Change in the intensity of light scattering in a magnetite colloid under the simultaneous action of electric and magnetic fields

The change in the intensity of light scattering in a colloidal solution of magnetite particles in kerosene under the simultaneous action of coaxial and mutually perpendicular electric and magnetic fields has been studied. It has been found that, at certain strengths of mutually perpendicular fields, the change in the scattering intensity is maximal. The effect observed has been interpreted on the basis of the Rayleigh-Debye-Gans anisotropic approximation within the model of orientation of aggregates of magnetite particles under the joint action of the fields.     

Formation of gold nanoparticles and their aggregates in a liquid at magnetron deposition

The influence of magnetron deposition conditions on the size of Au nanoparticles and their aggregates obtained by condensation in a neutral liquid is studied experimentally. A model is suggested in which the nanoparticles and aggregates form in a thin subsurface layer, which becomes oversaturated by atoms and resulting nanoparticles when the liquid flows through a localized deposition zone. The process stops when the products leave this zone because of stirring. The size of nanoparticles and aggregates depends on the particle flux density and exposure time in the deposition zone. The final size of nanoparticles depends on the exposure time only slightly, while that of aggregates significantly depends on the exposure time. This allows one to prepare a concentrated solution of almost monodisperse nanoparticles with a low degree of aggregation by properly selecting deposition conditions and multiply passing the liquid through the deposition zone.     

Highly ordered Ga nanodroplets on a GaAs surface formed by a focused ion beam

The morphological evolution of a GaAs surface induced by a focused ion beam (FIB) has been investigated by in situ electron microscopy. Under off-normal bombardment without sample rotation, Ga droplets with sizes from 70 to 25 nm in diameter on the GaAs surface can self-assemble into a highly ordered hexagonal pattern instead of Ostwald ripening or coalescence. The mechanism relies on a balance between anisotropic loss of atoms on the surface of droplets due to sputtering and an anisotropic supply of atoms on the substrate surface due to preferential sputtering of As. The ratio of wavelength to the droplet diameter predicted by this model is in excellent agreement with experimental observations.     

混响室复合搅拌方式的搅拌效率分析

为了评价混响室在不同搅拌方式下的搅拌效率,提高相关测试的精确度,对独立采样数这一重要指标的计算方法做了简单介绍,并在某大型混响室内,对200, 500, 1000 MHz频点下的机械搅拌与频率搅拌方式的搅拌效率进行了试验分析。结果表明:二者的搅拌效率均与工作频率成正比;在机械搅拌方式下,多个搅拌器在不同转速比下能够显著提高搅拌效率;频率搅拌的搅拌带宽选取越大搅拌效率越高;两种搅拌方式提供的独立采样点数均存在一个上限值。通过分析对比,提出了基于机械搅拌与频率搅拌相结合的复合搅拌方式,并对该方式的搅拌效率进行了重点分析,给出了该方式下独立采样点的计算方法,试验结果表明该复合搅拌方式可显著提高测试样本的独立采样数。     

Dynamics of late-stage phase separation in crystalline solids

The dynamics of Ostwald ripening in elastically stressed crystalline solids is determined through large-scale numerical simulations. Using the insight provided by the simulations, a theory for the dynamics of late-stage phase separation in elastically anisotropic homogeneous solids is developed. Both the theory and simulations show that for the systems considered elastic stress does not alter the exponent of the temporal power law for the average particle size but does affect the amplitude of the power law in a manner that is only a function of the symmetry of the particle morphology.     

