Electrochemical resolution of 15 oxidation states for monolayer protected gold nanoparticles

The first observation of 15 voltammetric quantized charging peaks for a solution of hexanethiol-capped gold nanoparticles (so-called monolayer protected clusters MPCs) at room temperature is reported where the variation in peak spacing with increasing charge stored in the metal core is discussed in terms of MPC capacitance.     

Correlation between catalytic activity and surface ligands of monolayer protected gold nanoparticles

Gold nanoparticles (GNPs) are known to be a very good catalyst. Also, the anchoring of GNPs with stabilizing ligands is essential for surface modification, tuning of size and shapes, and to prevent from aggregation in suspension. But the effect of ligand on the catalytic property of ligand-capped GNP is yet to be explored in detail. In this paper, we perform an in-depth study of effect of ligands on the catalytic activity of monolayer protected GNPs. For this study, a series of different ligand functionalized GNPs in suspension as well as functionalized GNPs' thin film on glass substrate are prepared and used as catalysts in two model reactions, viz. borohydride reduction of 4-nitrophenol and redox reaction between potassium ferricyanide and sodium thiosulfate. The functionalization of GNPs with any ligand reduces its virgin catalytic activity, no matter whether the GNPs are suspended or supported as thin film. An increase in alkyl chain length of alkanethiols and alkylamines ligands and their graft density to the surface of GNP reduces its catalytic activity. Interestingly, the capping of GNPs with 11-mercaptoundecanoic acid and 11-mercaptoundecanol ligands completely destroys its catalytic activity. The effect of anchoring group of ligand molecules on the catalytic activity of ligand-protected GNPs is also discussed.     

Double hydrophilic block copolymer monolayer protected hybrid gold nanoparticles and their shell cross-linking

This paper describes the syntheses of core/shell gold nanoparticles stabilized with a monolayer of double hydrophilic block copolymer and their stimuli responsiveness before and after shell cross-linking. The hybrid nanoparticles consist of gold core, cross-linkable poly(2-(dimethylamino)ethyl methacrylate) (PDMA) inner shell, and poly(ethylene oxide) (PEO) corona. First, diblock copolymer PEO-b-PDMA was prepared via the reversible addition-fragmentation chain transfer (RAFT) technique using a PEO-based macroRAFT agent. The dithioester end group of PEO-b-PDMA diblock copolymer was reduced to a thiol end group. The obtained PEO-b-PDMA-SH was then used to prepare diblock copolymer stabilized gold nanoparticles by the "grafting-to" approach. 1,2-Bis(2-iodoethoxy)ethane (BIEE) was utilized to selectively cross-link the PDMA residues in the inner shell. The stimuli responsiveness and colloidal stability of core/shell gold nanoparticles before and after shell cross-linking were characterized by laser light scattering (LLS), UV-vis transmittance, and transmission electron microscopy (TEM). At pH 9, the average hydrodynamic radius Rh of non-cross-linked hybrid gold nanoparticles starts to increase above 35 degrees C due to the lower critical solution temperature (LCST) phase behavior of the PDMA blocks in the inner shell. In contrast, Rh of the shell cross-linked gold nanoparticles were essentially independent of temperature. Core/shell gold nanoparticles before and after shell cross-linking exhibit reversible swelling on varying the solution pH. Compared to non-cross-linked core/shell gold nanoparticles, shell cross-linking of the hybrid gold nanoparticles leads to permanent core/shell nanostructures with much higher colloidal stability and physically isolates the gold core from the external environment.     

Hexanethiolate monolayer protected 38 gold atom cluster

The nucleation-growth-passivation Brust reaction has been modified so as to enrich the product in useful quantities of a 38-atom gold nanoparticle coated with a hexanethiolate monolayer. Two modifications are described, using -78 degrees C reduction temperature and a hyperexcess of thiol. Compositional evidence is presented that establishes the product as a Au38(C6)24 hexanethiolate monolayer protected cluster (MPC), based on transmission electron microscopy, laser ionization-desorption mass spectrometry, thermogravimetric analysis, and elemental analysis. Reverse phase HPLC confirms the relatively good monodispersity of the MPC products, but high-resolution double-column HPLC reveals that the MPCs are a mixture of closely related but chromatographically distinct products. Voltammetry, low energy spectrophotometry, and spectroelectrochemistry reveal, respectively, a 1.6 eV electrochemical energy gap between the first oxidation and the first reduction, an optical HOMO-LUMO energy absorbance edge at 1.3 eV, and a bleaching of optical absorbance near the 1.3 eV band edge that accompanies electrochemical oxidation of the nanoparticle.     

