Unsymmetrical zinc phthalocyanines containing thiophene and amine groups as donor for bulk heterojunction solar cells

Photovoltaic technology is an alternative resource for renewable and sustainable energy and low costs organic photovoltaic devices such as bulk-heterojunction (BHJ) solar cells, which are selective candidates for the effective conversion of solar energy into electricity. Asymmetric phthalocyanines containing electron acceptor and donor groups create high photovoltaic conversion efficiency in dye sensitized solar cells. In this study, a new unsymmetrical zinc phthalocyanine was designed and synthesized including thiophene and amine groups at peripherally positions for BHJ solar cell. The structure of the targeted compound (4) was characterized comprehensively by FT-IR, UV–Vis, ¹H-NMR, and MALDI-TOF MS spectroscopies. The potential of this compound in bulk heterojunction (BHJ) photovoltaic devices as donor was also researched as function of blend ratio (blend ratio was varied from 0.5 to 4). For this purpose, a series of BHJ devices with the structure of fluorine doped indium tin oxide (FTO)/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)/ ZnPc:[6,6]- phenyl-C61- butyric acid methyl ester (PCBM) blend/Al with identical thickness of ZnPc:PCBM layer were fabricated and characterized. Photo current measurements in 4 revealed that the observed photo current maximum is consistent with UV-vis spectra of the compound of 4. Preliminary studies showed that the blend ratio has a critical effect on the BHJ device performance parameters. Photovoltaic conversion efficiency of 6.14% was achieved with 4 based BHJ device.     

Acene-Modified Small-Molecule Donors for Organic Photovoltaics

A series of acene-modified small molecules have been designed and synthesized, and their photovoltaic characteristics were studied by using the small molecules in organic photovoltaics (OPVs). Different cores were introduced to modulate the conjugation lengths of the small molecules and the bulk heterojunction (BHJ) morphologies. Three small-molecule donors were prepared, namely Ph-TTR, Na-TTR, and An-TTR, which have phenyl, naphthalene, and anthracene moieties, respectively, as conjugated cores. These donors were synthesized in a few steps and exhibited favorable BHJ morphologies, thereby giving promising power conversion efficiencies (PCEs). The donors showed excellent miscibility with the acceptor PC₇₁BM, and the use of the additive 1,8-diiodooctane (DIO) led to a remarkable increase in crystallinity, thereby increasing the PCEs of their OPVs. Of the three donors, Na-TTR showed the most efficient charge carrier generation and favorable molecular packing structures; hence, of the three types of devices tested, the Na-TTR:PC₇₁BM devices exhibited the highest PCE, specifically 6.27 %, without pre- or post-treatments. The promising PCEs achieved from these easily synthesized acene-modified small molecules suggested that acene-modified small molecules can be useful materials in OPVs.     

Heavy metal complex containing organic/polymer materials for bulk-heterojunction photovoltaic devices

The application of heavy-metal complexes in bulk-heterojunction (BHJ) solar cells is a promising new research field which has attracted increasing attention, due to their strong spin-orbit coupling for efficient singlet to triplet intersystem crossing. This review article focuses on recent advances of heavy metal complex containing organic and polymer materials as photovoltaic donors in BHJ solar cells. Platinum-acetylide containing oligomersor and polymers have been firstly illustrated due to the good solubility, square planar structure, as well as the fairly strong Pt-Pt interaction. Then the cyclometalated Pt or Ir complex containing conjugated oligomers and polymers are presented in which the triplet organometallic compounds are embedded into the organic/polymer backbone either through cyclometalated main ligand or the auxiliary ligand. Pure triplet small molecular cyclometalated Ir complex are also briefly introduced. Besides the chemical modification, physical doping of cyclometalated heavy metal complexes as additives into the photovoltaic active layers is finally demonstrated.     