Facile synthesis of titania/hyperbranched polyglycidol nanohybrids with controllable morphologies: from solid spheres,capsules to tubes

Titania/Hyperbranched polyglycidol (HBP) nanohybrids with tunable morphologies have been synthesized via a sol–gel process at ambient temperature. One-shot addition of varied amounts of titanium precursor tetraisopropoxide (TTIP) yields spherical titania/HBP solid particles with tunable size, while a controlled addition of TTIP results in spherical titania/HBP capsules. The average outer and inner diameters of the resultant capsules are also controllable according to the amount of TTIP via an Oswald ripening process. In addition, the modality of additional water supplied in the reaction systems can tune the morphologies of the resulting titania/HBP particles from nanocapsules to nanotubes owing to the accelerated hydrolysis rate of TTIP. The tunability in morphologies of the titania/HBP nanostructures ranging from solid spheres, capsules to tubes could be attributed to the self-assembly of a large amount of titania/HBP aggregates in a rapid, controlled and anisotropic manner, respectively. Surprisingly, by means of HBP contained in the resulting titania/HBP nanostructures, the gold nanoparticles are in situ generated and encapsulated into titania/HBP matrix in the absence of additional reducing agent. The as-prepared gold nanoparticles functionalized titania/HBP hybrids exhibit excellent catalytic function toward the reduction of 4-nitrophenol. This strategy demonstrates a typical example for functionalizing the titania/HBP hybrids targeted to specific applications.     

Fluctuations at the domain edges of nematic liquid crystals in two dimensions

Capillary waves and director fluctuations reduce the surface tension of a non-anchoring unbound nematic surface by comparable amounts. These are relatively small effects in three dimensions, but in two dimensions they become more significant. We examine the conditions in two dimensions under which they dominate explicitly within the framework of a model of the Maier-Saupe type. We find that for reasonable physical parameters of the model the onset of the fluctuation dominated regime generally preempts the nematic-isotropic transition. We conclude that processes which are sensitive to line tension, such as Ostwald ripening during two-dimensional liquid-gas phase separation, are much more strongly coupled to anisotropic molecular interactions and associated nematic ordering than in three dimensions. Received 10 February 1999 and Received in final form 29 March 1999     

Photoelasticity in polycrystalline aggregates

A theory for the photoelastic behaviour of transparent polycrystalline aggregates consisting of randomly oriented anisotropic crystallites has been developed. Such an aggregate is isotropic but it becomes birefringent under the influence of a uniaxial load. The photoelastic constants of the aggregate are given by the components of the spatial average of the photoelastic tensor of the single crystal, and are worked out by assuming either the strain to be continuous (Voigt approximation) or the stress to be continuous (Reuss approximation). The components of the average photoelastic tensor are very different for these two limits. The elastic and the photoelastic constants of alkali halide aggregates have been evaluated for both the stress continuity and the strain continuity conditions. The maximum variation of the elastic constants in going from the Voigt to the Reuss condition is 50 per cent while the photoelastic birefringence can vary by as much as 300 per cent in alkali halides. In the case of KI and rubidium halides even the sign of the photoelastic birefringence is different for the two limits.     

Chaotic mixing induced transitions in reaction-diffusion systems

We study the evolution of a localized perturbation in a chemical system with multiple homogeneous steady states, in the presence of stirring by a fluid flow. Two distinct regimes are found as the rate of stirring is varied relative to the rate of the chemical reaction. When the stirring is fast localized perturbations decay towards a spatially homogeneous state. When the stirring is slow (or fast reaction) localized perturbations propagate by advection in form of a filament with a roughly constant width and exponentially increasing length. The width of the filament depends on the stirring rate and reaction rate but is independent of the initial perturbation. We investigate this problem numerically in both closed and open flow systems and explain the results using a one-dimensional "mean-strain" model for the transverse profile of the filament that captures the interplay between the propagation of the reaction-diffusion front and the stretching due to chaotic advection. (c) 2002 American Institute of Physics.     

Development of a high pressure stirring cell up to 2 GPa: a new window for chemical reactions and material synthesis

ABSTRACT

A new method for stirring under high pressure conditions has been developed and tested. The key component is a Teflon cell assembly equipped with magnetic stirring function, which is capable to operate across a wide pressure range, up to at least 2?GPa, in a large volume press. The setup enables adjustable stirrer rotation rate and detection of stirring in a sample, e.g. to observe liquid–solid phase transitions at high pressure. The viscosity limit of stirring is ca. 500 times that of water at room temperature (i.e. ～500?mPas). Moreover, we show that zinc oxide nanoparticles hydrothermally synthesized at 0.5?GPa and 100°C under stirring conditions show an order of magnitude smaller size (100?nm) compared to those synthesized under non-stirring conditions (1?μm). The wide pressure range for stirring of viscous media opens interesting possibilities to produce novel materials via hydrothermal synthesis and chemical reactions.     

