ABA两亲性嵌段共聚物在双选择性溶剂中自组装行为的Monte Carlo模拟

采用Monte Carlo模拟方法研究了ABA两亲性三嵌段共聚物在两种选择性溶剂中的自组装行为.模拟结果表明,在保证溶剂总浓度一定的情况下,改变两种选择性溶剂的体积比对于ABA两亲性嵌段共聚物自组装所形成的胶束形貌结构有很大影响.随着双选择性溶剂体积比的改变,体系中胶束形貌结构将会发生由囊泡到层状,再到环状、棒状直至球...     

多分散性对两亲性两嵌段共聚物在选择性溶剂中自组装行为影响的Monte Carlo模拟

采用Monte Carlo模拟方法研究了多分散性AB两亲性两嵌段共聚物在选择性溶剂中的自组装行为.模拟结果表明,嵌段共聚物的多分散性对体系在选择性溶剂中自组装所形成的胶束形貌结构有很大影响.当AB两嵌段共聚物的多分散系数由1.0增加至1.4时,体系中自组装所形成的胶束将会发生由囊泡到片层直至球状的一系列形态转变.通过统...     

环形两嵌段共聚物在软受限条件下自组装行为的Monte Carlo模拟

本文采用Monte Carlo模拟方法考察了环形两嵌段共聚物在软受限条件下的自组装行为。模拟结果表明通过调节嵌段比例,AB环形两嵌段共聚物能够在软受限条件下形成A、B呈交替排列层状相的蛹状粒子,A嵌段呈条带状环绕B相区的椭球粒子以及A嵌段呈块状六角堆积排布的补丁状粒子等多种有序结构。通过考察嵌段间的不相容性和嵌段的疏水性对体系聚集体形貌结构和自组装过程的影响,模拟结果给出了补丁状粒子这一具有特殊有序结构粒子的形成条件,即嵌段的疏水性较弱或不同种嵌段间的不相容性较强的体系中,少组分嵌段A易于在多组分嵌段B形成的连续相中形成具有块状微相结构的补丁状粒子。上述模拟结果能够为人们对环形两嵌段共聚物在纳米材料领域的潜在应用提供理论依据和新思路,使人们对环形两嵌段共聚物在三维软受限中的自组装行为有更进一步的了解。     

环形对称两嵌段共聚物在薄膜中自组装行为的计算机模拟

采用Monte Carlo模拟方法考察了AB环形对称两嵌段共聚物受限在薄膜中的自组装行为。模拟结果表明,AB环形对称两嵌段共聚物在薄膜中自组装形成的层状结构的取向依赖于薄膜表面的选择性或膜厚。当薄膜表面无选择性或具有强选择性时,体系中层状结构的取向分别为垂直和平行于薄膜表面;当薄膜表面选择性较弱时,随着膜厚的增加层状结构的取向会发生由垂直向平行于薄膜表面的转变。这些模拟结果与文献报道中线形体系十分一致。然而值得注意的是,当薄膜表面的选择性适中时,环形体系中形成了一种在线形体系中未被观察到的具有波浪形层状结构的新颖有序结构。通过对该结构相互作用焓密度与链构象的分析发现,该结构是一种稳定态结构。此外,通过对比相同参数下环形体系与线形体系的层状结构发现,环形体系层状结构的特征尺寸明显小于线形体系。上述模拟结果表明相对于与其分子量相同的线形嵌段共聚物,环形嵌段共聚物由于其特殊的几何结构能够形成新颖的或具有更小特征尺寸的微相分离结构,而控制特征尺寸,尤其是获得尽可能小的特征尺寸,对于制备具有更小纳米结构和更高集成度的微电子器件具有重要意义。     

嵌段共聚物在选择性溶剂中自组装过程的计算机模拟

嵌段共聚物由于各嵌段性质不同,在选择性溶剂中能够自发地组装形成众多形态结构各异的纳米结构,如纳米级的球状、棒状、环状、片层状、囊泡及复合胶束等。这些胶束结构在药物传输、催化、电子信息等众多领域都有潜在的应用价值。通过计算机模拟可以在线监控嵌段共聚物的组装过程、揭示其组装机理,明确各种因素对组装结构的影响规律,为实验研究提供思路和理论支持,因此越来越受到人们的广泛关注。本文主要综述了通过计算机模拟对嵌段共聚物在选择性溶剂中自组装研究的一些最新进展,详细讨论了影响嵌段共聚物自组装过程和胶束形貌的各种因素,并对这个领域未来的发展进行了展望。     

