Simultaneous determination of bisphenol A and its halogenated derivatives in river water by combination of isotope imprinting and liquid chromatography-mass spectrometry

A restricted access media-molecularly imprinted polymer (RAM-MIP) for [2H16]bisphenol A (BPA-d16) was prepared by a multi-step swelling and polymerization method using 4-vinylpyridine as a functional monomer and ethylene glycol dimethacrylate as a cross-linker, followed by hydrophilic surface modification using glycerol dimethacrylate and glycerol monomethacrylate as hydrophilic monomers. The obtained RAM-MIP showed excellent molecular recognition abilities for BPA and BPA-d6 as well as BPA-d16 used as the template molecule, and good ones for tetrachlorobisphenol A (Cl4-BPA) and tetrabromobisphenol A (Br4-BPA). Next, the RAM-MIP was utilized for selective on-line pretreatment and enrichment of BPA, Cl4-BPA and Br4-BPA in a river water sample, followed by their separation and determination by LC-MS. The calibration graphs of BPA, Cl4-BPA and Br4-BPA, constructed using BPA-d6 as an internal standard, showed good linearity in the range of 12.5-200 pg/mL (r > 0.999) with a 2-mL injection of a river water sample. The inter-day precision data for the assay of BPA, Cl4-BPA and Br4-BPA at 25 pg/mL were 1.08, 3.67 and 1.58%, respectively. Furthermore, this method was successfully applied for the simultaneous determination of BPA and its halogenated derivatives in river water.     

Preparation and binding study of solid-phase microextraction fiber on the basis of ametryn-imprinted polymer: Application to the selective extraction of persistent triazine herbicides in tap water,rice, maize and onion

A monolithic ametryn molecular-imprinted polymer based on a simple polymerization method was fabricated for use as new solid-phase microextraction (SPME) fiber, which can be coupled with GC and GC/MS for selective extraction and analysis of triazine herbicides. Methacrylic acid (MAA), ethylene glycol dimethacrylate (EDMA) and ametryn bear role of functional monomer, cross-linker and template, respectively. In the optimized conditions the fabricated fiber showed better molecular recognition abilities for methylthiotriazine herbicides than chloro-triazine herbicides. By use of bi-Langmuir isotherm model the evaluated equilibrium constants for ametryn were 0.01 and 890.69 μM⁻¹, and the numbers of binding sites were 129.98 and 5.82 nmol g⁻¹, respectively. The high extraction efficiency was obtained for ametryn, prometryn, terbutryn, atrazine, simazine, propazine, and cyanazine, yielding the detection limits of 14, 28, 45, 56, 85, 95 and 74 ng mL⁻¹, respectively by GC with flame ionization detection. The reliability of the prepared fiber for extraction of ametryn and other analogues in real samples has been investigated and proved by using spiked samples such as tap water, rice, maize, and onion.     

Evaluation of new selective molecularly imprinted polymers prepared by precipitation polymerisation for the extraction of phenylurea herbicides

Three different molecularly imprinted polymers (MIPs) have been prepared by precipitation polymerisation using linuron (LIN) or isoproturon (IPN) (phenylurea herbicides) as templates and methacrylic acid (MAA) or trifluormethacrylic acid (TFMAA) as functional monomers. The ability of the different polymers to selectively rebind not only the template but also other phenylurea herbicides has been evaluated. In parallel, the influence of the different templates and functional monomers used during polymers synthesis on the performance of the obtained MIPs was also studied through different rebinding experiments. The experimental binding isotherms were fitted to the Langmuir-Freundlich isotherm allowing to describe the kind of binding sites present in the imprinted polymers under study. It was concluded that TFMAA-based polymer using IPN as template presents the best properties to be used as a selective sorbent for the extraction of phenylurea herbicides.     

