Binary versus ternary interactions in a completely miscible three‐polymer blend system: Poly(ϵ‐caprolactone) with two different methacrylic polymers

A truly miscible ternary miscible blend consisting of poly(?‐caprolactone) (PCL), poly(phenyl methacrylate), and poly(benzyl methacrylate) (PBzMA) was discovered. The three‐polymer blend system was completely miscible within the entire composition range at ambient temperature up to about 150 °C, and ternary phase diagrams at increasing temperatures were characterized and interpreted. A ternary‐interaction model based on the modified Flory–Huggins expression was used to describe the phase diagrams with the individual binary interaction strengths. The model fitted well with the experimental‐phase diagram for the ternary blend system at T = 250 °C, where the binary PCL‐PBzMA blend system is on the critical points of phase separation. Interpretation of discrepancy between the model and experimental at other temperatures was handled with an empirical approach. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 747–754, 2002     

Preparation and phase behavior of poly(4‐trimethylsilylstyrene)‐block‐polyisoprene

Three poly(4‐trimethylsilylstyrene)‐block‐polyisoprenes (TIs), the molecular weights of which were 82,000, 152,000 and 291,000 (TI‐82K, TI‐152K, and TI‐291K), were synthesized by sequential anionic polymerizations. The component polymers were a miscible pair that presented a lower critical solution temperature phase diagram if blended. The TI phase behavior was investigated with transmission electron microscopy. The order–disorder transition could be observed at a temperature between 200 °C (the ordered state) and 150 °C (the disordered state) for the block copolymer TI‐152K. The block copolymer TI‐82K presented the disordered state at 200 °C, whereas TI‐291K was in the ordered state at 150 °C. With the Flory–Huggins interaction parameter between poly(4‐trimethylsilylstyrene) and polyisoprene, which was evaluated by small‐angle neutron scattering for the block copolymers, the TI phase behavior could be reasonably explained by mean‐field theory. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1214–1219, 2005     

Preparation and properties of polybenzoxazine/poly(imide‐siloxane) alloys: In situ ring‐opening polymerization of benzoxazine in the presence of soluble poly(imide‐siloxane)s

Benzoxazine monomer (Ba) was blended with soluble poly(imide‐siloxane)s in various weight ratios. The soluble poly(imide‐siloxane)s with and without pendent phenolic groups were prepared from the reaction of 2,2′‐bis(3,4‐dicarboxylphenyl)hexafluoropropane dianhydride with α,ω‐bis(aminopropyl)dimethylsiloxane oligomer (PDMS; molecular weight = 5000) and 3,3′‐dihydroxybenzidine (with OH group) or 4,4′‐diaminodiphenyl ether (without OH group). The onset and maximum of the exotherm due to the ring‐opening polymerization for the pristine Ba appeared on differential scanning calorimetry curves around 200 and 240 °C, respectively. In the presence of poly(imide‐siloxane)s, the exothermic temperatures were lowered: the onset to 130–140 °C and the maximum to 210–220 °C. The exotherm due to the benzoxazine polymerization disappeared after curing at 240 °C for 1 h. Viscoelastic measurements of the cured blends containing poly(imide‐siloxane) with OH functionality showed two glass‐transition temperatures (T_g's), at a low temperature around ?55 °C and at a high temperature around 250–300 °C, displaying phase separation between PDMS and the combined phase consisting of polyimide and polybenzoxazine (PBa) components due to the formation of AB‐crosslinked polymer. For the blends containing poly(imide‐siloxane) without OH functionalities, however, in addition to the T_g due to PDMS, two T_g's were observed in high‐temperature ranges, 230–260 and 300–350 °C, indicating further phase separation between the polyimide and PBa components due to the formation of semi‐interpenetrating networks. In both cases, T_g increased with increasing poly(imide‐siloxane) content. Tensile measurements showed that the toughness of PBa was enhanced by the addition of poly(imide‐siloxane). Thermogravimetric analysis showed that the thermal stability of PBa also was enhanced by the addition of poly(imide‐siloxane). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2633–2641, 2001     

