Microwave Synthesis of Copolymers Based on Itaconic Acid Moiety and Their Utility for Scavenging of Copper (II) and Lead (II)

We report here the preparation of the two copolymers, itaconic acid-methyl methacrylate and itaconic acid-acrylamide, in different ratios using microwave irradiation in the presence of azobisisobutyronitrile (AIBN) as initiator and 2-butanone as a solvent. All the prepared copolymers were characterized by different techniques; FT-IR, thermal analysis and elemental microanalysis. The thermal stability property of the prepared copolymers correlated with the changing of the itaconic acid ratio, as the ratio of itaconic acid increased, the crystallinity of the copolymer decreases. The itaconic acid-based copolymers also showed a good scavenging behavior in alkaline media for Cu (II) and Pb (II). The chelation behavior of both Cu (II) and Pb (II) complexes were checked using FT-IR, thermogravimetric analysis (TGA), and differential scanning calorimetery (DSC).     

Evaluation of molecularly imprinted membranes based on different acrylic copolymers

Polyacrylonitrile and its copolymers with different functional monomers (itaconic acid, acrylic acid and acrylamide) were synthesized via water-phase precipitation polymerization in order to prepare molecularly imprinted polymer (MIP) membranes with recognition properties for the flavonoid naringin (NR). Membranes were prepared by phase inversion technique using dimethylformamide (DMF) as the solvent and adding naringin as template molecule to the casting solution. For comparison, membranes without template (blank) were prepared and tested. All MIP membranes showed high specific binding capacity; among them, the membrane prepared with the copolymer containing acrylamide as functional group, showed the highest binding capacity. Blank membranes only showed non-specific binding. The bound template was totally recovered and regenerated membranes maintained their initial binding capacity after reuse.     

Radiation synthesis of superabsorbent poly(acrylic acid)–carrageenan hydrogels

A series of superabsorbent hydrogels were prepared from carrageenan and partially neutralized acrylic acid by gamma irradiation at room temperature. The gel fraction, swelling kinetics and the equilibrium degree of swelling (EDS) of the hydrogels were studied. It was found that the incorporation of even 1% carrageenan (sodium salt) increases the EDS of the hydrogels from 320 to 800 g/g. Thermal analysis were carried out to determine the amount of free water and bound water in the hydrogels. Under optimum conditions, poly(acrylic acid)–carrageenan hydrogels with high gel fraction (80%) and very high EDS (800 g/g) were prepared gamma radiolytically from aqueous solution containing 15% partially neutralized acrylic acid and 1–5% carrageenan. The hydrogels were also found to be sensitive to the pH and the ionic strength of the medium.     

A spectroscopic investigation of complexes of divalent metal ions with maleic acid copolymers

The absorption spectra of complexes of copper(II), nickel(II), and barium(II) with three partially neutralized maleic acid copolymers in aqueous solution have been investigated in the range 195–720 nm. Copper ions are always very strongly bound, giving electron transfer complexes. Relevant spectral features are found to depend on the number of methyl groups in the polymer backbone, and in particular, for each given polymer, on the amount of available ligand negative charge per divalent counterion. The spectra of the complexes of nickel(II) and barium(II) suggest that they interact with the polycarboxylates much more weakly than copper(II).     

Unusual deactivation in the asymmetric hydrogenation of itaconic acid

The formation of unusual Rh(III) substrate complexes from [Rh(DIPAMP)(MeOH)₂]BF₄ and itaconic acid has been detected which leads to the deactivation of the catalyst. The influence of different parameters on the formation of such complexes, namely substrate concentration, reaction time, temperature, acidic and basic additives, was investigated with different NMR methods. Two different Rh(III) substrate complexes are formed whose ratio is strongly dependent on substrate concentration and reaction time. The pH value of the solution shows a strong influence on the chemical shifts of the ³¹P NMR signals of such complexes. A catalyst-mediated esterification of itaconic acid in methanol was detected. Extended investigations provide detailed ¹H, ¹³C and ³¹P NMR data for the Rh(III) complexes and information about their stability in solution.     

