苯并二噁唑系列聚合物的合成及表征

以4,6-二氨基-1,3-苯二酚盐酸盐为原料,分别和对苯二甲酸、1,4-萘二甲酸、2,6-萘二甲酸、2,5-噻吩二甲酸、4,4-′(1,2-二苯基乙烯)二甲酸在多聚磷酸介质中反应,合成单环的聚(1,4-亚苯基)苯并二噁唑(PBO)、稠环的聚(1,4-亚萘基)苯并二噁唑(1,4-PNBO)和聚(2,6-亚萘基)苯并二噁唑(2,6-PNBO)、杂环的聚(2,5-亚噻吩基)苯并二噁唑(PTBO)及含有两个苯环的聚-4,4′-亚(1,2-二苯乙烯基)苯并二噁唑(4,4′-PDPEBO).采用傅立叶红外光谱、热重分析、元素分析、特性黏数分析对系列聚合物进行了表征.研究结果表明PBO、1,4-PNBO、4,4-′PDPEBO、2,6-PNBO和PTBO 5种聚合物的耐热性能依次降低,特性黏数依次为25.40、16.76、20.63、15.38和14.63 dL/g.     

液晶高分子聚苯撑苯并二噁唑的合成、结构与性能

本文以间苯二酚为原料,合成了缩聚单体4,6-二胺基1,3-间苯二酚盐酸盐。在多聚磷酸介质中与对苯二甲酸经分段升温缩聚得聚苯撑苯并二噁唑(PBZO).用元素分析法,X-光衍射法、X-光平板照相、FTIR和C~(13)-NMR研究了PBZO的结构.测定了PBZO/MSA体系的特性粘数。测定了PBZO的力学性能和热稳定性。结果表明PBZO是继PBZT后又一种新型的高性能液晶高分子材料。     

聚亚苯基苯并二噁唑缩聚反应动力学

以4,6-二氨基间苯二酚磷酸盐(DAR.2HP3O4)和对苯二甲酸(TA)为原料经非均相逐步缩聚反应制得聚亚苯基苯并二噁唑(PBO)。该反应可分为溶解控制(齐聚合)、反应动力学控制(预聚合)以及高分子链段扩散控制(后聚合)3个阶段。探讨了各阶段的反应过程,并对PBO预聚合反应动力学进行了研究。结果表明:其动力学符合不可逆二级反应机理,反应活化能为51.9 kJ/mol。     

聚苯并双噁唑酰亚胺的热分解动力学研究

采用二步法合成了以2,6-二(对-氨基苯)苯[1,2-d;5,4-d’]二噁唑和1,4-二(3,4-二苯氧基)苯四甲酸二酐(HQDPA)为单体的聚苯并双噁唑酰亚胺.该聚酰亚胺的预聚体聚酰胺酸的黏度为1.70 dL/g,经过热环化后能够生成浅黄色的聚酰亚胺薄膜.通过热重分析法研究了聚苯并双噁唑酰亚胺在N2气氛中的热降解机理.采用Flynn-Wall-Ozawa和Friedman法计算了聚苯并双噁唑酰亚胺热降解表观活化能,分别为356.36kJ/mol和370.54 kJ/mol,平均值为363.45 kJ/mol;反应级数为4.22,指前因子为6.44×1016s-1.采用Coast-Redfern法和Phadnis-Deshpande法研究了聚苯并双噁唑酰亚胺的热降解固相反应机理,认为该聚酰亚胺的热降解机理属于反曲线(A3)机理,是成核和增长模式(Avrami equation 2方程)控制的热降解反应,积分形式为g(X)=[-ln(1-X)]3.     

PBO的合成、表征及磷含量的测定

以4,6-二氨基-1,3-苯二酚盐酸盐和对苯二甲酸为原料,多聚磷酸为介质,缩聚得到聚对苯撑苯并二噁唑(PBO).通过实验得到最佳条件:聚合反应在减压及氮气保护下进行,聚合温度100℃~180℃,控制最终w(P2O5)=83%~84%.通过红外光谱、热重分析对PBO进行了表征.结果表明,合成的PBO具有优良的耐热性能.采用分光光度法测定聚合物中残余的磷含量,测定了最大吸收波长、绘制了磷标准曲线、考察了回流时间对聚合物中残余磷含量的影响.实验结果表明硫酸为溶剂、测定波长710 nm、当聚合物在水中回流30 h后,磷含量≤0.12%.     