Water-soluble gold nanoparticles protected by fluorinated amphiphilic thiolates

The preparation and the properties of gold nanoparticles (Au NPs) protected by perfluorinated amphiphiles are described. The thiols were devised to form a perfluorinated region close to the gold surface and to have a hydrophilic portion in contact with the bulk solvent to impart solubility in water. The monolayer protected clusters were prepared, in an homogeneous phase using sodium thiolates because of the low nucleophilicity of the alpha-perfluorinated thiols, and fully characterized with (1)H, (19)F NMR spectrometry, IR and UV-vis absorption spectroscopies, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). Au NPs with core diameters ranging from 1.6 to 2.9 nm, depending on the reaction conditions, were obtained. Water-soluble NPs (MPC-F8-PEGs) were obtained with the thiol HS-F8-PEG ending with a short poly(ethylene glycol) unit (PEG-OMe 550), whereas thiols with shorter PEG chains give rise to NPs insoluble in water. MPC-F8-PEGs undergo an exchange reaction with amphiphilic alkyl thiols. ESR investigations, using a hydrophobic radical probe, indicate that the MPC-F8-PEG monolayer shows a greater hydrophobicity compared to the analogous hydrogenated monolayer.     

Reductive desorption of thiolate from monolayer protected gold clusters

The "electrochemical potential window" of monolayer-protected gold cluster (MPC) nanoelectrodes is probed where the electrified liquid-liquid interface is used as the detector. The first observation of the reductive desorption of thiolate at negative MPC core charge is reported.     

Synthesis and catalytic properties of soluble platinum nanoparticles protected by a thiol monolayer

Several new platinum monolayer protected clusters (MPCs) have been synthesized and characterized. Two methods of platinum reduction were used depending on the solubility of the thiol: sodium borohydride for the water-soluble thiols and lithium triethylborohydride for the organic soluble thiols. In general, reactant solutions containing a 1:1 thiol/Pt ratio yielded the best particles in a single-phase reaction. Higher thiol/Pt ratios produced lower yields of MPCs, while much lower ratios produced gray-black precipitates. The Pt MPCs were used as catalysts to hydrogenate allyl alcohol to propanol by reducing the carbon-carbon double bond. The Pt-mercaptoammonium MPCs were also used as catalysts in the hydrogenation of maleic acid to succinic acid. Differences in the catalytic hydrogenation rates among the various monolayer coatings for MPCs are attributed to the variations in ligand chain length, branching, charged functional groups, packing density, and core size.     

Vibrational circular dichroism of N-acetyl-l-cysteine protected gold nanoparticles

Vibrational circular dichroism is used to determine the conformation of a thiol adsorbed on gold nanoparticles.     

Ethylene glycol monolayer protected nanoparticles for eliminating nonspecific binding with biological molecules

The usefulness of the hybrid materials of nanoparticles and biological molecules in many occasions depends on how well one can achieve a rational design based on specific binding and programmable assembly. Nonspecific binding between nanoparticles and biomolecules is one of the major barriers for achieving its utilities in a biological system. In this paper, we demonstrate a new approach to eliminate nonspecific interactions between nanoparticles and proteins by synthesizing ethylene glycol protected gold nanoparticles. We discovered that with the water content optimized in the range of 9-18% in the reaction mixture, di-, tri-, and tetra(ethylene glycol) protected gold nanoparticles Au-S-EGn (n = 2, 3, and 4) could be directly synthesized. These gold nanoparticles that are bonded with a uniform monolayer with defined length varying from 0.8 to 1.6 nm (from molecular modeling) have great stability in aqueous solutions with a high concentration of electrolyte and organic solutions. Using ion-exchange chromatography and gel electrophoresis, we demonstrated that these Au-S-EGn (n = 2, 3, or 4) nanoparticles have complete resistance to protein nonspecific interactions. These types of nanoparticles provide a fundamental starting material for designing hybrid materials composed of metallic nanoparticles and biomolecules.     

