Capillary zone electrophoresis of aldoses,ketoses and uronic acids derivatized with ethylp-aminobenzoate

Summary A number of mono- and oligosaccharides derivatized with ethylp-aminobenzoate have been separated as their borate complexes by capillary zone electrophoresis, using a fused silica capillary containing 175 mM borate buffer, pH 10.5, as carrier. The derivatized carbohydrates were sufficiently separated within 17 min at an applied voltage of 25 kV. On-column UV monitoring allowed detection of these derivatives at the 10 fmol level, and quantification by the relative peak area method allowed reproducible determination of the saccharides at least in the concentration range of 0.5–20 mM in reaction solutions. This method has been applied to the determination of the monosaccharide compositions of polysaccharides extracted from Flos matricariae and Radix althaeae.     

Capillary electrophoresis separation of human milk neutral and acidic oligosaccharides derivatized with 2‐aminoacridone

Human milk is a unique fluid in glycobiology due to the presence of many free structurally complex oligosaccharides emerging as important dietary factors during early life and having many biological and protective functions. Methods that allow accurate profiling of oligosaccharide mixtures in this complex biological fluid with quantification of the four known genetically determined groups are welcomed. A high‐voltage CE separation and detection at 254 nm of 17 neutral and acidic human milk oligosaccharide (HMO) standard along with lactose derivatized with 2‐aminoacridone, using a BGE containing 20% methanol as an organic modifier and borate, able to form on‐capillary anionic borate‐polyol complexes, is reported. This CE approach was able to separate both neutral HMOs and acidic HMOs, with the sialic acid residue, also in the presence of lactose in high content. This method was applied to the four secretory groups individually extracted by a rapid and simple preparative step. LODs were found ranging from ～50 to 700 fmol. We were able to measure HMO content also in the presence of excess fluorophore, or interference from proteins, peptides, salts, and other impurities normally present in this complex biological fluid. Overall, CE equipped with a UV detector is a common analytical approach and this simple CE separation offers high resolution and sensitivity for the differentiation of human milk samples related to genetic groups and days of lactation by considering that important changes in HMO content are a reflection of the lactation day.     

Capillary zone electrophoresis of histidine-containing compounds

Capillary zone electrophoresis has been tested for the separation of angiotensins, cationic heptapeptides and model histidine derivatives. Good separation efficiencies are seen for peptides and model compounds with negative to small positive net charges. For net charge greater than +2, addition of putrescine to pH 6 buffer greatly suppresses ion exchange at anionic sites on fused silica. When operating at pH values where histidine groups are neutral, addition of Zn2+ allows separations based on metal, rather than proton, binding. Separation efficiencies and relative migration times are dependent on capillary length when ion-exchange behavior occurs.     

Capillary zone electrophoresis for analysis of phytochelatins and other thiol peptides in complex biological samples derivatized with monobromobimane

A new method to improve the analysis of phytochelatins and their precursors (cysteine, gamma-Glu-Cys, and glutathione) derivatized with monobromobimane (mBrB) in complex biological samples by capillary zone electrophoresis is described. The effects of the background electrolyte pH, concentration, and different organic additives (acetonitrile, methanol, and trifluoroethanol) on the separation were studied to achieve optimum resolution and number of theoretical plates of the analyzed compounds in the electropherograms. Optimum separation of the thiol peptides was obtained with 150 mM phosphate buffer at pH 1.60. Separation efficiency was improved when 2.5% v/v methanol was added to the background electrolyte. The electrophoretic conditions were 13 kV and capillary dimensions with 30 cm length from the inlet to the detector (38 cm total length) and 50 microm inner diameter. The injection was by pressure at 50 mbar for 17 s. Under these conditions, the separation between desglycyl-peptides and phytochelatins was also achieved. We also describe the optimum conditions for the derivatization of biological samples with mBrB to increase electrophoretic sensitivity and number of theoretical plates. The improved method was shown to be simple, reproducible, selective, and accurate in measuring thiol peptides in complex biological samples, the detection limit being 2.5 microM glutathione at a wavelength of 390 nm.     