Preparation and Characterization of Prometryn Molecularly Imprinted Solid‐Phase Microextraction Fibers

Abstract

A novel reproducible solid‐phase microextraction (SPME) coating was prepared on the surface of silanized silica fibers by molecularly imprinted polymerization using prometryn as template molecule. The structure and extraction performance of molecularly imprinted polymer (MIP) coating was studied with the scanning electron microscope and high performance liquid chromatography (HPLC). Specific selectivity was found with the prometryn MIP‐coated fiber to prometry and its structural analogues such as atrazine, simetryn, terbutylazin, ametryn, propazine and terbutryn. In contrast, these triazines could not be selectively extracted by the non‐imprinted polymer fiber or commercial polydimethylsiloxane (PDMS), polydimethylsiloxane/divinylbenzene (PDMS/DVB), polyacrylate (PA) fibers.     

Preparation and application of simetryn‐imprinted nanoparticles in triazine herbicide residue analysis

This work provides a simple and rapid method for synthesis uniform simetryn imprinted nanoparticles, which can be used to pretreat the tested samples before detecting. A series of computational approach were employed for design simetryn‐imprinted polymer. Based on the conclusion of theoretical calculation, the simetryn imprinted nanoparticles were synthesized using simetryn as template, methacrylic acid as monomer with different solvent volume and synthesis conditions. The obtained nanoparticles have small size, uniform distribution and high imprinted factor. Scatchard analysis and quantum chemical calculations were applied for evaluating the interaction of simetryn with methacrylic acid in the imprinting process. The selectivity and recognition ability of the simetryn imprinted nanoparticles for six triazine herbicides and two other type herbicides were investigated. The results show that the simetryn imprinted nanoparticles had high selectivity and binding capacity and could be used for the separation and enrichment of four triazine pesticide residues from actual samples. A method of molecularly imprinted matrix solid phase extraction ultra‐performance liquid chromatography tandem mass spectrometry was established for detecting four kinds of triazine herbicide residues in tobacco. The recovery rate of terbuthylazine, simetryn, atrazine, and prometryn in tobacco was 84.03–119.05%, and the relative standard deviation was 0.35–10.12%.     

Microextraction by packed sorbent liquid chromatography with time‐of‐flight mass spectrometry of triazines employing a molecularly imprinted polymer†

Molecularly imprinted polymers for the determination of triazines were synthesized by precipitation using atrazine as template, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as crosslinker, and 2,2′‐azobisisobutrynitrile as initiator. The polymers were characterized by infrared spectroscopy and scanning electron microscopy and packed in a device for microextraction by packed sorbent aiming for the preconcentration/cleanup of herbicides, such as atrazine, simazine, simetryn, ametryn, and terbutryn in corn samples. Liquid chromatography coupled with time‐of‐flight mass spectrometry was used for the separation and determination of the herbicides. The selectivity coefficient of molecularly imprinted polymers was compared with that of nonimprinted polymer for the binary mixtures of atrazine/propanil and atrazine/picloram, and the values obtained were 15.6 and 2.96, respectively. The analytical curve ranged from 10 to 80 μg/kg (r = 0.989) and the limits of detection and quantification in the corn matrices were 3.3 and 10 μg/kg, respectively. Intra‐ and interday precisions were < 14.8% and accuracy was better than 90.9% for all herbicides. Polymer synthesis was successfully applied to the cleanup and preconcentration of triazines from fortified corn samples with 91.1–109.1% of recovery.     

Determination of triazine herbicides in human body fluids by solid-phase microextraction and capillary gas chromatography

