Lumas-30 time-of-flight mass spectrometer with pulsed glow discharge for direct determination of nitrogen in steel

The problem of quantitative determination of nitrogen in steel has become one of the main tasks in modern metallurgy due to the intensive use of nitrogen as an alloy additive. The presence of such additives is known to improve a number of steel characteristics (corrosion resistance, nonmagnetic behavior, strength, etc.). Both direct and indirect analytical methods have many disadvantages and call for revision. The direct technique of nitrogen determination in steel using a a pulsed glow discharge time-of-flight mass spectrometry is proposed in this paper. Successful application of the method for steel samples with different nitrogen concentrations was demonstrated. Dependence of the nitrogen signal intensity as a function of the repelling pulse delay was investigated, and the optimal delay time was obtained. The detection limit of for the proposed method was found to be 0.03%.     

Elimination of water interference in pulsed glow discharge time-of-flight mass spectrometry

The presence of water in the discharge cell is a serious problem in glow discharge mass spectrometry. Even very small quantities of water can make considerable changes in the composition and electrical parameters of the plasma, which lead to a decrease in the signal intensity and the appearance of various cluster components. This results in a very complicated mass spectrum and significantly deteriorates the analytical performance of the method. Different approaches to solving the this problem are discussed in the paper. A multiple position interface that allows analyzing 6–10 samples without decapsulation of the discharge cell is presented in this work. It is also shown that the use of a tantalum auxiliary cathode ensures a several-order depression of the interfering components (OH⁺, OH ₂ ⁺ , OH ₃ ⁺ , ¹²C¹H ₂ ⁺ , ¹⁶O⁺, ¹²C¹H ₃ ⁺ ) because of its getter behavior. The simultaneous application of all proposed approaches ensures solving the problem of interferences in the combined hollow cathode with pulsed glow discharge to the great extent.     

Study of a pulsed glow discharge ion source for time-of-flight mass spectrometry

This paper describes a new type of glow discharge (GD) ion source coupled to a time-of-flight mass spectrometer (TOFMS). The GD is operated in the microsecond pulse (μs-pulse) mode. The operational parameters of the μs-pulse GD were optimized against the ion signals, giving 180 Pa for the discharge pressure, 3 A for the transient discharge current, 1.75 kHz for the discharge frequency and 2 μs for the discharge pulse duration. Experimental results show that the discharge current in the μs-pulse mode can be one order of magnitude higher than that obtained in the d.c. mode. The structure of the interface between the μs-pulse GD and the mass spectrometer was found to be critical, and a Macor disc must be applied in front of the sampling orifice in order to shield the sampling plate from the anode of the GD to achieve both a good vacuum and the best sputtering. A transient sputtering rate of 24.4 μs s⁻¹ mm⁻² was reached in the μs-pulse mode and was significantly higher than that for the d.c.-GD. Typical mass spectra of brass and nickel samples were studied and are discussed. © 1997 Elsevier Science B.V.     

Improving pulsed radiofrequency glow discharge for time-of-flight mass spectrometry simultaneous elemental and molecular analysis

The performance of radiofrequency (rf) millisecond pulsed glow discharge (PGD) coupled to a fast orthogonal time-of-flight mass spectrometer (TOFMS) for chemical characterization and quantification of organic volatile compounds was investigated by using two different GD chamber designs. The designs investigated had substantial differences in the way that the volatile organic compound is introduced into the GD and the distance between the cathode and the sampling cone of the mass spectrometer. Bromochloromethane was selected as the model analyte because of the practical interest of determining trihalomethanes at low concentrations, and also because of both its low boiling point (to avoid problems associated with condensations in the interface) and the fact that it has two different heteroatoms, making the fragmentation patterns easier to follow. Pulse shapes of element, fragment, and molecular parent ions obtained by using the two GD chambers under investigation were critically compared. Results revealed the critical effect of the GD chamber geometry in obtaining the three types of chemical information, temporally discriminated. The spectra of the gaseous samples and of a polymer containing TBBPA (solid sample) were also compared. Detection limits for bromochloromethane in the order of low ng L^?1, and the required high tolerance of the plasmas to the introduction of organic vapours, were achieved using one of the proposed GD designs. The capability of the designed system for the analysis of other volatile compounds, for example dimethyl disulfide and dimethyl selenide, was also successfully evaluated, making use of the analytical potential of the information obtained from the different pulse time regions. Figure

?     

