrated analytical approach for the noninvasive characterization of Chinese nephrite samples, encompassing both geological reference specimens and museum objects. Natural variations induced by cationic substitutions, as well as human-induced alterations such as heating, which both affect color, are the focus of this contribution. Totally noninvasive methods of analysis were used, including X-ray fluorescence spectroscopy, Raman microspectroscopy, visible reflectance spectroscopy and X-ray diffraction; moreover, the feasibility of using a portable Raman spectrometer for the in-field identification of jades has been demonstrated. Fe/Fe+Mg (% p.f.u.) ratios of the jades have been calculated based on hydroxyl stretching Raman bands, which will provide an important addition to similar data that are being collected at major museums in the Western and Eastern hemispheres.      

Redox behavior of molybdenum and tungsten in phosphate glasses

In this work, vitreous samples were prepared in the binary system (100 - x)NaPO3-xMO3 with M = Mo and W and x varying from 10 to 60. The transmittance properties in the UV, visible, and near-infrared were monitored as a function of MO3 concentration. In both cases, an increase in the amount of transition metal results in an intense and broad absorption band in the visible and near-infrared attributed to metal reduction under synthesis conditions. It was shown that this large absorption can be partially or totally removed using specific oxidizing agents or by improving synthesis parameters such as melting temperature or cooling rate of the melt. In addition, structural investigations by Raman and X-ray absorption spectroscopy suggest that reduction only occurs when the metal cation is in octahedral geometry and that the transmittance improvement is not related with any structural changes. These results were explained in terms of thermodynamic equilibrium of redox species in the melt and allowed to obtain for the first time transparent and chemically stable glasses containing high concentrations of MO3 with transition metals in octahedral geometry inside the glass network.     

Scanning electron microscopy and energy dispersive analysis: applications in the field of cultural heritage

Scanning electron microscopy has been extensively used for the material characterization of objects of artistic and archaeological importance, especially in combination with energy dispersive X-ray microanalysis (SEM/EDX). The advantages and limitations of SEM/EDX are presented in a few case studies: analysis of pigments in cross-sections of paint layers, quantitative analysis of archaeological glass from the Roman period excavated in Ephesos/Turkey, and investigations on glasses with medieval composition concerning their weathering stability and degradation phenomena.     

Eu3+-Tb3+共掺杂SiO2-B2O3-Na2O-Y2O3-P2O5玻璃陶瓷的制备与发光性能

采用高温熔融法制备Eu3+?Tb3+共掺杂SiO2?B2O3?Na2O?Y2O3?P2O5前驱体玻璃。对前驱体玻璃粉末进行差示扫描量热(DSC)分析,确定玻璃陶瓷样品的热处理温度。前驱体玻璃热处理后,采用X射线衍射(XRD)和扫描电镜(SEM)分析可知前驱体玻璃中有Na3.6Y1.8(PO4)3晶粒析出。利用荧光光谱对玻璃陶瓷样品的发光性能进行表征,同时分析了Tb3+离子的荧光衰减曲线,确定Eu3+、Tb3+离子的发光机理以及能量传递过程。通过对Eu3+?Tb3+共掺杂玻璃陶瓷样品的发射光谱采集并用色坐标软件和色温计算程序,获得玻璃陶瓷样品的色坐标和相关色温。     

Characterization of Wallpaintings from the Caliphal Baths of Cordoba (Spain) by X-Ray Diffraction and Raman Microspectroscopy

Wallpainting fragments from the Caliphal Baths of Cordoba, Spain, were studied in this work for the first time. X-ray diffraction (XRD) and Raman microspectroscopy allowed the chemical nature of the pigments used by the Arabic artists of the time to be identified. All pigments were applied over a gypsum priming layer. The white, red, and yellow colors used were obtained from gypsum, hematite, and goethite, respectively. Some pigments were prepared by mixing these materials. The analytical techniques used also allowed the mortar material to be identified. The results of this study may be useful to develop effective conservation strategies for archaeological remains.     