Performance enhancement in organic solar cells and photodetectors enabled by donor phase optimization at the surface of hole transport layer

The domain purity, material crystallinity and distribution at the interface between the active layer and the transport layer have an important impact on the performance of organic solar cells (OSCs) and organic photodetectors (OPDs), while this focal issue has received less attention in previous studies. From this perspective, a new method to simultaneously enhance the performance of OSC and OPD is proposed, namely, using a sequential deposition method to first construct a compact stacking structure of dual-donor (D18-Cl:PTO2) eutectic in the donor layer, and then induce the ordered deposition of the acceptor (Y6). Compared with the conventional bulk heterojunction (BHJ), the active layer realized by this method not only improves the crystallinity and stacking order of the constituent material on the surface of the transport layer, but also regulates a good vertical distribution, which is conducive to improving the charge transport and extraction efficiency, reducing the leakage current, and enhancing the stability of the device. As a result, the OSC device based on the D18-Cl:PTO2/Y6 structure achieves a power conversion efficiency of up to 17.65% and good light-degradation stability, which is much better than that of BHJ-based OSC (PCE of 16.37%). For the OPD, the dark current at reverse bias is reduced by more than an order of magnitude, and the maximum responsivity is improved to 0.52 A/W through the optimization of the donor phase at the interface. Moreover, the strategy does not require additional post-processing compared to the BHJ preparation, which reduces the device construction cost and process complexity, providing an effective way for developing high-performance organic optoelectronic devices.     

Fluorenyl hexa-peri-hexabenzocoronene-dendritic oligothiophene hybrid materials: synthesis, photophysical properties, self-association behaviour and device performance

Apart from molecular properties, intermolecular forces play a vital role in defining the performance of organic electronic devices. This is particularly relevant in bulk heterojunction (BHJ) solar cells in which the arrangement of electron-donor and -acceptor materials into distinct crystalline phases of ideal size and distribution can lead to better power conversion efficiencies. In this study, a series of fluorenyl hexa-peri-hexabenzocoronenes (FHBC) decorated with thiophene dendrons (DOT) of variable size was obtained by using a convergent synthetic approach. With such variety of molecular sizes and shapes in hand, the objective of this study is to highlight the relationships between molecular properties, bulk properties and device performance. Correlations between π-π stacking ability and dendrimer generation were established from self-organisation studies in solution and solid state. The synergistic combination of molecular organisation at the nanoscale and photophysical characteristics derived from the FHBC and DOT moieties leads to a notable improvement of the photovoltaic performance.     

Impact of regio-isomeric monochlorinated end groups on packing mode,miscibility, and photovoltaic performance of asymmetric selenophene-fused M-series acceptors

Optimal bulk-heterojunction (BHJ) morphology is crucial for efficient charge transport and good photovoltaic performance in organic solar cells (OSCs). Yet, the correlation between chemical structures of nonfullerene acceptors (NFAs) and molecular interaction in the BHJ blends remains opaque. Herein, we study three isomeric NFAs referred to as MQ1-x (x = β, γ, or δ) that shared an asymmetric selenophene-fused heteroheptacene backbone end-capped by two monochlorinated end groups. Remarkably, miscibility between the polymer donor of PM6 and MQ1-x successively elevates as the chlorine atoms move from β-, to γ-, to δ-position of terminals. Combined with the varied molecular crystallinity of these NFAs, diverse BHJ morphologies are observed in their blend films. As a result, the MQ1-δ-based devices present the highest PCE of 12.08% owing to the efficient charge dissociation and transport induced by the compact molecular packing and optimal BHJ morphology. Our investigation provides a new insight in the material design that has a good balance in molecular packing and film morphology for high-performance OSCs.     

Influence of donor:acceptor ratio on charge transfer dynamics in non-fullerene organic bulk heterojunctions

