A novel synthetic method for preparing poly(2,6-dimethyl-1,4-phenylene oxide)/polystyrene alloy in reactor containing aqueous medium

Considering the defect of solution polymerization of 2,6-dimethylphenol (DMP), the low molecular weight of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) synthesized in water and difficulty in processing of PPO, a novel one-pot synthetic method for preparing PPO/PS alloy in reactor containing aqueous medium was proposed based on green chemistry. In the presence of styrene, DMP was polymerized to form PPO, and then styrene was in situ polymerized under the initiation of dibenzoyl peroxide (BPO) and dicumyl peroxide (DCP), finally thermodynamically compatible PPO/PS alloy was prepared. It was found that the introduction of styrene during the oxidative polymerization of DMP could increase the molecular weight of PPO. When styrene content was 50 wt%, for the synthesized PPO/PS alloy the yield and the weight-average molecular weight were determined to be 95% and 1.7 × 10⁵ for PPO, 93% and 2.0 × 10⁵ for PS, respectively.     

Study on the polymerizations of methyl methacrylate and styrene initiated with chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine

Methyl methacrylate (MMA) and styrene (St) have been radically polymerized in the presence of chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine (Me₃SiCl/CuCl/PMDETA). An analysis of the resultant polymers by ¹H NMR discloses terminal silyl group and chlorine atom in all the obtained polymers. Kinetics studies have been carried out by measuring monomer conversions and polymer molecular weights against polymerization time. The results indicate that, for both MMA and St polymerizations, the monomer conversions exhibit a quasi-linear relationship with polymerization time, and the polymer number-average molecular weight (M_n) also increases with monomer conversion. The molecular weights of both PS and PMMA exceed one hundred thousand. Regardless of molecular weight, all the polymers show narrow molecular distributions (M_w/M_n = 1.2-1.5). These polymerization reactions are speculated to follow a mechanism similar to that of atom transfer radical polymerization (ATRP).     

Study on controlled/living free-radical polymerization of methyl acrylate in the presence of benzyl 9H-carbazole-9-carbodithioate under thermal condition

The polymerizations of methyl acrylate have been studied under thermal condition using benzyl 9H-carbazole-9-carbodithioate (BCCDT) as control agent. The obtained polymers were characterized by gel permeation chromatography (GPC), ¹H nuclear magnetic resonance (¹H NMR) and MALDI-TOF mass spectra. The results at 60 °C show that the molecular weight of the polymer increases linearly with monomer conversion, the molecular weight distribution is fairly narrow (even inferior to 1.10), and there exists a linear relationship between ln ([M]₀/[M]) and polymerization time. It is worthy of being noticed that the narrow polydispersities are comparable with those from living anionic polymerization. All of the evidences indicate that the polymerization is a good ‘living’ process. When the experiment is carried out at higher temperature, the polymerization rate is markedly faster with controlled polymerization characters except for a relatively broader polydispersity. The good control for free radical polymerization may be correlated with the large conjugation structure of carbazyl of BCCDT.     

Thermal stability and high glass transition temperature of 4-chloromethyl styrene polymers bearing carbazolyl moieties

A new styrene derivative monomer, 4-(N-carbazolyl)methyl styrene (CzMS), was synthesized by reacting 4-chloromethyl styrene with carbazole in the presence of sodium hydride. Then, CzMS was homopolymerized and copolymerized with different monomers such as methyl methacrylate (MMA), ethyl methacrylate (EMA), methyl acrylate (MA), ethyl acrylate (EA) and n-butyl acrylate (BA) by free radical polymerization method in N,N-di-methylformamide (DMF) solution at 70 ± 1 °C using azobisisobutyronitrile initiator to give the copolymers I-V in good yields. The structure of all the resulted polymers was characterized and confirmed by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The average molecular weight and glass transition temperature of polymers were determined using gel permeation chromatograph (GPC) and differential scanning calorimeter (DSC) instruments, respectively. It was found that these polymers with carbazole moieties have high thermal stability and the presence of bulk carbazole groups in polymer side chains leads to an increase in the rigidity and glass transition temperature of polymers.     