Expanding the Scope of Atropisomeric Monodentate P‐Donor Ligands in Asymmetric Catalysis: Hydrogen‐Transfer Reduction of α,β‐Unsaturated Acid Derivatives by Rhodium/Ph‐binepine Catalysts

A range of α,β‐unsaturated acids and esters have been selectively reduced to the corresponding saturated acid derivatives by hydrogen transfer. As the reducing agent, formic acid was used in the presence of Rh^I complexes formed with the powerful chiral ligand Ph‐binepine ( 1 ), an axially chiral binaphthalene‐type monodentate P‐donor ligand. Very high stereoselectivities (up to 97% ee) were obtained in the case of itaconic acid ( 2a ).     

Adsorption of bovine serum albumin to acrylamide–itaconic acid hydrogels

In this study, acrylamide–itaconic acid hydrogels containing different amounts of itaconic acid prepared by irradiating with γ radiation are discussed. They have been used in experiments of swelling, diffusion and bovine serum albumin (BSA) adsorption. Maximum and minimum swellings were observed with water (1520%) and BSA (890%), respectively. Diffusion of water, NaCl and BSA within hydrogels were found to be non-Fickian in character. In the experiments of BSA adsorption, type III adsorption was found. The hydrogel prepared with 60 mg itaconic acid and irradiated at 2.00 kGy was found to be the best adsorption system for BSA. The adsorption capacity of acrylamide–itaconic acid hydrogel was found to exceed that of acrylamide hydrogel by more than 80–100%.     

Asymmetric hydrogenation catalyzed by rhodium complexes of 2,3-bis(dimenthylphosphino)maleic anhydride and 2,3-bis(dimenthylphosphino)-N-phenylmaleimide

2,3-Bis(dimenthylphosphino)maleic anhydride and the phenylimide derivative have been prepared from 2,3-dichloromaleic anhydride and 2,3-dichloro-N-phenylmaleimide, respectively, and dimenthyl(trimethylsilyl)phosphine. These compounds have been used as ligands for Rh complexes and have been tested in the asymmetric hydrogenation of α-acetamidocinnamic acid, methyl-α-acetamidocinnamate and itaconic acid. Optical yields of up to approximately 70% were obtained with α-acetamidocinnamic acid.     

Metal ion-promoted hydrolyses of ligand esters in the presence of polycarboxylates

Copper(II), nickel(II), cobalt(II), and zinc(II) accelerated the carboxylate-catalyzed hydrolyses of 2,4-dinitrophenyl isonicotinate (DNPI) and 2,4-dinitrophenyl picolinate (DNPP). The rate enhancement effect of the metal ions in the partially neutralized poly(methacrylic acid)- or poly(acrylic acid)-catalyzed hydrolysis of DNPI was greater than that in the monomeric acetate ion-catalyzed hydrolysis of this ester. This feature of the reactions was explained by the formation of a ternary complex composed of the polymer, the metal ion, and the substrate, in which the metal ion serves as a template for the nucleophilic reaction between the carboxylate groups along the polymer chain and the coordinated substrate. In DNPP the metal ion effect on the polycarboxylate-catalyzed hydrolysis was smaller than that on the acetate ion-catalyzed hydrolysis. This was interpreted as the result of differences in the structure of the complex.     

Polymerization Behaviour of Organically Modified Titanium Alkoxides in Solution

Modified titanium alkoxides with polymerizable organic ligands allow the synthesis of copolymers consisting of hybrid organic/inorganic networks. In this work titanium based-precursors were characterized in relation to the polymerization behaviour of the organic matrix. Alkoxide sols were prepared by reaction of methacrylic acid, itaconic acid anhydride, isoeugenol, p-vinylbezoic acid, p-vinylphenylacetic acid, and acetoxyacetomethacrylate with titanium tetraisopropoxide and titanium tetraethoxide. Polymerization reactions were carried out in solution using UV-irradiation and a redox-system of dibenzoylperoxide/N, N-dimethyl-p-toluidine as radical initiators. Especially for chemical activation some complexes showed high reactivity similar to silica-based methacrylates. The systems investigated are capable of acting as adhesive promoters between metal and polymer in dental applications.     

