Reassessment of commercially available molecular weight standards for peptide sodium dodecyl sulfate-polyacrylamide gel electrophoresis using electroblotting and microsequencing

Myoglobin CNBr peptides, constituting the commercially available molecular weight calibration kits for sodium dodecyl sulfate-polyacrylamide gel electrophoresis, were analyzed by microsequencing after electroblotting on polyvinylidene difluoride (Immobilon) membranes. An obvious disagreement was found between peptide identification and the data provided by the manufacturers. We observed 6 peptides from Mr 2500 to 17,000 corresponding, in increasing size order, to the 3 peptides resulting from the total CNBr digestion, to 2 incompletely cleaved peptides and to the intact myoglobin. Using a corrected calibration curve, a linear relationship was established from Mr 6000 to 43,000 and a second one for shorter peptides. This method of electrophoresis and electroblotting, easily adapted for peptides, is a powerful tool for peptide identification correlated with size determination. It is especially useful for CNBr-cleaved peptides.     

A new multiphasic buffer system for sodium dodecyl sulfate-polyacrylamide gel electrophoresis of proteins and peptides with molecular masses 100,000-1000, and their detection with picomolar sensitivity.

A novel multiphasic buffer system for high resolution sodium dodecyl sulfate-polyacrylamide gel electrophoresis of dansylated and nondansylated proteins/peptides in the relative molecular mass (Mr) range of 100,000-1000 is described. The system, based on Jovin's theory of multiphasic zone electrophoresis, allows complete stacking and destacking of proteins/peptides within the above Mr range. The buffer system uses Bicine and sulfate as trailing and leading ion, respectively, and Bistris and Tris as counter ions in the stacking and separating phase, respectively. Through selection of two different counter ions--the characteristic feature of the present ionic system--the stacking limits of a multiphasic buffer system can be further widened, thus making it applicable to gel electrophoresis of a larger spectrum of rapidly migrating species, such as sodium dodecyl sulfate-proteins/peptides and nucleic acids, than has been possible previously. Highly sensitive detection methods for proteins as well as for polypeptides down to approximately Mr 1000 are described. Dansylated proteins/peptides were detected by their fluorescence either directly within the gel or following electroblotting into anion-exchange or polyvinylidene difluoride membranes. The latter procedure resulted in detection sensitivities of approximately 1 ng. Nondansylated proteins/peptides were either detected within the gel by colloidal Coomassie staining or by electroblotting into polyvinylidene difluoride membranes, followed by colloidal gold staining. Prior to both staining procedures the proteins/peptides were pretreated with glutardialdehyde in the presence of borate at near neutral pH values to generate protein/peptide polymers of poor solubility. For a given pH the efficiency of the latter procedure was significantly influenced by the nature of the buffer ion used in the fixation buffer. In contrast to conventional fixation procedures even small polypeptides (Mr 1000) were immobilized and approximately 15 ng and 0.75 ng could be detected after colloidal Coomassie and colloidal gold staining, respectively.     

Application of high-performance liquid chromatography to the purification of the putative intestinal peptide transporter

A membrane protein of relative molecular mass (Mr) 127,000 was identified by photoaffinity labelling as (a component of) the uptake system for small peptides and beta-lactam antibiotics in rabbit small intestine. This binding protein is a microheterogeneous glycosylated integral membrane protein which could be solubilized with non-ionic detergents and enriched by lectin affinity chromatography on wheat germ lectin agarose. For the final purification of this protein and separation from aminopeptidase N of Mr 127,000, fast protein liquid chromatography (FPLC) was used. Gel permeation, hydroxyapatite and hydrophobic interaction chromatography were not successful for the purification of the 127,000-dalton binding protein. By anion-exchange chromatography on a Mono Q column with either Triton X-100 or n-octylglucoside as detergent, a partial separation of the 127,000-dalton binding protein from aminopeptidase N was achieved. By cation-exchange chromatography on a Mono S HR 5/5 column at pH 4.5 using Triton X-100 as detergent also only a partial separation from aminopeptidase N could be achieved. If, however, Triton X-100 was replaced with n-octylglucoside, the binding protein for beta-lactam antibiotics and small peptides of Mr 127,000 could be completely separated from aminopeptidase N. These results indicate that Triton X-100 should be avoided for the purification of integral membrane proteins because mixed protein-detergent micelles of high molecular weight prevent a separation into the individual membrane proteins. The putative peptide transport protein was finally purified by rechromatography on Mono S and was obtained more than 95% pure as determined densitometrically after sodium dodecyl sulphate gel electrophoresis. By application of FPLC even microheterogeneous membrane glycoproteins from the intestinal mucosa can be purified to such an extent that a sequence analysis and immunohistochemical localization with antibodies prepared from the purified protein is possible.     