The donor:acceptor(D:A) blend ratio plays a very important role in affecting the progress of charge transfer and energy transfer in bulk heterojunction(BHJ) orga nic solar cells(OSCs).The proper D:A blend ratio can provide maximized D/A interfacial area for exciton dissociation and appro p riate domain size of the exciton diffusion length,which is beneficial to obtain high-performance OSCs.Here,we comprehensively investigated the relationship between various D:A blend ratios and the charge transfer and energy transfer mechanisms in OSCs based on PBDB-T and non-fullerene acceptor IT-M.Based on various D:A blend ratios,it was found that the ratio of components is a key factor to suppress the formation of triplet states and recombination energy losses.Rational D:A blend ratios can provide appropriate donor/accepter surface for charge transfer which has been powerfully verified by various detailed experimental results from the time-resolved fluorescence measurement and transient absorption(TA) spectroscopy.Optimized coherence length and crystallinity are verified by grazing incident wide-angle X-ray scattering(GIWAXS) measurements.The results are bene ficial to comprehend the effects of various D:A blend ratios on charge transfer and energy transfer dynamics and provides constructive suggestions for rationally designing new materials and feedback for photovoltaic performance optimization in non-fullerene OSCs.     

Improved Energy Conversion Efficiency of ZnO/Polythiophene Solar Cell in Ga-Doped ZnO Nanorod Array Photoanode

We reported the fabrication and doping effect of Ga-doped ZnO nanorods/electropolymerized polythio-phene(e-PT) hybrid photovoltaic(h-PV) devices. Ga-Doped ZnO nanorod array photoanode devices were fabricated via hydrothermally growing nanorods on sol-gel spin-coating ZnO seed layer, and then the nanorod array was immersed into a thiophene solution to yield a thin polythiophene film by electrochemically polymerization. Afterwards, a thin layer of Al was deposited on the surface of polythiophene to make an electrode for photovoltaic measurement. The ZnO nanorods with different Ga-doping contents were characterized by means of X-ray diffraction(XRD), scanning electron micrograph(SEM) and X-ray photoelectron spectroscopy(XPS). Photovoltaic J-V characterization was performed on the e-PT/ZnO bilayer and bulk heterojunction(BHJ) devices. Though the unsubstituted polythiophene is not an ideal polymer material for solar cells with high power conversion efficiency, it is a sound model for the study on the effect of dopant in hybrid materials. The results indicate that doping Ga can substantially improve the power conversion efficiency of the ZnO-polythiophene solar cell.     

Tuning photovoltaic performance of 9,9‐dioctylfluorene‐alt‐5,7‐bis(thiophen‐2‐yl)‐2,3‐biphenylthieno[3,4‐b]pyrazine copolymeric derivatives by attaching additional donor units in pendant phenyl ring

A class of the 9,9‐dioctylfluorene‐alt‐5,7‐bis(thiophen‐2‐yl)‐2,3‐biphenylthieno [3,4‐b]pyrazine copolymeric derivatives (PFO‐3ThPz‐D) attaching additional donor (D) units in the pendant phenyl ring with a D‐A D structure was synthesized and investigated, where the additional D unit is a substituent group of fluorene, carbazole, and triphenylamine (Tpa). Their photovoltaic properties were significantly tuned by these pending donor units. Among these copolymers, the PFO‐3ThPz‐Tpa exhibited the best photovoltaic properties in the bulk heterojunction polymeric solar cells (BHJ‐PSC). The maximum power conversion efficiency (PCE) of 2.09% and the highest circuit current density (J_sc) of 7.91 mA/cm² were obtained in the cell using a blend of PFO‐3ThPz‐Tpa and PC₆₀BM (1:3, w/w) as active layer, which are 2.5 and 1.8 times higher than those corresponding levels in the other cell using the parent PFO‐3ThPz‐Ph copolymer instead of PFO‐3ThPz‐Tpa as donor, respectively. While PC₆₀BM was replaced by PC₇₀BM, the PFO‐3ThPz‐Tpa‐based BHJ‐PSC exhibited better photovoltaic properties with PCE of 3.08% and J_sc of 10.3 mA/cm². This work demonstrated that attaching donor units into the D‐A‐based copolymeric side‐chain is a simple and effective method to improve the photovoltaic properties for the resulting copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

In situ current voltage measurements for optimization of a novel fullerene acceptor in bulk heterojunction photovoltaics