Binary and Ternary Copper(II) Complexes with NIPAAm/IA Copolymers and Aminoacids: Interpretation of UV‐Visible Spectra and Cyclic Voltammograms

The complex formations of homopolymers and copolymers of poly(N‐isopropyl acrylamide) (PNIPAAm), polyacrylamide (PAAm) and poly(itaconic acid) (PIA) with Cu(II) ions in aqueous solutions were studied by using UV‐visible spectra in the region of 200–1100 nm and cyclic voltammograms between ?0.800 V and 0.600 V. According to the optical and electrochemical spectra of the polymer‐ and copolymer‐Cu(II) complexes and their ternary complexes with alanine, i.e., absorptions and the shifts in the wavelength of the maximum absorptions, currents and potentials of the peaks in the pH range of 3–12, the intensities of anodic and cathodic peak currents of polymers containing IA groups decrease with increasing pH and they show maximum absorptions at lower wavelengths than do the homopolymers used in this work. The peak point of the visible band shifts from 800 to 650 nm, with increasing pH, while the intensity of the third anodic peak observed after pH=4 increases in the case of both Ala‐Cu(II) and its ternary solution with P(NIPAAm‐co‐IA, 9.8 mol%). Both the pH‐dependent shifts of maximum absorptions and the appearence of the third anodic peaks as the pH raised were interpreted as a presence of tetracoordinated Cu(II) complexes in the solution and on the electrode surface, involving combined carboxyl, amide and amine interaction.     

Effect of supercritical CO2 in modified polystyrene 3D latex arrays

The effect of supercritical CO(2) (scCO(2)) in 3D latex arrays formed by monodispersed particles of polystyrene (PS), PS cross-linked with divinylbenzene (PS-DVB), and PS block copolymers with 2-hydroxyethyl methacrylate (PS-HEMA), methacrylic acid (PS-MA), acrylic acid (PS-AA), itaconic acid (PS-IA), and a mixture of methacrylic and itaconic acid (PS-IA-MA) has been studied. Sorption of CO(2) into the polymer particles leads to a decrease in the glass transition temperature of the polymer and the swelling of the particles and induces their coalescence. 3D-latex arrays of the former compositions were treated in scCO(2) at temperatures and pressures ranging from 40 to 80 degrees C and from 85 to 197 bar, respectively. The effect of CO(2) on the polymeric template was assessed by scanning electron microscopy and N(2) adsorption analysis. Bare PS and PS-HEMA particles sintered readily in scCO(2) at 40 degrees C and 85 bar. On the other hand, particles containing carboxylic acid groups on their surface (PS-MA, PS-AA, PS-IA, and PS-IA-MA) were, at the same temperature and pressure, more resistant to the CO(2) treatment. For a given polymer composition, the sorption of CO(2) inside the polymer particles, the swelling, and the degree of coalescence depend on the pressure, temperature, and time of the CO(2) treatment. Analysis of the pore size distributions from the N(2) adsorption data has allowed us to quantify the degree of coalescence of the particles in the matrix. By careful control of the experimental variables, the coalescence of the 3D latex array could be finely tuned using CO(2).     

