Post-polymerization modification of aromatic polyimides via Diels-Alder cycloaddition

We report a facile post-polymerization modification route to functionalized aromatic polyimides via Diels-Alder cycloaddition. Aromatic polyimides are important, versatile high-performance polymers; however, their structural diversity is restricted by the requirements of the step-growth polymerization. We prepared polyimides with alkynes in their main-chain as macromolecular dienophiles and quantitatively grafted tetraphenylcyclopentadienone based dienes. The resulting solution-processable, wholly aromatic polyimides show a considerable increase in surface area due to the induced conformational changes and bulky, rigid, and contorted molecular structures. The orthogonality of the reaction is exploited to insert functional groups, namely bromine and sulfonates, along the polymer backbone. In a further extension, the phenylene segments undergo cyclodehydrogenation to form nanographene segments within the polymer chains. The Diels-Alder cycloaddition onto polyimides is therefore demonstrated to be an effective, widely applicable route to tunable high-performance polymers with value-added functionality and thus considerable potential in a wide range of advanced materials.     

Preparation and properties of new photosensitive polyimides from bis(4-aminophenyl)tetramethyldisilane and various aromatic tetracarboxylic dianhydrides

New photosensitive polymides containing photosensitive disilane unit were synthesised from 1,2-bis(4-aminophenyl)tetramethyldisilane and various aromatic tetracarboxylic dianhydrides by the usual two-step procedure that includes ring-opening polyaddition to yield the precursor polyamic acids, followed by cyclodehydration giving the respective polyimides. The polymaic acids had inherent viscosities between 0.63 and 0.85 dL/g depending on the tetracarboxylic dianhydride used. Excepting the polyimide obtained from pyromellitic dianhydride, all other polyimides were soluble in N-methyl-2-pyrrolidone, m-cresol, and pyridine. While the polyimide containing diphenyl sulfone unit was amorphous, the other polyimides were semi-crystalline polymers based on their x-ray diffractograms. The polyimides had glass transition temperatures between 235 and 304°C. They were thermally stable up to 380°C in both air and nitrogen atmospheres. All the polyamic acids showed a drastic decrease in the inherent viscosity upon UV light irradiation, implying the inherent photosensitivity of the polymers containing the disilane moiety.     

高分子材料的微波辅助合成研究进展

微波加热以其省时、高效、清洁环保的显著优势而使微波辅助合成成为一种广受欢迎的合成技术。高分子材料的传统合成反应时间长、耗能大。将微波辐射应用于高分子材料的合成可缩短反应时间、降低反应能耗,已成为有机合成领域的研究热点。本文简要综述了微波辅助合成技术在工程材料高分子聚酰胺、聚酰亚胺、聚丙烯酸苄基酯以及在医用功能高分子、吸附功能高分子、导电功能高分子和光学功能高分子合成中的研究进展,并展望了微波辅助合成在高分子材料合成中的发展前景。     

微波辐射用于聚酰亚胺的研究进展

聚酰亚胺因具有优良的综合性能而得到广泛的研究.微波辐射在高分子化学研究领域中的应用越来越广泛,效果也十分明显.与常规加热方式相比,微波辐射具有内部加热、缩短反应时间、提高反应产率、节省能耗、无温度梯度、制得产物性能好等优点.近年来,微波辐射用于聚酰亚胺的研究越来越多.因此本文对微波辐射在聚酰亚胺的合成、三阶非线性光学、聚酰亚胺复合材料以及稀土-聚酰亚胺配合物等方面的应用进行了综述.     

微波辐射无皂乳液聚合制备聚氰基丙烯酸正丁酯微球

在微波辐射的"非致热效应"作用下,采用不含乳化剂的无皂乳液聚合,制备了聚氰基丙烯酸正丁酯(PBCA)微球。通过透射电子显微镜观察了微球的形态结构,利用激光光散射粒度测定仪测定了微球的粒径大小及其分布,探讨了柠檬酸浓度、氰基丙烯酸正丁酯(BCA)用量、微波辐射功率等对微球粒径的影响。研究结果表明,与常规无皂乳液聚合相比较,微波作用下的无皂乳液聚合反应时间缩短,得到的PBCA微球粒径更小,分散性更好。柠檬酸浓度增加,PBCA微球粒径逐渐增大;单体浓度增加,或微波功率增加,PBCA微球的粒径先减小后增大。当柠檬酸质量分数为0.005%、BCA体积分数为1.0%、微波功率为600W时,所制得的微球粒径最小,为200nm左右。     

Synthesis and characterization of novel polyesters derived from 4-aryl-2,6-bis(4-chlorocarbonyl phenyl) pyridines and various aromatic diols

