吡啶-芴类电荧光聚合物的光谱特性

用Suzuiki聚合反应将二溴代吡啶 (2 ,5 、2 ,6 、3,5 取代 )与芴共聚 ,合成了不同主链结构的吡啶 芴共聚物 .研究结果表明 ,将吡啶基引人聚芴主链可以调节共聚物的发光颜色 .间位吡啶基引入聚芴主链 ,使聚合物的能级加宽 ,PL、EL光谱发生蓝移 ;对位吡啶基则使光谱红移 .间位吡啶基 (3,5 Py、2 ,6 Py)引入聚芴主链 ,可提高聚合物的色纯度 .共聚物中 3,5 Py含量为 4 0mol%时 ,可得到较纯的蓝光 .     

Novel Soluble Fluorene–Thienothiadiazole and Fluorene–Carbazole Copolymers for Optoelectronics

Summary: Optical, photophysical, electrochemical and photoelectrical properties of novel soluble low-bandgap fluorene – thienothiadiazole based copolymers ( CHTF and CDTF ) and luminescent fluorene – carbazole copolymers, ( CFCzE and CFCZA ) were studied. Fluorene – thienothiadiazole copolymers exhibit in thin films long-wavelength absorption with maxima at 750 – 785 nm and possess low bandgap, high electron affinity and exhibit reversible electrochromic behaviour. Therefore they are of interest for electrochromic and photovoltaic applications. Spectroelectrochemical study was performed and optical switching was demonstrated. Photovoltaic devices with bulk heterojunction made of blends of copolymers and fullerene derivative [60]PCBM were prepared. The power conversion efficiency was 2–3%. On the other hand, the fluorene-carbazole copolymers exhibit blue photoluminescence with high quantum efficiency in solution and also in thin films. Light-emitting devices with intensive broad bluish-green-white emission were fabricated.     

Novel Fluorene-Thiophene Copolymers: Synthesis,Photophysical and Electrochemical Properties

Summary: Novel alternating fluorene - thiophene copolymers, F3HT, FIPT , and FPyT , consisting of 9,9-dihexylfluorene and 3-substituted (with hexyl, 3-methylbutyl and 2-(pyren-1-yl)vinyl, respectively) thiophene units were synthesized. Photoluminescence (PL) and electrochemical behavior of these polymers were studied. PL behavior of FPyT polymer differed from that of the other copolymers. Thin films of F3HT and FIPT showed an intense green PL emission whereas the PL emission of FPyT thin films was orange. The PL emission spectra in thin films differ from those measured in THF solutions. Aggregate formation played an important role in the solid state. The aggregation was more pronounced with FPyT than with F3HT and FIPT thin films. In all polymers reversible oxidation and reduction were observed. Similar values of ionization potentials and electron affinities were estimated for F3HT and FIPT , but a higher value of electron affinity for FPyT .     

Rod-coil block copolymers incorporating terfluorene segments for stable blue light emission

Spectroscopic studies on a series of rod-coil block copolymers with terfluorene as the rigid segment demonstrate that the main cause of color instability in fluorene oligomers and polymers is aggregate and/or excimer formation and not the presence alone of keto defects (fluorenone formation) along the molecular chain. Keto defects, when present, contribute to the appearance of the undesirable "green" emission band but are not the leading cause of color instability. Thus, the synthesis of materials where aggregation and/or interchain, intersegment interactions are inhibited is the key approach for the production of stable polymeric light-emitting devices (PLED's). The potential of this method is verified by the synthesis of photooxidative stable fluorene/styrene diblock copolymer blue emitters.     

Simulated annealing study of asymmetric diblock copolymer thin films

We report a simulated annealing study of the morphology of asymmetric diblock copolymer thin films confined between two homogeneous and identical surfaces. We have focused on copolymers that form a gyroidal morphology in the bulk. The morphological dependence of the confined films on the film thickness and the surface-polymer interaction has been systematically investigated. From the simulations it is found that much richer morphologies can form for the gyroid-forming asymmetric diblock copolymer thin films, in contrast to the lamella-forming symmetric and cylinder-forming asymmetric diblock copolymer films. Multiple morphological transitions induced by changing the film thickness and polymer-surface interactions are observed.     

