Comparison of nitride-based dual-wavelength light- emitting diodes with an InAlN electron-blocking layer and with p-type doped barriers

The advantages of nitride-based dual-wavelength light-emitting diodes (LEDs) with an InAlN electron blocking layer (EBL) are studied. The emission spectra,carrier concentration in the quantum wells (QWs),energy band and internal quantum efficiency (IQE) are investigated. The simulation results indicate that an LED with an InAlN EBL performs better over a conventional LED with an AlGaN EBL and an LED with p-type-doped QW barriers. All of the advantages are due to the enhancement of carrier confinement and the lower electron leakage current. The simulation results also show that the efficiency droop is markedly improved and the luminous intensity is greatly enhanced when an InAlN EBL is used.     

新型电子阻挡层结构对蓝光InGaN发光二极管性能的提高

分别对3种不种电子阻挡层的蓝光AlGaN LED进行数值模拟研究。3种阻挡层结构分别为传统AlGaN电子阻挡层,AlGaN-GaN-AlGaN电子阻挡层和Al组分渐变的AlGaN-GaN-AlGaN电子阻挡层。此外对这对三种器件的活性区的载流子浓度、能带图、静电场和内量子效率进行比较和分析。研究结果表明,相较于传统AlGaN和AlGaN-GaN-AlGaN两种电子阻挡层的LED,具有Al组分渐变的AlGaN-GaN-AlGaN电子阻挡层结构的LED具有较高的空穴注入效率、较低的电子外溢现象和较小的静电场(活性区)。同时,具有Al组分渐变的AlGaN-GaN-AlGaN电子阻挡层结构的LED的efficiency droop现象也得到一定的缓解。     

Performance enhancement of an InGaN light-emitting diode with an AlGaN/InGaN superlattice electron-blocking layer

The efficiency enhancement of an InGaN light-emitting diode(LED) with an AlGaN/InGaN superlattice(SL)electron-blocking layer(EBL) is studied numerically,which involves the light-current performance curve,internal quantum efficiency electrostatic field band wavefunction,energy band diagram carrier concentration,electron current density,and radiative recombination rate.The simulation results indicate that the LED with an AlGaN/InGaN SL EBL has better optical performance than the LED with a conventional rectangular AlGaN EBL or a normal AlGaN/GaN SL EBL because of the appropriately modified energy band diagram,which is favorable for the injection of holes and confinement of electrons.Additionally,the efficiency droop of the LED with an AlGaN/InGaN SL EBL is markedly improved by reducing the polarization field in the active region.     

Performance improvement of blue light-emitting diodes with an AlInN/GaN superlattice electron-blocking layer

The characteristics of a blue light-emitting diode (LED) with an AlInN/GaN superlattice (SL) electron-blocking layer (EBL) are analyzed numerically. The carrier concentrations in the quantum wells, energy band diagrams, electrostatic fields, and internal quantum efficiency are investigated. The results suggest that the LED with an AlInN/GaN SL EBL has better hole injection efficiency, lower electron leakage, and smaller electrostatic fields in the active region than the LED with a conventional rectangular AlGaN EBL or a AlGaN/ GaN SL EBL. The results also indicate that the efficiency droop is markedly improved when an AlInN/GaN SL EBL is used.     

Performance improvement of blue InGaN light-emitting diodes with a specially designed n-AlGaN hole blocking layer

Blue InGaN light-emitting diodes (LEDs) with a conventional electron blocking layer (EBL), a common n-AlGaN hole blocking layer (HBL), and an n-AlGaN HBL with gradual Al composition are investigated numerically, which involves analyses of the carrier concentration in the active region, energy band diagram, electrostatic field, and internal quantum efficiency (IQE). The results indicate that LEDs with an n-AlGaN HBL with gradual Al composition exhibit better hole injection efficiency, lower electron leakage, and a smaller electrostatic field in the active region than LEDs with a conventional p-AlGaN EBL or a common n-AlGaN HBL. Meanwhile, the efficiency droop is alleviated when an n-AlGaN HBL with gradual Al composition is used.     