A new class of aromatic polyesters containing pyridine heterocyclic rings (PE_1-15) was prepared via reactions of 4-aryl-2,6-bis(4-chlorocarbonyl phenyl) pyridines (DAC_1-3) and commercial diols by high temperature solution polymerization method in o-dichlorobenzene and catalytic amount of triethylamine hydrochloride. The optimum condition of polymerization was obtained via study of a model compound prepared from reaction of 4-phenyl-2,6-bis(4-chlorocarbonylphenyl) pyridine (DAC₁) and phenol. All polymers were characterized by FTIR and ¹H-NMR spectroscopies, and their physical properties including solution viscosity, solubility properties, thermal stability and thermal behavior were studied. The prepared polyesters showed excellent thermal stability and good solubility in polar aprotic solvents.     

Microwave Effects Due to Anionic or Cationic Initiators in Emulsion Polymerization Reactions

Summary: Emulsion polymerization reactions were performed under microwave irradiation and conventional heating using anionic or cationic initiators and surfactants. Microwave irradiation promoted higher reaction rates for both initiators and surfactants, in comparison with the conventional heating. The effect of high power microwave irradiation was studied using a method of cycles of heating and cooling, where rapid polymerization reactions were obtained. In the reactions with anionic initiator and surfactant, a decrease in the particle diameters was observed with microwave heating, and even smaller particles were obtained using high power microwave irradiation. Moreover, the decrease in the particle size was acompanied by an increase in the polymer molecular weight. On the other hand, these effects were not observed for reactions with cationic initiator and surfactant.     

Preparation and characterization of polyimides containing triaryl imidazole side groups

A novel triaryl imidazole‐containing diamine, 3,5‐diamino‐N‐(4‐(4,5‐diphenyl‐1H‐imidazol)phenyl)benzamide, was successfully synthesized via the condensation of 4‐(4,5‐diphenyl‐1H‐imidazol)benzenamine and 3,5‐dinitrobenzoyl chloride, followed by reduction of the dinitro compound. A series of new aromatic polyimides with pendent triaryl imidazole moieties were prepared from the reaction of this diamine with various tetracarboxylic dianhydrides by a conventional two‐step polymerization process via thermal and chemical imidizations. The polyimides were obtained in quantitative yields with inherent viscosities of 0.21–0.44 dL/g. All the polymers are readily soluble in polar organic solvents. Flexible and strong films of polyimides were obtained by solution casting. The glass transition temperature of these polymers was in the range of 261–264°C. They were fairly stable up to a temperature around 300°C and lost 10% weight at 408°C under nitrogen. The ultraviolet–visible absorption spectra showed that all of the polymers had absorption maxima around 320 nm with a fluorescence emission maxima around 388–407 nm in N‐methyl‐2‐pyrrolidinone solution. Cyclic voltammograms of the polyimides revealed an oxidation wave with a peak around 1.7 V. Copyright © 2016 John Wiley & Sons, Ltd.     

Fast synthesis of optically active polyamides containing <Emphasis Type="SmallCaps">l</Emphasis>-methionine linkages in ionic liquid via a microwave-assisted process

Several optically active aromatic polyamides have been synthesized via direct polycondensation of chiral diacid monomer 1 containing l-methionine moiety with diverse aromatic diamines 2a–2h in a green medium, namely 1,3-dipropylimidazolium bromide as a room temperature ionic liquid. In order to evaluate the advantages of microwave promotion of these polymerization reactions, we compared microwave irradiation (method I) with conventional oil bath heating (method II) by means of reaction rates, conversions, and inherent viscosities. The inherent viscosities of resulting polymers were ranging between 0.47–0.65 and 0.35–0.57 dL/g in methods I and II, respectively. These polymers were characterized by means of ¹H-NMR, FT-IR, elemental, organosolubility, differential scanning calorimetry, and thermal gravimetric analysis techniques. The obtained polymers show thermal stability up to 273 °C under nitrogen atmosphere and good solubility in polar organic solvents. Polymerization reactions proceeded in higher yields and moderate inherent viscosities under microwave irradiation conditions besides the dramatically shorter reaction times and achieving the more pure products.     

