毛刺状竹节结构氮化硼纳米管的合成与生长机理

以非晶硼和氧化镍纳米颗粒为原料,在氨气中1100 oC下合成了毛刺状竹节结构的氮化硼纳米管. 利用X射线衍射和透射电镜研究了氮化硼纳米管的结构和形貌. 竹节结构纳米管表面的毛刺是六方氮化硼的纳米薄片. 提出了一种基于固态硼和气态二氧化硼扩散的毛刺形貌生长机理.     

氮化硼纳米管阵列储氢的计算机模拟

采用巨正则蒙特卡罗方法模拟常温、中等压强下单壁氮化硼纳米管阵列的物理吸附储氢,重点研究压强、纳米管阵列的管径和管间距对单壁氮化硼纳米管阵列物理吸附储氢的影响.计算结果表明,氮化硼纳米管阵列的储氢性能明显优于碳纳米管阵列,在常温和中等压强下的物理吸附储氢量(质量百分数)可以达到和超过美国能源部提出的商业标准.并给出相应的理论解释.     

铬,银掺杂和铬氧共掺杂n型,p型氮化硼纳米管第一性原理研究

基于第一性原理的平面波超软赝势法对(6, 0)单壁氮化硼纳米管、Cr掺杂、Ag掺杂、以及Cr-O共掺纳米管进行电子结构和光学性质的计算.结果表明:Cr掺杂和Cr-O共掺体系相比于本征体系的带隙值均减小,掺杂体系的导带底穿过费米能级从而实现了氮化硼纳米管的n型掺杂. Ag掺杂实现了纳米管的p型掺杂.本征氮化硼纳米管、Ag掺杂、Cr掺杂、以及Cr-O共掺纳米管的静态介电常数分别为1.17、1.61、1.32和1.48,相对于本征体系静介电性能有所提高.     

单壁氮化硼纳米管的结构、对称性和晶格动力学

本文分析了氮化硼纳米管的结构对称性,并对其晶格振动模的对称性进行了分类。计算了单壁氮化硼纳米管的声子色散关系,给出了扶手椅管和锯齿管拉曼和红外活性模的频率随管径的变化规律。     

氮化硼、碳化硅、锗纳米管的熔化与拉伸力学特性

该论文采用Tersoff势的分子动力学方法分析了单壁(5,5)氮化硼、碳化硅、锗纳米管的熔化与轴向拉伸力学特性,讨论了三种纳米管熔化与轴向拉伸力学性能的差异.研究表明:氮化硼管熔化后呈现为网状,碳化硅管为疏松的不规则的团状,锗管呈现为紧密排布的近似球状;相同温度下,碳化硅及氮化硼纳米管的熔点、比热容以及熔化热却均远高于锗管,但系统能量却远低于锗管;三种纳米管中,氮化硼管的抗变形抗能力最大,锗管的抗变形与抗载荷能力最小,而氮化硼、碳化硅管的抗载荷能力相当.     

单壁氮化硼纳米管压缩特性的分子动力学模拟

采用分子动力学方法,分别模拟完好的和含有缺陷的(7,7)扶手椅型氮化硼纳米管的轴向压缩过程.原子间的相互作用采用Tersoff多体势函数来描述.为验证结果的可靠性,同时针对(7,7)扶手椅型碳纳米管进行对比计算.结果表明,氮化硼纳米管的压缩失效模式同碳纳米管相同,均表现为管壁的局部屈曲.发现纳米管的压缩强度,如临界轴向内力在低温下受温度影响明显,并且和应变率的大小有关.然而,应变率对纳米管的弹性变形没有影响.另外,还发现空位缺陷降低了纳米管的力学性能.与完好的纳米管相比,含有缺陷的纳米管轴向压缩强度对于温度的影响并不敏感.     

BN管状团簇到单壁纳米管的几何结构和电子性质

利用密度泛函理论(DFT),对氮化硼(BN)管状团簇的几何结构、稳定性和电子性质进行了研究.选取合适的BN结构单元作为结构生长基元,采用逐层生长的方式计算得到有限长度、不同截面尺寸的稳定管状团簇.结构中B-N交替排列,结构组成中的四元环和六元环数目均符合一般表达式.计算结果表明,通过适当组装管状团簇以及碳原子掺杂,可以制备出带隙可调的单壁氮化硼纳米管.     

高压对氮化硼纳米管的几何结构、电子结构和光学性质的影响

运用密度泛函理论平面波赝势方法(PWP)和广义梯度近似(GGA),计算研究了纳米管BN(5,5)在不同压力条件下的几何结构、电子结构和光学性质. 在高压条件下管口形状发生了较大的变化. 与闪锌矿结构BN比较分析发现两种结构间存在一些性质上的差异：首先,在外压力作用下,BN(5,5)纳米管的带隙随压力增大而减小,变化率为-0.01795eV/GPa,而闪锌矿结构BN随压力增大而增大;其次光吸收谱在压力条件下,没有和闪锌矿结构BN一样发生“蓝移”,相反在红外方向有所拓展;但纳米管BN(5,5)电子的转移方向和 关键词： 氮化硼纳米管 密度泛函理论(DFT) 电子结构     

铬银氧共掺n型，p型特性氮化硼纳米管第一性原理研究

基于第一性原理的平面波超软赝势法对(6, 0)单壁氮化硼纳米管、Cr掺杂、Ag掺杂、以及Cr-O共掺纳米管进行电子结构和光学性质的计算。结果表明：Cr掺杂和Cr-O共掺体系相比于本征体系的带隙值均减小,掺杂体系的导带底穿过费米能级从而实现了氮化硼纳米管的n型掺杂。Ag掺杂实现了纳米管的p型掺杂。本征氮化硼纳米管、Ag掺杂、Cr掺杂、以及Cr-O共掺纳米管的静态介电常数分别为1.17、1.61、1.32和1.48,相对于本征体系静介电性能有所提高。     

氮化硼、碳化硅、锗纳米管的熔化与拉伸力学特性

该论文采用Tersoff势的分子动力学方法分析了单壁(5,5)氮化硼、碳化硅、锗纳米管的熔化与轴向拉伸力学特性,讨论了三种纳米管熔化与轴向拉伸力学性能的差异。 研究表明：氮化硼管熔化后呈现为网状,碳化硅管为疏松的不规则的团状, 锗管呈现为紧密排布的近似球状;相同温度下,碳化硅及氮化硼纳米管的熔点、比热容以及熔化热却均远高于锗管,但系统能量却远低于锗管;三种纳米管中,氮化硼管的抗变形抗能力最大,锗管的抗变形与抗载荷能力最小,而氮化硼、碳化硅管的抗载荷能力相当。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.