X-ray-assisted formation of gold nanoparticles in soda lime silicate glass: suppressed Ostwald ripening

The in situ formation of gold nanoparticles in soda lime silicate glass under constant x-ray irradiation is compared with the ex situ formation in preirradiated glasses. The ASAXS measurements confirm that pure Au particles are formed. The comparison shows that the number of particles nucleated under irradiation is about an order of magnitude higher than of those nucleated with preirradiation. The radius, R, remains slightly below 1 nm under in situ conditions and the Ostwald ripening stage is slowed down. Under ex situ conditions Ostwald ripening is clearly observed and R grows up to 3 nm.     

In-situ characterization of metal clusters supported on a birefringent substrate using reflectance difference spectroscopy

Reflectance difference spectroscopy has been applied for the in-situ characterization of the growth of Ag cluster films on insulating birefringent Al₂O₃ (10[`1]0)(10\overline{1}0) substrates in the spectral range of 1.5–5 eV. Information on the individual cluster, cluster film morphology and growth are derived from the anisotropy of the in-plane plasmon resonances in comparison with scanning electron microscopy images. In particular, the evolution of the dipolar resonance has been attributed to two distinct stages of coarsening involving particle aggregation and ripening, and to the development of anisotropic particle shapes for higher Ag coverages. The effect of the formation of anisotropic electrostatic images in the birefringent substrate is used to explain the spectra even in the absence of structural anisotropies.     

Numerical simulations of sonochemical production and oriented aggregation of BaTiO3 nanocrystals

Numerical simulations of sonochemical production and oriented attachment of BaTiO₃ nanocrystals are performed in aqueous solution with pH 14. It is suggested that most significant effect of ultrasound is the dissolution of Ti-based gel in aqueous solution. It results in the dissolution-precipitation mechanism in the production of BaTiO₃ nanoparticles, while with mechanical stirring without ultrasound it is the in situ mechanism that BaTiO₃ is gradually formed on Ti-based gel. The oriented attachment of spherical BaTiO₃ nanocrystals occurs by van der Waals torque (Casimir torque). Large aggregates of nanocrystals do not attach with each other as the repulsive double layer interaction is stronger for larger aggregates. For smaller spherical nanocrystals, the alignment of the crystal axes is less accurate due to more significant rotational Brownian motion of the nanocrystals.     

Ultrasound assisted enzyme catalyzed transesterification of waste cooking oil with dimethyl carbonate

This work reports the production of biodiesel with waste cooking oil and dimethyl carbonate in solvent free system through transesterification by immobilized enzyme (Novozym 435) under the influence of ultrasound irradiation. The experiments were conducted in an ultrasonic water bath under three different conditions i.e. ultrasonic irradiation (UI) without stirring, UI coupled with stirring and only stirring to compare their overall effects on fatty acid methyl esters (FAME) conversion. As compared with the conventional stirring method, where FAME conversion was 38.69% at 4 h, the UI without stirring significantly enhanced the conversion of enzymatic transesterification to 57.68% for the same reaction time. However the reaction rate was further increased under the condition of ultrasonication coupled with stirring and resulted into higher conversion of 86.61% for the same reaction time. Effects of reaction parameters, such as temperature, ratio of DMC/oil, speed of agitation and enzyme loading on the conversion were investigated. Furthermore, repeated use of Novozym 435 showed gradual decline in both conversion as well as enzyme activity.     

Excitable media in a chaotic flow

The response to a localized perturbation of an excitable medium under stirring by chaotic advection is investigated. It is found that below a critical stirring rate a localized perturbation produces a coherent global excitation of the system. For very slow stirring, however, the coherence of the global excitation is gradually lost. We propose a simple model to describe the effect of the flow on the excitable dynamics, and explain the observed behavior as a consequence of a steady excited filament state found in the reduced problem.     

