Evaluation of the properties of some nitrile–butadiene rubber/polychloroprene mixes and vulcanizates

Nitrile–butadiene rubber (NBR) has been blended with polychloroprene (CR) in a weight ratio of 1:1. The vulcanizing systems in the blend formulations were varied to obtain non crosslinked CR embedded in vulcanized NBR and non crosslinked NBR embedded in vulcanized CR. The effects of these two different phases on the rheological and mechanical characteristics were evaluated. In addition, the dynamic compliance of the blends was measured over wide ranges of frequency and temperature. It has been found that the mechanical and rheological properties of the vulcanized blends depend on the type of vulcanizing system, its concentration and the presence of reinforcing filler. The mechanical properties of the blend containing N‐cyclohexyl‐2‐benzthiazyl sulphenamide/S as vulcanizing system suitable for NBR are higher than those of the blend containing non‐sulfur vulcanizing system (Zno/Mgo and ethylene thiourea) suitable for CR. Both types of rubber (CR and NBR) in the blend are incompatible as two glass transition temperatures have been observed. Copyright © 2000 John Wiley & Sons, Ltd.     

Dynamic mechanical behavior of acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) blends

The dynamic mechanical behavior of uncrosslinked (thermoplastic) and crosslinked (thermosetting) acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) (NBR/EVA) blends was studied with reference to the effect of blend ratio, crosslinking systems, frequency, and temperature. Different crosslinked systems were prepared using peroxide (DCP), sulfur, and mixed crosslink systems. The glass‐transition behavior of the blends was affected by the blend ratio, the nature of crosslinking, and frequency. sThe damping properties of the blends increased with NBR content. The variations in tan δ_max were in accordance with morphology changes in the blends. From tan δ values of peroxide‐cured NBR, EVA, and blends the crosslinking effect of DCP was more predominant in NBR. The morphology of the uncrosslinked blends was examined using scanning electron and optical microscopes. Cocontinuous morphology was observed between 40 and 60 wt % of NBR. The particle size distribution curve of the blends was also drawn. The Arrhenius relationship was used to calculate the activation energy for the glass transition of the blends, and it decreased with an increase in the NBR content. Various theoretical models were used to predict the modulus of the blends. From wide‐angle X‐ray scattering studies, the degree of crystallinity of the blends decreased with an increasing NBR content. The thermal behavior of the uncrosslinked and crosslinked systems of NBR/EVA blends was analyzed using a differential scanning calorimeter. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1556–1570, 2002     

Evaluation of carbon black distribution in different phases of compatible blend of EVA/NBR through electrical,mechanical and morphological test

The paper reveals the influence of different methods of carbon black (CB) incorporation in the compatible blend of 50/50 (wt %) Ethylene vinyl acetate (EVA) and Acrylonitrile butadiene elastomer (NBR) on different properties of vulcanized blend compounds. The partitioning of two types of CB in two different phases of the blend was estimated from dynamic mechanical analysis (DMA). The distribution of CBs due to preferential addition in different phases of the blend affects property variations in different degrees. From the analysis of SEM, TEM, AFM and electrical property measurements, it is found that mixing method significantly affects the electrical properties, morphology, and surface topography. The variation in AC conductivity and surface resistance study confirms the formation of different conductive network of CB with variation in mixing technique and it is supported by morphology analysis. The DMA have shown that CB has higher affinity towards less viscous EVA phase. This is further corroborated by the surface energy measurement, which in turn controls the electrical conductivity behaviour as well as mechanical properties of the blends.     