Improvement of characteristics of InGaN light-emitting diode by using a staggered AlGaN electron-blocking layer

The optical and physical properties of InGaN light-emitting diode (LED) with a specific design of staggered AlGaN electron-blocking layer (EBL) are investigated numerically in detail. The electrostatic field distribution, energy band, carrier concentration, electroluminescence (EL) intensity, internal quantum efficiency (IQE), and the output power are simulated. The results reveal that this specific design has a remarkable improvement of optical performance compared with the design of conventional LED. The lower electron leakage current, higher hole injection efficiency, and consequently mitigated efficiency droop are achieved. The significant decrease of electrostatic field at the interface between the last barrier and the EBL of LED could be one of the main reasons for these improvements.     

Improvement of characteristics of an InGaN light-emitting diode by using a staggered AlGaN electron-blocking layer

The optical and physical properties of an InGaN light-emitting diode (LED) with a specific design of a staggered AlGaN electron-blocking layer (EBL) are investigated numerically in detail. The electrostatic field distribution, energy band, carrier concentration, electroluminescence (EL) intensity, internal quantum efficiency (IQE), and the output power are simulated. The results reveal that this specific design has a remarkable improvement in optical performance compared with the design of a conventional LED. The lower electron leakage current, higher hole injection efficiency, and consequently mitigated efficiency droop are achieved. The significant decrease of electrostatic field at the interface between the last barrier and the EBL of the LED could be one of the main reasons for these improvements.     

Performance improvement of InGaN blue light-emitting diodes with several kinds of electron-blocking layers

The performance of InGaN blue light-emitting diodes(LEDs) with different kinds of electron-blocking layers is investigated numerically.We compare the simulated emission spectra,electron and hole concentrations,energy band diagrams,electrostatic fields,and internal quantum efficiencies of the LEDs.The LED using AlGaN with gradually increasing Al content from 0% to 20% as the electron-blocking layer(EBL) has a strong spectrum intensity,mitigates efficiency droop,and possesses higher output power compared with the LEDs with the other three types of EBLs.These advantages could be because of the lower electron leakage current and more effective hole injection.The optical performance of the specifically designed LED is also improved in the case of large injection current.     

Improved performance of near UV light-emitting diodes with a composition-graded p-AlGaN irregular sawtooth electron-blocking layer

We investigate the performances of the near-ultraviolet(about 350 nm-360 nm) light-emitting diodes(LEDs) each with specifically designed irregular sawtooth electron blocking layer(EBL) by using the APSYS simulation program.The internal quantum efficiencies(IQEs),light output powers,carrier concentrations in the quantum wells,energy-band diagrams,and electrostatic fields are analyzed carefully.The results indicate that the LEDs with composition-graded pAl_xGa_(1-x)N irregular sawtooth EBLs have better performances than their counterparts with stationary component p-AlGaN EBLs.The improvements can be attributed to the improved polarization field in EBL and active region as well as the alleviation of band bending in the EBL/p-AlGaN interface,which results in less electron leakage and better hole injection efficiency,thus reducing efficiency droop and enhancing the radiative recombination rate.     

Improvement of radiative recombination rate in deep ultraviolet laser diodes with step-like quantum barrier and aluminum-content graded electron blocking layer

The design of the active region structures, including the modifications of structures of the quantum barrier(QB) and electron blocking layer(EBL), in the deep ultraviolet(DUV) Al Ga N laser diode(LD) is investigated numerically with the Crosslight software. The analyses focus on electron and hole injection efficiency, electron leakage, hole diffusion,and radiative recombination rate. Compared with the reference QB structure, the step-like QB structure provides high radiative recombination and maximum output power. Subsequently, a comparative study is conducted on the performance characteristics with four different EBLs. For the EBL with different Al mole fraction layers, the higher Al-content Al Ga N EBL layer is located closely to the active region, leading the electron current leakage to lower, the carrier injection efficiency to increase, and the radiative recombination rate to improve.     