Anisotropic ferromagnetism induced in rutile single crystals by Co implantation

The magnetic and electrical properties of Co-implanted single crystalline TiO₂ rutile are presented. For fluences of the order of 10¹⁷ cm^-2 and implantation energy of 150 keV the maximum atomic concentration of cobalt is 13 at% at a depth of 65 nm from the surface. The as implanted single crystals exhibit superparamagnetic behaviour attributed to the formation of nanosized cobalt clusters. After annealing at 1073 K an anisotropic ferromagnetic behaviour emerges with the easy magnetization axis lying in the (001) plane of rutile. The ferromagnetic behaviour is associated with oriented cobalt aggregates. Electrical conductivity of the implanted samples annealed in vacuum also exhibits anisotropic behaviour at low temperatures, but no magnetoresistive effects were detected.     

Efficient omnidirectional couplers achieved by anisotropic photonic crystal waveguides

Photonic crystals (PCs) have many potential applications because of their ability to control light-wave propagation. We have investigated omnidirectional couplers in two-dimensional anisotropic PC structures. The anisotropic PC coupler composed of an anisotropic-dielectric cylinder in air is studied by solving Maxwell's equations using the plane wave expansion method and finite-difference time-domain method. The photonic band structures are found to exhibit absolute bandgaps for the square lattices. Numerical simulations show that the incident light-waves at both transverse electric and transverse magnetic modes have efficient coupling in anisotropic PC coupler with square lattices. The guided modes and coupling length are analyzed by considering various line defect anisotropic PC waveguides and interaction regions of couplers. Such a mechanism of omnidirectional coupling should open up a new application for designing components in photonic integrated circuits.     

Effect of coal ash on hydrazine degradation under stirring and ultrasonic irradiation conditions

The degradation of hydrazine (N(2)H(4)) with concentrations of 0.1-5.0 mmol/L was investigated as a function of amount of coal ash (0.0-5.0 wt%) under the stirring (300 rpm) and ultrasonic irradiation (200 kHz, 200 W) conditions. It was found that the rate of decrease in the hydrazine concentration depended upon an amount of coal ash under the stirring and ultrasonic irradiation condition. It was considered under the stirring condition that hydrazine was adsorbed and degraded partly on coal ash. Furthermore, the sonochemically formed OH radicals were more effective in the hydrazine degradation than stirring condition in the presence of an intermediate amount of coal ash (0.6-2.4 wt%), whereas the effect of OH radicals disappeared in the presence of coal ash more than 2.4 wt%.     

绝热搅拌槽内流体平均剪切速率的一种计算方法

基于流体流动的剪切速率与能量耗散率、以及能量散率与流体温升速率的关系,提出了根据搅拌过程中流体温升速率计算绝热搅拌槽内流体平均剪切速率的方法,并会对一个实验室用的小型高速搅拌系统,建立了流体平均剪切速率与流体黏度及搅拌转速关系的经验模型。本方法确定的是全槽流体的平均剪切速率,其应用不受叶轮类型的限制,可用于湍流搅拌,弥补了Metzner-Otto方法的若干不足。对于控温搅拌槽,可先在绝热条件下确定平均剪切速率与搅拌转速、流体流变性参数及体积的关系。     

Noise-sustained coherent oscillation of excitable media in a chaotic flow

Constructive effects of noise in spatially extended systems have been well studied in static reaction-diffusion media. We study a noisy two-dimensional Fitz Hugh-Nagumo excitable model under the stirring of a chaotic flow. We find a regime where a noisy excitation can induce a coherent global excitation of the medium and a noise-sustained oscillation. Outside this regime, noisy excitation is either diluted into homogeneous background by strong stirring or develops into noncoherent patterns at weak stirring. These results explain some experimental findings of stirring effects in chemical reactions and are relevant for understanding the effects of natural variability in oceanic plankton bloom.