Rotational viscosity γ1 of nematic liquid crystals as a function of temperature,pressure and density

Abstract

Measurements of the rotational viscosity γ₁ and the density are presented for a mixture of 4′-methoxybenzylidenebutylaniline (MBBA) and its ethoxy homologue EBBA and a mixture of cyclohexylphenylnitriles (ZLI 2413 from Merck AG) as a function of temperature and pressure. A new set-up for the measurement of densities under pressures of up to 3kbar is described. It is shown that the pressure dependence of the kinematic rotational viscosity γ₁/ρ and the temperature dependence of γ₁ under isobaric and isochoric conditions have common features with that of the shear viscosity of isotropic liquids. Furthermore, it is found that the curves γ₁ = f(1/T) for constant p and γ₁ = g(ρ) for constant T can be shifted one onto another by an appropriate shift of the scale of the independent variable.     

Volumetric and viscosimetric properties of N-methyl-2-pyrrolidone with γ-butyrolactone and propylene carbonate

Volumetric properties of N-methyl-2-pyrrolidone (NMP) binary mixtures with γ-butyrolactone (GBL) and propylene carbonate (PC) are calculated from the experimental densities and reported in the temperature range from (293.15 to 323.15) K and at atmospheric pressure (0.1 MPa) over the whole composition range. The excess molar volumes have positive values in the whole concentration range in the case of (NMP + PC) binary mixture, with maximum value at equimolar composition, indicating weaker interactions between the components after the mixing. Two extreme V^E values are observed in (NMP + GBL) system: maximum at x(NMP) = 0.4 and minimum at x(NMP) = 0.9. Negative V^E values in NMP-rich region are the consequence of the better geometrical fit of the molecules. The excess properties of (NMP + GBL) and (NMP + PC) binaries are analyzed using Prigogine–Flory–Paterson theoretical model. An excellent agreement between experimental and theoretical values at equimolar composition is observed. Apparent molar volumes and thermal expansion coefficients are also calculated. Viscosity measurements of the pure components and NMP binary mixtures with GBL and PC were performed in the temperature range from (298.15 to 323.15) K. Using obtained experimental viscosities several semi-empirical equations and models were tested.     

Natural monocrystalline chalcopyrite and galena as electrochemical sensors in non-aqueous solvents. Part I: potentiometric titrations of weak acids in γ-butyrolactone and propylene carbonate

Natural monocrystalline chalcopyrite and galena as new indicator electrodes for the potentiometric titrations of benzoic, anthranilic, -nitroso--naphthol and salicylic acids in -butyrolactone (GBL) and propylene carbonate have been used. Potassium hydroxide in methanol was employed as the titrating agent. The results are compared with those obtained using a glass electrode. The investigated electrodes showed a linear dynamic response for p-toluensulfonic acid concentrations in the range from 0.1 to 0.001 M, with a Nernstian slope of 63 mV for chalcopyrite, 66 mV per decade for galena in GBL, 77 mV for chalcopyrite and 98 mV per decade for galena in propylene carbonate. Both electrodes showed a relatively fast response time and can be used without any time limit or without considerable divergence in potentials. The standard deviation of the determination of the investigated acids was less than 0.5%.     

Rate constants for the gas-phase reactions of OH and O3 with β-ocimene, β-myrcene, and α- and β-farnesene as a function of temperature

The rate constants for the gas-phase reactions of hydroxyl radicals and ozone with the biogenic hydrocarbons β-ocimene, β-myrcene, and α- and β-farnesene were measured using the relative rate technique over the temperature ranges 313-423 (for OH) and 298-318 K (for O?) at about 1 atm total pressure. The OH radicals were generated by photolysis of H?O?, and O? was produced from the electrolysis of O?. Helium was used as the diluent gas. The reactants were detected by online mass spectrometry, which resulted in high time resolution, allowing large amounts of data to be collected and used in the determination of the Arrhenius parameters. The following Arrhenius expressions have been determined for these reactions (in units of cm3 molecules?1 s?1): for β-ocimene + OH, k = (4.35(-0.66)(+0.78)) × 10?11 exp[(579 ± 59)/T]; for β-ocimene + O?, k = (3.15(-0.95)(+1.36)) × 10?1? exp[-(626 ± 110)/T]; for β-myrcene + O?, k = (2.21(-0.66)(+0.94)) × 10?1? exp[-(520 ± 109)/T]; for α-farnesene + OH, k(OH) = (2.19 ± 0.11) × 10?1? for 23-413 K; for α-farnesene + O?, k = (3.52(-2.54)(+9.09)) × 10?12 exp[-(2589 ± 393)/T]; for β-farnesene + OH, k(OH) = (2.88 ± 0.15) × 10?1? for 323-423 K; for β-farnesene + O?, k = (1.81(-1.19)(+3.46)) × 10?12 exp[-(2347 ± 329)/T]. The Arrhenius parameters here are the first to be reported. The reactions of α- and β-farnesene with OH showed no significant temperature dependence. Atmospheric residence times due to reactions with OH and O? were also presented.     