On the Origin of the Large Stokes-Shift of the Emission of CdS Nanoparticles Embedded in a Phosphate Glass Matrix

XRD and TEM characterisation evidenced the formation of well-dispersed CdS nanoparticles inside a phosphate glass matrix. Optical absorption and time-resolved photoluminescence study were carried out on the prepared glass samples. Optical absorption revealed the fast character of the growth of CdS nanoparticles in this medium. Photoluminescence spectra showed only one large band with a maximum at almost 740 nm, which was associated to transitions between energy levels within the bandgap of the CdS nanoparticles. From the steady state and time-resolved measurements, it was suggested that the emission comes mainly from sulfur vacancies inside the nanocrystals and on its surface, which act as deep traps for the photogenerated electrons. The creation of such vacancies was attributed to the loss of sulfur during the glass preparation as evidenced from a chemical analysis using energy dispersive X-ray spectrometry. These traps may be also induced by the fast growth of CdS nanocrystals in this matrix or laser exposure during PL measurements. These CdS-doped glasses with an intense absorption in the UV–Vis region and a large emission band with long lifetime and a large Stokes-shift are adequate for luminescent solar concentrators, photocatalytic applications and solid-state lasers.     

Sm3+掺杂CaO-SiO2-B2O3发光玻璃的制备、表征及性质

用高温固相法合制备了以CaO-SiO₂-B₂O₃为基质，Sm³⁺为激活离子的发光玻璃。对Sm³⁺的淬灭浓度、基质中的硼硅比例、其他稀土离子的敏化作用以及基质组成等因素对玻璃发光特性的影响进行了探讨，并用红外和X-衍射分析对样品的结构进行了表征。结果表明：当Sm^3＋掺杂的物质的量分数为1.2%,激发波长λ ＝ 404 nm时,玻璃体60CaO-20SiO₂-20B₂O₃∶1.2Sm^3＋的发光强度为4 838 A.U.( λ ＝ 606 nm );这种发光玻璃具有将紫外及近紫外光转换为橙红色光的特点。少量的Eu^3＋的掺入，对玻璃体的发光起敏化作用；玻璃体中的组分CaO可被ZnO替代。     

Intense upconversion luminescence and effect of local environment for Tm3+/Yb3+ co-doped novel TeO2-BiCl3 glass system

We present the results of a study that uses theoretical and experimental methods to investigate the characteristics of the upconversion luminescence of Tm3+/Yb3+ codoped TeO2-BiCl3 glass system as a function of the BiCl3 fraction. These glasses are potentially important in the design of upconversion fiber lasers. Effect of local environment around Tm3+ on upconversion fluorescence intensity was analyzed by theoretical calculations. The structure and spectroscopic properties were investigated in the experiments by measuring the Raman spectra, IR transmission spectra, and absorption and fluorescence intensities at room temperature. The results indicate that blue luminescence quantum efficiency increases with increasing BiCl3 content from 10 to 60 mol%, which were interpreted by the increase of asymmetry of glass structure, decrease of phonon energy and removing of OH- groups.     

Possibilities of the Determination of Matrix Elements of High-Purity Glasses of As–Se and As–S Systems by Inductively Coupled Plasma Atomic Emission Spectrometry

Possibilities of inductively coupled plasma atomic emission spectrometry (ICP AES) as an alternative to X-ray spectrochemical analysis are estimated in the determination of matrix elements of glasses of As–Se and As–S systems. Standard solutions were prepared from pure elements As, Se and S. It was shown that the matrix elements of glasses can be determined with an expanded uncertainty of 0.05–0.1 mol %. The results of determinations by ICP AES and X-ray fluorescence spectrometry were compared; and it was found that by the attained performance characteristics, the results of ICP AES are highly competitive with the data of X-ray fluorescence spectrometry, but do not require sets of adequate solid reference samples.