在平行板受限条件下AB两嵌段共聚物/纳米粒子复合物自组装行为的Monte Carlo模拟

采用Monte Carlo模拟方法研究了在平行板受限条件下A_(15)B_5非对称两嵌段共聚物与纳米粒子复合物的自组装行为,其中平行板对多组分嵌段A具有吸引相互作用.模拟结果表明,纳米粒子在两嵌段共聚物/纳米粒子复合物中的体积分数、嵌段共聚物不同嵌段与纳米粒子间的相互作用均对体系在平行板受限条件下的形貌结构及纳米粒子在体系中的分布有重要影响.当平行板间距一定时,未添加纳米粒子的A_(15)B_5非对称两嵌段共聚物中的A嵌段被吸附在平行板上形成层状相,而B嵌段则在平行板中形成六角堆积穿孔层状结构.加入与A嵌段不相容而与B嵌段相容的纳米粒子后,增加了纳米粒子与B嵌段的相容性,有利于保持B嵌段所形成的穿孔结构及孔洞尺寸,同时纳米粒子能够均匀地分散在B相区中.当引入的纳米粒子与A和B两嵌段均不相容时,降低纳米粒子与嵌段共聚物的不相容性同样有利于维持体系的穿孔结构.当纳米粒子与AB两嵌段共聚物间的排斥作用微弱时,即使含量较高,纳米粒子也不聚集,并且均匀分布在A相区与B相区的交界处.     

两亲性含糖三嵌段共聚物的合成与自组装研究

以二(2-溴异丁酸)4,4′-联苯酯(BiBBP)为引发剂,采用顺序加料的方法,用原子转移自由基聚合法(ATRP)合成了一系列窄分子量分布的甲基丙烯酸甲酯(MMA)和6-O-甲基丙烯酰基-1,2;3,4-双-O-亚异丙基-α-D-吡喃半乳糖苷(MAIPGal)的三嵌段共聚物.用GPC和1H-NMR表征了聚合物的相对分子量和链段组成.结果表明,通过改变投料顺序可以合成ABA和BAB型2种三嵌段共聚物,改变投料比和控制单体的转化率可以调控聚合物的链段组成.聚合物脱保护后得到两亲性含糖共聚物.用TEM考察了聚合物在水溶液中的自组装行为,表明具有不同链段组成的共聚物可以形成不同形态的聚集体,含糖段组成高的聚合物易于形成大尺寸的胶团,含糖段组成低的聚合物易于形成结构清晰的囊泡、胶束,其中,含糖段在两边的BAB型共聚物易于形成囊泡,含糖段在中央的ABA型共聚物易于形成胶束.     

嵌段序列对聚合物囊泡形成过程影响的Monte Carlo模拟

采用Monte Carlo模拟方法研究了具有相同链长和组分比的不同嵌段序列的AB两嵌段共聚物与ABA三嵌段共聚物在选择性溶剂中形成囊泡的动力学过程. 模拟结果表明, AB两嵌段共聚物囊泡的形成与ABA三嵌段共聚物囊泡的形成的动力学过程不同. 在慢速退火条件下, ABA三嵌段共聚物囊泡是通过亲水链段向胶束的表面和中心扩散而形成的, 而AB两嵌段共聚物囊泡则由片层弯曲闭合而形成. 相对而言, 退火速度对AB两嵌段共聚物囊泡形成的动力学过程没有显著影响, 其改变仅影响亲水链段与疏水链段发生相分离的难易程度. 当退火速度较快时, 亲水链段和疏水链段发生相分离的速度较快且相分离发生在囊泡形成之前; 而当退火速度较慢时亲水链段和疏水链段之间的相分离在囊泡形成之后仍在进行.     

双亲嵌段共聚物自组装特性的计算机模拟

双亲嵌段共聚物在不同体系下会自组装成各种形貌的超分子聚集体,是目前人们研究的热点,并在工业领域得到了广泛应用。计算机模拟是研究其自组装特性机理及聚集体结构、动态性质的有效工具。本文对近年来嵌段共聚物自组装特性的热力学模型和动力学模拟的研究进展进行了综述,分析了其中存在的问题并进行了展望。     

The Morphology of Symmetric Triblock Copolymer Melts Confined in a Slit: A Monte Carlo Simulation

Monte Carlo simulations based on a modified bond‐fluctuation and vacancy‐diffusion algorithm on a simple cubic lattice were employed to examine the morphology of thin films of the symmetric A_mB_2nA_m triblock copolymer confined between two hard homogeneous parallel walls. The walls preferred either segment A or segment B. Parallel lamellae, parallel cylinders and perpendicular cylinders morphologies, dependent on the composition, film thickness and interaction energies, were identified in these simulations, in agreement with the experimental observations of several researchers.     