Enhanced efficiency of polyfluorene derivatives: Organic–inorganic hybrid polymer light‐emitting diodes

Two novel organic–inorganic hybrid polyfluorene derivatives, poly{(9,9′‐dioctyl‐2,7‐fluorene)‐co‐(9,9′‐di‐POSS‐2,7‐fluorene)‐co‐[2,5‐bis(octyloxy)‐1,4‐phenylene]} (PFDOPPOSS) and poly{(9,9′‐dioctyl‐2,7‐fluorene)‐co‐(9,9′‐di‐POSS‐2,7‐fluorene)‐co‐bithiophene} (PFT2POSS), were synthesized by the Pd‐catalyzed Suzuki reaction of polyhedral oligomeric silsesquioxane (POSS) appended fluorene, dioctyl phenylene, and bithiophene moieties. The synthesized polymers were characterized with ¹H NMR spectroscopy and elemental analysis. Photoluminescence (PL) studies showed that the incorporation of the POSS pendant into the polyfluorene derivatives significantly enhanced the fluorescence quantum yields of the polymer films, likely via a reduction in the degree of interchain interaction as well as keto formation. Additionally, the blue‐light‐emitting polyfluorene derivative PFDOPPOSS showed high thermal color stability in PL. Moreover, single‐layer light‐emitting diode devices of an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/polymer/Ca/Al configuration fabricated with PFDOPPOSS and PFT2POSS showed much improved brightness, maximum luminescence intensity, and quantum efficiency in comparison with devices fabricated with the corresponding pristine polymers PFDOP and PFT2. In particular, the maximum external quantum efficiency of PFT2POSS was 0.13%, which was twice that of PFT2 (0.06%), and the maximum current efficiency of PFT2POSS was 0.38 cd/A, which again was twice that of PFT2 (0.19 cd/A). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2943–2954, 2006     

Stereocomplex Crystallization in Asymmetric Diblock Copolymers Studied by Dynamic Monte Carlo Simulations

Stereocomplex crystallization in asymmetric diblock copolymers was studied using dynamic Monte Carlo simulations, and the key factor dominating the formation of stereocomplex crystallites(SCs) was uncovered. The asymmetric diblock copolymers with higher degree of asymmetry exhibit larger difference between volume fractions of beads of different blocks, and local miscibility between different kinds of beads is lower, leading to lower SC content. To minimize the interference from volume fraction of beads, the SC formation in blends of asymmetric diblock copolymers was also studied. For the cases where the volume fractions of beads of different blocks are the same, similar local miscibility between beads of different blocks and similar SC content was observed. These findings indicate that the volume fraction of beads of different blocks is a key factor controlling the SC formation in the asymmetric diblock copolymers. The SC content can be regulated by adjusting the difference between the contents of beads of different blocks in asymmetric diblock copolymers.     

Synthesis and Self-Association of Stimuli-Responsive Diblock Copolymers by Living Cationic Polymerization

The living cationic polymerization of several functional monomers in the presence of an added base is investigated as a possible preparation of a new series of water-soluble or stimuli-responsive copolymers. Under appropriate conditions, the polymerization allows the selective preparation of polymers with various shapes and different sequence distributions of monomer units, including stimuli-responsive block copolymers, gradient copolymers, poly(vinyl alcohol) graft copolymers, and star-shaped polymers. The stimuli-induced self-association of the diblock copolymers is also examined. An aqueous solution of the diblock copolymer with a thermo-sensitive segment undergoes rapid physical gelation upon warming to the critical temperature to give a transparent gel, and returns sensitively to the solution state upon cooling. The sharp transition of stimuli-responsive segments with highly controlled primary structure turns out to play an important role in the self-association. Small-angle neutron scattering, dynamic light scattering, and electron microscopy studies reveal that the physical gelation involves a thermosensitive micellization of diblock copolymers (core size: 18-20 nm) and subsequent micelle macrolattice formation (bcc symmetry). Based on the gelation mechanism, several stimuli-responsive gelation systems are achieved using other stimuli such as the addition of a selective solvent or compound, cooling, pH change, and irradiation with ultraviolet light.     