Elemental ratio determinations and compound-independent calibration using microsecond pulsed glow discharge time-of-flight mass spectrometry

A new prototype based on a microsecond pulsed glow discharge ion source coupled to a time-of-flight mass spectrometer was recently designed, constructed and analytically evaluated in our laboratory for simultaneous collection of elemental and molecular information, and as a gas-chromatographic detector of compounds of environmental concern. To investigate further the analytical capabilities of such a new setup, its capability for the determination of element ratios in volatile organic halogenated compounds has been explored. Moreover, compound-independent calibration has been carried out with the prototype as well. The results demonstrated that the intensity ratios (analyte to internal standard) were linear with the corresponding ratio of concentrations. Both for chlorine and bromine (measured in the prepeak) and for BrC (measured in the plateau) the slope was 1 and the intercept was 0. Moreover, detection limits were improved by more than 1 order of magnitude as compared with using external calibration. The applicability of the proposed approach has been demonstrated for the straightforward determination of chloroform in drinking and river waters.     

Miniaturized linear time-of-flight mass spectrometer with pulsed extraction

Improved resolution for a miniaturized instrument is demonstrated at high masses using a pulsed extraction, 3(") linear time-of-flight (TOF) mass analyzer. This illustrates the utility of a small and simple mass spectrometer for biological/medical analyses. Current and future applications suggested by this instrument include rapid mass spectral reading of oligonucleotides that differ in one base (single nucleotide polymorphisms), distinction of biomarker signatures from different species of bacterial spores (biological weapons detection) and point-of-care instruments for proteomics-based diagnostics. We have incorporated a two-stage, pulsed-extraction design that places the focal plane of the ions at the detector channel plate surface. The ions are accelerated to a total energy of 12 keV to enable detection of high-mass proteins in a design that incorporates a floatable flight tube set at the voltage of the front channel plate of the detector. The resultant elimination of post-acceleration at the detector is intended to improve mass resolution by reducing the difference in arrival times between ions and their neutral products. Resolutions of one part in 1200 at m/z 4500 and one part in 600 at m/z 12 000 have been achieved. Proteins with molecular masses up to 66 000 Da, mixtures of oligonucleotides, and biological spores have all been successfully measured, results that increase the potential use of this TOF analyzer.     

Polymer screening by radiofrequency glow discharge time-of-flight mass spectrometry

The aim of this work is to optimise and evaluate radiofrequency glow discharge (RF GD) time-of-flight mass spectrometry (TOFMS) for identification of organic polymers. For this purpose, different polymers including poly[methylmethacrylate], poly[styrene], polyethylene terephthalate-co-isophthalate and poly[alpha-methylstyrene] have been deposited on silicon wafers and the RF GD-TOFMS capabilities for qualitative identification of these polymeric layers by molecular depth profiling have been investigated. Although some molecular information using the RF continuous mode is available, the pulsed mode offers a greater analytical potential to characterise such organic coatings. Some formed polyatomic ions have proved to be useful to identify the different polymer layers, confirming that layers having similar elemental composition but different polymer structure could be also differentiated and identified.     

Evaluation of a pulsed glow discharge time-of-flight mass spectrometer as a detector for gas chromatography and the influence of the glow discharge source parameters on the information volume in chemical speciation analysis

The figures of merit of a pulsed glow discharge time-of-flight mass spectrometer (GD-TOFMS) as a detector for gas chromatography (GC) analysis were evaluated. The mass resolution for the GD-TOFMS was determined on FWHM in the high mass range (²⁰⁸Pb⁺) as high as 5,500. Precision of 400 subsequent analyses was calculated on ⁶³Cu⁺ to be better than 1% RSD with no significant drift over the time of the analysis. Isotope precision based on the ⁶³Cu⁺/⁶⁵Cu⁺ ratio over 400 analyses was 1.5% RSD. The limits of detection for gaseous analytes (toluene in methanol as solvent) were determined to be as low as several hundred ppb or several hundred pg absolute without using any pre-concentration technique. Furthermore, the different GD source parameters like capillary distance, cathode–anode spacing, and GD source pressure with regards to the accessible elemental, structural, and molecular information were evaluated. It was demonstrated that each of these parameters has severe influence on the ratio of elemental, structural, and parent molecular information in chemical speciation analysis.     

A pulsed time-of-flight mass spectrometer for liquid secondary ion mass spectrometry

The design and performance of a new time-of-flight mass spectrometer is reported. The instrument combines the advantages of a pulsed drawout TOF analyzer with a liquid secondary ion source. Differences from commercially available pulsed TOF analyzers (Wiley/McLaren type) are discussed with regard to operation with ion desorption from a liquid matrix.     