Morphology and properties of super-toughened bio-based poly(lactic acid)/poly(ethylene-co-vinyl acetate) blends by peroxide-induced dynamic vulcanization and interfacial compatibilization

Super-toughened poly(lactic acid) (PLA)/poly(ethylene-co-vinyl acetate) (EVA) blends were prepared via 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane (AD) induced dynamic vulcanization and in situ interfacial compatibilization. The effects of AD on the morphology and properties of PLA/EVA blends were studied using a Brabender torque rheometer, gel content test, scanning electron microscopy (SEM), differential scanning calorimetry (DSC) thermogravimetric analysis (TGA) and mechanical properties test. The torque and gel content demonstrated that EVA and PLA was successfully vulcanized in the presence of free radicals obtained by the decomposition of the 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane (AD). Additionally, the gel content results indicated that, compared with PLA, EVA is more aggressive with free radicals. The SEM revealed that a relatively uniform phase morphology and good interfacial compatibilization were achieved in the dynamically vulcanized PLA/EVA/AD blends. The interfacial reaction and compatibilization between the component polymers resulted in the formation of super-toughened PLA/EVA blended materials.     

Effect of Electron Beam Irradiation and Ethylene Vinyl Acetate Copolymer on the Properties of NBR/HDPE Blends

The mechanical and physical properties of blends based essentially on nitrile butadiene rubber (NBR) and different ratios of high density polyethylene (HDPE) up to 25 parts per hundred part of rubber (phr) before and after electron beam irradiation were investigated. The values of tensile strength (TS), tensile modulus at 50% elongation (M₅₀), hardness and gel fraction % (GF%) of NBR/HDPE blends were increased with both irradiation dose and by increasing the content of HDPE in the blends. On the other hand, the values of elongation at break (E _b ) were decreased with both irradiation dose and the content of HDPE in the blends. By loading NBR/HDPE (100/25) blend with ethylene vinyl acetate (EVA) copolymer the mechanical and physico-chemical properties were improved. Moreover, the degree of improvement is proportional to the loading content of EVA.     

Viscoelastic behavior of polypropylene/nitrile rubber thermoplastic elastomer blends: Application of Kerner's models for reactively compatibilized and dynamically vulcanized systems

The viscoelastic properties of binary blends of nitrile rubber (NBR) and isotactic polypropylene (PP) of different compositions have been calculated with mean‐field theories developed by Kerner. The phase morphology and geometry have been assumed, and experimental data for the component polymers over a wide temperature range have been used. Hashin's elastic–viscoelastic analogy principle is used in applying Kerner's theory of elastic systems for viscoelastic materials, namely, polymer blends. The two theoretical models used are the discrete particle model (which assumes one component as dispersed inclusions in the matrix of the other) and the polyaggregate model (in which no matrix phase but a cocontinuous structure of the two is postulated). A solution method for the coupled equations of the polyaggregate model, considering Poisson's ratio as a complex parameter, is deduced. The viscoelastic properties are determined in terms of the small‐strain dynamic storage modulus and loss tangent with a Rheovibron DDV viscoelastometer for the blends and the component polymers. Theoretical calculations are compared with the experimental small‐strain dynamic mechanical properties of the blends and their morphological characterizations. Predictions are also compared with the experimental mechanical properties of compatibilized and dynamically cured 70/30 PP/NBR blends. The results computed with the discrete particle model with PP as the matrix compare well with the experimental results for 30/70, 70/30, and 50/50 PP/NBR blends. For 70/30 and 50/50 blends, these predictions are supported by scanning electron microscopy (SEM) investigations. However, for 30/70 blends, the predictions are not in agreement with SEM results, which reveal a cocontinuous blend of the two. Predictions of the discrete particle model are poor with NBR as the matrix for all three volume fractions. A closer agreement of the predicted results for a 70/30 PP/NBR blend and the properties of a 1% maleic anhydride modified PP or 3% phenolic‐modified PP compatibilized 70/30 PP/NBR blend in the lower temperature zone has been observed. This may be explained by improved interfacial adhesion and stable phase morphology. A mixed‐cure dynamically vulcanized system gave a better agreement with the predictions with PP as the matrix than the peroxide, sulfur, and unvulcanized systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1417–1432, 2004     

Preparation and characterization of flame retardant and low smoke releasing oil-resistant EVA/NBR blends