High‐Density Liquid‐Crystalline Polymer Brushes Formed by Surface Segregation and Self‐Assembly

High‐density polymer brushes on substrates exhibit unique properties and functions stemming from the extended conformations due to the surface constraint. To date, such chain organizations have been mostly attained by synthetic strategies of surface‐initiated living polymerization. We show herein a new method to prepare a high‐density polymer brush architecture using surface segregation and self‐assembly of diblock copolymers containing a side‐chain liquid‐crystalline polymer (SCLCP). The surface segregation is attained from a film of an amorphous base polymer (polystyrene, PS) containing a minor amount of a SCLCP‐PS diblock copolymer upon annealing above the glass‐transition temperature. The polystyrene portion of the diblock copolymer can work as a laterally mobile anchor for the favorable self‐assembly on the polystyrene base film.     

Effects of the H-bond donor structure on the properties of supramolecular side chain liquid crystalline polymers based on poly(3-carboxypropylmethylsiloxane-co-dimethylsiloxane)s and stilbazoles

Supramolecular side chain liquid crystalline polymers (SCLCPs) based on poly(3-carboxypropylmethylsiloxane-co-dimethylsiloxane) (PSIX, X=100, 76, 60, 41 or 23, denoting the mole percentage of 3-carboxypropylmethylsiloxane unit in the polymer) and stilbazole derivatives have been obtained through intermolecular hydrogen bonding (H-bonding) interactions between the carboxylic acid and the pyridyl moieties. The formation of H-bonding and self-assembly results in the formation of new mesogenic units, in which H-bonds function as molecular connectors. FTIR shows the existence of H-bonding in the complexes. The polymeric complexes behave as single component liquid crystalline polymers and exhibit stable and enantiotropic mesophases. The liquid crystalline properties of the supramolecular SCLCPs were studied using differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction, and were found to exhibit smectic A phases with focal-conic textures. The thermal stability of the SCLCP increases on increasing the carboxylic acid content in the polysiloxane and the concentration of the stilbazole derivative in the complex. However, the thermal stability decreases on increasing the chain length of the stilbazole derivative. The crystal phase was not formed even on cooling to the glass transition temperature of the polymeric complex.     

Surface-initiated, ring-opening metathesis polymerization: formation of diblock copolymer brushes and solvent-dependent morphological changes

In this article, we report the formation of diblock copolymer brushes on a gold surface by surface-initiated, ring-opening metathesis polymerization (SI-ROMP) with the newly developed ruthenium catalyst [(H2IMes)(3-Br-py)2(Cl)2Ru=CHPh]. Taking advantage of the highly improved activity of the ruthenium catalyst and the rapid initiation step of ROMP, we successfully formed thin films of well-defined block copolymers with 5-norbornene-2-endo,3-endo-dimethanol and norbornene carboxylic acid methyl esters (44:56 endo/exo). The catalyst was found to be active enough to polymerize endo isomers of norbonene derivatives from the surface as well as to form diblock copolymer brushes. SI-ROMP of diblock copolymers from the surface was confirmed by ellipsometry, infrared spectroscopy, and X-ray photoelectron spectroscopy. After the formation, the polymer-grafted substrates were immersed in various solvents, and the selective swelling characteristics of polymer brushes were investigated by atomic force microscopy.     

Charges of soluble amphiphiles and particles: random and diblock copolymerizations of MAA/AAm,MAA/St,and MAA/4VP in ethanol