2,6-二(对氨基苯)苯并[1,2-d;5,4-d']二噁唑的合成

以4,6-二氨基间苯二酚二磷酸盐和对氨基苯甲酸为原料,在多聚磷酸中,添加还原剂SnCl_2·2H_2O,经缩聚反应合成了有机二胺单体——2,6-二(对氨基苯)苯并[1,2-d;5,4-d']二噁唑(DIABO),其结构经~1H NMR和FT-IR确证。最佳反应条件为:1 0.01 mol,PPA中P_2O_5质量分数为84%,SnCl_2·2H_2O用量为8 wt%,在氮气保护下于200℃反应4 h,产率97%。TG研究结果表明:DIABO的起始分解温度为401.0℃。     

微波辅助铜合成2-(N,N-二甲氨基)苯并噁唑衍生物

建立了一种简单实用、经济高效的以取代2-碘芳胺和N,N-二甲基氨基硫代甲酰氯为原料,以碘化亚铜为催化剂,吡啶为溶剂,100 ℃条件下,串联合成2-(N,N-二甲氨基)苯并噁唑衍生物的微波催化体系,合成了一系列中等至良好产率的2-(N,N-二甲氨基)苯并噁唑衍生物,最高产率达90%。     

2,5-二取代-1,3,4-噻二唑衍生物的合成与表征

苯并噁唑啉酮和1,3,4-噻二唑衍生物具有多种生物活性,制备含有苯并噁唑啉酮结构的1,3,4-噻二唑衍生物非常有意义。本文以邻氨基苯酚和尿素为初始原料,经多步合成反应,制备了10个新的2-(芳甲酰氨基)-5-(2-苯并噁唑啉酮-3-甲基)-1,3,4-噻二唑化合物(7a～7j),并利用IR、1H NMR和元素分析对其结构进行了表征。     

5-硝基-6-羟基-2-(对甲氧羰基苯基)苯并噁唑的合成

研究了以关键中间体4-氨基-6-硝基间苯二酚盐酸盐（ANR·HCl）和对苯二甲酸单甲酯（MTA）为原料,分别经酰氯化、缩合、环合分步或原位合成AB型新单体前体--4-（5-硝基-6-羟基-2-苯并噁唑基）苯甲酸甲酯（MNB）的技术。 反应优化条件：在甲基异丁基酮溶剂中,n(ANR·HCl)∶n(MTA)=1.00∶1.03,115 ℃缩合反应2.5 h;m(ANR·HCl)∶m(PPA)=1.00∶3.25的多聚磷酸(PPA),120 ℃环合8.5 h;MNB收率75.68%（以ANR·HCl计）,HPLC测定ω(MNB)=96.32%。 产物结构经¹H NMR和IR确证。     

2-苯基苯并噁唑的光解反应

聚对苯撑苯并二噁唑(PBO)纤维对光较为敏感,在紫外光照射下会发生降解.本文研究了该纤维的单体2-苯基苯并噁唑(PO)的初级光化学反应机理.当PO分子吸收一个光子而跃迁到第一激发态后,克服25.59kJ·mol-1能垒而越过过渡态,此时噁唑环打开,且两个苯环形成大约90°的二面角而得到产物,该产物可进一步与空气中的水发生次级反应.计算结果表明在第一激发态上噁唑开环反应很容易,但在基态势能面并没有发现噁唑的开环路径.分子中的原子(AIM)的计算结果与上述分析过程相吻合.     