Evaluation of pulsed radiofrequency glow discharge time-of-flight mass spectrometry for precious metal determination in lead fire assay buttons

In this paper, an exploration of the capabilities and limitations of pulsed radiofrequency glow discharge time-of-flight mass spectrometry (GD-TOFMS) for the determination of the precious metals Ag, Au, Pd, Pt and Rh in lead buttons obtained by Pb fire assay is reported on. Since the matrix consists almost entirely of lead (>99%), the occurrence of doubly charged Pb (Pb²⁺) ions can hinder accurate determination of Rh. This problem was counteracted by relying on the time-resolved formation of different ion types over the pulse period of the glow discharge, which allows discrimination against the Pb²⁺ ions. The formation of ArCu⁺ ions as a result of the use of a copper anode was assessed to pose no threat to the accuracy of the results obtained for the set of samples analyzed as its contribution to the total signal at m/z = 103 could be adequately corrected for. The method developed was evaluated in terms of accuracy and precision using a set of Pb button standards with analyte concentrations between 5 and 100 μg g⁻¹. For the purpose of validation, a 10 μg g⁻¹ standard was considered as a sample. Overall, an acceptable accuracy was obtained with a bias of <5% between the experimental results and the corresponding reference values, except for Au, for which a larger deviation occurred. Precision values (repeatability) of typically <5% relative standard deviation (RSD) (for N = 3) were obtained and the limits of detection (LODs) vary from ∼0.020 μg g⁻¹ for Ag to ∼0.080 μg g⁻¹ for Pt.     

Tunable fragmentation of organic molecules in laser ablation glow discharge time-of-flight mass spectrometry

A DC-pulsed glow discharge (GD) has distinct temporal regimes which are characterized by “softer” or “harder” ionization of analytes introduced into the discharge. It is thus possible to obtain both molecular weight and structural fragment information from the same spectra. In order to extend the capabilities of this technique a laser ablation (LA) sampling system was coupled to a DC-pulsed GD and to a time-of-flight (TOF) mass spectrometer (MS) for characterizing organic samples such as oleic acid, reserpine, two different peptides, and a polymer. Both hard and soft ionization regimes were studied. These LAGD-TOFMS results were compared to matrix-assisted laser desorption ionization (MALDI) spectra using the same compounds (i.e., analytes, concentration, and matrix). It was found that LAGD offers tunable ionization and provides a reduced matrix dependence. However, the sensitivity achieved by the prototype LAGD-TOFMS was significantly lower when compared with commercially available MALDI-TOFMS instrumentation. Since LAGD-TOFMS is rather new, some technical details to increase its sensitivity are discussed.     

Model of microsecond pulsed glow discharge in hollow cathode for mass spectrometry

A new model for microsecond pulsed glow discharge in a hollow cathode and its afterglow is described. The model is based on the Monte-Carlo method together with a new method for electrical field calculation, which is based on some phenomenological laws of plasma behavior. The afterglow model uses continuity and Poisson equations. A qualitative agreement between the model results and results published in experimental and theoretical works is demonstrated. Some processes in the microsecond pulsed discharge in the hollow cathode, such as sputtering, ionization and transfer of sample, are investigated. The model is successfully used for the optimization of the operational parameters of the time-of-flight mass spectrometer with ionization by microsecond pulsed glow discharge in a hollow cathode.     

Spectroscopic evaluation of a compact magnetically boosted radiofrequency glow discharge for time-of-flight mass spectrometry

A compact magnetically boosted radiofrequency glow discharge (GD) has been designed, constructed and its analytical potential evaluated by its coupling to a mass spectrometer (MS). Simple modifications to the original source configuration permitted the insertion of permanent magnets. Small cylindrical Nd–Fe–B magnets (∅ = 4 mm, h = 10 mm) were placed in an in-house-modified GD holder disc that allows easy and fast exchange of the magnets. The different processes taking place within the GD plasma under the influence of a magnetic field, such as sputtering, ionisation processes and ion transport into the MS, were studied using different GD operating conditions. Changes to the ionisation and ion transport efficiency caused by the magnetic field were studied using an rf-GD-TOFMS setup. A magnetic field of 60–75 gauss (G) was found not to affect the sputtering rates but to enhance the analyte ion signal intensities while decreasing the Ar species ion signals. Moreover, magnetic fields in this range were shown not to modify the crater shapes, enabling the fast and sensitive high depth resolved analysis of relatively thick coated samples (micrometre) by using the designed compact magnetically boosted rf-GD-TOFMS.