Thermodynamics of nematic phases formed from semiflexible chain polymers

In co[poly(ethylene terephthalate)-p-oxybenzoate] containing 30 mole % oxybenzoate units, the ethylene terephthate units crystallize. The copolymer melts in the temperature range 180–210°C to form a nematic phase which, at a higher temperature, transforms to an isotropic liquid. The latent heat of the first transition is 5 cal/g, and the thermodynamic melting temperature, 247°C, is essentially that expected for a random copolymer of this composition. The nematic → isotropic transition occurs at 244°C, with an enthalpy change of 3.2 cal/g (10% of the heat of fusion of poly(ethylene terephthalate)). We conclude that semiflexible polymers form a nematic phase which is rather highly disordered. The model of the nematic phase treated by Flory is modified to increase its entropy through incorporation of chain bends (which must be correlated in position and direction with those in neighboring molecules). This increases the chain extension, as measured by the fraction (1–f) of collinear chain bonds, required to form the nematic phase. For binary polymer-solvent systems, an appropriate scaling of f values leaves the phase diagram as predicted by Flory's treatment essentially unchanged.     

Dual entropic and enthalpic processes in the lower critical solution temperature phase separation of poly(vinyl methyl ether) aqueous solutions

In the lower critical solution temperature phase separation of poly(vinyl methyl ether) aqueous solutions, the process corresponding to the weakening of the hydrogen bond interaction with increasing temperature is dominant and occurs over the entire concentration region of solutions and over a broad temperature range from 30 to 41°C, giving rise to the energetic enthalpic effect during phase separation, while the conformational change, that is, collapse of the swollen polymer coils, occurs only in the swelling polymer solution when the water concentration is above 38.3 wt %, giving rise to the entropic effect during phase separation. In addition, the entropic process corresponding to the collapse of the polymer coils occurs in a much narrow theta temperature range from 35.5 to 37°C. If the solution is held at a constant temperature for a sufficiently long time, 90% collapse of the polymer coils occurs in only the 0.5 °C temperature region between 35.5 and 36°C. Accordingly, in the enthalpic process, the most dramatic blueshift of the νC‐O bond peak occurs in the temperature range between 35 and 41°C, while this blueshift is only approximately 2 cm^?1 in the temperature range from 30 to 35°C, prior to the collapse of the polymer coils due to the entropic effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 323–330     

Thermogelling hydrogels of poly(ε-caprolactone-co-D,L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L-lactide) and poly(ε-caprolactone-co-L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L-lactide) aqueous solutions

Thermogelling poly(ε-caprolactone-co-D,L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L -lactide) and poly(ε-caprolactone-co-L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L -lactide) triblock copolymers were synthesized through the ring-opening polymerization of ε-caprolactone and D,L -lactide or L -lactide in the presence of poly(ethylene glycol). The polymerization reaction was carried out in 1,3,5-trimethylbenzene with Sn(Oct)₂ as the catalyst at various temperatures, and the yields were about 96%. The molecular weights and polydispersities (M_w/M_n) by gel permeation chromatography were in the ranges of 5140–6750 and 1.35–1.45, respectively. The differential scanning calorimetry results showed that the melting temperatures of the poly(ε-caprolactone) components were between 30 and 40 °C. By the subtle tuning of the chemical compositions and microstructures of these triblock copolymers, the aqueous solutions underwent sol–gel transitions as the temperature increased, with the suitable lower critical solution temperature in the range of 17–28 °C at different concentrations. Transesterification in the polymerization process generated the redistribution of sequences, which remarkably affected the sol–gel transition temperature. The amphiphilic copolymers formed micelles in aqueous solutions with a diameter of 62 nm and a critical micelle concentration of about 0.032 wt % at 20 °C. Micelles aggregated as the temperature increased, leading to gel formation. The sol–gel transition was studied, with a focus on the structure–property relationship. It is expected to have potential applications in drug delivery and tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4091–4099, 2007     