Random and reversible addition-fragmentation chain transfer (RAFT) copolymerizations of methacrylic acid (MAA)/acrylamide (AAm), MAA/styrene (St), and MAA/4-vinyl pyridine (4VP) were carried out in ethanol. (CPDB)-terminated PMAA (PMAA-CPDB) and 2,2′-azobis(2,4-diemthylvaleronitrile) (V-65) was used as the macromolecular chain transfer agent (CTA) and initiator, respectively. Electric conductivity of copolymerization systems was traced throughout the polymerizations, and charges of soluble copolymer and particles were detected. As a result, a considerable increase of conductivity was observed in all of the RAFT polymerization systems, whereas the variation of conductivity in the random copolymerization systems was insignificant. The high conductivity of RAFT polymerization was dominantly contributed by the soluble diblock copolymers in the serum, rather than their particles, except for P(MAA-b-4VP) where only the particles was obtained due to the zwitterionic interactions of PMAA segments and 4VP. In the direct current (DC) field, the behavior of these soluble diblock copolymers, P(MAA-b-AAM) and P(MAA-b-St), indicated that they were positively charged, whereas the particles of (PMAA-b-AAm) and P(MAA-b-4VP) were surprisingly negatively charged, though the composition of MAA was dominant. Soluble random copolymers of P(MAA-co-St) and P(MAA-co-4VP) represented the charge neutrality. These results indicated that the positive charges were contributed by the solvophobic block in the soluble diblock copolymers. Therefore, the diblock copolymers were the macrodipoles boosting the conductivity of solution. Meanwhile, it indicated that the electrostatic interactions of dipoles were possibly the main driving force of their self-assembly. Generally, compared with RAFT polymerization, the particles were hard to be prepared in the random copolymerization. It implies that the electrostatic interactions of diblock copolymers also played an important role in the particle formation.

Multiple endothermic melting behavior in poly(tetramethylene terephthalate)-containing polyesters and block copolyether-esters

The multiple endothermic behavior of poly(tetramethylene terephthalate) (PTMT) and its random and block copolymers with poly(tetramethylene isophthalate) (PTMI) and poly(tetramethylene oxide) (PTMO) is described. The differential scanning calorimetry heating scans of these polymers exhibit up to four endotherms. Endotherm I, the lowest-temperature endotherm, is an annealing peak and is ascribed to a clustering of PTMT sequences. Endotherms II, III, and IV are associated with crystal populations originated during periods of isothermal crystallization, cooling, and heating, respectively. The dependence of the endotherms on sample composition, crystallization and annealing temperatures, crystallization and annealing times, and sample cooling and heating rate is discussed.     

Control of pore size and pore uniformity in films based on self‐assembling block copolymers

Blends of self‐assembling polystyrene‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) diblock‐copolymers and poly(4‐vinyl pyridine) (P4VP) homopolymers were used to fabricate isoporous and nanoporous films. Block copolymers (BCP) self‐assembled into a structure where the minority component forms very uniform cylinders, while homopolymers, resided in the core of the cylinders. Selective removal of the homopolymers by ethanol immersion led to the formation of well‐ordered pores. In films without added homopolymer, just immersion in ethanol and subsequent swelling of the P4VP blocks was found to be sufficient to create pores. Pore sizes were tuned between 10 and 50 nm by simply varying the homopolymer content and the molecular weight of the block‐copolymer. Uniformity was lost when the average pore size exceeded 30 nm because of macrophase separation. However, preparation of films from low M_W diblock copolymers showed that it is possible to have excellent pore size control and a high porosity, while retaining a low pore size distribution. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1568–1579     

Zinc(II)-induced color-tunable fluorescence emission in the pi-conjugated polymers composed of the bipyridine unit: a way to get white-light emission

A series of fluorene and bipyridine (bpy) copolymers were synthesized, and their optical properties were investigated in the presence of zinc(II). By adjusting the bpy content in the polymer backbone, the emitting color of the polymer solution could be tuned from initial blue to green to white and violet when it interacted with zinc(II) ions. The counteranions of zinc(II) ions were also found to influence the optical properties of copolymers greatly.     

Antimicrobial and hemolytic activities of copolymers with cationic and hydrophobic groups: a comparison of block and random copolymers

Random and diblock copolymers of 2-(N,N-dimethylamino)ethyl methacrylate and butyl methacrylate are prepared by ATRP. As mimics of cationic antimicrobial peptides, the random and diblock copolymers show similar antimicrobial activities. In contrast, the diblock copolymers have much lower hemolytic activities than the random copolymers. The cell selectivity (HC(50)/MIC, where HC(50) is the concentration to lyse 50% of human red blood cells and MIC is the minimum concentration to inhibit bacterial growth) of the diblock copolymers are 150 to 27,500 times higher than that of random copolymers with similar compositions.     