Monte Carlo Simulation of ABA Triblock Copolymer Melts Confined in a Cylindrical Nanotube

Monte Carlo simulations were used to identify the microphase morphologies of ABA triblock copolymer melts confined in a cylindrical nanotube. The influences of the volume fraction of mid‐block B (f_B), the radius of nanotube (R) and the asymmetry of ABA triblock copolymer chain were discussed in detail. When f_B varies, a series of double‐continuous, three‐layer concentric cylinder barrel, porous net, double helixes and the new multiplex structures were observed under different conditions. In addition, the stacked disk, catenoid‐cylinder and multi‐layer concentric cylinder barrel structures occur in turns at changing R. The relation between circular lamellae period L and layer number N_layer of concentric cylinder barrel with the increase of R was investigated to further explain the put‐off phenomenon of microphase transition of the multi‐layer concentric cylinder barrel structures. As for the increase of the asymmetry of ABA triblock copolymer chain, it was concluded that the short A_I segments tend to site at the interface between rich A and B circular lamellae.

     

两亲性接枝共聚物在选择性溶剂中自组装行为的模拟研究

利用粗粒化分子动力学(CGMD)方法研究了两亲性接枝共聚物在不同选择性溶剂中的自组装行为. 分析了主链刚性及链长对自组装结构的影响. 研究结果表明, 当溶剂对主链为良溶剂而对支链为不良溶剂时, 两亲性接枝共聚物随主链刚性的增加自组装形成花状胶束、 花桥状胶束及桥状胶束, 并且组分比例对自组装结构影响很大; 随着链长的增加, 柔性链出现单花状胶束到多花状胶束的转化. 当溶剂对主链为不良溶剂而对支链为良溶剂时, 可得到近球形或椭球形核壳状胶束及束状结构; 不同链长时, 柔性接枝共聚物链均只能得到近球形的单核壳状胶束.     

Monte Carlo Simulations of the Morphologies and Conformations of Triblock Copolymer Thin Films

Summary: The morphologies and conformations of triblock copolymer (ABA and ABC) thin films confined between two identical walls were investigated by Monte Carlo simulation using bond length fluctuation and cavity diffusion algorithm on cubic lattice. Effects of the wall‐block interactions, copolymer chain composition and film thickness on morphologies, as well as on the fraction of chain “bridge” conformation f_bridge are presented in detail. In ABA thin film, column, parallel, perforated and perpendicular lamellas were discriminated, furthermore, the transition of morphology and the variation of f_bridge of ABA film along with the increase of thickness were revealed. In ABC thin film, lamella especially perpendicular lamella morphologies are predominant in varying the wall‐block interactions and the thickness. The results are consistent with some theoretical predictions such as DDFT and simulations reported in literature.

Isodensity profile of A₅B₅A₅ thin film.     

Studies on the Adsorption of Asymmetrical Triblock Copolymers by Scheutjens-Fleer Theory and Monte Carlo Simulation

The adsorption of asymmetrical triblock copolymers from a non-selective solvent on solid surface has been studied by using Scheutjens-Fleer mean-field theory and Monte Carlo simulation method on lattice model. The main aim of this paper is to provide detailed computer simulation data, taking A8-kB20Ak as a key example, to study the influence of the structure of copolymer on adsorption behavior and make a comparison between MC and SF results. The simulated results show that the size distribution of various configurations and density-profile are dependent on molecular structure and adsorption energy. The molecular structure will lead to diversity of adsorption behavior. This discrepancy between different structures would be enlarged for the surface coverage and adsorption amount with increasing of the adsorption energy. The surface coverage and the adsorption amount as well as the bound fraction will become larger as symmetry of the molecular structure becomes gradually worse. The adsorption layer becomes thicker with increasing of symmetry of the molecule when adsorption energy is smaller but it becomes thinner when adsorption energy is higher. It is shown that SF theory can reproduce the adsorption behavior of asymmetrical triblock copolymers. However, systematic discrepancy between the theory and simulation still exists.The approximations inherited in the mean-filed theory such as random mixing and the allowance of direct back folding may be responsible for those deviations.     

ABC三嵌段共聚物胶束从多间隔结构到多核结构转变的Monte Carlo模拟

采用Monte Carlo模拟方法研究了疏水-亲水-疏水(H-P-H)型ABC三嵌段共聚物在B嵌段的选择性溶剂中的自组装行为. 模拟结果表明, 通过调节A嵌段和C嵌段的疏水性和二者之间的不相容性, 体系中可以形成多种形貌各异的胶束. 根据胶束中疏水核结构的特点, 这些胶束大体上可以被分为多核型胶束和多间隔型胶束两种类型. 通过增强疏水嵌段的疏水性或降低A嵌段和C嵌段间的不相容性, H-P-H型ABC三嵌段共聚物胶束能够发生从多核型胶束向多间隔型胶束的转变. 进一步分析胶束中聚合物的链构象等微观结构信息发现, A嵌段和C嵌段间的排斥作用和疏水作用之间存在竞争关系, 而这种竞争关系是影响体系中形成多核型胶束还是多间隔型胶束的决定性因素.