Enhancement in hole-injection efficiency of blue InGaN light-emitting diodes from reduced polarization by some specific designs for the electron blocking layer

Some specific designs on the electron blocking layer (EBL) of blue InGaN LEDs are investigated numerically in order to improve the hole injection efficiency without losing the blocking capability of electrons. Simulation results show that polarization-induced downward band bending is mitigated in these redesigned EBLs and, hence, the hole injection efficiency increases markedly. The optical performance and efficiency droop are also improved, especially under the situation of high current injection.     

Characteristics of deep ultraviolet AlGaN-based light emitting diodes with p-hBN layer

The AlGaN-based deep ultraviolet (DUV) light-emitting diodes (LEDs) with p-hBN layer are investigated numerically. In comparison with the conventional AlGaN DUV LEDs, the proposed LED can significantly improve the carrier injection, radiative efficiency, as well as the electroluminescence (EL) intensity under the same applied forward bias. Simultaneously, the light extraction efficiency in the LED using p-hBN instead of p-AlGaN exhibits a more than 250% increase at the applied voltage of 7.5 V due to the smaller loss of reflection and absorption of the emitted light.     

量子阱数量变化对InGaN/AlGaN LED的影响

采用软件理论分析的方法分析了InGaN/AlGaN量子阱数量变化对发光二极管内量子效率、电子空穴浓度分布、载流子溢出产生的影响。分析结果表明:量子阱的个数不是越多越好,LED的光学性质和量子阱的个数并不成线性关系。量子阱个数太少时,电流溢出现象较明显;而当量子阱个数太多时,极化现象明显,且会造成材料浪费。因此应根据工作电流选择合适的量子阱个数。     

Improvement of the carrier distribution with GaN/InGa N/AlGaN/InGaN/GaN composition-graded barrier for InGaN-based blue light-emitting diode

In Ga N light-emitting diodes(LEDs) with Ga N/In Ga N/Al Ga N/In Ga N/Ga N composition-graded barriers are proposed to replace the sixth and the middle five Ga N barriers under the condition of removing the electron blocking layer(EBL)and studied numerically in this paper. Simulation results show that the specially designed barrier in the sixth barrier is able to modulate the distributions of the holes and electrons in quantum well which is adjacent to the specially designed barrier. Concretely speaking, the new barrier could enhance both the electron and hole concentration remarkably in the previous well and reduce the hole concentration for the latter one to some extent along the growth direction. What is more,a phenomenon, i.e., a better carrier distribution in all the wells, just appears with the adoption of the new barriers in the middle five barriers, resulting in a much higher light output power and a lower efficiency droop than those in a conventional LED structure.     

Improved carrier injection and confinement in InGaN light-emitting diodes containing GaN/AlGaN/GaN triangular barriers

In this study, an InGaN lighting-emitting diode(LED) containing GaN/AlGaN/GaN triangular barriers is proposed and investigated numerically. The simulation results of output performance, carrier concentration, and radiative recombination rate indicate that the proposed LED has a higher output power and an internal quantum efficiency, and a lower efficiency droop than the LED containing conventional GaN or AlGaN barriers. These improvements mainly arise from the modified energy bands, which is evidenced by analyzing the LED energy band diagram and electrostatic field near the active region.The modified energy bands effectively improve carrier injection and confinement, which significantly reduces electron leakage and increases the rate of radiative recombination in the quantum wells.     