Nano-Si O2 and/or Mo O3 were introduced to ethylene-vinyl acetate/nitrile butadiene rubber(EVA/NBR) blends containing magnesium hydroxide(MH) and red phosphorus(RP) to further improve the mechanical properties, oil resistance, smoke suppression and flame retardancy. The results indicated that the tensile strength and oil resistance were significantly improved by incorporating nano-Si O2. Smoke suppression tests for EVA/NBR blend samples showed that both nano-Si O2 and Mo O3 can significantly reduce smoke release amount. The flammability characterization indicated that the blended sample with an LOI value of 33.0 could achieve V-0 level in the UL-94 test. Cone calorimetry test data showed the peak heat release rate was 67% lower than that for pure EVA/NBR. Thermal analysis showed that the presence of both nano-Si O2 and Mo O3 was beneficial to promoting char formation of the EVA/NBR blends. Char residual analysis suggested that Mo O3 aggregated in solid phase during combustion.     

Distribution of nanoclay in a new TPV/nanoclay composite prepared through dynamic vulcanization

In this article distribution of nanoclay between the two phases of a new class of dynamically vulcanized TPV based on POE/EVA(Polyethylene octene elastomer/ethylene vinyl acetate copolymer) elastomers prepared with various amounts of organoclay (0.5, 1 and 3 wt%) using dicumyl peroxide (DCP) as vulcanizing agent by reactive melt blending process has been studied. Different specimens of POE and POE/EVA blend with and without clay were prepared. The effects of organoclay on mechanical properties, swelling kinetics, crystallinity, vulcanization characteristics, dynamic mechanical behaviour, electrical properties and morphology were studied. DMA and morphological analysis revealed the formation of a Thermoplastic vulcanizate. XRD analysis showed decrease in crystallinity on addition of EVA in POE matrix. However, morphological observation of the fractured surface suggested that the smaller EVA domain was quite uniformly distributed into the POE phase and the clay phase was predominantly dispersed in the EVA phase of the TPVs and 0.5% clay mainly improved the mechanical properties and elongation of the blends. Swelling characteristics, electrical properties and storage modulus were also improved with the clay in case of the blend containing higher EVA content which further supports the fact that nanoclay was preferably distributed in the more polar EVA phase.     

Dynamically cured natural rubber/EVA blends: influence of NR‐g‐poly(dimethyl (methacryloyloxymethyl)phosphonate) compatibilizer

Graft copolymer of natural rubber and poly(dimethyl(methacryloyloxymethyl)phosphonate) (NR‐g‐PDMMMP) was prepared in latex medium via photopolymerization. It was then used to promote the blend compatibility of dynamically cured 40/60 natural rubber (NR)/ethylene vinylacetate copolymer (EVA) blends using various loading levels at 1, 3, 5, 7, 9, 12, and 15 wt%. It was found that the increasing loading levels of NR‐g‐PDMMMP in the blends caused the increasing elastic modulus and complex viscosity until reaching the maximum values at a loading level of 9 wt%. The properties thereafter decreased with the increasing loading levels of NR‐g‐PDMMMP higher than 9 wt%. The smallest vulcanized rubber particles dispersed in the EVA matrix with the lowest tan δ value was also observed at a loading level of 9 wt%. Furthermore, the highest tensile strength and elongation at break (i.e., 17.06 MPa and 660%) as well as the lowest tension set value (i.e., 27%) were also observed in the blend using this loading level of the compatibilizer. Addition of NR‐g‐PDMMMP in the dynamically cured NR/EVA blends also improved the thermal stability of the blend. That is, the decomposition temperature increased with the addition of the graft copolymer. However, the addition of NR‐g‐PDMMMP in the blends caused the decreasing degree of crystallinity of the EVA phase in the blend. However, the strength properties of the blend are still high because of the compatibilizing effect. Copyright © 2009 John Wiley & Sons, Ltd.     