The evaluation of the power conversion efficiency (PCE) of new materials for organic bulk heterojunction (BHJ) photovoltaics is difficult due to the large number of processing parameters possible. An efficient procedure to determine the optimum conditions for thermal treatment of polymer‐based bulk heterojunction photovoltaic devices using in situ current‐voltage measurements is presented. The performance of a new fullerene derivative, 1,9‐dihydro‐64,65‐dihexyloxy‐1,9‐(methano[1,2] benzomethano)fullerene[60], in BHJ photovolatics with poly(3‐hexylthiophene) (P3HT) was evaluated using this methodology. The device characteristics of BHJs obtained from the in situ method were found to be in good agreement with those from BHJs annealed using a conventional process. This fullerene has similar performance to 1‐(3‐methoxycarbonyl)propyl‐1‐phenyl‐[6,6]‐methano fullerene in BHJs with P3HT after thermal annealing. For devices with thickness of 70 nm, the short circuit current was 6.24 mA/cm² with a fill factor of 0.53 and open circuit voltage of 0.65 V. The changes in the current‐voltage measurements during thermal annealing suggest that the ordering process in P3HT dominates the improvement in power conversion efficiency. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Platinum(II)-bis(aryleneethynylene) complexes for solution-processible molecular bulk heterojunction solar cells

Four new solution-processible small-molecular platinum(II)-bis(aryleneethynylene) complexes consisting of benzothiadiazole as the electron acceptor and triphenylamine and/or thiophene as the electron donor were conveniently synthesized and characterized by physicochemical and computational methods, and utilized as the electron-donor materials in the fabrication of solution-processed bulk heterojunction (BHJ) solar cells. The effect of different electron-donor groups in these small molecules on the optoelectronic and photovoltaic properties was also examined. The optical and time-dependent density functional theory studies showed that the incorporation of stronger electron-donor groups significantly enhanced the solar-absorption abilities of the complexes. These molecular complexes can serve as good electron donors for fabricating BHJ devices by blending them with the [6,6]-phenyl-C(71)-butyric acid methyl ester (PC(70)BM) as the electron acceptor. The best power conversion efficiency of 2.37% was achieved with the open-circuit voltage of 0.83 V, short-circuit current density of 7.10 mA cm(-2) and fill factor of 0.40 under illumination of an AM 1.5 solar-cell simulator. The spin-coated thin films showed p-channel field-effect charge transport with hole mobilities of up to 2.4×10(-4) cm(2) V(-1) s(-1) for these molecules. The present work illuminates the potential of well-defined organometallic complexes in developing light-harvesting small molecules for efficient power generation in organic photovoltaics implementation.     

基于不同功能的苯并噻二唑为受体单元和低聚噻吩为给体单元的D-A-D-A-D型有机小分子光伏材料的理论计算研究

设计了四个以四联噻吩为中心给电子单元,联二噻吩为末端给电子单元,不同功能的苯并噻二唑(DOBT,BT,FBT和FFBT)为吸电子单元的有机小分子太阳能电池给体材料,分别称为DOBT-8T,BT-8T,FBT-8T和FFBT-8T.在B3LYP/6-31G(d)基组的水平上利用密度泛函和含时密度泛函理论对四个小分子进行了理论计算.详细分析了吸电子单元苯并噻二唑的结构修饰对小分子给体材料性能的影响.理论计算结果显示,不同功能的苯并噻二唑单元的引入对小分子给体材料的几何结构、禁带宽度、HOMO与LUMO能级、轨道电子密度分配、能量驱动力、开路电压和分子中的原子电荷(NPA)都有重要调节作用.相比于其它分子,以FBT为吸电子单元的FBT-8T,显示了最窄的带隙和较低的HOMO能级值.以FFBT为吸电子单元的FFBT-8T,获得了最低的HOMO能级和较为合适的禁带宽度.利用Scharber模型分别计算了基于小分子/PC61BM为活性层的光伏器件的能量转换效率(PCE),基于FBT-8T/PC61BM和FFBT-8T/PC61BM的光伏器件,将获得的PCE分别高达约4.7%和5.2%.在以上研究的基础上,推测FBT-8T和FFBT-8T是潜在的高性能的有机小分子体异质结光伏给体材料.     