An exponential dilution gradient system for nanoscale liquid chromatography in combination with MALDI or Nano-ESI mass spectrometry for proteolytic digests

A simple and inexpensive nano high performance liquid chromatography system (nano-LC) employing the exponential dilution method for gradient separations was built. The system was used to analyze a tryptic digest of Escherichia coli uracil DNA glycosylase (Ung; Mr = 25,563), a DNA-binding protein that initiates the uracil-excision DNA repair process by catalyzing the release of uracil from the deoxyribose phosphate backbone of DNA. Both on-line and off-line approaches to analyzing peptides produced by in-gel digestion of Ung are demonstrated. The on-line approach uses nano-high performance liquid chromatography (HPLC)/micro-electrospray MS to assign peptide masses. The off-line approach uses matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and nano-electrospray/collision-induced dissociation (CID) tandem mass spectrometry, to analyze fractions (2-3 microL) collected manually from the nano-LC system. The nano-electrospray technique allows detailed fragmentation information to be obtained at different collision energies with only a marginal increase in sample handling due to the nano-LC step.     

酶法获得的多肽库用于新型手性固定相的制备

采用胰蛋白酶酶解牛血清白蛋白,将制备的酶解液超滤,得到相对分子质量小于6000的小分子多肽库。应用羰基咪唑法将该多肽库键合至多孔硅胶,得到一种新型手性固定相。应用该新型手性固定相成功地拆分了两种氨基酸对映体。     

反相高效液相色谱/电喷雾质谱法分析化学合成七肽粗产物

利用RP—HPLC／ESI—MS直接分析用芴甲氧羰基(Fmoc)固相多肽合成方法在PHB树脂上偶联合成的一个七肽(H2N—Tyr—Val—Asn-Thr-Asn—Met—Gly—COOH,Mr797．3)粗产物。RP—HPLC显示合成粗产物含有1个主成分,4个次要成分和多个微量成分;与之联用的电喷雾质谱则同步准确地测定出各成分的分子量(m／z)并自动对各主要成分的化学结构进行了串联质谱分析。结果证明,粗产物中的主成分即为目标七肽,另外几个主要副产物为七肽的氧化产物或残缺肽。     

Mobility surfaces for field-inversion gel electrophoresis of linear DNA

The mobility of linear DNA during field-inversion gel electrophoresis was measured as a function of molecular weight Mr, pulse time t, and field strength E. Values of Mr between 48.5 and 194 kilobase pairs (kb), E from 5 to 14 V/cm and pulse times of 0.3 to 12 s were used. The data are presented as three-dimensional surfaces of mobility: E:t for fixed Mr or graphs of mobility: Mr:t for fixed E. The surfaces are not smoothly increasing functions of E, Mr, or t but instead show a valley with minimum mobility and a steep rise in mobility as t increases. For a field of 10 V/cm, 1% agarose gels, and 3:1 ratio of forward:back pulse time, the forward switching time t* at which the mobility changes most rapidly is given by t* = (0.034 +/- 0.003) Mr for Mr in kb and t* in seconds. The data and equations delineate the best conditions to achieve a particular separation.     

Use of Edman degradation sequence analysis and matrix-assisted laser desorption/ionization mass spectrometry in designing substrates for matrix metalloproteinases