Transport properties of crosslinked acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) blends

The diffusion and transport of organic solvents through crosslinked nitrile rubber/poly(ethylene‐co‐vinyl acetate) (NBR/EVA) blends have been studied. The diffusion of cyclohexanone through these blends was studied with special reference to blend composition, crosslinking systems, fillers, filler loading, and temperature. At room temperature the mechanism of diffusion was found to be Fickian for cyclohexanone–NBR/EVA blend systems. However, a deviation from the Fickian mode of diffusion is observed at higher temperature. The transport coefficients, namely, intrinsic diffusion coefficient (D*), sorption coefficient (S), and permeation coefficient (P) increase with the increase in NBR content. The sorption data have been used to estimate the activation energies for permeation and diffusion. The van't Hoff relationship was used to determine the thermodynamic parameters. The affine and phantom models for chemical crosslinks were used to predict the nature of crosslinks. The experimental results were compared with the theoretical predictions. The influence of penetrants transport was studied using dichloromethane, chloroform, and carbon tetrachloride. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1815–1831, 1999     

Rheology, morphology and mechanical properties of polyethylene/ethylene vinyl acetate copolymer (PE/EVA) blends

Rheology, morphology and mechanical properties of binary PE and EVA blends together with their thermal behavior were studied. The results of rheological studies showed that, for given PE and EVA, the interfacial interaction in PE-rich blends is higher than EVA-rich blends, which in turn led to finer and well-distributed morphology in PE-rich blends. Using two different models, the phase inversion composition was predicted to be in 45 and 47 wt% of the PE phase. This was justified by morphological studies, where a clear co-continuous morphology for 50/50 blend was observed. The tensile strength for PE-rich blends showed positive deviation from mixing rule, whereas the 50/50 blend and EVA-rich blends displayed negative deviation. These results were in a good agreement with the results of viscoelastic behavior of the blends. The elongation at break was found to follow the same trend as tensile strength except for 90/10 PE/EVA blend. The latter was explained in terms of the effect of higher co-crystallization in 90/10 composition, which increased the tensile strength and decreased the elongation at break in this composition. The results of thermal behavior of the blends indicated that the melting temperatures of PE and EVA decrease and increase, respectively, due to the dilution effect of EVA on PE and nucleation effect of PE on EVA.     

Nanoengineering core/shell structured brucite@polyphosphate@amine hybrid system for enhanced flame retardant properties

A novel organic-inorganic hybrid flame retardant consisting of a brucite core and a dodecylamine polyphosphate shell was synthesized by a facile nanoengineering route. The flammability characterization and synergistic flame retardant mechanism of the core/shell flame retardant (CFR) in ethylene-vinyl acetate (EVA) blends had been compared with EVA/physical mixture (PM, with the given proportion of brucite and dodecylamine polyphosphate as well as CFR) and EVA/brucite blends. With the same loading amount (40 wt%) of fillers in EVA, the peak heat release rate and smoke production rate of EVA/CFR blends were significantly reduced to 49% and 48% of that of EVA/PM blends, respectively. Meanwhile, the limiting oxygen index (LOI) was increased up to 32 (14.3% higher than that of EVA/PM blends) and the UL-94 test could achieve the V-0 rating. These remarkable properties were obtained just by nanoengineeing the core/shell structured brucite@polyphosphate@amine hybrid system, facilitating the formation of intact and compact residue with fence structure in process of polymer composite burning.     