Solubility of Itaconic Acid in Aqueous Ethanol Mixtures from 278.15 K to 333.15 K

Data on corresponding solid?Cliquid equilibrium of itaconic acid in binary aqueous ethanol solutions are essential for industrial design and further theoretical studies. Using the analytical stirred-flask method, the solubility of itaconic acid in pure water solvent and mixed solvents were measured over the temperature range from 278.15 to 333.15 K at atmospheric pressure. The effect of solvent composition and temperature on the solubility is discussed. The solubility data were correlated with the Combined Nearly Ideal Binary Solvent/Redlich (CNIBS/R-K) model. The solubility measured in this study can be used for the itaconic acid purification or optical resolution by the preferential crystallization procedure.     

Synthesis of chiral hydroxyl phospholanes from D-mannitol and their use in asymmetric catalytic reactions

Chiral hydroxyl monophosphane 3 [(2S,3S,4S,5S)-3,4-dihydroxy-2, 5-dimethyl-1-phenylphospholane] and bisphospholanes 5a [1,2-bis[(2S, 3S,4S,5S)-3,4-dihydroxy-2,5-dimethylphospholanyl]benzene] and 5b [1, 2-bis[(2S,3S,4S,5S)-2,5-diethyl-3,4-dihydroxyphospholanyl]benzene] were synthesized from readily available D-mannitol in high yields. Strategies for protection and deprotection of OH-groups in the presence of phosphines have been explored. Rate acceleration in the Baylis-Hillman reaction was observed when a hydroxyl phosphine was used as the catalyst. Rhodium complexes with chiral bisphospholanes are highly enantioselective catalysts for the asymmetric hydrogenation of various kinds of functionalized olefins such as dehydroamino acid derivatives, itaconic acid derivatives, and enamides. An interesting feature of the hydroxyl phospholane system is that hydrogenation of some substrates can be carried out in water with >99% ee and 100% conversion (e.g., itaconic acid).     

Local acid environment in poly(ethylene‐ran‐methacrylic acid) ionomers

The local environment of unneutralized carboxylic acid groups in poly(ethylene‐ran‐methacrylic acid) (E/MAA) ionomers neutralized with monovalent (Li and Na) and divalent (Ca and Zn) ions has been investigated with Fourier transform infrared spectroscopy. These unneutralized acid groups interact with one another to form acid dimers, and they associate with existing neutralized complexes. At room temperature, no free acids can be detected for any system, not even for pure E/MAA. With the acid dimer peak (1700 cm^?1) and a known unneutralized acid concentration, the concentration of acids associated with a neutralized complex can be determined. This concentration of associated acids increases with increasing neutralization, reaches a maximum below 50% neutralization, and then decreases toward zero near 80% neutralization. This behavior is perhaps due to the increased driving force for aggregation of the neutralization acids. Although Li, Na, and Ca contain similar concentrations of associated acids over the range of neutralizations, the Zn system contains far fewer associated acids (i.e., more acid dimers) at any particular neutralization level. These results are confirmed by an analysis of the absorbance in the neutralized region (1650–1500 cm^?1). © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2833–2841, 2002     

Acid soap and phase behavior of stearic acid and triethanolamine stearate

Crystals of partially neutralized stearic acid with triethanolamine (TEA) were prepared by mixing these two materials above 80 degrees C and then cooling. The crystalline composition and the structure and melting behavior of the resultant products were characterized with small-angle and wide-angle X-ray diffraction, thermal analysis, microscopy, and infrared spectroscopy. It was discovered that an acid-soap complex of 2:1 fixed stoichiometric ratio exists between stearic acid and TEA stearate. A binary phase diagram of stearic acid and TEA soap is built based on the experimental results; this is the first published record of a binary phase diagram for amine-based soap. Its behavior is significantly different from that of binary systems of fatty acid and alkali soap.     