Capillary zone electrophoresis and polymer dynamics

Capillary electrophoresis with a polymer solution support medium is a well-established powerful analytical tool. This paper discusses a possible alternative application of capillary electrophoresis, namely a path for studying the dynamics of polymer solutions. The key to the approach is an inversion of perspective. Instead of treating the migrating species as the object of experimental importance and the support medium as being of importance only because it facilitates separations, one treats the polymer solution as being of experimental importance, and the choice of migrating species as being of interest only because different species may probe different aspects of polymer dynamics.     

Capillary electrophoresis of acidic oligosaccharides from human milk

Interest in defining the array of oligosaccharides of human milk has been increasing. Pathogens that bind glycans on their host mucosal surfaces may be inhibited by human milk oligosaccharides. It has been postulated that acidic oligosaccharides in human milk may inhibit binding by pathogens that bind acidic glycans in the gut, but testing this hypothesis requires their reliable quantification in milk. Sialyloligosaccharides of human milk have been quantified by HPLC and CE. A recent CE technique uses the MEKC mode with direct detection at 205 nm to resolve and quantify, in the native form, the 12 most dominant sialyloligosaccharides of human milk in a single 35-min run. The method gives a linear response from 39 to 2500 microg/mL with a coefficient of variation between 2 to 9% and accuracy from 93 to 109%. This was used to detect variation in expression of specific sialyloligosaccharides in milk. Individual sialyloligosaccharide concentrations in milk differ among individual donors and between less and more mature milk. Thus, CE can be used to measure variation in sialyloligosaccharide expression in milk, and thereby test the relationship of this variation-to-variation in risk of specific diseases in breastfed infants.     

Capillary zone electrophoresis of natural organic matter

This paper presents an in-depth look at the use of capillary electrophoretic (CE) techniques for the fingerprinting and characterization of humic substances and natural organic matter. These materials are highly heterogeneous in structure and show all characteristics of mixtures unliked in analytical chemistry. The electrophoretic approach, however, allows the determination of mobility distributions in different solution conditions, representative of the effective charge and size distribution status of the components present. A tabulated review covers over 50 references on the subject and highlights the possibilities and problems encountered in the analysis of such polydisperse materials with CE methods. In a second part of the article the consequences of experimental and buffer parameters on the behavior of humic materials in CE are presented.     

Capillary zone electrophoresis for polymide composition analysis

Capillary zone electrophoresis (CZE) was employed in polyimide composition analysis. Polymide was decomposed to its corresponding aromatic diamine and aromatic acid monomers by an alkali fusion reaction. Sample treatment is much simpler than published methods, and electropherograms show a good separation of decomposed products under the proper conditions.     

Capillary zone electrophoresis separation of enantiomers of lisuride

Lisuride is an ergot alkaloid derivative with dopaminergic activity. It is used for treatment of Parkinsonism and some other diseases associated with high level of prolactine. Lisuride is a chiral compound derived from natural ergot alkaloids. A new capillary zone electrophoresis (CZE) method capable of separating the enantiomers of lisuride was developed. Using the optimized conditions (acidic electrolyte with the addition of gamma-cyclodextrin (gamma-CD)) as low as 0.02% of undesirable L-lisuride can be detected. Selected method characteristics, i.e., linearity (0-20 mg/l), precision (2.0% at 5 mg/I), and accuracy (101 +/- 4% at 5 mg/l) were evaluated. The optimized method was applied for the analysis of real batches of Lisuride hydrogenmaleate and Lisuride base manufactured by IVAX Pharmaceuticals. It was found that they contain less than 0.02% of undesirable L-enantiomer.     

Capillary zone electrophoresis of lipoarabinomannan by multi-layered concentration

The present article describes a capillary zone electrophoresis method which relies on a multilayered water-alkali solvent stacking with online ionization to enhance detection of mannose, arabinose, and their oligosaccharides, which are used as the migration profile standards but are also the distinctive structural components of lipoarabinomannan. Lipoarabinomannan is detected in patients having tuberculosis. The capillary electrophoresis method with ionization of the whole saccharides without degradation in alkaline solution inside the capillary is based on the structural deprotonation of the molecules under ultrahigh pH conditions. The validation of the capillary electrophoresis parameters revealed that the 15-fold electrolyte–water-injection plug allowed detection of one-third lower concentrations than detected without online concentration. For the first time, the better detectability was seen especially for highly polymerized, but otherwise poorly ionized, arabinooctaose. The applicability of the method for detecting whole large biological saccharide complexes was confirmed by the glycolipid lipoarabinomannan. For the first time also, the migration of the indestructible lipoarabinomannan was detected together with oligosaccharides used representing the capping units, namely mannose, mannobiose, and mannotriose. The myo-inositol-phosphate-lipid unit was seen to migrate separately from the arabinomannan, since it was hydrolyzed from one lipoarabinomannan product under alkaline conditions in capillary electrophoresis.     