Synthesis and electroluminescence properties of carbazole-containing 2,6-naphthalene-based conjugated polymers

Three types of carbazole containing 1,5-disubstituted poly(2,6-naphthalene) derivatives, i.e., 2,6-naphthalene homopolymer that has a carbazolyl side chain at 1,5-positions, random copolymers and alternating copolymers consisting of 1,5-dialkoxynaphthalene-2,6-diyl and N-phenylcarbazole-2,7-diyl were newly synthesized by Ni-mediated Yamamoto polycondensation and Pd-catalyzed Suzuki coupling reaction. The number-average molecular weights (M_n) of the polymers and their polydispersity indices (M_w/M_n) were 5.4-8.2 × 10³ and 1.4-1.7, respectively. These polymers exhibited blue photoluminescence in the film states and high fluorescence quantum efficiencies in CHCl₃ (?_fl = 0.70-1.00). The electroluminescence properties of these polymers were investigated by fabricating a PLED device that has a configuration of ITO/PEDOT(PSS)/polymer/CsF/Al. The device fabricated with the random copolymer exhibited highest performances showing a maximum brightness of 8370 cd/m² at 13 V and a maximum efficiency of 2.16 cd/A at 7 V.     

Synthesis and characterization of para-nitro substituted 2,6-bis(phenylimino)pyridyl Fe(II) and Co(II) complexes and their ethylene polymerization properties

Four iron(II) and cobalt(II) complexes ligated by 2,6-bis(4-nitro-2,6-R₂-phenylimino)pyridines, LMCl₂ (1: R = Me, M = Fe; 2: R = iPr, M = Fe; 3: R = Me, M = Co; 4: R = iPr, M = Co) have been synthesized and fully characterized, and their catalytic ethylene polymerization properties have been investigated. Among these complexes, the iron(II) pre-catalyst bearing the ortho-isopropyl groups (complex 2) exhibited higher activities and produced higher molecular weight polymers than the other complexes in the presence of methylaluminoxane (MAO). A comparison of 2 with the reference non-nitro-substituted catalyst (2,6-bis(2,6-diisopropylphenylimino)pyridyl)FeCl₂ (FeCat 5) revealed a modest increase of the catalytic activity and longer lifetime upon substitution of the para-positions with nitro groups (activity up to 6.0 × 10³ kg mol⁻¹ h⁻¹ bar⁻¹ for 2 and 4.8 × 10³ kg mol⁻¹ h⁻¹ bar⁻¹ for 5), converting ethylene to highly linear polyethylenes with a unimodal molecular weight distribution around 456.4 kg mol⁻¹. However, the iron(II) pre-catalyst 1 on changing from ortho-isopropyl to methyl groups displayed much lower activities (over an order of magnitude) than 2 under mild conditions. As expected, the cobalt analogues showed relatively low polymerization activities.     

pH-labile sheddable block copolymers by RAFT polymerization: Synthesis and potential use as siRNA conjugates

Well-defined amphiphilic block copolymers composed of hydrophilic and hydrophobic blocks linked through an acid-labile acetal bond were synthesized directly by RAFT polymerization using a new poly(ethylene glycol) (PEG) macroRAFT agent modified with an acid-labile group at its R-terminal. The new macroRAFT agent was used for polymerization of poly(t-butyl methacrylate) (PtBMA) or poly(cholesterol-methacrylate) (PCMA) to synthesize well-defined block copolymers with a PEG block sheddable under acidic conditions. The chain extension polymerization kinetics showed known traits of RAFT polymerization. The molecular weight distributions of the copolymers prepared using the new macroRAFT agent remained below 1.2 during the polymerizations and the molecular weight of the copolymers was linearly proportional to monomer conversions. The acid-catalyzed hydrolysis behavior of the PEG-macroRAFT agent and the PEG-b-PtBMA (Mn = 13,600 by GPC, PDI = 1.10) was studied by GPC, ¹H NMR and UV–vis spectroscopy. The half-life of acid-hydrolysis was 70 min at pH 2.2 and 92 h at pH 4.0. The potential use of the pH-labile shedding behavior of the copolymers was demonstrated by conjugating a thiol-modified siRNA to ω-pyridyldisulfide modified PEG-b-PCMA. The resultant PEG-b-PCMA-b-siRNA triblock modular polymer released PCMA-b-siRNA segment in acidic and siRNA segment in reductive conditions, as confirmed by polyacrylamide gel electrophoresis.     