Liquid–liquid miscibility and volumetric properties of aqueous solutions of ionic liquids as a function of temperature

The volumetric properties of seven {water + ionic liquid} binary mixtures have been studied as a function of temperature from (293 to 343) K. The phase behaviour of the systems was first investigated using a nephelometric method and excess molar volumes were calculated from densities measured using an Anton Paar densimeter and fitted using a Redlich–Kister type equation. Two ionic liquids fully miscible with water (1-butyl-3-methylimidazolium tetrafluoroborate ([C₁C₄Im][BF₄]) and 1-ethyl-3-methylimidazolium ethylsulfate ([C₁C₂Im][EtSO₄])) and five ionic liquids only partially miscible with water (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₂Im][NTf₂]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₄Im][NTf₂]), 1-butyl-3-methylimidazolium hexafluorophosphate ([C₁C₄Im][PF₆]), 1-butyl-3-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C₁C₄Pyrro][NTf₂]), and butyltrimethylammonium bis(trifluoromethylsulfonyl)imide ([N₄₁₁₁][NTf₂])) were chosen. Small excess volumes (less than 0.5 cm³ · mol^?1 at 298 K) are obtained compared with the molar volumes of the pure components (less than 0.3% of the molar volume of the pure ionic liquid). For all the considered systems, except for {[C₁C₂Im][EtSO₄] + water}, positive excess molar volumes were calculated. Finally, an increase of the non-ideality character is observed for all the systems as temperature increases.     

Thermal,Mechanical and Rheological Properties of Eco-friendly Poly（propylene carbonate）/Poly（1,2-propylene succinate） Blends

In order to improve the flexibility of poly（propylene carbonate） （PPC）, poly（1,2-propylene succinate） （PPSu） was used to plasticize PPC in a batch mixer. The effects of PPSu on the miscibility, thermal stability, mechanical and theological properties of the blends were investigated. PPC was partially miscible with PPSu. It was demonstrated that PPSu decreased the glass transition temperature and melt viscosity of PPC, as shown in the DSC and rheological curves. With the increase in PPSu content, the PPC/PPSu blends showed decreased tensile strength, however, the elongation at break was increased to 1100% for the 70/30 PPC/PPSu blend. The introduction of PPSu provided an efficient and novel plasticization method to extend the application area of PPC.     

Reactions of cyclopentanone, γ-butyrolactone,and their derivatives with α-hydroxyethyl radicals

The interaction of cyclopentanone, 2-cyclopentenone, 1,3-cyclopentanedione, 3-methyl-1,2-cyclopentanedione, γ-butyrolactone, 2(5H)-furanone, ascorbic acid, and 5,6-O-isopropylidenyl-2,3-O-dimethylascorbic acid with α-hydroxyethyl radicals (α-HER) generated during the radiolysis of deaerated ethanol has been studied in the continuous irradiation mode. The test compounds, except γ-butyrolactone, oxidize α-HER. 2(5H)-Furanone and 2-cyclopentenone give hydroxyethylation products via the free-radical chain mechanism. In contrast to 2(5H)-furanone and 2-cyclopentenone, ascorbic and 5,6-O-isopropylidenyl-2,3-O-dimethyl-L-ascorbic acids are weaker oxidants for α-HER and attach these radicals at the multiple carbon-carbon bonds.     