Polyelectrolyte complexes. I. Synthesis and characterization of some insoluble polyanion-polycation complexes

The synthesis of some water-insoluble synthetic polyelectrolyte complexes formed between a weak polyanion and a strong polycation was followed. Sodium salts of poly(acrylic acid) and of some copolymers of acrylic acid with itaconic acid or maleic acid were used as anionic polymers. Cationic polyelectrolytes with quaternary ammonium salt groups in the main chain were used as strong polycations. The cationic polymers were different as concerns both the content of quaternary nitrogen atoms and the degree of branching. The complex formation was followed by the variation of the conductivity and of the specific viscosity of the reaction medium as well as by the turbidimetric titration versus the unit molar ratio polyanion/polycation. The deviation of the endpoint from stoichiometry was influenced mainly by the structure of the complementary polymers and by their molecular weights. The greater the structural differences, the higher the endpoint deviation from stoichiometry. Only insoluble polyelectrolyte complexes (PEC) were obtained in all the polyanion/polycation systems taken into account. The PECs were separated and characterized by elemental and spectral analyses as compared with the complementary polymers. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of itaconic‐based epoxy resins

A trifunctional epoxy resin from itaconic acid (TEIA) was synthesized from a renewable resource‐based itaconic acid by allylation of itaconic acid to form diallyl itaconate by using m‐chloroperoxybenzoic acid as oxidizing agents followed by epoxidation of allylic C═C bond of diallyl itaconate methylhexahydropthalic anhydride as curing agent in the presence of 2‐methyl imidazole as a catalyst. The chemical structure of the synthesized resins was confirmed by Fourier transform infrared and nuclear magnetic resonance (¹H‐NMR and ¹³C‐NMR) spectroscopy analysis. The mechanical, thermal, and rheological performances of the TEIA were also investigated and compared with diglycidyl ether of bisphenol A and a plant‐based epoxidized soybean oil bioresin cured with the same curing agent. The higher epoxy value of 1.02, lower viscosity (0.96 Pa s at 25°C), higher mechanical, and higher curing reactivity toward methylhexahydropthalic anhydride of TEIA as compared with epoxidized soybean oil and comparable with diglycidyl ether of bisphenol A demonstrated significant evidence to design and develop a novel bio‐based epoxy resin with high performance to substitute the petroleum‐based epoxy resin.     

衣康酸酯交联的两性网笼树脂的合成与性能

以大孔强碱树脂为笼树脂,衣康酸酯为交联剂,衣康酸酯和丙烯酸在笼树脂中交联聚合制得两性网笼树脂,考察了衣康酸单酯用量,反应时间,反应温度对树脂吸附量的影响,找出了较好的合成条件.在该条件下两性网笼树脂具有良好的机械性能.     

Preparation and evaluation of a monolithic molecularly imprinted polymer for the chiral separation of neurotransmitters and their analogues by capillary electrochromatography

A monolithic molecularly imprinted polymer (MIP) column was prepared as the stationary phase for the capillary electrochromatographic (CEC) separation of a group of structurally related compounds including dopamine (DA), (±)-epinephrine (EP), (-)-isoproterenol (ISO), (±)-norepinephrine (NE), (±)-octopamine (OCT), and (±)-synephrine (SYN). Here, (-)-NE was used as the template. Either methacrylic acid (MAA) or itaconic acid (IA) together with a mixture of ethylene glycol dimethacrylate (EDMA) and α,α'-azobis(isobutyronitrile) (AIBN) in N,N-dimethylformamide (DMF) was introduced into a pre-treated, silanised, fused-silica capillary by a thermal non-covalent polymerisation procedure. Optimised conditions for the polymerisation reaction were assessed by the separation efficiency of the template. Both the template/monomer/cross linker molar ratio and the compositions of the functional monomer, cross-linker, and porogen affected polymerisation. The optimum in situ polymerisation reaction was performed at 65 °C for 17 min. By varying CEC parameters like eluent composition and pH, we observed that the addition of SDS to the eluent clearly improved the CEC separations. With a mobile phase of citrate buffer (10 mM, pH 3)/SDS (40 mM)/acetonitrile (2/2/1, v/v/v) solution and an applied voltage of 10 kV, the six related structures of the template and their enantiomeric mixtures were satisfactorily separated at 30 °C.