Poly(N-isopropylacrylamide). II. Effect of polymer concentration,temperature, and surfactant on the viscosity of aqueous solutions

The effects of polymer concentration, temperature, and surfactant on the rheological properties of poly(N-isopropylacrylamide), poly NIPAM, were studied. Below 28°C the viscosity decreased with increasing temperature according to the Arrhenius expression. However, at 29°C the viscosity increased to a maximum value at 32°C, the lower critical solution temperature (LCST) for aqueous polyNIPAM. Higher temperatures gave a much lower viscosity. This unusual rheological behavior was explained by the phase behavior of the polymer. Sodium dodecyl sulfate (SDS) binding to polyNIPAM increased the cloud point temperature (CPT) and attenuated the unusual rheological behavior of polyNIPAM in water. © 1993 John Wiley & Sons, Inc.     

Direct observation of morphological differences as a function of reaction temperature in model systems for polyurethane foams

A series of polyurea urethanes was isothermally synthesized from toluene diisocyanate (TDI), water, and trifunctional poly(propylene oxide) in the temperature range of 50–150°C. Morphologies of the samples vary significantly as a function of reaction temperature. In this system, phase separation competes with polymerization and crosslinking. Both transmission electron microscopy and atomic force microscopy have shown a network type of structure for the 50°C samples, while the 150°C samples appear to be homogeneous. Infrared analysis shows that samples prepared at 150°C possess a morphology that is less strongly hydrogen bonded and has a broader distribution of hydrogen-bonded states compared to those prepared at lower temperatures. From this combination of techniques, it can be inferred that phase separation occurs faster than crosslinking at low temperatures; consequently, a phase-separated morphology forms. In contrast, crosslinking occurs faster than phase separation at higher reaction temperatures. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3065–3077, 1998     

Poly(ether tert‐amine): A novel family of multiresponsive polymer

A novel multiresponsive poly(ether tert‐amine) (PEA) was synthesized by nucleophilic addition/ring‐opening reaction of commercial poly(ethylene oxide) (PEO), poly(propylene oxide) (PPO), and di‐epoxy and di‐amine monomer. The process of synthesis was very simple and green in ethanol as reactive media. These PEAs exhibit sharp response to temperature, pH, and ionic strength, with adjustable and sharp phase transitions in the range of 27–100 °C. The lower critical solution temperature (LCST) of PEA's aqueous solution presents a linear relationship to the PEO content (y = 35.7 + x), indicating well‐tunable LCST. The concentration of PEA has no obvious effect on LCST. Therefore, PEA will be potential in applications of drug delivery, separation, and biotechnology. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1292–1297, 2009     

Side chain liquid crystal poly(fumarate)s bearing tolane‐based mesogens

Cyanotolane or fluorotolane mesogens were for the first time introduced into the fumarate monomer under basic conditions. All fumarate monomers undergo radical polymerization in benzene in the presence of dimethyl 2,2′‐azobis(isobutyrate) as an initiator at 60 °C, affording the corresponding poly(fumarate)s with a molecular weight (M_n) of ～ 10⁴ and an exceptionally narrow polydispersity. The phase behaviors of the fumarate monomers and the correspoding poly(fumarate)s were comprehensively investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and X‐ray diffraction (XRD) analysis. For the fumarate monomers, fluorotolane derivatives were prone to form higher‐order liquid crystal phases such as a smectic phase, while cyanotolane derivatives tended to show a wide mesophase temperature range, depending on the alkyl chain spacer length. Very surprisingly, these features dramatically weakened when they were polymerized. The mesophase temperature ranges became narrow and completely disappeared for the poly(fumarate)s with a shorter alkyl chain spacer. A nematic phase representing lower‐order arrangements became a predominant liquid crystal phase for the poly(fumarate) carrying cyanotolane mesogens. Only the poly(fumarate) carrying fluorotolane mesogens with a longer alkyl chain spacer displayed the characteristic XRD patterns of the smectic B phase. The transient photocurrent measurements of the fumarate monomer with cyanotolane mesogens displayed a hole mobility of the order of 10^?4–10^?5 cm² V^?1 s^?1 at room temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5101–5114, 2008     