BH−4 isolated in RbI: Internal and external modes of vibration as function of temperature and pressure as studied by Raman and i.r. spectroscopy

Previously unreported bands in the i.r. spectra of BH⁻₄ isolated in Rbl are interpreted in terms of summation bands of internal and external modes of vibration. Raman and far i.r. spectra of this system are reported for the first time. Reliable values for i.r. inactive internal modes ν₁ and ν₂ have been obtained and external modes due to torsional and translational motion have been identified. A gap-mode has also been found. The temperature and pressure dependence of these features have been measured spectroscopically.     

Liquid–vapour equilibria of the methyl esters of alkanoic acids: vapour pressures as a function of temperature and standard thermodynamic function changes

The vapour pressures as a function of temperature of the methyl esters of alkanoic acids from butanoic to eicosanoic acid, have been measured using two different techniques: the static diaphragm and spinning rotor manometry and the combined torsion mass-loss effusion. Combined with data available from literature, the new data have been processed using the thermodynamic regression equation proposed by Clarke and Glew. The results of this research are reliable vapour pressures and the thermodynamic properties of vaporisation.     

Estimation of the normal boiling points of water and 1,2-dimethoxyethane through the viscosity–temperature dependence in the corresponding binary mixtures

Excess quantities calculated from literature values of experimental density and viscosity in 1,2-dimethoxyethane + water binary systems (from 303.15 to 323.15 K) can lead us to test different correlation equations as well as their corresponding derivative properties. Inspection of the Arrhenius activation energy (Ea) and the enthalpy of activation of viscous flow (ΔH*) shows very close values; here, we can define partial molar activation energies Ea₁ and Ea₂ for 1,2-dimethoxyethane and water, respectively, along with their individual contribution separately. Correlation between the two Arrhenius parameters of viscosity in all compositions shows existence of main distinct interaction behaviours delimited by particular mole fractions in 1,2-dimethoxyethane. Moreover, we add that correlation between Arrhenius parameters reveals interesting Arrhenius temperature which is closely related to the vapourisation temperature in the liquid vapour equilibrium, and the limiting corresponding partial molar properties can permit us to estimate the boiling points of the pure components.     

Reaction of imidazole and its 2-alkyl derivatives with γ-butyrolactone

Reaction of imidazole with -butyrolactone gives N-alkylation and N-acylation products depending upon the reaction conditions.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1491–1493, November, 1992.     

Vapour pressure data of ε-caprolactone, δ-hexalactone,and γ-caprolactone

This work reports new vapour pressure data of ε-caprolactone, δ-hexalactone, and γ-caprolactone. Vapour pressure measurements were carried out over the temperature range of (283 to 343) K using the static method with a differential pressure transducer. Degassing was performed inside the equilibrium cell by freezing and thawing the samples under moderate vacuum (about 50 kPa). For ε-caprolactone and δ-hexalactone vapour pressure values varied in the range of (0.045 to 0.769) kPa and (0.005 to 0.354) kPa, respectively, while for γ-caprolactone a maximum value of 1.367 kPa was found. Experimental vapour pressure data were correlated by the Antoine equation with a good agreement between experiment and model.     

Influence of the proportion of ytterbium triflate as initiator on the mechanism of copolymerization of DGEBA epoxy resin and γ-butyrolactone

Non-isothermal differential scanning calorimetry (DSC) experiments were performed to study the kinetics of the curing process of mixtures of diglycidylether of bisphenol A (DGEBA) and γ-butyrolactone (γ-BL) with ytterbium triflate as an initiator. It can be deduced that the cured material consists of epoxide homopolymers with incorporated poly(ether-ester) unities, which come from the lactone incorporated into the network. The kinetic parameters, obtained using the non-isothermal isoconversional procedure, show not only the importance of the proportion of initiator but also the influence of γ-butyrolactone on the polymerization of DGEBA. The homopolymerization of DGEBA catalyzed by ytterbium triflate has an activation energy of 85.3 kJ mol⁻¹, which decreases to 68.2 kJ mol⁻¹ in the presence of γ-butyrolactone forming copolymers. Analysis from DSC and FTIR data showed that, when the proportion of ytterbium triflate was increased, the reaction process accelerated and the mechanism of the cationic non-linear polymerization named activated monomer (AM) became more evident than the activated chain-end mechanism (ACE). Finally, the activation energies and the pre-exponential factors were determined for both mechanisms.     