Miscibility and Mechanical Behavior of SAN/NBR Blends

Summary: Aiming the development of high toughness polymer materials, blends of poly(styrene-co-acrylonitrile) (SAN) and poly(butadiene-co-acrylonitrile) (NBR) rubbers, with contents of acrylonitrile (AN) varying from 21 to 45%, were prepared by casting, coprecipitation and monoscrew extrusion followed by injection molding. SAN/NBR blends, prepared in the compositions (w/w) 90/10, 80/20, 70/30, 60/40, and 50/50, were characterized by differential scanning calorimetry (DSC) and Izod impact tests. DSC analyses showed that blends with 33% AN NBR prepared by casting, and with 39% AN NBR prepared by coprecipitation, are partially miscible at 60/40, 70/30 and 80/20 (SAN/NBR) compositions and immiscible for 50/50 compositions. On the other hand, 90/10 SAN/NBR systems were totally miscible. The blends with 45% AN NBR prepared by coprecipitation showed partial miscibility to 50/50, 60/40, 70/30 and 90/10 compositions and total miscibility to 80/20 composition. The NBR addition results in a significant increase in the impact resistance, strongly dependent on the blend composition and the NBR AN content. The best result of impact resistance — 75.2 ± 8.6 (kJ · m⁻²) — was obtained for SAN/NBR 50/50, using 45% AN NBR. This value is 15.7 times bigger than that for pure SAN -4.8 ± 0.7 (kJ · m⁻²).     

Relationship between electrical resistivity and particle dispersion state for carbon black filled poly (ethylene-<Emphasis Type="Italic">co</Emphasis>-vinyl acetate)/poly (<Emphasis Type="SmallCaps">L</Emphasis>-lactic acid) blend

It is known that the electrical volume resistivity of insulating polymers filled with conductive fillers suddenly decreases at a certain content of filler. This phenomenon is called percolation. Therefore, it is known that controlling resistivity in the semi-conductive region for carbon black (CB) filled composites is very difficult. When poly (ethylene-co-vinyl acetate) (EVA) is used as a matrix, the percolation curve becomes gradual because CB particles disperse well in EVA. In this study, the relationship between the dispersion state of CB particles and electrical resistivity for EVA/poly (L-lactic acid) (PLLA) filled with CB composite was investigated. The apparent phase separation was seen in the SEM photograph. It was predicted that the CB particles located into the EVA phase in the light of thermodynamical consideration, which was estimated from the wetting coefficient between polymer matrix and CB particles. The total surface area per unit mass of dispersed CB particles in the polymer blend matrix was estimated from small-angle X-ray scattering and the volume resistivity decreased with increasing CB content. The values of the surface area of CB particles in CB filled EVA/PLLA (25/75 wt%) and EVA/PLLA (50/50 wt%) polymer blends showed a value similar to that of the CB filled EVA single polymer matrix. In electrical volume resistivity measurement, moreover, the slopes of percolation curves of EVA/PLLA (25/75 wt%) and EVA/PLLA (50/50 wt%) filled with CB composite are similar to that of EVA single polymer filled with CB composite. As a result, it was found that CB particles selectively locate in the EVA phase, and then the particle forms conductive networks similar to the networks in the case of EVA single polymer used as a matrix.     

Conductive poly(butadiene-co-acrylonitrile)-polyaniline dodecylbenzenesulfonate [NBR-PAni.DBSA] blends prepared in solution

Blends of poly(butadiene-co-acrylonitrile) elastomer [NBR] and polyaniline dodecylbenzenesulfonate [PAni.DBSA], with electrical conductivities up to 10⁻² S cm⁻¹, have been prepared by solution mixing and casting. Miscibility was maximised for NBR with high acrylonitrile (ACN) content, as predicted on the basis of simple solubility parameter calculations. Blends prepared using NBR with 48 wt% ACN had the lowest electrical conductivity percolation thresholds, and were much more conductive than previous thermally mixed blends. Optical and electron micrographs of blends prepared from NBR 48 wt% ACN also showed the lowest levels of phase separation. The FT-IR spectra of NBR-PAni.DBSA blends resembled a superposition of the spectra of the pure materials, but with significant peak shifts due to changing intermolecular interactions between the polymers. Under DSC analysis, thermal events for blends prepared with NBR 48 wt% ACN also showed the largest temperature shifts relative to those for the pure polymers, supporting the other evidence for interaction between the two polymers.     