碳纳米管顶空固相微萃取测定水中的多溴联苯醚

建立了顶空固相微萃取联结气相色谱-电子捕获检测器（HS-SPME-GC-ECD）测定水中多溴联苯醚的方法。制作了多壁碳纳米管涂层固相微萃取探头。优化了萃取时间,萃取温度,搅拌速度,顶空体积,溶液的pH,离子强度及有机溶剂等影响萃取效率的各种因素。比较了室温和100 ℃顶空萃取和直接萃取的效率。结果表明,室温下直接萃取比顶空萃取的效率高2-4倍,而在100 ℃时顶空萃取比直接萃取的效率高1-8倍。除BDE-154外,无论直接萃取还是顶空萃取,100 ℃时的萃取效率均高于室温。方法的线性范围50-1600 ng/L,相关系数为0.995-0.998,5种多溴联苯醚的最低检出限（S/N=3）为1.14-16.25 ng/L,相对标准偏差（RSD%,n=5）小于10%。本方法用于真实水样的测定,回收率为74.2%-98.7%。     

Preparation and characterization of thermally stable poly(amide‐urea)s functionalized with anthraquinone chromophore

Two new diamines containing bulky anthraquinone pendant units were prepared via reactions of 1‐ and 2‐aminoanthraquinone with 3,5‐dinitrobenzoylchloride and a subsequent reduction of their nitro groups. A novel series of highly organosoluble poly(amide‐urea)s were synthesized from the reactions of the prepared diamines with various commercially available diisocyanates via a step‐growth addition reaction process in N‐methyl‐2‐pyrrolidone (NMP). The effects of two factors (time and temperature) on the reaction were studied to optimize the conditions for the preparation of high molecular weight polymers. All poly(amide‐urea)s were characterized by Fourier Transform Infrared (FTIR) and ¹H‐nuclear magnetic resonance (NMR) spectroscopies and elemental analysis. The resulting poly(amide‐urea)s had inherent viscosities in the range of 0.54–0.73 dl/g. They exhibited excellent solubility in polar solvents. The temperature for 10% weight loss of the polymers in air was all above 285°C, their residues were more than 36% at 700°C in air, and their T_g values were in the range of 148–190°C. According to the wide‐angle X‐ray diffraction (WAXD), the polymers were almost amorphous. The optical properties of poly(amide‐urea)s measured by ultraviolet–visible (UV–Vis) spectroscopy showed absorption maxima at 303–429 nm. Copyright © 2008 John Wiley & Sons, Ltd.     

Cloud point of poly(N-isopropylmethacrylamide) solutions in water: is it really a point?

Time-dependent phase separation/transition was observed in aqueous solutions of poly(N-isopropylmethacrylamide) in the temperature range 38–42°C. The time before the second phase appears is a function of temperature and may reach up to several hours.     

Synthesis of novel nematic liquid crystals containing 3,3'-dimethyl-2,2'-bipyridyl

Liquid-crystalline 3,3′-dimethyl-2,2′-bipyridyl derivatives with long 4-(alkoxyphenyl)ethynyl (-C≡C-C₆H₄-OR) groups in the 5,5′-positions were synthesized by palladium-catalysed crosscoupling reactions. The compounds exhibit exclusively nematic behaviour; for example, the hexyl derivative showed a nematic phase over the temperature range 145.2–205.0°C. On increasing the length of the terminal chain, the transition temperatures were lowered; for example, the hexadecyl derivative was nematic in the range 117.0–126.8°C.     