The matrix metalloproteinase (MMP) family has been implicated in the process of a variety of diseases such as arthritis, atherosclerosis, and tumor cell metastasis. We have been designing single-stranded peptides (SSPs) and triple-helical peptides (THPs) as potential discriminatory MMP substrates. Edman degradation sequence and matrix-assisted laser desorption/ionization mass spectrometric (MALDI-MS) analyses of proteolytic activity have been utilized to aid in further substrate design. THP models of the alpha1(I)772-786 sequence from type I collagen were synthesized to examine the triple-helical substrate specificity of MMP family members. Sequence and MALDI-MS analyses were used in conjunction with a fluorometric assay to determine the exact point of cleavage by each MMP. MMP-1 (interstitial collagenase) cleaved the substrates at a single Gly-Ile bond, analogous to the cleavage site in type I collagen. MMP-2 (Mr 72 000 type IV collagenase; gelatinase A) was found to cleave the substrates at two sites, a Gly-Ile bond and a Gly-Gln bond. MMP-3 (stromelysin 1) was found to cleave only one of the substrates after reaction for 48 h. Ultimately, sequence and MALDI-MS analyses allowed us to detect an additional cleavage site for MMP-2 in comparison to MMP-1, while MMP-3 was found to cleave a substrate after an extended time period. The second cleavage site would cause the kinetic parameters for MMP-2 to be overestimated by the fluorometric assay. Further design variations for these substrates need to consider the presence of more stable triple-helical conformation (to eliminate MMP-3 binding) and the removal of Gly-Gln bonds that may be susceptible to MMP-2.     

Automated signature peptide approach for proteomics

This paper addresses the issue of automating the multidimensional chromatographic, signature peptide approach to proteomics. Peptides were automatically reduced and alkylated in the autosampler of the instrument. Trypsin digestion of all proteins in the sample was then executed on an immobilized enzyme column and the digest directly transferred to an affinity chromatography column. Although a wide variety of affinity columns may be used, the specific column used in this case was a Ga(III) loaded immobilized metal affinity chromatography (IMAC) column. Ga(III)-IMAC is known to select phosphorylated peptides. Phosphorylated peptides selected by the affinity column from tryptic digests of milk were automatically transferred to a reversed-phase liquid chromatography (RPLC) column. Further fractionation of tryptic peptides on the RPLC column was achieved with linear solvent gradient elution. Effluent from the RPLC column was electrosprayed into a time-of-flight mass spectrometer. The entire process was controlled by software in the liquid chromatograph. With slight modification, it is possible to add multiple columns in parallel at any of the single column positions to further increase throughput. Total analysis time in the tandem column mode of operation was under 2 h.     

Development of a titanium dioxide nanoparticle pipette-tip for the selective enrichment of phosphorylated peptides

The selective enrichment of specific proteins or peptides on micropipette tips prior to mass spectrometry analysis, which can minimize non-specific interferences as well as sample loss, has been an important issue in current proteomics field. In this paper, we have developed an easy-to-use phosphopeptide-selective pipette tip in which titanium dioxide nanoparticles were embedded in monolithic structure photopolymerized from ethylene glycol dimethacrylate. The simple and convenient fabrication was feasible in a commercial polypropylene pipette tip. Phosphorylated peptides were isolated from non-phosphopeptides by TiO(2) nanoparticle and eluted by 100 mM ammonium phosphate (pH 8.5), which was compatible with 2,5-dihydroxybenzoic acid (DHB)/1% phosphoric acid matrix and allowed for direct analysis of the elution fraction by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) without the necessity of desalting pretreatment. Tryptic digested alpha-casein and beta-casein spiked into bovine serum albumin (BSA) nonphosphorylated peptides (molar ratio 1:1:10) were used to assess the selectivity of TiO(2) tips. The effect of 50 mM ammonium hydrogencarbonate, pH 8 in 50% acetonitrile used as a wash buffer in reduction of nonspecific bound peptide to TiO(2) tip was dramatic. Almost all non-phosphopeptides were not detected by MALDI-MS analysis. The lowest detectable amount of phosphopeptide was estimated at low femtomole level. The easy-to-use TiO(2)-embeded tips operated in combination with the modified wash and elution conditions enable an efficient phosphopeptide enrichment for mass spectrometric analysis.     