Microwave‐assisted suzuki coupling reaction for rapid synthesis of conjugated polymer–poly(9,9‐dihexylfluorene)s as an example

Long reaction period (dozens of hours) is often required for the synthesis of conjugated polymers by palladium‐catalyzed Suzuki polymerization reaction. This work shows that microwave can accelerate Suzuki polymerization to realize the ultra‐rapid synthesis of conjugated polymers, here poly(9,9‐dihexylfluorene)s (PDHFs) as an example. The effects of reaction conditions on the polymerization have been systematically investigated, including the mode of microwave irradiation, microwave power, reaction temperature, reaction time, solvents, catalyst species, and catalyst concentrations. Compared with the conventional heating method (oil bath) for the synthesis of PDHFs (48 h, M_w = 20,000 g/mol), Suzuki polymerization under optimized microwave condition can yield PDHFs with higher molecular weight (M_w = 40,000 g/mol) in a much shorter time (14 min). The structures of obtained PDHFs samples are fully characterized spectroscopically, demonstrating well‐defined PDHFs have been prepared through microwave‐assisted (MA) Suzuki polymerization reaction. In addition, the mechanism of MA Suzuki polymerization is proposed preliminarily. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Preparation and properties of novel soluble aromatic polyimides from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing triphenylamine unit were prepared by two different methods, i.e., a conventional two-step method starting from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides and the one-step thioanhydride method starting from the aromatic diamine and aromatic tetracarboxylic dithioanhydrides. Both procedures yielded high-molecular-weight polyimides with inherent viscosities of 0.47–1.17 dL/g. Some of these polymers were soluble in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, m-cresol, and pyridine. All the polyimides afforded transparent, flexible, and tough films, and the color varied from pale yellow to dark red, depending markedly on the tetracarboxylic acid components. The glass transition temperatures (T_gs) of these polyimides were in the range of 287–331°C and the 10% weight loss temperatures were above 520°C in air. The polyimides prepared by the one-step method exhibited better solubility in organic solvents and had somewhat lower T_gs than the polymers prepared by a conventional two-step method.     

A facile synthesis of polyamides from aromatic diisocyanates and dicarboxylic acid catalyzed by Lewis acids

Aromatic polyamides were prepared by an AlCl₃ or HCl-catalyzed polymerization of toluene diisocyanate or methylenebis(phenyl isocyanate) with adipic acid at low temperatures (≤100°C) in a short reaction time (3–4 h). The intrinsic viscosity of the polymers was approximately 1.1 dL/g as determined at 25°C with m-cresol as solvent, indicating that the polyamides obtained by this method have relatively high molecular weights. The polymers exhibit high glass transition temperatures and good thermal stability.     

Hyperbranched polyimides prepared by ideal A2+B3 polymerization,non-ideal A2+B3 polymerization and AB2 self-polymerization

In this paper, hyperbranched polyimides having the same repeating unit were synthesized by employing ideal A₂+B₃ polymerization, non-ideal A₂+B₃ polymerization and AB₂ self-polymerization methods. The polymerization behavior, polymer properties were compared for three methods. Hyperbranched polyimides by ideal A₂+B₃ polymerization, non-ideal A₂+B₃ polymerization and AB₂ self-polymerization methods show apparent difference in many physical properties, such as inherent viscosity, glass transition temperature, and film formation behavior etc. The hyperbranched polymers by the non-ideal A₂+B₃ polymerization are suitable for smooth, flexible and self-standing film preparation, which provides useful information for hyperbranched polymers toward self-standing materials.     

Soluble and Colorless Polyimides from Alicyclic Diamines

Abstract

A series of novel polyimides was synthesized from alicyclic diamines and various aromatic dianhydrides by one-step polymerization in m-cresol without a catalyst. The polymerization was conducted for 4 hours with refluxing, which was enough to obtain the polymers with high molecular weight. The inherent viscosities of the resulting polyimides were in the range of 0.30 ～1.29 dL/g. The prepared polyimides showed excellent thermal stabilities and good solubility. All the polymers were readily soluble in common organic solvents such as chloroform, tetrachloroethane (TCE), dimethylacetamide (DMAc), etc and the glass transition temperatures were observed at 199 to 311°C. UV-visible spectra were obtained to measure the transparency of polymer films. All the polymers showed high transmission above 90% in the wavelength of 400 ～700 nm.     

非含氟型磺化聚合物质子交换膜材料的研究进展(上)

概述了近十年来非含氟型磺化聚合物质子交换膜材料的研究进展,包括各种材料的制备和性质,详细地讨论了材料的化学结构、形态与其性能(质子导电率、耐水性、尺寸稳定性、吸水率、抗自由基氧化性、甲醇透过率等)之间的关系,其中结合作者在磺化聚酰亚胺方面的研究工作,重点对这类材料进行了系统、深入的介绍和讨论.最后,本文还对今后燃料电池用质子交换膜材料的研究提出了一些设想和展望.本文分为上下两篇,其中上篇主要综述了各种非含氟型磺化聚合物的制备方法.     