Synthesis of fluorene‐based high performance polymers. I. Poly(arylene thioether)s with excellent solubility and high refractive index

Several poly(arylene thioether)s ( PTEs ) containing a fluorene moiety were synthesized by the polycondensation of masked dithiols such as 9,9‐bis(4‐(N,N‐dimethyl‐S‐carbamoyl)phenyl)fluorene and various difluoroarenes. All PTEs were obtained in quantitative yields. The PTEs showed good thermal stability: the 10% weight loss temperature was over 480 °C under both nitrogen and air atmosphere by TGA, and glass temperature was within a range of 204–275 °C by DSC. Most PTEs exhibited remarkably high refractive index values in a range of 1.66–1.72 at 589 nm, whereas they had a very low degree of birefringence properties. Furthermore, the PTEs showed high solubility in ordinary organic solvents such as chloroform, N‐methylpyrrolidone, and tetrahydrofuran. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3073–3082, 2007     

Synthesis and properties of new adamantane‐based poly(ether imide)s

A new adamantane‐based bis(ether anhydride), 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]adamantane dianhydride, was prepared in three steps starting from nitrodisplacement of 4‐nitrophthalonitrile with the potassium phenolate of 2,2‐bis(4‐hydroxyphenyl)adamantane. A series of adamantane‐containing poly(ether imide)s were prepared from the adamantane‐based bis(ether anhydride) and aromatic diamines by a conventional two‐stage synthesis in which the poly(ether amic acid)s obtained in the first stage were heated stage‐by‐stage at 150–270°C to give the poly(ether imide)s. The intermediate poly(ether amic acid)s had inherent viscosities between 0.56 and 1.92 dL/g. Except for those from p‐phenylenediamine, m‐phenylenediamine, and benzidine, all the poly(ether amic acid) films could be thermally converted into transparent, flexible, and tough poly(ether imide) films. All the poly(ether imide)s showed limited solubility in organic solvents, although they were amorphous in nature as evidenced by X‐ray diffractograms. Glass transition temperatures of these poly(ether imide)s were recorded in the range of 242–317°C by differential scanning calorimetry and of 270–322°C by dynamic mechanical analysis. They exhibited high resistance to thermal degrdation, with 10% weight loss temperatures being recorded between 514–538°C in nitrogen and 511–527°C in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1619–1628, 1999     

Crystal modifications and multiple melting behavior of poly(L‐lactic acid‐co‐D‐lactic acid)

The crystal modifications and multiple melting behavior of poly(L ‐lactic acid‐co‐D ‐lactic acid) (98/2) as a function of crystallization temperature were studied by wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). It was found that the disorder (α′) and order (α) phases of poly(L ‐lactic acid) (PLLA) were formed in cold‐crystallized poly(L ‐lactic acid‐co‐D ‐lactic acid) samples at low (<110 °C) and high (≥110 °C) temperatures, respectively. A disorder‐to‐order (α′‐to‐α) phase transition occurred during the annealing process of the α′‐crystal at elevated temperatures, which proceeded quite slowly even at the peak temperature of the exotherm P_exo but much more rapidly at higher temperature close to the melting region. The presence or absence of an additional endothermic peak before the exotherm in the DSC thermograph of the α′‐crystal was strongly dependent on the heating rate, indicating that a melting process involved during the α′‐to‐α phase transition. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Synthesis and properties of noncoplanar rigid‐rod aromatic polyhydrazides and poly(1,3,4‐oxadiazole)s containing phenyl or naphthyl substituents