荧光标记法研究双嵌段共聚物的胶束化行为

结合Forster能量转移和芳香分子极性标尺技术,研究了两端分别标记芴和芘基团、具有不相容双嵌段的共聚物(Fl-PMMA400-b-PAA80-Py)的胶束化行为。结果表明,在临界胶束浓度以下,较长的PMMA链段首先形成寡链聚集体,这一现象反映了具有不相容双嵌段的共聚物胶束化特征;此外,本文首次发现芴基团荧光对其微环境极性较为敏感。     

Surface segregation of polypeptide-based block copolymer micelles: An approach to engineer nanostructured and stimuli responsive surfaces

We describe the surface segregation of polypeptide-based block copolymer micelles to produce stimuli-responsive nanostructures at the polymer blend/air interface. Such structures were obtained by simultaneous surface migration and self assembly at the surface of diblock copolymer/homopolymer blends. We employed blends composed of homopolymer (PS) and an amphiphilic block copolymer polystyrene-b-poly(l-glutamic acid) (PS-b-PGA). The surface was functionalized based on the preferential segregation to the polymer blend/air interface of the hydrophilic PGA block of the diblock copolymer upon annealing to water vapor. The surface migration of the diblock copolymer to the interface was demonstrated both by XPS and contact angle measurements. As a consequence, the PGA interfacial attraction leads to a large surface excess on diblock copolymer which in turn, through macrophase and microphase separation, produced separated domains at the surface with regions composed either of homo or block copolymer. Herein we demonstrate that the use of asymmetric diblock copolymers with a higher content in PS lead to spherical micellar assemblies randomly distributed at the surface. As observed by AFM imaging the blend composition, i.e. the amount of block copolymer within the blend influences the density of micelles at the surface. Finally, when exposed to water, the pH affects the surface morphology. The PGA segments are collapsed at low pH values and extended at pH values above 4.8, thus inducing variations on the topography of the films at the nanometer scale.     

Responsive polymer/gold nanoparticle composite thin films fabricated by solvent-induced self-assembly and spin-coating

Self-assembled poly(4-vinylpyridine)-grafted gold (Au) nanoparticles (NPs) and polystyrene-b-poly(4-vinylpyridine) block copolymers were fabricated by the introduction of a selective solvent to a common solution. The assembled mixtures were spin-coated onto solid substrates to fabricate composite gold/polymer thin films composed of copolymer-hybridized Au NPs and independent copolymer micelles. The obtained composite Au thin films had variable localized surface plasmon resonance (LSPR) bands and microscopic morphologies upon vapor annealing with selective solvents because the adsorption and dissolving of solvent molecules into the films could rearrange the copolymer block. The hybrid nanostructured Au thin films may have potential in vapor sensing and organic assays.     

Defect-free nanoporous thin films from ABC triblock copolymers

The self-assembly of triblock copolymers of poly(ethylene oxide-b-methyl methacrylate-b-styrene) (PEO-b-PMMA-b-PS), where PS is the major component and PMMA and PEO are minor components, provides a robust route to highly ordered, nanoporous arrays with cylindrical pores of 10-15 nm that show promise in block copolymer lithography. These ABC triblock copolymers were synthesized by controlled living radical polymerization, and after solvent annealing, thin films showing defect-free cylindrical microdomains were obtained. The key to the successful generation of highly regular, porous thin films is the use of PMMA as a photodegradable mid-block which leads to nanoporous structures with an unprecedented degree of lateral order. The power of using a triblock copolymer when compared to a traditional diblock copolymer is evidenced by the ability to exploit and combine the advantages of two separate diblock copolymer systems, the high degree of lateral ordering inherent in PS-b-PEO diblocks plus the facile degradability of PS-b-PMMA diblock copolymer systems, while negating the corresponding disadvantages, poor degradability in PS-b-PEO systems and no long-range order for PS-b-PMMA diblocks.