Microwave-assisted acid hydrolysis of proteins combined with liquid chromatography MALDI MS/MS for protein identification

Simple and efficient digestion of proteins, particularly hydrophobic membrane proteins, is of significance for comprehensive proteome analysis using the bottom-up approach. We report a microwave-assisted acid hydrolysis (MAAH) method for rapid protein degradation for peptide mass mapping and tandem mass spectrometric analysis of peptides for protein identification. It uses 25% trifluoroacetic acid (TFA) aqueous solution to dissolve or suspend proteins, followed by microwave irradiation for 10 min. This detergent-free method generates peptide mixtures that can be directly analyzed by liquid chromatography (LC) matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) without the need of extensive sample cleanup. LC-MALDI MS/MS analysis of the hydrolysate from 5 microg of a model transmembrane protein, bacteriorhodopsin, resulted in almost complete sequence coverage by the peptides detected, including the identification of two posttranslational modification sites. Cleavage of peptide bonds inside all seven transmembrane domains took place, generating peptides of sizes amenable to MS/MS to determine possible sequence errors or modifications within these domains. Cleavage specificity, such as glycine residue cleavage, was observed. Terminal peptides were found to be present in relatively high abundance in the hydrolysate, particularly when low concentrations of proteins were used for MAAH. It was shown that these peptides could still be detected from MAAH of bacteriorhodopsin at a protein concentration of 1 ng/microl or 37 fmol/microl. To evaluate the general applicability of this method, it was applied to identify proteins from a membrane protein enriched fraction of cell lysates of human breast cancer cell line MCF7. With one-dimensional LC-MALDI MS/MS, a total of 119 proteins, including 41 membrane-associated or membrane proteins containing one to 12 transmembrane domains, were identified by MS/MS database searching based on matches of at least two peptides to a protein.     

On-line coupling of SPE and CE-MS for peptide analysis

An on-line SPE-CE-MS system has been developed for the analysis of peptides. Analytes are preconcentrated using a C(18) microcolumn (5 x 0.5 mm id), and then introduced into the CE system via a valve interface. The CE system with a Polybrene-poly(vinylsulfonate) bilayer coated capillary is combined with an ion-trap mass spectrometer via ESI using a coaxial sheath-liquid sprayer. The on-line coupling of the SPE and CE step by the valve interface is advantageous because it allows an independent functioning of the system parts. Optimization of the SPE-CE system was performed using UV detection. Subsequently, the SPE-CE system has been coupled to the ion-trap mass spectrometer. Test solutions with enkephalin peptides (50 ng/mL) were used for evaluation of system performance. Repeatability of effective mobility and peak area ratio of the two enkephalins were within 1.2% and 9% RSD, respectively. The analysis of 1:1 v/v diluted cerebrospinal fluid samples spiked with enkephalin peptides showed detection limits (S/N = 3) in the range of 1.5-3 ng/mL (around 5 nM), which were similar to those obtained for enkephalin test solutions. Moreover, the potential of the on-line SPE-CE-MS system was demonstrated by the analysis of a cytochrome C digest. Some hydrophilic peptides did not show sufficient retention on the SPE column, and were lost during preconcentration. Nonetheless, positive identification of the protein was achieved, indicating the feasibility of the system for proteomics.     

Fast purification of Clostridium sordellii cytotoxin.

We have developed a rapid method for the purification of proteins, combining titration curve analysis with a two-step column chromatographic procedure. We have used this approach to purify the cytotoxin (L toxin) from Clostridium sordellii. We have also determined the amino acid composition of this cytotoxin. This toxin has a pI value of 4.20 and an Mr of 260,000, reduction of which results in a band of Mr 43,000 on sodium dodecyl sulphate polyacrylamide gel electrophoresis. Since both the proteins of Mr 260,000 and 43,000 are recognized by the polyclonal anti-C. sordellii L toxin, which neutralizes the L toxin cytotoxicity, we propose a hexameric structure for the protein of Mr 260,000, each subunit being Mr 43,000.     

Strategies for internal amino acid sequence analysis of proteins separated by polyacrylamide gel electrophoresis