Capillary zone electrophoresis of linear and branched oligosaccharides

The electrophoretic behavior of derivatized linear and branched oligosaccharides from various sources was examined in capillary zone electrophoresis with polyether-coated fused-silica capillaries. Two UV-absorbing (also fluorescent) derivatizing agents (2-amino-pyridine and 6-aminoquinoline) were utilized for the electrophoresis and sensitive dtection of neutral oligosaccharides, e.g., N-acetylchitooligosaccharides, high-mannose glycans and xyloglucan oligosaccharides. The oligosaccharides labelled with 6-aminoquinoline yielded eight times higher signal than those tagged with 2-aminopyridine. Plots of logarithmic electrophoretic mobilities of labelled N-acetylchitooligosaccharides with 6-aminoquinoline or 2-aminopyridine versus the number of sugar residues in the homologous series yielded straight lines in the size range studied, the slopes of which were independent of the tagging functions. The slopes of these lines are referred to as the N-acetylglucosaminyl group mobility decrement. The oligosaccharides were better resolved in the presence of tetrabutylammonium bromide in the running electrolyte. Furthermore, the electrophoretic mobilities of branched oligosaccharides were indexed with respect to linear homooligosaccharides, an approach that may prove valuable in correlating and predicting the mobilities of complex oligosaccharides.     

瑞香狼毒多糖中单糖组成的毛细管区带电泳分析

采用1-苯基-3-甲基-5-吡唑啉酮(PMP)和1-(2-萘基)-3-甲基-5-吡唑啉酮(NMP)为衍生试剂,以反相高效液相色谱(RP-HPLC)和毛细管区带电泳(CZE)法对9种单糖衍生物进行了分离研究,对比确定了NMP衍生化CZE法在植物多糖单糖组成分析中的优越性。以NMP为柱前标记试剂,建立了毛细管区带电泳定量测定9种单糖的新方法。方法具有较好的重复性(相对标准偏差RSD小于4.3%),单糖衍生物检测限为0.85～1.6μmol/L,回收率为96.4%～104%。已应用于瑞香狼毒多糖样品的单糖组成分析。     

Capillary zone electrophoresis study of cyclodextrin--lipoic acid host-guest interaction

Lipoic acid is a naturally occurring compound which is being widely investigated for its therapeutic effects in the treatment or prevention of a variety of diseases associated with oxidative injury, particularly diabetes. The diversity of therapeutic applications of lipoic acid requires an appropriate formulation to control its bioavailability, site-targeting delivery and to overcome its inherent chemical instability. In this regard, cyclodextrins (CDs) are ideally suitable due to their well-documented ability to include in their cavity proper guest molecules and protect them from physical or chemical damages. Lipoic acid forms 1:1 inclusion complexes with betaCD as shown in a previous report of an extended investigation that also indicated the suitability of capillary zone electrophoresis (CZE) for the study of such host-guest interactions. In view of these possible applications, we extended the CZE analysis to determine the strength of binding, in a pH 9 phosphate buffer, of lipoic acid with other CD derivatives such as alphaCD, gammaCD and the alkylated derivatives of betaCD, namely (2-hydroxypropyl)-beta-CD (HPbetaCD), and heptakis(2,3,6-tri-O-methyl)-beta-CD (TMbetaCD). Once established that the easily available betaCD is the most suitable receptor for lipoic acid, we set up and here describe a simple and reliable procedure for the quantitative determination of lipoic acid in commercial dietary supplement tablets containing also other active substances and excipients.     

Capillary zone electrophoresis for the characterization of latex particles

Capillary zone electrophoresis (CZE) was applied to the separation of acrylic styrene copolymer emulsion particles. Fast separations could be performed on samples containing chemically identical latex particles of different size, as well as on samples with particles of the same size but differing in chemical composition. The developed method was also used for the analysis of water soluble fractions of urethane dispersions. Additionally, the physical interaction between different particles (e.g., acrylic and urethane particles) could be studied using this method. The separation mechanism is based on the zeta potential of the particles and the relaxation effect under the applied analytical conditions.     