Two new phenyl‐ and naphthyl‐substituted rigid‐rod aromatic dicarboxylic acid monomers, 2,2′‐diphenylbiphenyl‐4,4′‐dicarboxylic acid ( 4 ) and 2,2′‐di(1‐naphthyl)biphenyl‐4,4′‐dicarboxylic acid ( 5 ), were synthesized by the Suzuki coupling reaction of 2,2′‐diiodobiphenyl‐4,4′‐dicarboxylic acid dimethyl ester with benzeneboronic acid and naphthaleneboronic acid, respectively, followed by alkaline hydrolysis of the ester groups. Four new polyhydrazides were prepared from the dicarboxylic acids 4 and 5 with terephthalic dihydrazide (TPH) and isophthalic dihydrazide (IPH), respectively, via the Yamazaki phosphorylation reaction. These polyhydrazides were amorphous and readily soluble in many organic solvents. Differential scanning calorimetry (DSC) indicated that these hydrazide polymers had glass transition temperatures in the range of 187–234 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300–400 °C. The resulting poly(1,3,4‐oxadiazole)s exhibited T_g's in the range of 252–283 °C, 10% weight‐loss temperature in excess of 470 °C, and char yield at 800 °C in nitrogen higher than 54%. These organo‐soluble polyhydrazides and poly(1,3,4‐oxadiazole)s exhibited UV–Vis absorption maximum at 262–296 and 264–342 nm in NMP solution, and their photoluminescence spectra showed maximum bands around 414–445 and 404–453 nm, respectively, with quantum yield up to 38%. The electron‐transporting properties were examined by electrochemical methods. Cyclic voltammograms of the poly(1,3,4‐oxadiazole) films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited reversible reduction redox with E_onset at ?1.37 to ?1.57 V versus Ag/AgCl in dry N,N‐dimethylformamide solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6466–6483, 2006     

Thermo- and UV Photo-Triggerable Monoolein Cubic Phase Bearing Poly(Hydroxyethyl Acrylate-co-Coumaryl Acrylate-co-Octadecyl Acrylate)

Thermo- and UV photo-triggerable monoolein (MO) cubic phases were developed by incorporating poly(hydroxyethyl acrylate-co-coumaryl acrylate-co-octadecyl acrylate) (P(HEA-CA-ODA)) in the cubic phases. P(HEA-CA-ODA)s, for which the HEA/CA/ODA molar ratio was 98.6:0:1.4, 96.7:2.0:1.3, 96.2:2.6:1.2, 95:3.8:1.2, and 92.8:6.1:1.1, calculated on the ¹H NMR spectra, were prepared by a free radical reaction. The air–water interfacial tension was inversely proportional to the CA content of the copolymer. The copolymers for which the CA content was 2.6%, 3.8%, and 6.1% exhibited their phase transition temperature in an aqueous solution in the temperature range from 25°C to 40°C. As the CA content was more, the temperature sensitivity was higher and the phase transition temperature was lower. The UV light (254 nm, 6 W)-induced dimerization degree of CA was proportional to its content in the copolymers. The release of fluorescein isothiocyanate-dextran from cubic phases containing P(HEA/CA/ODA)s was promoted by UV light irradiation, possibly due to the photo-induced collapse of the copolymer chains. The release from cubic phases incorporating copolymers, for which the CA content was 3.8% and 6.1%, was enhanced by increasing the releasing medium temperature from 23°C to 37°C, possibly due to the thermal collapse of the copolymer chains.     

Organometallic polymers. I. Synthesis of ferrocene-containing poly(phosphine oxides) and poly(phosphine sulfides)

Poly(phosphine oxides) and poly(phosphine sulfides) of ferrocene were synthesized in the melt phase. The resulting ferrocene polymers, linked by phosphorus bridges, were thermally stable and infusible solids, of low molecular weight (M?_n < 4000). Phenyldichlorophosphine, phenyldichlorophosphonate, and phenylphosphonothioic dichloride were copolymerized with ferrocene in the melt phase (80–110°C.) with ZnCl₂ as a catalyst. As the polymerization temperature was raised, cleavage of cyclopentadiene rings from iron became more pronounced, and cyclopentane-bridged polymers of ferrocene were produced in competition with the ferrocene–phosphorus polymers. The cleavage-polymerization process became predominant at 140°C. The structures of poly(phosphine oxides) (and sulfides) of ferrocene were verified by infrared and nuclear magnetic resonance spectroscopy.