L-半胱氨酸修饰金电极对邻苯二酚和对苯二酚的电催化及分析应用

研究了 L-半胱氨酸自组装膜修饰金电极的电化学行为, 发现其对邻苯二酚和对苯二酚的电化学氧化具有明显的电催化作用, 使它们的氧化电位降低, 峰电流显著增大 ; 初步探讨了电催化机理 ; 将该膜电极用于对苯二酚的定量测定, 发现其氧化峰电流与对苯二酚浓度在 1.0× 10-4～ 3.0× 10-2 mol@ L-1范围内成良好的线性关系, 相关系数 0.997 4, 检出限为 2.0× 10-5 mol@ L-1; 用于照相显影液中对苯二酚的测定, 获得满意结果 .     

巯基取代噻二唑自组装铂电极测定对苯二酚

用自己合成的巯基取代噻二唑试剂对铂电极进行了首次自组装,用电化学方法研究了该电极的电化学性质.研究了对苯二酚在该电极上的电化学行为.实验结果表明,在0.1mol/LKCl溶液中,对苯二酚表现出一种准可逆行为,峰电流对称且峰电位差为80mV,峰电位较之裸铂电极上有较大的降低,峰电流较裸电极大大提高.利用该电极DPV法进行了对苯二酚的电化学测定,峰电流对其浓度在1×10-7~5×10-4mol/L之间成良好的线性关系,检出限为4×10-8mol/L.对对苯二酚模拟品进行了测定,回收率在96.6%-99.6%之间.     

聚吖啶橙修饰电极上多巴胺的电化学行为及其伏安法检测

在玻碳电极上用电化学方法制备了聚吖啶橙修饰膜电极并研究了此电极上多巴胺的电化学行为及其检测。多巴胺在聚吖啶橙修饰电极上于0.50V和0.47V处出现一对灵敏、可逆的氧化还原峰。在最佳测试条件下,氧化峰电流与多巴胺浓度在2.8×10-7～5.3×10-3mol·L-1范围内呈良好的线性关系。0V处闭路富集150s,检出限为7.0×10-9mol·L-1,用于多巴胺针剂含量的测定,结果满意。     

介孔炭修饰玻碳电极循环伏安法测定对苯二酚

将介孔炭分散在5g.L-1壳聚糖溶液中并滴涂在玻碳电极表面,烘箱烘干后,制备了介孔炭修饰电极。采用循环伏安法研究了对苯二酚在修饰电极上的电化学行为。结果表明:对苯二酚在该修饰电极上出现了一对灵敏的氧化还原峰,其峰电流比裸玻碳电极增大了很多,据此提出了用循环伏安法测定对苯二酚的方法。对苯二酚的浓度在1.0×10-6～1.0×10-4 mol.L-1范围内与其氧化峰电流呈线性关系,检出限(3S/N)为4.0×10-7 mol.L-1。修饰电极用于模拟水样中对苯二酚的测定,回收率在95.3%～98.7%之间,测定值的相对标准偏差(n=5)在3.8%～4.2%之间。     

过氧化聚吡咯膜修饰电极检测肾上腺素研究

报道了肾上腺素(EP)在过氧化聚吡咯膜(OPPy)修饰电极上的电化学行为及其测定方法。过氧化聚吡咯膜(OPPy)修饰电极对EP的氧化还原具有良好的催化作用,并具有较高的选择性。在最佳实验条件下,EP的还原峰电流与其浓度在2×10-7~5×10-4mol.L-1范围内呈良好的线性关系,相关系数为0.999 9,检出限为8×10-8mol.L-1。将该电极应用于EP实际样品的测定,效果良好。     

聚L-半胱氨酸/多壁碳纳米管复合修饰电极同时测定邻苯二酚和对苯二酚

将羧基化多壁碳纳米管分散在L-半胱氨酸溶液中并滴涂在玻碳电极表面.将上述电极在pH 6.9的B-R缓冲溶液中,于-1.0～2.5 V的电位范围内进行电聚合,制备了聚L-半胱氨酸/多壁碳纳米管复合修饰电极(Pol-L-Cys/MWCNTs/GCE).研究发现,邻苯二酚和对苯二酚在聚L-半胱氨酸/多壁碳纳米管复合修饰电极上分别出现了一对氧化还原峰,且两者的氧化峰电位差达101 mV,提出了用微分脉冲伏安法同时测定邻苯二酚和对苯二酚的方法.氧化峰电流与邻苯二酚和对苯二酚的浓度在1.0×10-5～1.0×10-3mol·L-1呈线性关系,检出限(3S/N)均达1.0×10-5mol·L-1.修饰电极用于模拟样品中邻苯二酚和对苯二酚的测定,回收率在82.0%～107.0%之间.     