Waterborne RAFT polymers

A recently invented novel family of RAFT (Reversible Addition-Fragmentation chain Transfer) agents having a common formula Z-C(S)-S-CR₂COOR¹ where Z = -SR, -NR₂, or -OR, and R¹ represents H or a variety of functional groups allows for tailoring their hydrophilicity-hydrophobicity balance. A limited hydrophilicity of the RAFT agents can be achieved which is sufficient for their diffusion through water, yet the agents are hydrophobic enough to phase-separate out of water. Thus, the limited hydrophilicity of otherwise hydrophobic agents allows them to be at the loci of polymerization making them suitable for the emulsion polymerization mechanism. With several RAFT agents, good control over molecular weight was demonstrated for a broad variety of ab initio acrylic emulsion polymers. For methyl methacrylate, a portion of RAFT did not engage, resulting in less than the theoretical number of polymer chains. It was found, however, that as little as ∼10 wt% of an acrylic monomer slowed down polymerization enough to engage all RAFT agent molecules and yield predicted molecular weights. A broad variety of colorless and odorless telechelic acrylic and methacrylic emulsion polymers were synthesized.Microemulsion and solution-dispersion techniques produced clean colloidally stable RAFT dispersions. These two techniques did not require RAFT agents with tailored hydrophilicity-hydrophobicity.The UV spectra and photooxidative stability of the RAFT polymers were studied. The RAFT fragment in polymers appeared to have no impact on their photooxidative stability.     

Protein–polymer hybrids: Conducting ARGET ATRP from a genetically encoded cleavable ATRP initiator

Protein–polymer hybrids are an important class of biomaterials. Described is the preparation of a genetically incorporated a non-canonical amino acid (nCAA) containing an ester linked atom transfer radical polymerization (ATRP) initiator, followed by a controlled “grafting from” polymerization. A Methanococcus jannaschii tyrosyl-tRNA synthetase/tRNA_CUA pair was selected to genetically encode p-bromoisobutyryloxymethyl-l-phenylalanine (biF) in response to an amber codon. This biF was directly incorporated into green fluorescent protein (GFP) at residue 134 generating biF-GFP. Activators regenerated by electron transfer (ARGET) ATRP was conducted under biologically relevant conditions to graft well-defined poly(oligo ethylene oxide methacrylate) from the biF-GFP. The biF-GFP retained its biofluorescence properties throughout the polymerization indicating the utility of ARGET ATRP for preparing protein–polymer hybrids. The presence of a base-labile ester bond in the initiator, allowed cleavage of the grafted polymer from the protein and directly analyze their molecular weight and molecular weight distribution using gel permeation chromatography (GPC). The cleaved final polymer had a M_n = 27,000 and a molecular weight distribution of M_w/M_n = 1.27.     

Solvent effect in cis-1,4 polymerization of 1,3-butadiene by a catalyst based on neodymium

In this work a laboratory polymerization scale process was studied for the production of polybutadiene with high content of cis-1,4 repeating units. A Ziegler-Natta catalytic system based on neodymium versatate (catalyst), diisobutylaluminium hydride (cocatalyst) and tert-butyl chloride (chlorinating agent) was used. The influence of solvent nature (pure grade) and possible contaminants (electron donors) in a recovered solvent from a butadiene-styrene anionic polymerization industrial plant on the stereoselectivity and catalytic activity, molecular weight and molecular weight distribution of the resultant polybutadienes was studied. The polymers were characterized by infrared spectroscopy and size exclusion chromatography. Polybutadienes with cis-1,4 units content in the range of 99-98% were produced. The polymers weight-average molecular weight, , varied from 2.23 × 10⁵ to 4.47 × 10⁵ and the molecular weight distribution, MWD, from 3.1 to 5.1.     