Diaza-crown ethers—II: Stability constants of a cyclic and a bicyclic diaza-polyether with some alkali cations in acetonitrile

The stability constants for the 1:1 complexes of 1,7,10,16-tetraoxa-4, 13-diazacyclooctadecane and 4,7,13,16,21,24-hexaoxa-1, 10-diazabicyclo[8,8,8]hexacosane with Na⁺, K⁺, Rb⁺ and Cs⁺ have been determined in acetonitrile at 25.0°C by conductivity measurements. The stability constants are considerably higher, and the selectivity is different, for the monocyclic ligand in acetonitrile than in methanol. The bicyclic ligand forms much stronger complexes than the monocyclic one. These results are discussed in terms of the size of the central ion and the ligand cavity and of metal/ligand solvation.     

Replication of biosynthetic reactions enables efficient synthesis of A-factor, a γ-butyrolactone autoinducer from Streptomyces griseus

We report a concise synthesis of A-factor, the prototypical γ-butyrolactone signalling compound of Streptomyces bacteria. In analogy to enzymatic reactions in A-factor biosynthesis, our synthesis features a tandem esterification-Knoevenagel condensation yielding a 2-acyl butenolide and a surprising, chemoselective conjugate reduction of this α,β-unsaturated carbonyl compound using sodium cyanoborohydride.     

High hydrostatic pressure increases the biosynthesis of γ-aminobutyric acid using bee pollen as a novel and eco-friendly catalyst

Gamma-amino butyric acid (GABA) has antihypertensive and anti-stress effects on human health. High hydrostatic pressure (HHP), a nonthermal treatment, has been documented as a novel approach to enhance the nutritional quality and functional components of plant-based food. In this study, a novel method to convert monosodium glutamate (MSG) to GABA using bee pollen as a natural catalyst was observed, and the GABA yield was improved by HHP treatment. Firstly, GABA production was confirmed by high performance liquid chromatography (HPLC) and tandem mass spectrometry (MS-MS), the highest GABA production was found in lotus bee pollen (LBP) when different varieties of bee pollen were used for the reaction. Secondly, the reaction conditions were utilized, and the optimal reaction condition of the GABA production was determined as described below: 250 mg/mL of bee pollen mixed with 590 mmol/L of MSG that prepared by 80 mmol/L of phosphate buffer (pH 5.8), and incubated at 40 °C for 6 h. For HHP treatment conditions, a treatment of 200 MPa for 10 min at 40 °C was found as the optimal. Under optimal conditions, GABA production reached 508.79 mmol/L (containing GABA from LBP) from 590 mmol/L of MSG. In conclusion, we found and optimized a novel method to convert monosodium glutamate (MSG) to GABA, and proposed the promotion of HHP on GABA bio-conversion.     

The relative permittivity of 1,2-dimethoxyethane and N,N-dimethylformamide mixtures from −10 to 40°C

Binary solutions of N,N-dimethylformamide and 1,2-dimethoxyethane have been investigated by means of dielectric measurements at temperatures ranging from –10 to +40°C, and for nine mixtures covering the whole miscibility field expressed by the mole fraction of one component (0X₁1). The experimental data were used to study the dependence of on T and X₁, of the type = (T), = (X₁), and = (T,X₁). Further, the excess mixing function _E has been evaluated in order to identify particular patterns of interaction between unlike molecules and any other factor that could modify such patterns. The minimum in the _E vs. composition plots suggests the formation of an adduct of stoichiometric ratio DMFDME=11 at all the investigated temperatures.     

Densities and viscosities of propylene carbonate with aromatic hydrocarbons (benzene, 1,4-dimethylbenzene and ethylbenzene) at 288.15, 298.15 and 308.15 K

Densities and viscosities of the binary mixtures of propylene carbonate with benzene, 1,4-dimethylbenzene and ethylbenzene were measured over the entire mole fraction range at 288.15, 298.15 and 308.15?K. Using the experimental values of densities and viscosities the excess molar volumes and viscosity deviations were calculated. The results were fitted by Redlich–Kister equation. The results were discussed in terms of intermolecular interactions.