Synthesis and Characterization of Poly(p-phenylene benzobisoxazole)/Poly(pyridobisimidazole) Block Copolymers

Poly(p-phenylene benzobisoxazole)/poly(pyridobisimidazole) block copolymers (PBO-b-PIPD) were prepared by introducing poly(pyridobisimidazole) (PIPD) moieties into the main chains of poly(p-phenylene benzobisoxazole) (PBO) in order to enhance its photostability. PBO and copolymer fibers were directly prepared from the polymerization solutions by dry-jet wet-spinning. Chemical structures and molecular chains arrangement of the block copolymers were characterized by Fourier transform infrared (FTIR) spectroscopy, solid-state ¹³C-NMR and wide angle X-ray diffraction (WAXD). Thermal stability of the copolymers was investigated by thermogravimetric analysis (TGA) in nitrogen. Thin films of PBO and copolymers were cast from methanesulfonic acid (MSA) solutions. Both the films and fibers were exposed to UV light to determine their photostability. Changes in the chemical structures and surface morphologies of the films were characterized by FTIR spectra and scanning electronic microscopy (SEM), respectively. After UV light exposure, the retention of strength for copolymer fibers is improved compared to PBO fibers. The results revealed that copolymers suffered less photodegradation in comparison with homopolymer. The mechanism for the improved photostability of the copolymers was discussed.     

Novel conjugated polymer poly(benzobisoxazole-2,6-diylvinylene): synthesis and evidence of aggregate formation in methanesulfonic acid

A new conjugated polymer poly(benzobisoxazole-2,6-diylvinylene) (PBOV) has been synthesized as an analogue of poly(p-phenylene benzobisoxazole) (PBO). The comparison between PBOV and PBO has been carried out by Fourier transform infrared spectroscopy, thermogravimetric analysis, UV, and photoluminescence (PL) spectroscopy. The UV absorption peaks, PL excitation and emission wavelengths of PBOV have a significant red-shift due to the better electronic delocalization. Similar to PBO, it can be observed in the PL spectra of PBOV at various concentrations in methanesulfonic acid (MSA) that the intensity of emission was depressed and the highly structured emission spectra gradually changed to featureless, red-shifted, and broad spectra with increasing concentration. The change in emission spectra can be attributed to the existence of the interchain aggregates, although PBOV does not show highly ordered structure as PBO does.     

Porosity development in chars from thermal degradation of poly(p-phenylene benzobisoxazole)

The main objective of this work was to investigate porosity development in carbonaceous materials formed by thermal degradation of the high thermal stability polymer, poly(p-phenylene benzobisoxazole) (PBO). Two varieties of PBO, as-spun (AS) and high-modulus (HM) were studied. Chars obtained at various polymer decomposition temperatures (selected on the basis of thermogravimetric and differential thermal analysis results) were characterized by elemental analysis, infrared spectroscopy, X-ray diffraction and CO₂ adsorption at 273 K. The obtained adsorbents essentially contained narrow micropores, and maximum pore development took place at ca. 1000 K, when the polymer was not yet completely decomposed. At higher temperatures, there is a certain pore widening along with a displacement towards smaller pore sizes, and the pore volume significantly decreases.     

A study of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions

The stability of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions was studied. 2,6-Bis(4-tert-butylphenyl)benzo[1,2-d;4,5-d′]bisoxazole (1) dissolved in acetonitrile containing sulfuric acid and water at 80°C is stable. A suspension of 2,6-bis[4-(2-benzoxazoyl)phenyl]benzo[1,2-d;5,4-d′]bisoxazole (2) in 0.2 N H₂SO₄ or 0.2 N NaOH solution at 100°C for 21 days is stable. The intrinsic viscosity of a poly(p-phenylene)benzobisoxazole (PBO) fiber sample soaked in 0.2 N H₂SO₄, water with 1 wt % polyphosphoric acid (PPA), or 0.2 N NaOH remained the same. Under very severe hydrolytic conditions such as dissolution of compound 2 or PBO in PPA or methanesulfonic acid with residual water followed by coagulation in water, benzobisoxazole underwent bond cleavage to generate carboxylic acid and o-aminophenol functional groups. This is in contrast to an earlier hypothesis that the decrease in intrinsic viscosity under these conditions was due to chain association. Poly(p-phenylene)benzobisthiazole (PBT) also underwent bond cleavage under these very severe conditions, which are unlikely to be encountered in normal applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2637–2643, 1999     

UV accelerated aging and aging resistance of dihydroxy poly(p‐phenylene benzobisoxazole) fibers