An evaluation has been made of various strategies for obtaining internal amino acid sequence data from electrophoretically separated proteins. Electroblotting, in situ proteolysis and extraction, and direct electroelution are compared. Electroblotting of protein or peptides from gels resulted in poor yields (typically, 1-7%). However, higher yields (3-67%) were achieved by in situ enzymatic cleavage followed by acid extraction of the peptides from the gel. Peptides extracted from the gel were separated by reversed-phase high-performance liquid chromatography (RP-HPLC), on short, small-bore columns (100 x 2.1 mm I.D.), to enable recovery of peptides in small volumes (ca. 50 microliters) suitable for microsequence analysis. Capillary zone electrophoresis under acidic conditions (pH 2.5) was used to assess peptide purity before sequence analysis. Cysteine residues were identified in unmodified proteins or peptides by a characteristic phenylthiohydantoin (PTH)-amino acid derivative during sequence analysis. This derivative does not co-chromatograph with any known PTH-amino acid. Direct electrophoretic elution of protein from gels yielded between 45-50% of applied protein. Proteins recovered from gels by electrophoretic elution required further purification by inverse-gradient RP-HPLC [R. J. Simpson, R. L. Moritz, E. C. Nice and B. Grego, Eur. J. Biochem., 165 (1987) 21] to remove sodium dodecylsulphate and acrylamide-related contaminants for sequence analysis.     

Sensitivity enhancement of CE and CE-MS for the analysis of peptides by a dynamic pH junction

An analytical method of CE-MS and CE with an online preconcentration technique induced by a dynamic pH junction, addition of organic solvent and large volume injection was developed for sensitive determination of peptides in biological samples. Leucine enkephalin, methionine enkephalin, dynorphin A, β-endorphin and angiotensin II were used as model peptides. The optimal online preconcentration conditions were obtained at a sample matrix consisting of 100?mM borate buffer (pH 10.0) with 50% v/v acetonitrile and a BGE containing 1?M formic acid at pH 2.0, along with a 25-cm injection length. Under the optimized conditions, a 4.0×10(3)-1.1×10(4)-fold increase in peak intensity was achieved without degrading the peak shape. This online preconcentration method was applied to analyze the intracellular angiotensin II within the peptides extracted from HL1 cells and approximately increase of 1×10(4)-fold sensitivity was achieved compared to normal condition. Thus, the developed method could be applied to the analysis of various peptides for peptidomics study in biological samples.     

Comparative evaluation of size-exclusion chromatography and viscometry for the characterisation of cellulose

The analysis using size-exclusion chromatography (SEC) with multi-angle light scattering (MALS) and differential refractive index (DRI) detection of cellulose dissolved in lithium chloride/N,N-dimethylacetamide (LiCI/DMAc) is evaluated and compared to two other methods currently used for cellulose analysis. These are SEC with low-angle light scattering (LALS) and ultra-violet detection of cellulose derivatised to tricarbanilates (CTC), and viscometry in cadmium triethylene diamine dihydroxide (cadoxen). The cellulose source is Whatman No. 1 paper, unaged or artificially aged with a combination of heat and humidity. The values of the molar mass (Mr) averages of cellulose obtained with the different methods resulted quite different for both aged and unaged paper. SEC of cellulose in LiCl/DMAc provided the highest Mr averages values, followed by SEC of CTC, while viscometry yielded the lowest values. These differences were more or less pronounced depending on the initial degradation state of the paper. Several hypotheses are presented in order to explain these discrepancies and each method is discussed on the basis of its suitability to characterise the aging-induced degradation.     

Improvements to the compressed-sample (CS) technique for MALDI-TOF mass spectrometry

A recently developed solvent-free compressed-sample technique for matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) analysis allows the reproducible analysis of synthetic polymers and peptides up to 3,500 Da. In this work, we present an improvement in resolution, an increase in intensity and a decrease of the variation coefficient, as illustrated by the analysis of PEG 2000 and MALDI imaging experiments. These advantages were achieved by homogenization of the electrical field, which was disturbed by the drills in the original MALDI target. In order to homogenize the electrical field, a new target with smaller drills was developed, metal powder was added to the matrix/analyte mixture and a round laser raster was used. Furthermore, a ball mill was implemented for the sample preparation to replace the extremely user-dependent grinding in a mortar. The new conditions were successfully applied to the quantification of several peptides of higher molecular weight and gave higher precision than had previously been achieved with the compressed-sample technique.     