Analytical glow discharge mass spectrometry

Various types of glow discharge mass spectrometric systems as well as their applications are considered. Special attention is paid to radiofrequency and pulsed glow discharges combined with time-of-flight mass spectrometers. Along with typical application fields of glow discharge mass spectrometry, analysis of semiconductors, polymers, and dielectrics, as well as isotope analysis and depth profiling are also reviewed. Some methods of standard-free mass spectrometric analysis of solids are considered. Prospects for combining glow discharge mass spectrometry with preliminary chromatographic separation are discussed.     

Electrical characteristics of a millisecond pulsed glow discharge

A μs and ms pulsed argon glow discharge was investigated with respect to the breakdown condition (Paschen curve). Moreover, current–voltage profiles were acquired for different discharge frequencies, pulse durations, cathode–anode spacing and discharge pressures. The breakdown voltage was dependent on the cathode material (Cu, steel, Ti and Al). No severe change in the breakdown voltage was observed for a 1 ms pulse at different frequencies. However, the theoretical breakdown curve, calculated based on the Paschen equation did not fit the experimental data. The current plots for different cathode–anode spacing showed a maximum at intermediate distance (8–10 mm). These data were consistent with mass spectrometric data acquired using the same instrument in a GC-GD-TOFMS chemical speciation study.     

A constant-momentum/energy-selector time-of-flight mass spectrometer

A matrix assisted laser desorption/ionization time-of-flight mass spectrometer has been built with an ion source that can be operated in either constant-energy or constant-momentum acceleration modes. A decreasing electric field distribution in the ion-accelerating region makes it possible to direct ions onto a space-focal plane in either modes of operation. Ions produced in the constant-momentum mode have velocities and, thus, flight times that are linearly dependent on mass and kinetic energies that are inversely dependent on mass. The linear mass dispersion doubles mass resolving power of ions accelerated with space-focusing conditions in constant-momentum mode. The mass-dependent kinetic energy is exploited to disperse ions according to mass in a simple kinetic energy filter constructed from two closely spaced, oblique ion reflectors. Focusing velocity of ions of the same mass can substantially improve ion selection for subsequent post source decay or tandem time-of-flight analyses.     

辉光放电质谱技术应用进展

对辉光放电质谱(GDMS)在金属与半导体、非导体、薄层与深度分析、分子信息分析方面的应用和一些新装置、新方法进行了综述.着重介绍了近20年来我国学者在辉光放电质谱方面的成就,并结合国际上的报道对该领域的发展现状进行了总结.     

RF-pulsed glow discharge time-of-flight mass spectrometry for glass analysis: Investigation of the ion source design

Radiofrequency (RF) millisecond pulsed glow discharge (PGD) coupled to time-of-flight mass spectrometry (TOFMS) was investigated for direct elemental analysis of glass samples. Aiming at achieving highest elemental sensitivity, appropriate discrimination from polyatomics, and good crater shapes on glasses, a new Grimm-type GD chamber (termed from now “UNIOVI GD”, designed and constructed in our laboratory) was coupled to TOFMS, and the results compared with those obtained with the former GD design (here denominated as “GD.1”) of the initial RF-PGD-TOFMS prototype. The critical differences distinguishing the two GDs under scrutiny are the GD chamber thickness (15.5 mm for the GD.1 and 7 mm for the UNIOVI GD) and the “flow tube” which is inserted in the GD.1 and inexistent in UNIOVI GD.     

Determination of arsenic by hydride generation coupled to time-of-flight mass spectrometry with a gas sampling glow discharge

Hydride generation has been used with a gas-sampling glow discharge (GSGD) and time-of-flight mass spectrometry (TOFMS) for the determination of arsenic in solution. Helium, neon, hydrogen, and argon glow discharges have been successfully generated and characterized. Current–pressure–voltage curves were generated for each discharge in the presence and absence of hydride generation. The arsenic detection limit for each of the discharges was found to be 0.60 (HeGSGD), 3.8 (NeGSGD) and 6.4 ppb (H₂GSGD). The HeGSGD was found to be the most attractive source for arsenic determination due to the lower detection limit, higher sensitivity and greater stability. The figures of merit for these discharges were also compared to those obtained with hydride generation-inductively coupled plasma TOFMS. Noise power spectra obtained for the neon GSGD indicated that no discernible discrete-frequency (whistle-noise) components were present in the analyte signal.     

Construction of a new multi-turn time-of-flight mass spectrometer

A new type of multi-turn time-of-flight mass spectrometer was constructed, consisting of four cylindrical electric sectors and 28 electric quadrupole lenses, the size of the vacuum chamber being 60 x 70 x 20 cm. It was demonstrated that the mass resolution can be increased according to the number of cycles of the ions through the ion optical system.