Structural and theoretical basis for ligand exchange on thiolate monolayer protected gold nanoclusters

Ligand exchange reactions are widely used for imparting new functionality on or integrating nanoparticles into devices. Thiolate-for-thiolate ligand exchange in monolayer protected gold nanoclusters has been used for over a decade; however, a firm structural basis of this reaction has been lacking. Herein, we present the first single-crystal X-ray structure of a partially exchanged Au(102)(p-MBA)(40)(p-BBT)(4) (p-MBA = para-mercaptobenzoic acid, p-BBT = para-bromobenzene thiol) with p-BBT as the incoming ligand. The crystal structure shows that 2 of the 22 symmetry-unique p-MBA ligand sites are partially exchanged to p-BBT under the initial fast kinetics in a 5 min timescale exchange reaction. Each of these ligand-binding sites is bonded to a different solvent-exposed Au atom, suggesting an associative mechanism for the initial ligand exchange. Density functional theory calculations modeling both thiol and thiolate incoming ligands postulate a mechanistic pathway for thiol-based ligand exchange. The discrete modification of a small set of ligand binding sites suggests Au(102)(p-MBA)(44) as a powerful platform for surface chemical engineering.     

Preparation temperature dependence of size and polydispersity of alkylthiol monolayer protected gold clusters

The influence of preparation temperature on the size and size distribution of dodecylthiol monolayer protected gold clusters was studied. The monolayer protected clusters (MPCs) were synthesized by two different variations of the Brust-Schiffrin procedure. In all of the experiments, the stoichiometry of the reactants dodecylthiol, HAuCl(4), and sodium borohydride was kept constant, while the temperature was varied in the range of -18 to +90 degrees C. Two series were performed in which an aqueous solution of NaBH(4) was either added over 30 s or all in one portion. The size and size distribution of the MPCs were determined by small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). It has been demonstrated that in general the MPC size increases with elevated preparation temperatures.     

Optical properties of thermally responsive amphiphilic gold nanoparticles protected with polymers

Amphiphilic thermally responsive gold nanoparticles have been prepared by protecting the particles with both polystyrene, PS, and poly(N-isopropylacrylamide), PNIPAM, chains. Particles form a monolayer on a water surface in a Langmuir trough, and according to in situ spectroscopic measurements, the surface plasmon resonance, SPR, band undergoes a blue-shift during the monolayer compression. The compression-induced blue-shift is related to a change in the conformation of tethered PNIPAM chains; the phenomenon is discussed on the basis of Mie-Drude theory. In contrast, a red-shift in the SPR of the multilayers of the same nanoparticles transferred at different temperatures has been observed with increasing the deposition cycle, attributed to the presence of a weak interparticle coupling in the multilayer.     

Theoretical study of sulfur L-edge XANES of thiol protected gold nanoparticles

The Scalar Relativistic-Zero Order Regular Approximation-Time Dependent Density Functional Theory has been employed to study the sulfur L-edge XANES spectrum of the [Au(25)(SCH(3))(18)](+) model cluster, with the aim to reproduce and rationalize previous experimental data. The salient experimental features are properly described by the present calculation. The model cluster contains two different types of bidentate "staple" ligand thiol fragments, and it has been possible to assign the spectral features according to the different location of the initial core orbital on one of the two different fragments. This finding suggests that in the real nanoparticle two different non-equivalent type of sulfur bidentate ligands are present, arranged with the typical staple geometry.     

Aggregation behavior of pH- and thermo-responsive block copolymer protected gold nanoparticles

Two distinctive block copolymers protected gold nanoparticles (AuNPs) were prepared with poly(methylacrylic acid)-block-poly(N-isopropylacrylamide) (SH-PMAA₆₄-b-PNIPAM₃₅) and poly (N-isopropylacrylamide)-block-poly(methylacrylic acid) (SH-PNIPAM₄₀-b- PMAA₆₀) through strong gold-sulfur bonding. The hybrid NPs have a pH-responsive inner shell (or corona) and a thermo-responsive corona (or inner shell) due to different location relations of the PNIPAM and PMAA on the surface of AuNPs. Then, the aggregation behaviors, as well as the changes of optical properties, of two hybrid NPs were compared in response to both stimuli. The results showed the obvious inter-particle aggregation caused by the phase transition for hydrophobic coronal polymer. However, the particles of hydrophilic corona layer retained good dispersion and the pH-responsive or thermo-responsive characteristics of shell layer made relatively minor changes.     