Summary Eight triazine herbicides, prometon, propazine, atrazine, simazine, prometryn, ametryn, metribuzin, and cyanazine, have been extracted from human whole blood and urine samples by headspace solid-phase microextraction (SPME) with a polydimethylsiloxane-coated fiber and quantified by capillary gas chromatography with nitrogen-phosphorus detection. Extraction efficiencies for all compounds were 0.21–0.99% for whole blood, except for cyanazine (0.06%). For urine, the extraction efficiencies for prometon, propazine, atrazine, prometryn and ametryn were 13.6–38.1%, and those of simazine, metribuzin and cyanazine were 1.35–8.73%. The regression equations for the compounds extracted from whole blood were linear within the concentration ranged 0.01–1 μg (0.5 mL)⁻¹ for prometon, propazine, atrazine, prometryn, and ametryn, and 0.02–1 μg (0.5 mL)⁻¹ for simazine, metribuzin, and cyanazine. For urine, regression equations for all compounds were linear within the concentration range 0.005–0.25 μg mL⁻¹. Compound detection limits were 2.8–9.0 ng (0.5 mL)⁻¹ and 0.4–2.0 ng mL⁻¹ for whole blood and urine, respectively. The coefficients of within-day and day-to-day variation were satisfactory for all the compounds, and not greater than 10.3 and 14.2%, respectively. Data obtained from determination of atrazine in rat whole blood after oral administration of the compound are also presented.     

Development and characterisation of a molecularly imprinted polymer prepared by precipitation polymerisation for the determination of phenylurea herbicides

New materials based on molecularly imprinted polymers (MIPs) have been developed for use as sorbents in solid phase extraction to preconcentrate some urea herbicides. In the preconcentration step, different molecularly imprinted polymers were tested using methacrylic acid (MAA) and 2-(trifluoromethyl)acrylic acid (TFMAA) as functional monomers, and linuron and isoproturon as templates. The best results were obtained when the polymer was synthesised using MAA with isoproturon as template. Another parameter evaluated was the way in which the polymer was obtained. We observed that the imprinted polymers obtained by precipitation displayed a greater capacity to retain the phenylureas. Studies conducted using scanning electron microscopy (SEM) revealed that the bulk polymerisation method is far from ideal owing to the random shape and size distribution of the particles obtained, whereas when polymerisation was carried out in precipitation microspheres were obtained. In order to confirm the interaction between the functional monomer and the template, 1H NMR (CD2Cl2) analyses were conducted. The results obtained suggest that the hydrogen and/or nitrogen of the amino group of the template would be involved in the formation of hydrogen bonds with the functional monomer. The imprinted polymer obtained by precipitation polymerisation with MAA as functional monomer and isoproturon as template can be applied to preconcentrate phenylureas when the sample is dissolved in toluene. The proposed methodology was employed to evaluate polymer selectivity towards humic acids and towards other herbicides.     

A DNA-electrochemical biosensor for screening environmental damage caused by s-triazine derivatives

An electrochemical DNA-biosensor has been used to investigate the interactions between DNA and members of a group of ten derivatives of 1,3,5-triazine herbicides: chloro-s-triazines (atrazine, propazine, terbutylazin, and cyanazin), thiomethyl-s-triazines (ametryn, prometryn, terbutryn, and simetryn), and methoxy-s-triazines (prometon and terbumeton). A UV spectrophotometric study of this group of herbicides was also undertaken. Of this group only cyanazin could be oxidized in aqueous solution using a glassy carbon electrode. Use of the electrochemical DNA-biosensor revealed the occurrence of a time-dependent interaction of all the herbicides with DNA, via the appearance of guanine, guanosine, and adenosine oxidation signals that correspond to DNA damage. Adduct formation between the herbicide and the DNA purine bases guanine and adenine is suggested as a mechanism.     

替米考星分子印迹聚合物的制备及其固相萃取研究

以泰乐菌素为虚拟模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了对替米考星具有高选择性的分子印迹聚合物。考察了二甲基甲酰胺、甲醇、丙酮和氯仿4种致孔剂对合成聚合物性能的影响。通过正交实验优化的聚合配方为:1.0mmol泰乐菌素,8.0mmol甲基丙烯酸,20.0mmol乙二醇二甲基丙烯酸酯,6.0mL氯仿,20.0mg偶氮二异丁腈。研究了将该聚合物作为固相萃取填料分离、富集替米考星的萃取条件和萃取性能。当萃取柱依次用甲醇和水(pH9.0)活化,乙腈溶液上样,甲醇和氯仿分别洗涤,3mL氨化甲醇(95:5,V/V)洗脱时,替米考星在分子印迹固相萃取柱上的回收率达到90%以上,而非分子印迹固相萃取柱的回收率仅为32%。     