One-pot polyamidation reaction of optically active aromatic diacid containing methionine and phthalimide moieties with aromatic diamines under microwave irradiation and traditional heating

An optically active diacid containing phthalimide and l-methionine moiety was prepared in three steps, and was polymerized with several aromatic diamines to obtain a new series of optically active polyamides (PAs) through direct polyamidation using triphenyl phosphite/pyridine/N-methyl-2-pyrrolidone/CaCl₂ system as condensing agent. The polymerization reactions were carried out under both conventional heating and microwave-assisted irradiation. The data obtained by these methods indicate that, high yields and similar inherent viscosities are resulted. It is worth to mention that in the case of microwave conditions, a drastic decrease in reaction time (3 min vs. 5 h) and cleaner reaction have been achieved. These polymers are readily soluble in polar organic solvents such as N,N-dimethyacetamide, N,N-dimethyformamide, dimethyl sulfoxide. The obtained polymers were characterized by FT-IR, specific rotation measurements, elemental analysis and ¹H NMR techniques. The thermal stability of the resulting PAs were evaluated with thermogravimetric analysis and differential scanning calorimetry techniques under a nitrogen atmosphere which indicate they are moderately stable.     

Synthesis and characterization of organosoluble ditrifluoromethylated aromatic polyimides

Two novel diamine monomers, 1,4‐bis (4‐aminophenoxy)‐2‐[(3′,5′‐ditrifluoromethyl)phenyl]benzene and 1,4‐bis [2′‐cyano‐3′(4″‐amino phenoxy)phenoxy]‐2‐[(3′,5′‐ditrifluoromethyl)phenyl] benzene, were synthesized from (3,5‐ditrifluoromethyl)phenylhydroquinone. A series of ditrifluoromethylated aromatic polyimides derived from the diamines were prepared through a typical two‐step polymerization method. These polyimides had a high thermal stability, and the temperatures at 10% weight loss were above 507 °C in nitrogen. Most of the polymers showed good solubility in anhydrated 1‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, chloroform, and tetrahydrofuran at room temperature. All the polymers formed transparent, strong, and flexible films with tensile strengths of 63.6–95.8 MPa, elongations at break of 5–10%, and Young's moduli of 2.38–2.96 GPa. The dielectric constants estimated from the average refractive indices are 2.69–2.89. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3018–3029, 2005     

Structure and properties of poly(benzyl acrylate) synthesized under microwave energy

Benzyl acrylate was polymerized under microwave irradiation using radical initiation (benzoyl peroxide, BP). The effect of the concentration of BP and power irradiation on the conversion, average molecular weights and the polydispersity index (M_w/M_n) were investigated. The ¹H NMR and ¹³C NMR spectra analysis showed tendency to syndiotacticity and branched polymers were obtained at high conversion of reactions. A significant enhancement of the rates of polymerization and similar thermodynamic behavior, as compared with those obtained under thermal conditions was found.     

Unexpected selective enhancement of the thermal stability of aromatic polyimide materials by cerium dioxide nanoparticles

The unusual effect of selective enhancement of the thermal stability of aromatic polyimide materials was established through the introduction of cerium dioxide nanoparticles into these polymers as nanofiller. Depending on the chemical structure of the polymers, a marked increase or a substantial decrease in the thermal stability of the nanocomposite material was registered by thermal analysis, as compared with that of unfilled polymer material. The positive effect was registered only for the composite materials based on the matrix polyimides containing the sulfur atoms located in the sulfonic groups arranged in the elementary units. The results of the thermogravimetric examination are compared with the data obtained during the mechanical tests of the same samples. The possible reasons for the alteration of the thermal stability of polymers by ceria nanoparticles are discussed. The effect above can be of substantial practical interest providing new options for the design of polyimide nanocomposite materials with enhanced thermal stability.     

Soluble polyimides from a semi-aliphatic diamine containing ester,amide and ether groups

A diamine was synthesized by two successive reactions.Nucleophilic reaction of 4-hydroxybenzoic acid with terephthaloyl chloride yielded terephthaloyl bis(4-oxybenzoic) acid.Then reaction of this compound with 1,8-diamino-3,6- dioxaoctane via Yamazaki method resulted in preparation of diamine named terephthalic acid bis(4-{2-[2-(2-amino ethoxy)ethoxy]ethyl carbamoyl}phenyl) ester.After fully characterization it was used to prepare new polyimides through polycondensation with different dianhydrides using trimethylchlorosilane.Characterization of polymers was achieved by common methods and their physical properties including inherent viscosity,thermal behavior,thermal stability,crystallinity and solubility were studied.Prepared polyimides showed improved solubility and good thermal stability.