By introducing binary hydroxyl groups into poly(p‐phenylene benzoxazole) (PBO) macromolecular chains, we synthesized dihydroxy poly(p‐phenylene benzobisoxazole) (DHPBO) polymers and then prepared DHPBO fibers by dry‐jet wet‐spinning. Comparative studies were performed between intrinsic PBO fibers and DHPBO fibers. The effects of hydroxyl polar groups on improving the UV aging resistance of PBO fibers were investigated. With the introduction of hydroxyl groups, substantial changes in the chemical structures and surface morphologies of DHPBO fibers were observed. As proved by tensile testing and intrinsic viscosity measurement, the UV resistance of DHPBO fibers is obviously improved compared to that of intrinsic PBO fibers. XRD results indicate that the UV aging of these fibers occurs mainly on the surfaces of fibers. Based on these results, the mechanism of UV aging of PBO fibers was discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

主链含羟基的芳杂环液晶共聚物聚对苯撑苯并二噁唑的 合成及性能研究

通过在聚合过程中添加少量2,5-二羟基对苯二甲酸(DHTA)部分替代对苯二甲酸(TPA)与4,6-二氨基间苯二酚(DAR)盐酸盐进行共聚, 合成了一系列大分子链上含有羟基基团的DHPBO共聚物, 并制得其初生纤维. 利用FTIR、接触角等分析手段对其化学结构和纤维表面性能进行了表征, 通过单丝拔出实验和SEM考察了DHPBO纤维与环氧树脂基体的界面剪切强度, 并采用轴向压缩弯曲实验和紫外光加速老化实验评价了羟基基团的引入对提高纤维压缩性能和抗紫外性能的影响. 结果表明, 羟基基团的引入使得DHPBO纤维的表面亲水性、与环氧树脂的界面剪切强度以及纤维的压缩性能和抗紫外性能都有了显著提高.     

In situ polymerization and characterization of graphene oxide‐co‐poly(phenylene benzobisoxazole) copolymer fibers derived from composite inner salts

A facile and efficient strategy for preparing well dispersed graphene oxide (GO)‐co‐Poly(phenylene benzobisoxazole) (PBO) copolymer fibers was carried out by direct in situ polycondensation of composite inner salts. The composite inner salts were achieved to improve the dispersivity, solubility, reactivity, and interfacial adhesion of GO in PBO polymer matrix. The structure and morphology of GO‐co‐PBO copolymer fibers have been characterized. It was demonstrated that GO were covalently incorporated with PBO molecular chains and dispersed considerably well in PBO fiber even the GO reach to 3 wt %. Meanwhile, the tensile modulus, tensile strength and thermal stability of GO‐co‐PBO copolymer fibers increased considerably with GO. The mechanism and theoretical calculation of GO enhanced PBO fiber were also discussed. The main reasons for the improvement on performance of PBO fiber should be attributed to good dispersion GO in PBO matrix and covalent bonding networks at the interface between GO and PBO molecular chains. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

聚芴基苯并唑类共聚物的合成和光物理性能

通过溶液缩聚法合成了一系列不同组分的无规共聚物--聚对苯撑苯并二噁唑-co-聚(9,9-二辛基芴苯并二噁唑)(PBO-co-PBOF).利用X射线衍射、紫外-可见光吸收光谱、光致荧光光谱研究了不同组分和结构变化对聚合物形态和光物理性能的影响.结果表明:聚合物主链上辛基芴基团的引入使聚合物结构从晶态转变为非晶态.共聚物分...     

Confirmation of the crystal structure of poly(p‐phenylene benzobisoxazole) by the X‐ray structure analysis of model compounds and the energy calculation

To check the previously proposed crystal structure of poly(p‐phenylene benzobisoxazole) [PBO], we performed an X‐ray structure analysis for single crystals of low molecular weight model compounds with the following chemical formulas: Both of these two model compounds show essentially the same molecular and subcell structures as those of PBO: the molecular chains take an almost perfect planar conformation and are packed together with a relative height between the adjacent chains of about 3 Å along the chain axis, although for the polymer the chains are shifted by the same value but in a disordered mode with respect to the direction of the shift (upward or downward), different from the regular packing in model compounds. These structural features are reproduced well with energy calculations. Structural ordering in PBO fibers caused by heat treatment at high temperatures, as clarified by X‐ray diffraction measurement, are interpreted on the basis of the energy calculations. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1296–1311, 2001