Restricted access media-molecularly imprinted polymer for propranolol and its application to direct injection analysis of beta-blockers in biological fluids

A restricted access media-molecularly imprinted polymer (RAM-MIP) for propranolol (PRP) has been prepared for direct injection analysis of beta-blockers in biological fluids. First, the MIP for PRP was prepared using methacrylic acid and ethylene glycol dimethacrylate as the functional monomer and cross-linker, respectively, by a multi-step swelling and polymerization method. Next, a 1:1 mixture of glycerol monomethacrylate and glycerol dimethacrylate was used for hydrophilic surface modification, and added directly to the MIP for PRP after 4 h from the start of polymerization. Then further polymerization was carried out for 20 h. The obtained RAM-MIP for PRP showed excellent molecular recognition ability for PRP, good ones for alprenolol (ALP) and pindolol, and fair ones for other beta-blockers. The RAM-MIP was applied for direct injection analysis of ALP enantiomers in a rat plasma sample by a column-switching HPLC system using a beta-cyclodextrin phenylcarbamate-bonded silica column as the analytical column. The calibration graph, constructed from peak area versus each ALP enantiomer concentration, was linear with a correlation coefficient of > 0.999 over the concentration ranges of 12.5-250 ng ml(-1). The limit of quantitation was 12.5 ng ml(-1) with a 50 microl injection. This method could be applicable for the assay of ALP enantiomers at the therapeutic plasma levels, and have wide applicability for the assay of beta-blockers in biological fluids.     

Application of liquid phase microextraction based on solidification of floating organic drop for the determination of triazine herbicides in soil samples by gas chromatography with flame photometric detection

A simple and efficient liquid phase microextraction based on solidification of floating organic drop coupled with gas chromatography–flame photometric detection was developed for the extraction and determination of some triazine herbicides (metribuzin, simetryn, ametryn and prometryn) in soil samples. The type and volume of the extraction solvent, sample solution temperature, salt addition, stirring rate, and the extraction time were optimized. Under the optimal conditions, the linear response was observed over the range of 10–2000?µg?kg^?1 for metribuzin and 2–500?µg?kg^?1 for simetryn, ametryn, and prometryn, respectively, with the correlation coefficients (r) varying from 0.9990 to 0.9992. The limits of detection were in the range between 0.2 and 1.0?µg?kg^?1 (S/N?=?3?:?1). The recoveries of the target analytes for the spiked soil samples ranged from 75.5% to 97.3%, with the relative standard deviation values less than 7.2% (n?=?5). The enrichment factors were achieved ranging from 122 to 336. The developed method was applied for the preconcentration and determination of triazine herbicides in real soil samples and a satisfactory result was obtained.     

Theoretical Researches on the Recognizing Characteristics of Atrazine Imprinted Polymers with Different Functional Monomers

As a widely used herbicide, the threat of atrazine to both environment and health of people has become the focus. Therefore, the research and analysis of atrazine are getting more important. In this work, the MIT was used to detect atrazine theoretically. Atrazine was taken as a template molecule. MAA, MMA and TFMAA were taken as the functional monomers, respectively. The geometry optimization, the nature of hydrogen bonds, the NBO charge, and the binding energies of the imprinted molecule with the functional monomers were investigated at the B3LYP/6-31g(d,p) level. Results indicated that atrazine had the strongest interaction with TFMAA. When the ratio of atrazine and TFMAA was 1:6, the amount of H-bond formed from atrazine and TFMAA was the largest. Moreover, TFMAA owned the largest binding energy with atrazine while MMA owned the smallest. The study is helpful to interpret experiment phenomena of molecular imprinting and select better functional monomers.     