Thioalkylated tetraethylene glycol: a new ligand for water soluble monolayer protected gold clusters

Ligand-stabilised, water-soluble gold nanoparticles of two different size ranges (2-4 and 5-8 nm) are readily prepared using monohydroxy (1-mercaptoundec-11-yl) tetraethylene glycol as a novel capping agent. These nanoparticles are as stable as alkylthiol-capped monolayer protected clusters (MPCs) and do not aggregate from aqueous solution under a wide range of stringent conditions. It is expected that this new material will be useful for a number of bio-analytical applications.     

Mixed monolayer coverage on gold nanoparticles for interfacial stabilization of immiscible fluids

Gold nanoparticles covered with a mixed monolayer of n-dodecanethiol and 11-mercapto-1-undecanol were prepared and found to mediate the oil-water interface, providing access to stable water droplets in oil.     

One pot synthesis of polymer protected gold nanoparticles and nanoprisms in glycerol

Uniform and stable polymer protected spherical gold nanoparticles were synthesized using glycerol as reducing agent. Further it was observed that the morphology of the particles varied from spherical to triangular prismatic gold nanoparticles when the reaction was changed from normal mode of reflux condition to microwave mode (MW) of heating. Further a brief mechanism relating the formation of prisms with the orientation of polymer and nucleation period has been discussed. Formation of triangular prismatic and spherical gold nanoparticles were characterised using UV–vis spectroscopy, transmission electron microscopy (TEM) and X-ray diffraction (XRD) analysis.     

Controlled growth and catalytic activity of gold monolayer protected clusters in presence of borohydride salts

In the presence of large excesses of borohydride salts, gold monolayer protected-clusters can be grown to larger sizes simply by controlling the amount of reducing agent added to smaller clusters. In addition, gold monolayer clusters can be used as catalysts for reduction reactions by sodium borohydride; results suggest such catalysts have sterically constrained active sites.     

Ethylene glycol monolayer protected nanoparticles: synthesis, characterization, and interactions with biological molecules

The usefulness of the hybrid materials of nanoparticles and biological molecules on many occasions depends on how well one can achieve a rational design based on specific binding and programmable assembly. Nonspecific binding between nanoparticles and biomolecules is one of the major barriers for achieving their utilities in a biological system. In this paper, we demonstrate a new approach to eliminate nonspecific interactions between nanoparticles and biological molecules by shielding the nanoparticle with a monolayer of ethylene glycol. A direct synthesis of di-, tri-, and tetra(ethylene glycol)-protected gold nanoparticles (Au-S-EGn, n = 2, 3, and 4) was achieved under the condition that the water content was optimized in the range of 9-18% in the reaction mixture. With controlled ratio of [HAuCl4]/[EGn-SH] at 2, the synthesized particles have an average diameter of 3.5 nm and a surface plasma resonance band around 510 nm. Their surface structures were confirmed by 1H NMR spectra. These gold nanoparticles are bonded with a uniform monolayer with defined lengths of 0.8, 1.2, and 1.6 nm for Au-S-EG2, Au-S-EG3, and Au-S-EG4, respectively. They have great stabilities in aqueous solutions with a high concentration of electrolytes as well as in organic solvents. Thermogravimetric analysis revealed that the ethylene glycol monolayer coating is ca. 14% of the total nanoparticle weight. Biological binding tests by using ion-exchange chromatography and gel electrophoresis demonstrated that these Au-S-EGn (n = 2, 3, or 4) nanoparticles are free of any nonspecific bindings with various proteins, DNA, and RNA. These types of nanoparticles provide a fundamental starting material for designing hybrid materials composed of metallic nanoparticles and biomolecules.