Thermogravimetric Analysis and Thermal Ageing of Crosslinked Nitrile Rubber/Poly(ethylene-co-vinyl Acetate) Blends

The thermal behaviour of nitrile rubber (NBR)/poly(ethylene-co-vinyl acetate) (EVA) blends was studied by thermogravimetry. The effects of blend ratio, different crosslinking systems (sulphur, peroxide and mixed), various fillers (silica, clay and carbon black) and filler loading on the thermal properties were evaluated. It was found that the initial decomposition temperature increased with the addition of NBR to EVA. Among the various crosslinking systems studied, the peroxide cured system showed the highest initial decomposition temperature. This is associated with the high bond dissociation energy of C–C linkages. The addition of fillers improved the thermal stability of the blend. The mass loss at different temperatures and activation energy of degradation were also studied. The thermal ageing of these blends was carried out at 50 and 100°C for 72 h. It was seen that the properties are not affected by the mild ageing condition. Also, the peroxide cured system was found to exhibit better retention in properties, than other crosslinking systems. This revised version was published online in August 2006 with corrections to the Cover Date.     

Studies on phase morphology and thermo-physical properties of nitrile rubber blends

The study deals with the morphological and thermal analysis of binary rubber blends of acrylonitrile-co-butadiene rubber (NBR) with another polymer. Either ethylene propylene diene terpolymer (EPDM), ethylene vinyl acetate (EVA), chlorosulphonated polyethylene (CSM), or polyvinyl chloride (PVC) has been selected for the second phase. Depending on the relative polarity and interaction parameter of the components, the binary blends showed development of a bi-phasic morphology through scanning electron microscopy (SEM). Use of different types of thermal analysis techniques revealed that these blends are generally incompatible excepting one of NBR and PVC. Derivative differential scanning calorimetry (DDSC), in place of conventional DSC, has been used to characterize the compatibility behavior of the blends. NBR–PVC shows appearance of only one glass transition temperature (T _g) averaging the individual T _g’s of the blend components. The partially missible blend of NBR and CSM shows a broadening of T _g interval between the phase components, while the immiscible blends of either NBR–EPDM or NBR–EVA do not show any change in T _g values corresponding to the individual rubbers of their blend. The experimental T _g values were also compared with those calculated theoretically by Fox equation and observed to match closely with each other. Studies have also been made to evaluate the thermal stability of these blends by thermo-gravimetric analysis (TG) and evaluation of activation energy of respective decomposition processes by Flynn and Wall method. Thermo-mechanical analysis (TMA) was found to be effective for comparison of creep recovery and dimensional stability of the blends both at sub-ambient as well as at elevated temperatures.     

Flammability characteristics and flame retardant mechanism of phosphate-intercalated hydrotalcite in halogen-free flame retardant EVA blends

The flammability characteristics and flame retardant mechanism of phosphate-intercalated hydrotalcite (MgAl-PO₄) in the halogen-free flame retardant ethylene vinyl acetate (EVA) blends have been studied by X-ray diffraction (XRD), Fourier transfer infrared (FTIR) spectroscopy, cone calorimeter test (CCT), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), limiting oxygen index (LOI) and UL-94 tests. The results show that the hydrotalcite MgAl-PO₄ intercalated by phosphate possesses the enhanced thermal stability and flame retardant properties compared with ordinary carbonate-intercalated hydrotalcite MgAl-CO₃ in the EVA blends. The CCT tests indicate that the heat release rate (HRR) and mass loss rate (MLR) values of the EVA/MgAl-PO₄ samples are much lower than those of the EVA/MgAl-CO₃ samples. The TGA data show that the thermal degradation rates of MgAl-PO₄ and EVA/MgAl-PO₄ samples are much slower and leave more charred residues than those of MgAl-CO₃ and its corresponding EVA blends. The LOI values of EVA/MgAl-PO₄ samples are 2% higher than those of the corresponding EVA/MgAl-CO₃ samples at the range of 40–60 wt% loadings, while the EVA sample with 55 wt% MgAl-PO₄ can reach the UL-94 V-1 rating. The dynamic FTIR spectra reveal that the flame retardant mechanism of MgAl-PO₄ can be ascribed to its catalysis degradation of the EVA resin, which promotes the formation of charred layers with the P–O–P and P–O–C complexes in the condensed phase. The SEM observations give further evidence of this mechanism that the compact charred layers formed from the EVA/MgAl-PO₄ sample effectively protect the underlying polymer from burning.     