L-卡尼丁分子压印聚合物作为手性分离色谱固定相的研究

以L－卡尼丁为模板分子，分别以α－甲基丙烯酸和丙烯酰胺为功能单体，乙二醇二甲基丙烯酸酯为 剂，采用分子压印技术合成了对L－卡尼丁具有高选择性的分子压印聚合物。将所得聚合物用作高效液相色谱固定相，研究了它们对外消旋卡尼丁盐酸盐的拆分能力，分析结果表明，α－甲基丙烯酸作为功能单体所得聚合物对外消旋卡尼丁盐酸盐具有良好的拆分作用，其分离因子α为1．89。     

莠去津分子印迹聚合物的合成及其吸附性能

以莠去津(1)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,在偶氮二异丁腈(AIBN)的引发下,于65℃聚合17 h合成了对1有特异识别性能的分子印迹聚合物(2)。用紫外分光光度法探索了1与MAA的最佳比例,研究了2的吸附性能力,并利用高效液相色谱法对2的选择性进行了考察。用Scatchard法分析表明,2通过氢键作用力结合,存在两种结合位点,对1的吸附存在两种形态,最大表观吸附量(Qmax,1)为130.9 nmol.g-1,平衡离解常数(Kd,1)为30.8 nmol.L-1,Qmax,2为540.5 nmol.g-1,Kd,2为450.5 nmol.L-1。与西玛津相比,2对1显示出一定的选择性。以2作为填料制备出具有莠去津分子印迹的固相萃取柱,可对水质中2×10-8mol.L-1以下的待测物进行富集和分离,回收率近90%。     

Graphene‐coated fiber for solid‐phase microextraction of triazine herbicides in water samples

Graphene is a novel and interesting carbon material that could be used for the separation and purification of some chemical compounds. In this investigation, graphene was used as a novel fiber‐coating material for the solid‐phase microextraction (SPME) of four triazine herbicides (atrazine, prometon, ametryn and prometryn) in water samples. The main parameters that affect the extraction and desorption efficiencies, such as the extraction time, stirring rate, salt addition, desorption solvent and desorption time, were investigated and optimized. The optimized SPME by graphene‐coated fiber coupled with high‐performance liquid chromatography‐diode array detection (HPLC‐DAD) was successfully applied for the determination of the four triazine herbicides in water samples. The linearity of the method was in the range from 0.5 to 200 ng/mL, with the correlation coefficients (r) ranging from 0.9989 to 0.9998. The limits of detection of the method were 0.05‐0.2 ng/mL. The relative standard deviations varied from 3.5 to 4.9% (n=5). The recoveries of the triazine herbicides from water samples at spiking levels of 20.0 and 50.0 ng/mL were in the range between 86.0 and 94.6%. Compared with two commercial fibers (CW/TPR, 50 μm; PDMS/DVB, 60 μm), the graphene‐coated fiber showed higher extraction efficiency.     

Determination of triazine herbicides in environmental samples by dispersive liquid-liquid microextraction coupled with high performance liquid chromatography

A simple, rapid, efficient, and environmentally friendly method for the determination of five triazine herbicides in water and soil samples was developed by using dispersive liquid-liquid microextraction (DLLME), coupled with high performance liquid chromatography-diode array detection (HPLC-DAD). The water samples were directly used for DLLME extraction. For soil samples, the target analytes were first extracted by water-methanol (99:1, v/v). In the DLLME extraction method, chloroform was used as an extraction solvent, and acetonitrile as a dispersive solvent. Under the optimum conditions, the enrichment factors of DLLME were in the range between 183-221. The linearity of the method was obtained in the range of 0.5-200 ng/mL for the water sample analysis, and 1-200 ng/g for the soil samples, respectively. The correlation coefficients ranged from 0.9968 to 0.9999. The limits of detection were 0.05-0.1 ng/mL for the water samples, and 0.1-0.2 ng/g for the soil samples. The proposed method has been successfully applied to the analysis of target triazine herbicides (simazin, atrazine, prometon, ametryn, and prometryn) in water and soil samples with satisfactory results.     