Effects of various donor: acceptor blend ratios on photophysical properties in non-fullerene organic bulk heterojunctions

In this work, the donor:acceptor ratio effected photophysical properties of non-fullerene organic solar cells are comparatively investigated. Effective transportation of the photo-generated charge carriers can be obtained with the PDBD-T:ITIC ratio variation. There is no significant energy loss variation exists in the process of changing the D:A ratio.     

Photocurrent hysteresis related to ion motion in metal-organic perovskites

Perovskite solar cells have attracted considerable attention in the photovoltaic field for their high efficiency achieved in a short period of time.However,hystersis behaviour was often observed during the photocurrent-voltage measurement causes uncertainty in evaluation of photovoltaic efficiency.In this letter,we report a systematic investigation on the cause of hysteresis via series of TiO_2 based planar heterojunction structured perovskite solar cell devices.The results reveal organic cation ions,such as the commonly employed CH_3NH_3~+ or HC(NH_2)_2~+,play critical role on the observed hysteresis effect above the 298 K via interaction with iodide.We further suggest an efficient hole/electron transport in devices can inhibit such hysteresis behavior.Our conclusion sheds light onto the underlying hysteresis mechanisms,and proposes possible solutions to overcome the issue,which offers guidelines for future development of perovskite devices.     

Optimal bulk-heterojunction morphology enabled by fibril network strategy for high-performance organic solar cells

A bicontinuous network formed spontaneously upon film preparation is highly desirable for bulk-heterojunction(BHJ) organic solar cells(OSCs). Many donor-acceptor(D-A) type conjugated polymers can self-assemble into polymer fibrils in the solid state and such fibril-assembly can construct the morphological framework by forming a network structure, inducing the formation of ideal BHJ morphology. Our recent works have revealed that the fibril network strategy(FNS) can control the blend morphology in fullerene, non-fullerene and ternary OSCs. It has been shown that the formation of fibril network can optimize phase separation scale and ensure efficient exciton dissociation and charge carriers transport, thus leading to impressive power conversion efficiencies(PCEs) and high fill factor(FF) values. We believe that FNS will provide a promising approach for the optimization of active layer morphology and the improvement of photovoltaic performance, and further promote the commercialization of OSCs.     

Benzo[2,1‐b;3,4‐b′]dithiophene‐based low‐bandgap polymers for photovoltaic applications

The synthesis of four alternating copolymers using benzo[2,1‐b;3,4‐b′]dithiophene (BDP) as the common donor unit is presented. Before the synthesis, theoretical calculations that we performed predicted that the incorporation of BDP, which consists of fused dithiophene units with a benzene ring, into these polymers would produce a low‐lying highest occupied molecular orbital (HOMO) energy level. Low‐lying HOMO levels are desirable to produce high open circuit voltages (V_OC) in organic bulk heterojunction (BHJ) photovoltaic devices. The polymers' structural characterization, as well as the preliminary results of their performance in BHJ devices, using (6,6)‐phenyl C₆₁‐butyric acid methyl ester as the electron acceptor, is presented. The V_OC values follow the expected trend: increasing with decreasing HOMO level of the polymer. High V_OC values of 0.81 and 0.82 V have been obtained from two polymers: PBDPBT and PBDPDPP. The initial power conversion efficiency achieved in these unoptimized devices was 1.11% because of relatively low J_SC values. The variation observed in the J_SC values between the four polymers is discussed. Device performance is expected to increase with optimization of processing conditions for the devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Small compounds based on 2,7-silafluorene and 4,7-di (2′-thienyl) for heterojunction organic solar cells: DFT study

To understand the effect of the substitution by several strong electron-withdrawing groups ([1,2,5]thiadiazolo[3,4-g]quinoxaline; benzo[c][1,2,5]thiadiazole and quinoxaline) and end-capped donor groups (thiophene and phenyl) on the structural and optoelectronic properties of six conjugated compounds C1–C6 based on 2,7-silafluorene and 4,7-di (2′-thienyl) used for organic solar cells application such as bulk heterojunction (BHJ) solar cell. We have done a theoretical study to calculate and predict these properties. The electronic structures and optical absorption spectra of donors were calculated using density functional theory, and the Zerner’s intermediate neglect of differential overlap functional theory level is employed to investigate the excited singlet states, respectively, and to shed light on how the substitution and the pi-conjugation order influence the performance of these compounds in the BHJ cell. Moreover, the theoretical results including optoelectronic and photovoltaic properties of the compound C1 are in good agreement with the available experimental data extracted from bibliography. The calculated results of these molecules reveal that the compounds C3 and C6, with the [1,2,5]thiadiazolo[3,4-g]quinoxaline as electron acceptor seem to be good candidates materials for photovoltaic applications due to their best optoelectronic and photovoltaic properties.     