Atom transfer radical polymerization of a novel quinoline derivative monomer and fluorescent property

A novel functional monomer incorporating quinoline derivative moiety as the side group, 2-[4-(2,7,7-trimethyl-3-ethoxycarbonyl-5-oxo-1,4,5,6,7,8-hexhydricquinoline)phenoxyl] ethylmethacrylate (HQPEMA), was synthesized and polymerized utilizing atom transfer radical polymerization (ATRP) technique. 2-(4-Chloromethylphenyl)benzoxazole (CMPB) and CuCl/PMDETA were used as the initiator and catalyst, respectively. GPC, ¹H NMR and fluorescent emission spectroscopy were conducted for characterization of polymers. The linear increase of number average molecular weight (M_n) versus conversion and the relatively narrow molecular weight distribution (M_w/M_n) of the obtained polymers confirmed that ATRP of HQPEMA was carried out successfully. In addition, the fluorescence “structural self-quenching effect” was observed in the DMF solution of the monomer HQPEMA, which bearing both electron-donating chromophore group and electron-accepting CC bond. We also found that the fluorescence properties of the newly obtained polymers containing quinoline chromophore depended on both the monomer concentration in solution and the polarity of solvents. The emission of the polymer film showed that the emission peak maxima of the polymer film shifted 50 nm towards high wavelength with respect to the polymer in DMF solution due to the intermolecular or intramolecular interactions of the polymer chains.     

Synthesis and polymerization of active ester monomers based on 4-vinylbenzoic acid

Nine active ester monomers based on 4-vinylbenzoic acid have been synthesized. Under free radical polymerization conditions these monomers could successfully be polymerized yielding reactive polymers with molecular weights of around M_n = 20.000-50.000 g/mol and molecular weight distributions M_w/M_n of around or below 2 in good yields. Polymer analogous reactions with amines have been investigated by time-resolved FT-IR spectroscopy and it was found that especially poly(pentafluorophenyl 4-vinylbenzoate) featured a significant reactivity, such that polymer analogous reactions proceeded quantitatively with amines within less than 5 min at 0 °C.     

Vinyl polymerization of norbornene catalyzed by a series of bis(β-ketoiminato)nickel (II) complexes in the presence of methylaluminoxane

A series of nickel complexes with β-ketoiminato ligands based on pyrazolone derivative were synthesized and characterized, which are highly active catalyst precursors for norbornene polymerization under mild reaction conditions through a vinyl-type polymerization mechanism. The catalytic activity could be up to 3.38 × 10⁷ g polymer/mol Ni h. The molecular weight distributions of the polynorbornenes (M_w/M_n = 2.05-2.56) indicate the presence of a single active species in the polymerization process.     

Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

Investigation on lipase-catalyzed solution polymerization of cyclic carbonate

In this study, 26-membered macrocyclic carbonate, cyclobis(decamethylene carbonate) [(DMC)₂] was attempted to undergo ring-opening polymerization by lipase catalysis in toluene. Novozym-435 exhibited even higher catalytic activity towards (DMC)₂ polymerization compared with SnOCt₂ while high molecular weight (M_n) of 5.4 × 10⁴ and yield of 99% was still achieved at ultra-low enzyme/substrate (E/S) weight ratio of 1/200. ¹H NMR spectra demonstrated the existence of terminal hydroxyl group. Solid phase polymerization in the absence of toluene unexpectedly took place at the temperature lower than (DMC)₂’s melting point of 110 °C. Compared with solvent-free case, the addition of toluene solvent resulted in marked increase in reaction rate. As to the polymerization during 48 h with the E/S weight ratio of 1/100, a region existed at around toluene/carbonate (vol/wt, ml/g) ratio of 1∼2 where the polymerizations gave optimal results in terms of both higher molecular weight and monomer conversion. It was found that much higher molecular weight polymers may be obtained by decreasing enzyme concentrations. Plots of ln{[M]₀:[M]_t} versus reaction time were in linear agreement, indicating no chain termination, and monomer consumption follows a first-order rate law. The Novozym-435 catalyzed polymerization of (DMC)₂ in toluene presented pseudo-living characteristic. Compared with 6-membered trimethylene carbonate, much lower reaction activity of large-sized (DMC)₂ is observed, which is opposite to the result concerning the enzymatic polymerization of lactones with different ring-size.     

Microwave-assisted McMurry polymerization utilizing low-valent titanium for the synthesis of poly 2,6-[1,5-bis(dodecyloxy)naphthylene vinylene] (PNV)

Poly 2,6-[1,5-bis(dodecyloxy)naphthylene vinylene] is synthesized by microwave-assisted McMurry polymerization utilizing low-valent titanium generated from titanium tetrachloride and zinc. The obtained polymer is fluorescent with an average molecular weight of approximately 65,000 g/mol and a polydispersity of M_w/M_n ≈ 3. Absorption and fluorescence spectroscopy in solution and on spin-cast thin films reveal that the bis-alkoxy substituted PNV has a short effective conjugation length but a quite efficient exciton migration.     