Capillary zone electrophoresis in laboratory-made fluorinated ethylene propylene capillaries

Capillaries made of fluorinated ethylene propylene (FEP) with an inner diameter of 50 microm have been employed in capillary zone electrophoresis with UV-Vis absorbance detection. The capillaries were made in the laboratory with a recently developed technique using fluoropolymer heat shrink/melt tubing and a tungsten wire as a template for the channel. An electroosmotic flow was obtained in the channels and it is shown that an FEP capillary is more effective for a cationic test solute than a fused-silica capillary. The compatibility of FEP capillaries with optical detection is evaluated briefly.     

Capillary zone electrophoresis on chemically bonded imidazolium based salts

In the present paper, fused-silica capillaries were chemically modified with an analogue of the imidazole-based ionic liquid and zwitterionic salt. The coated capillaries were examined for the behavior of the electroosmotic flow in both aqueous and non-aqueous electrolytes. The electroosmotic flow in the capillary coated with an ionic liquid analogue was found to be anodic (reversed) and dependent on the pH of the separation buffer. In the case of a zwitterionic capillary, the electroosmotic flow was cathodic and its velocity remained almost constant in the pH range of 4-7. The zeta-potentials of the modified surfaces were also calculated. The effectiveness of coating was investigated by comparing a separation of five inorganic ions and seven alkylphosphonic acids/monoesters in the modified and uncoated capillaries. All separations were successfully carried out in simple buffers and completed during a short analysis time. Finally, the run-to-run and day-to-day reproducibility of the coated capillaries in terms of the migration time of a neutral marker was determined.     

Capillary zone electrophoresis for the analysis of glycoforms of cellobiohydrolase

Cellobiohydrolase (CBH) is an important enzyme for the conversion of lignocellulosic biomass to ethanol. This work separated the glycoforms of CBH possessing different numbers of neutral mannoses using capillary zone electrophoresis (CZE) in a 50 mM, pH 7.5 phosphate buffer. The method analysed CBH in an intact form using a polyacrylamide coated fused silica capillary without requiring additives or labelling of the enzyme. The migration time of the major peak was found to be 21.6±0.1 min (n=3) and the approach is suitable for testing of batch-to-batch consistency of CBH. Ease-of-use, automation and speed are the other benefits due to which the use of CZE for analysing glycoforms of CBH was concluded to be ideal.     

Capillary zone electrophoresis of graphene oxide and chemically converted graphene

The preparation of processable graphene oxide colloids called chemically converted graphene (CCG) involves the following steps: oxidation of graphite to form graphite oxide; exfoliation of graphite oxide to form graphene oxide (GO); and reduction of GO to form CCG. In this work, the exfoliation and reduction steps were monitored by capillary zone electrophoresis (CZE). CZE was performed in fused silica capillaries with UV absorbance at 230 nm (GO) and 270 nm (CCG) using 250 μM tetrapropylammonium hydroxide (pH 10.4). The results indicate that almost complete exfoliation of graphite oxide (0.05 wt%) and higher recovery of CCG were obtained by sonication at 50% power for more than 15 h. CZE is considered a valuable tool for the fractionation and analysis of GO nanoparticles and, hence, for the control of different steps in preparation of CCG.     

Capillary zone electrophoresis of humic acids from the American continent

A multicomponent background electrolyte (BGE) was developed and its composition optimized using artificial neural networks (ANN). The optimal BGE composition was found to be 90 mM boric acid, 115 mM Tris, and 0.75 mM EDTA (pH 8.4). A separation voltage of 20 kV, 20 degrees C and detection at 210 nm were used. The method was applied to characterize several humic acids originating from various countries of the American continent: soil (Argentina), peat (Brazil), leonardite (Guatemala and Mexico) and coal (United States). Comparison with humic acids of International Humic Substances Society (IHSS) standard samples was also done. Well reproducible electropherograms showing a relatively high number of peaks were obtained. Characterization of the samples by elemental analysis and UV spectrophotometry was also done. In spite of the very different origins, the similarities between humic acids are high and by matrix assisted desorption/ionization-time of flight (MALDI-TOF)-mass spectrometry it was shown that most of the m/z patterns are the same in all humic acids. This means that humic acids of different origin have the same structural units or that they contain the same components.