Organic photovoltaic devices with colloidal TiO2 nanorods as key functional components

We report on a novel approach to integrate colloidal anatase TiO(2) nanorods as key functional components into polymer bulk heterojunction (BHJ) photovoltaic devices by means of mild, all-solution-based processing techniques. The successful integration of colloidal nanoparticles in organic solar cells relies on the ability to remove the long chain insulating ligands, which indeed severely reduces the charge transport. To this aim we have exploited the concomitant mechanisms of UV-light-driven photocatalytic removal of adsorbed capping ligands and hydrophilicization of TiO(2) surfaces in both solid-state and liquid-phase conditions. We have demonstrated the successful integration of the UV-irradiated films and colloidal solutions of TiO(2) nanorods in inverted and conventional solar cell geometries, respectively. The inverted devices show a power conversion efficiency of 2.3% that is a ca. three times improvement over their corresponding cell counterparts incorporating untreated TiO(2), demonstrating the excellent electron-collecting property of the UV-irradiated TiO(2) films. The integration of UV-treated TiO(2) solutions in conventional devices results in doubled power conversion efficiency for the thinner active layer and in maximum power conversion efficiency of 2.8% for 110 nm thick devices. In addition, we have demonstrated, with the support of device characterizations and optical simulations, that the TiO(2) nanocrystal buffer layer acts both as electron-transporting/hole-blocking material and optical spacer.     

有机太阳能电池中基于苝二酰亚胺结构小分子受体进展

最近几年,有机太阳能电池中的非富勒烯小分子受体研究引起了人们的兴趣。其中,苝二酰亚胺(PDI)类分子因具有良好的电子传输能力,较强的电子亲和力,稳定的光、热、化学性能以及化学结构的可设计性带来的性能可调控性而得到广泛的关注。本文总结了近三年来在体异质结有机太阳能电池应用方面PDI小分子受体的研究进展,重点关注了PDI分子结构对其性能的影响,希望为以后PDI类受体分子的设计思路起到一定的启发作用。     

Thieno[3,2‐b]thiophene‐substituted benzodithiophene in donor–acceptor type semiconducting copolymers: A feasible approach to improve performances of organic photovoltaic cells

Thieno[3,2‐b]thiophene‐substituted benzo[1,2‐b:4,5‐b′]dithiophene donor units (TTBDT) serve as novel promising building blocks for donor–acceptor (D‐A) copolymers in organic photovoltaic cells. In this study, a new D‐A type copolymer (PTTBDT‐TPD) consisting of TTBDT and thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) is synthesized by Stille coupling polymerization. A PTTBDT‐TPD analog consisting of TTBDT and alkylthienyl‐substituted BDT (PTBDT‐TPD) is also synthesized to compare the optical, electrochemical, morphological, and photovoltaic properties of the polymers. Bulk heterojunction photovoltaic devices are fabricated using the polymers as p‐type donors and [6,6]‐phenyl C₇₁‐butyric acid methyl ester (PC₇₁BM) as the n‐type acceptor. The power conversion efficiencies of the devices fabricated using PTTBDT‐TPD and PTBDT‐TPD are 6.03 and 5.44%, respectively. The difference in efficiency is attributed to the broad UV–visible absorption and high crystallinity of PTTBDT‐TPD. The replacement of the alkylthienyl moiety with thieno[3,2‐b]thiophene on BDT can yield broad UV–visible absorption due to extended π‐conjugation, and enhanced molecular ordering and orientation for organic photovoltaic cells. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3608–3616