Separation and investigation of structure-mobility relationships of insect oostatic peptides by capillary zone electrophoresis

Capillary zone electrophoresis (CZE) has been applied to qualitative analysis, separation, and physicochemical characterization of synthetic insect oostatic peptides (IOPs) and their derivatives and fragments. Series of homologous IOPs were separated in three acidic background electrolytes (BGEs; pH 2.25, 2.30, 2.40) and an alkaline BGE (pH 8.1). Best separation was achieved in acid BGE composed of 100 mM H3PO4, 50 mM Tris, pH 2.25. The effective electrophoretic mobilities, mu(ep), of all IOPs in four BGEs were determined and several semiempirical models correlating effective mobility with charge-to-size ratio (mu(ep) versus q/Mr k) were tested to describe the migration behavior of IOP in CZE. None of models was found to be unambiguously applicable for the whole set of 20 IOPs differing in size (dipeptide - decapeptide) and charge (-2 to +0.77 elementary charges). However, a high coefficient of correlation, 0.9993, was found for the subset of homologous series of IOPs with decreasing number of proline residues at C-terminus, H-Tyr-Asp-Pro-Ala-Prox-OH, x = 6 - 0, for the dependence of mu(ep) on q/Mr k with k = 0.5 for IOPs as anions in alkaline BGE and with k = 2/3 for IOPs as cations in optimized acidic Tris-phosphate BGE. From these dependences the probable structure of IOPs in solution could be predicted.     

An integrated procedure of selective injection, sample stacking and fractionation of phosphopeptides for MALDI MS analysis

Protein phosphorylation is one of the most important post-translational modifications (PTM), however, the detection of phosphorylation in proteins using mass spectrometry (MS) remains challenging. This is because many phosphorylated proteins are only present in low abundance, and the ionization of the phosphorylated components in MS is very inefficient compared to the non-phosphorylated counterparts. Recently, we have reported a selective injection technique that can separate phosphopeptides from non-phosphorylated peptides due to the differences in their isoelectric points (pI) [1]. Phosphorylated peptides from α-casein were clearly observed at low femtomole level using MALDI MS. In this work, further developments on selective injection of phosphopeptides are presented to enhance its capability in handling higher sample complexity. The approach is to integrate selective injection with a sample stacking technique used in capillary electrophoresis to enrich the sample concentration, followed by electrophoresis to fractionate the components in preparation for MALDI MS analysis. The effectiveness of the selective injection and stacking was evaluated quantitatively using a synthetic phosphopeptide as sample, with an enrichment factor of up to 600 being recorded. Next, a tryptic digest of α-casein was used to evaluate the separation and fractionation of peptides for MALDI MS analysis. The elution order of phosphopeptides essentially followed the order of decreasing number of phosphates on the peptides. Finally, to illustrate the applicability, the integrated procedure was applied to evaluate the phosphorylation of a highly phosphorylated protein, osteopontin. Up to 41 phosphopeptides were observed, which allowed us to examine the phosphorylation of all 29 possible sites previously reported [2]. A high level of heterogeneity in the phosphorylation of OPN was evident by the multiple-forms of variable phosphorylation detected for a large number of peptides.     

Mass spectrometric approaches for the characterization of proteins on a hybrid quadrupole time-of-flight (Q-TOF) mass spectrometer

This study demonstrates structural and conformational characterization of proteins by nanoflow electrospray ionization (nanoESI) mass spectrometry (MS) and tandem mass spectrometry (MS/MS) utilizing a quadrupole time-of-flight (Q-TOF) mass spectrometer (Micromass, Manchester, England). Model peptides were successfully sequenced at the 35 attomole (amol) level, and peptides derived from a tryptic in-gel digest of 25 femtomole (fmol) bovine serum albumin (BSA) were successfully sequenced. The results demonstrated that the MS/MS sensitivity of the Q-TOF clearly surpassed the detection limit of the silver stain. A silver destaining step greatly improved the mass analysis of peptides derived from in-gel digests. Interestingly, sequence analysis revealed BSA residue 424 (tyrosine) as a potential chlorination site. In addition, a modified procedure was successfully used to extract and measure the masses of two-dimensional polyacrylamide gel electrophoresis (2-D PAGE)-resolved proteins in the 10-68.5 kDa range. The Q-TOF was also used to monitor conformational changes of proteins. These experiments demonstrated an acid-induced denaturation of BSA in the pH 3-4 range, and heat-induced unfolding of cytochrome c between 50 and 60 degrees C. Finally, Zn2+ binding was demonstrated for the carbonic anhydrase apoprotein. In summary, the wide range of applications and the high quality of the experimental data made the Q-TOF mass spectrometer a powerful analytical tool for protein characterization.