Enhanced carrier injection in InGaN/GaN multiple quantum wells LED with polarization-induced electron blocking barrier

In this report, we designed a light emitting diode (LED) structure in which an N-polar p-GaN layer is grown on top of Ga-polar In_0.1Ga_0.9N/GaN quantum wells (QWs) on an n-GaN layer. Numerical simulation reveals that the large polarization field at the polarity inversion interface induces a potential barrier in the conduction band, which can block electron overflow out of the QWs. Compared with a conventional LED structure with an Al_0.2Ga_0.8N electron blocking layer (EBL), the proposed LED structure shows much lower electron current leakage, higher hole injection, and a significant improvement in the internal quantum efficiency (IQE). These results suggest that the polarization induced barrier (PIB) is more effective than the AlGaN EBL in suppressing electron overflow and improving hole transport in GaN-based LEDs.     

Efficiency droop suppression in GaN-based light-emitting diodes by chirped multiple quantum well structure at high current injection

Gallium nitride(Ga N) based light-emitting diodes(LEDs) with chirped multiple quantum well(MQW) structures have been investigated experimentally and numerically in this paper. Compared to conventional LEDs with uniform quantum wells(QWs), LEDs with chirped MQW structures have better internal quantum efficiency(IQE) and carrier injection efficiency. The droop ratios of LEDs with chirped MQW structures show a remarkable improvement at 600 m A/mm2,reduced down from 28.6%(conventional uniform LEDs) to 23.7%(chirped MQWs-a) and 18.6%(chirped MQWs-b),respectively. Meanwhile, the peak IQE increases from 76.9%(uniform LEDs) to 83.7%(chirped MQWs-a) and 88.6%(chirped MQWs-b). The reservoir effect of chirped MQW structures is the significant reason as it could increase hole injection efficiency and radiative recombination. The leakage current and Auger recombination of chirped MQW structures can also be suppressed. Furthermore, the chirped MQWs-b structure with lower potential barriers can enhance the reservoir effect and obtain further improvement of the carrier injection efficiency and radiative recombination, as well as further suppressing efficiency droop.     

Investigations on AlGaN‐Based Deep‐Ultraviolet Light‐Emitting Diodes With Si‐Doped Quantum Barriers of Different Doping Concentrations

In this work, we investigate the impact of Si doped AlGaN quantum barriers on the optical powers for [0001] oriented III‐nitride based deep‐ultraviolet light‐emitting diodes (DUV LEDs). The polarization‐induced electric field in the active region is screened as the result of Si‐doped quantum barriers, which gives rise to the improved spatial overlap between electron and hole wave functions. The polarization screening effect within the quantum wells is further proven by the observation of the blue shift for the wavelength. However, the hole distribution across the active region can be significantly retarded if the Si dosage in the quantum barriers is too high. Therefore, the improved radiative recombination within the active region can be realized provided that the Si dosage in the quantum barriers is moderately adjusted to guarantee both the better hole injection efficiency and the screened polarization effect in the multiple quantum wells.     

Investigation of blue InGaN light-emitting diodes with p-AlGaN/InGaN superlattice interlayer

The blue InGaN light-emitting diodes (LEDs), employing a lattice-compensated p-AlGaN/InGaN superlattice (SL) interlayer to link the last quantum barrier and electron blocking layer (EBL), are proposed and investigated numerically. The simulation results indicate that the newly designed LEDs have better hole injection efficiency, lower electron leakage, and smaller electrostatic fields in the active region over the conventional LEDs mainly attributed to the mitigated polarization-induced downward band bending. Furthermore, the markedly improved output power and efficiency droop are also suggested when the conventional LEDs corresponding to experiment data are replaced by the newly designed LEDs.     

Improved performance of InGaN light-emitting diodes with a novel sawtooth-shaped electron blocking layer

A sawtooth-shaped electron blocking layer is proposed to improve the performance of light-emitting diodes （LEDs）. The energy band diagram, the electrostatic field in the quantum well, the carrier concentration, the electron leakage, and the internal quantum efficiency are systematically studied. The simulation results show that the LED with a sawtooth-shaped electron blocking layer possesses higher output power and a smaller efficiency droop than the LED with a conventional A1GaN electron blocking layer, which is because the electron confinement is enhanced and the hole injection efficiency is improved by the appropriately modified electron blocking layer energy band.