丹皮酚在APTS与离子液体复合修饰碳糊电极上的电化学性质及电分析方法

研究了丹皮酚(PN)在3-氨基丙基三氧基硅烷(APTS)与离子液体(［BnMIM］PF6)复合修饰碳糊电极(APTS-［BnMIM］PF6/CPE)上的电化学行为和电化学动力学性质,并用循环伏安法(CV)及计时电流法(CA)测得PN在APTS-［BnMIM］PF6/CPE上的电极反应动力学参数。实验结果表明,PN在APTS-［BnMIM］PF6/CPE上发生了受扩散控制的不可逆电化学氧化过程。用方波伏安法(SWV)测得PN氧化峰电流与其浓度在9.0×10-7~2.0×10-4 mol?L-1和3.0×10-4~1.5×10-3 mol?L-1范围内呈良好线性关系,检出限(LOD,S/N=3)和定量下限(LOQ,S/N=10)分别为3.5×10-8 mol?L-1和1.2×10-7 mol?L-1。同时运用该方法对丹皮酚注射液中PN含量进行了电化学定量测定,其RSD为0.58%~2.4%,加标回收率为96.0%~102.0%。     

新型双核铜配合物修饰玻碳电极对抗坏血酸的电催化作用及其测定

采用电沉积方法将双核铜配合物修饰于玻碳(GC)电极表面制得了[LCu]2biPy/GC电极。研究了[LCu]2biPy/GC电极的电化学性质,并发现该电极对抗坏血酸具有良好的电催化氧化作用。考察了该电极作为抗坏血酸传感器的操作条件,结果表明:修饰电极在pH 7.0的磷酸盐(PBS)缓冲溶液,-0.2~0.8 V电位范围内,以50 mV.s-1进行循环伏安扫描,催化电流峰与抗坏血酸浓度在4.0×10-5~1.2×10-4mol.L-1范围内呈线性关系,检出限为2.5×10-6mol.L-1。用于3种水果汁中抗坏血酸的测定,测定结果的RSD在1.6%~2.1%之间,回收率在97.8%~102.1%之间。     

碳纳米管修饰电极对多巴胺和肾上腺素的电分离及同时测定

研究了多巴胺 (DA)和肾上腺素 (EP)在多壁碳纳米管 (MWNT)修饰电极上的电化学性质 ,发现该修饰电极对神经递质DA和EP有显著的增敏和电分离作用。还原峰电位差达ΔEp=390mV ,可同时测定DA和EP。DA和EP的还原峰电流与其浓度分别在 2 .0× 10 -6～ 1.0× 10 -3 mol/L和 1.0× 10 -6～ 1.0× 10 -3 mol/L浓度范围内呈良好的线性关系 ;方法的检出限分别为 1× 10 -6mol/L和 5× 10 -7mol/L。由于抗坏血酸 (AA)在MWNT修饰电极上的氧化是不可逆的 ,因此利用还原峰进行测定 ,消除了AA对DA和EP的干扰     

L-半胱氨酸自组装膜电极的表征及其对对苯二酚的差分脉冲伏安法测定

研究了 L-半胱氨酸自组装膜修饰金电极 ( L - Cys Au/SAMs)催化对苯二酚氧化的电化学行为 ,发现该膜电极大大降低了对苯二酚的氧化电位。采用水平衰减全反射 ( ATR) FTIR光谱技术和 K3Fe( CN) 6 电化学探针对 L- Cys Au/SAMs进行了表征。用差分脉冲伏安法 ( DPV)测定其氧化峰电流与对苯二酚的浓度在 2 .0× 1 0 - 6～ 2 .0× 1 0 - 4mol· L- 1范围内呈良好的线性关系 ,相关系数 0 .9986,检出限 4.0×1 0 - 7mol·L- 1。该电极用于模拟废水样的测定 ,结果满意。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

关于"对‘燃料电池物理及化学性能的有限时间热力学分析方法'的讨论”答复

把有限时间热力学理论用于化学过程的研究,将会得到一系列新的结论,开展这方面的研究是很有意义的.文献[1]以燃料电池为例,在同时考虑化学反应及传热不可逆性的情况下,研究了燃料电池的性能界限,文献[2]指出了文献[1]计算化学反应及传热不可逆性而引起系统与有关环境的总熵产生率的错误以及由此而导致的结论所存在的问题,并进行了富有启发性的分析与讨论.但文献[2]对于系统与有关环境的总熵产生率的计算也是不正确的,由此得到的其它结论自然不能成立.本文将就此情况下系统与有关环境的总熵产生率的计算再次进行讨论,并给出电池功率和效率的有限时间热力学性能界限.