Molecularly imprinted polymer microspheres prepared by Pickering emulsion polymerization for selective solid-phase extraction of eight bisphenols from human urine samples

The bisphenol A (BPA) imprinted polymer microspheres were prepared by simple Pickering emulsion polymerization. Compared to traditional bulk polymerization, both high yields of polymer and good control of particle sizes were achieved. The characterization results of scanning electron microscopy and nitrogen adsorption–desorption measurements showed that the obtained molecularly imprinted polymer microsphere (MIPMS) particles possessed regular spherical shape, narrow diameter distribution (30–60 μm), a specific surface area (S_BET) of 281.26 m² g⁻¹ and a total pore volume (V_t) of 0.459 cm³ g⁻¹. Good specific adsorption capacity for BPA was obtained in the sorption experiment and good class selectivity for BPA and its seven structural analogs (bisphenol F, bisphenol B, bisphenol E, bisphenol AF, bisphenol S, bisphenol AP and bisphenol Z) was demonstrated by the chromatographic evaluation experiment. The MIPMS as solid-phase extraction (SPE) packing material was then evaluated for extraction and clean-up of these bisphenols (BPs) from human urine samples. An accurate and sensitive analytical method based on the MIPMS-SPE coupled with HPLC-DAD has been successfully established for simultaneous determination of eight BPs from human urine samples with detection limits of 1.2–2.2 ng mL⁻¹. The recoveries of BPs for urine samples at two spiking levels (100 and 500 ng mL⁻¹ for each BP) were in the range of 81.3–106.7% with RSD values below 8.3%.     

High Tg nematic thermosets: Synthesis, characterization and thermo-mechanical properties

In this paper the synthesis and characterization of a new family reactive nematic oligomers based on 4-hydroxybenzoic acid (4-HBA) will be presented. We modified the backbone using para- and meta-substituted aromatic monomers such as terephthalic acid (TA), isophthalic acid (IA), hydroquinone (HQ), resorcinol (RS), 4,4′-bisphenol (BP) and 3-hydroxybenzoic acid (3-HBA). All oligomers, with a target M_n of 5000 and 9000 g mol⁻¹, were end-capped with reactive phenylethynyl functionalities and synthesized using standard melt condensation techniques. Curing of the phenylethynyl reactive functionalities proceeds through chain extension and crosslinking, depending upon the temperature and time and can be carried out between 310 and 400 °C. Fully cured nematic thermosets could be obtained with glass-transition temperatures previously not accessible (T_g > 400 °C). The cured polymers exhibit excellent tensile properties, i.e. tensile strength (83 MPa) and elongation at break (9%). This approach allows us to prepare all-aromatic polymers with a combination of useful properties such as ease of processing, high T_g’s, and excellent mechanical properties.     

Synthesis and characterization of poly(phenylene oxide) graft copolymers by atom transfer radical polymerizations

A series of comb-like poly(phenylene oxide)s (PPO) graft copolymers with controlled grafting density and length of grafts were synthesized by atom transfer radical polymerization (ATRP). The α-bromo-poly(2,6-dimethyl-1,4-phenylene oxide)s (BPPO) were used as macroinitiators to polymerize vinyl monomers and the graft copolymers carrying polystyrene (PS), poly(p-acetoxystyrene) (PAS), and poly(methyl methacrylate) (PMMA) as side chains were synthesized and characterized by NMR, FTIR, GPC, DSC and TGA. The composition-dependent glass-transition temperatures (T_g) of PPO-g-PS exhibited good correlation with theoretical curve in Couchman equations except for the cases of low PS content (<40 mol%) copolymers in which a positive deviation was observed due to enhanced molecular interactions. The increase in monomer/initiator ratio led to the increase of degree of polymerization and the decrease of polydispersity. Despite the immiscibility nature between PPO and PMMA, the PPO-g-PMMA exhibited enhanced compatibilization as apparent single T_g in a wide temperature window throughout various compositions revealing an efficient segmental mixing on a molecular scale due to grafting structure.