三唑酮分子印迹预组装体系的分子模拟与吸附性能

以三唑酮为模板分子, 以丙烯酰胺(AM)、 丙烯酸(AA)、 甲基丙烯酸(MAA)和三氟甲基丙烯酸(TFMAA)为功能单体预组装了分子印迹聚合物体系, 采用半经验法和从头算法, 利用Hyperchem软件模拟了三唑酮与4种功能单体所组成的分子印迹预组装体系的构型、 能量、 反应配比及复合反应的结合能, 选择复合物结合能最高的功能单体用于分子印迹聚合物的合成. 采用密度泛函方法计算了模板与单体在不同致孔剂中的溶剂化能. 结果表明, 三唑酮与三氟甲基丙烯酸所形成复合物的作用力最强, 在非极性溶剂中溶剂化能最弱. 由预组装体系的差示紫外光谱法研究发现, 一分子三唑酮可与两分子三氟甲基丙烯酸在氯仿中形成氢键复合物, 与分子模拟的结果一致. 在最佳模拟条件下, 合成了三唑酮的印迹聚合物, 利用吸附等温线Langmuir和Freundlich模型研究了印迹聚合物的吸附行为及识别机理. 上述方法对于分子印迹体系的筛选及分子印迹聚合物性能的预测有重要的意义.     

Chiral recognition and separation of beta2-amino acids using non-covalently molecularly imprinted polymers

Non-covalently molecularly imprinted polymers (MIPs) for beta2-amino acids were prepared for the first time. N-(2-chlorobenzyloxycarbonyl)-(R)-beta2-homophenylalanine (N-2-ClZ-(R)-beta2-HPhe) was imprinted with methacrylic acid (MAA) and/or 4-vinylpyridine (4-VPy) as the functional monomers, with ethylene glycol dimethacrylate (EDMA) as the cross-linker. The MIPs made with different ratios of MAA:4-VPy were studied in HPLC mode. The results show that MIPs made with 4-VPy yielded the best chiral separation factor (alpha= 1.86) for the template molecule. The importance for an efficient separation of pi-stacking interactions between the MIPs and the template molecule is demonstrated. Racemates of Z-alpha-amino acids and beta-amino acid analogues of the template were either not or poorly resolved by the MIPs, thus demonstrating the close three-dimensional complementarity of the MIPs' recognition sites with the template.     

Self‐assembled magnetic nanoparticle supported zeolitic imidazolate framework‐8: An efficient adsorbent for the enrichment of triazine herbicides from fruit,vegetables, and water

Zeolitic imidazolate frameworks have positive surface charges and high adsorption capabilities. In this work, zeolitic imidazolate frameworks‐8 and negatively charged magnetic nanoparticles were self‐assembled by electrostatic attraction under sonication. The extraction performance of the synthesized hybrid material was evaluated by using it as a magnetic adsorbent for the enrichment of triazine herbicides in various sample matrices prior to analysis using ultrafast liquid chromatography. The main parameters, that is, extraction time, adsorbent dosage, salt concentration, and desorption conditions, were evaluated. Under the optimum conditions, good linear responses from 2.5 to 200 ng/mL for atrazine (simazine) and 1 to 200 ng/mL for prometryn (ametryn), with correlation coefficients (R ²) higher than 0.9992 were obtained. The detection limits of the method (S/N = 3) were 0.18–0.72 ng/mL. The proposed method was successfully used to determine triazine herbicides in six samples, namely, apple, pear, strawberry, pakchoi, lettuce, and water. The amounts of simazine in all the fruit and vegetable samples were 10.8–25.2 ng/mL. The recoveries of all the analytes were 88.0–101.9%, with relative standard deviations of less than 8.8%.