Effect of halloysite nanotube on microstructure,rheological and mechanical properties of dynamically vulcanized PA6/NBR thermoplastic vulcanizates

Dynamically vulcanized thermoplastic vulcanizate (TPV) nanocomposites based on polyamide-6 (PA6) and acrylonitrile butadiene rubber (NBR) reinforced by halloysite nanotubes (HNT) were prepared via a direct melt mixing process. The effects of HNT on the physical, mechanical, and rheological properties of nanocomposites were investigated. The prepared PA6/NBR/HNT nanocomposites were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning colorimeter (DSC), dynamic mechanical thermal analysis (DMTA), and rheological measurements. The morphology study of prepared nanocomposites shows that the introduction of HNT into the PA6 phase causes a decrease in the size of NBR droplets. The mechanical measurements revealed that Young’s modulus of TPV nanocomposites increased with the HNT loading up to 54%. DMTA results show that the introduction of 10 wt% of HNT into the PA6/NBR TPV leads to a 30% increase in storage modulus. The rheological measurements revealed that the storage modulus of nanocomposites has an increase of more than 200% in the presence of 7 wt% of HNT loading. Analytical stiffness modeling of Young’s modulus of the TPV nanocomposites was investigated using Hui–Shia and Wu models. Both models have some deviations from experimental results and been modified to predict Young’s modulus of the nanocomposites containing HNT with more precisions. The viscosity behavior of TPV nanocomposites was studied using a Carruea–Yasuda model and showed that the yield stress of nanocomposites increases with higher HNT loadings, indicating the formation of a nanotube network along with NBR phase network.     

Nonisothermal crystallisation, melting behavior and wide angle X-ray scattering investigations on linear low density polyethylene (LLDPE)/ethylene vinyl acetate (EVA) blends: effects of compatibilisation and dynamic crosslinking

Crystallisation studies on LLDPE/EVA blends and the individual components were performed with wide angle X-ray scattering (WAXS) technique and differential scanning calorimetry (DSC) DSC was used to characterise the quiescent crystallisation behavior. The heat of fusion and crystallinity of the blends were reduced by the addition of EVA. The experimental and theoretical values of crystallinity of the blends were found to be mutually agreeing. Crystallisation of LLDPE remains impeded to some extent due to the presence of amorphous EVA. Compatibilisation does not affect crystallinity whereas crosslinking decreases crystallinity. Crosslinking and compatibilisation make no significant change in the melting temperature of the blends. X-ray diffraction studies were carried out on un-crosslinked and crosslinked LLDPE/EVA blends with a view to study the effect of blend composition and crosslinking on crystallinity and lattice distance. Studies revealed that LLDPE and EVA have orthorhombic unit cell. Blending with EVA did not affect the crystalline structure of LLDPE, but the crystallinity decreases with EVA content. At low concentrations of EVA the lattice parameters remain unchanged. Above 30% EVA content however, a linear increase has been observed. Dicumyl peroxide (DCP) crosslinked samples show considerable shift of (1 1 0), (2 0 0) and (0 2 0) crystalline peaks towards lower 2θ values indicating an increase of unit cell parameters of the orthorhombic unit cell of polyethylene. At lower EVA-concentrations (<50%) the crystalline structure remains unchanged. For EVA-contents of more than 70% however, increasing DCP-content reduces the crystallinity of the blends and increases the lattice distance. This indicates that DCP-crosslinking is more effective in EVA phase than in the LLDPE phase.