Latent ruthenium initiators containing fluoro aryloxide ligands

A new ligand, methyl 2,3,5,6-tetrafluoro-4-oxybenzoate (C₈H₃F₄O₃), combining an electron withdrawing group (C₆F₄) to tune the reactivity with an anchor group (CO₂Me) for immobilization on supports, was used to prepare four new ruthenium initiators, viz. Ru(C₈H₃F₄O₃)₂(CHPh)(3-Br-C₅H₅N)(H₂IMes) and Ru(C₈H₃F₄O₃)₂XL, where X = C,N-(CHCH₂CH₂-2-C₅H₄N) and L = PⁱPr₃, PCy₃ or H₂IMes. The new ligand greatly reduced the reactivity of the ruthenium centre at room temperature. The ¹H NMR and DSC investigation for the ROMP of norbornene dicarboximide monomers clearly demonstrated that the Ru(C₈H₃F₄O₃)₂XL initiators were inactive at room temperature and required elevated temperatures for their activation.     

Ring-opening metathesis polymerization (ROMP) of isomerically pure functional monomers and acyclic diene metathesis depolymerization (retro-ADMET) of functionalized polyalkenamers

ROMP and retro-acyclic diene metathesis (ADMET) were used for the synthesis of new functional polymers and functional oligomers, respectively. Purely exo and enantiomerically pure norbornene and 7-oxanorbornene derivatives were prepared using stereospecific synthesis, effective fractionation and high yield condensation reactions. Successful ROMPs of those monomers were performed using either the new carbenic Schrock’s or Grubb’s catalysts or in some cases a classical bicomponent catalyst. New functional polymers such as optically active poly(norbornene-2-carboxylic acid), reactive poly(norbornene-2-azlactone), and side-chain liquid crystal polyoxanorbornenes were fully characterized. On the other hand, successful depolymerizations of 1,4-polyisoprene and of epoxidized 1,4-polybutadiene via cross-metathesis with 4-octene were performed using a stabilized bicomponent catalyst and the Grubb’s catalyst, respectively. Conditions for the controlled synthesis of epoxidized oligobutadienes and of epoxydienic monomers via retro-ADMET were clearly defined.     

Experimental and computational study of intermolecular migration of N,N-dimethylcarbamoyl group from N(7) to N(1) on a 7-azaindoline derivative

N,N-Dimethylcarbamoylation of the anilinic nitrogen atom N(1) on the spiro 7-azaindoline consists of two steps. The first step is N,N-dimethylcarbamoylation of the pyridyl nitrogen atom N(7), leading to the formation of an isolable intermediate. The second step is intermolecular migration of the N,N-dimethylcarbamoyl group from the pyridyl nitrogen atom N(7) to the anilinic nitrogen atom N(1). We accomplished optimization of the reaction conditions based on the revealed reaction mechanism and a large scale synthesis of compound 3 in quantitative yield.     

Synthesis of N,N-dialkylaminobenzonitriles and halo-(N,N-dialkyl)benzamidines by reaction of halobenzonitriles with lithium amides

3- and 4-N,N-Dialkylaminobenzonitriles and 4-chloro-(N,N-dialkyl)benzamidines were isolated by reacting 4-chlorobenzonitrile with hindered lithium amides under thermodynamic (0 °C) and kinetic control conditions (−78 °C), respectively. As previously reported, a benzyne mechanism seems to be confirmed since N,N-dialkylaminobenzonitriles are formed. Only benzamidines were isolated in fair to high yields at both 0 °C and −78 °C with non-hindered lithium amides. Exploitation and mechanistic rationale of the reaction of different halobenzonitriles are also reported.     

Ring opening metathesis polymerization (ROMP) of five- to eight-membered cyclic olefins: Computational,thermodynamic, and experimental approach

Ring opening metathesis polymerization (ROMP) of a series of low-strain cyclic olefins and their hydroxyl derivatives using second generation Hoveyda–Grubbs catalyst has been investigated. Additionally, density functional theory (DFT) calculations were performed to evaluate the ring strain energies of the cyclic olefins and their hydroxyl derivatives, coupled with kinetic studies for the ROMP reactions. It was found that among different ring size monomers, Cy8 having a relatively moderate ring strain energy in comparison with the other cyclic olefins, exhibited the highest monomer conversion. The effect of temperature (0, 10, 15, and 25 °C) and monomer concentration (1 M; 2.5 M and 5 M for Cy5 ; and 1 M and 5 M for Cy7 ) for the cyclic olefins Cy5 and Cy7 were investigated. In general, the experimental results for the kinetic ROMP studies obtained using complex HG2 correlate really well with the DFT calculations determined for the ring strain energies of the cyclic olefins. For comparison, DFT calculations predicted the following trend for the ring strain energies Cy8 > Cy5 > Cy7 > Cy6 , and the polymerizations carried out experimentally followed the same trend in terms of monomer conversion, with the exception of Cy5 and Cy7 at lower concentrations, which followed this trend Cy8 > Cy7 > Cy5 > Cy6 . © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3137–3145     

Facile one-step synthesis of bis(NHC) ruthenium benzylidene catalyst for ring-closing metathesis

Bis(NHC) ruthenium benzylidene complex (H₂IMe)₂(Cl)₂RuCHPh (9) [H₂IMe = 1,3-bis(2,6- dimethylphenyl)-4,5-dihydroimidazol-2-ylidene] was synthesized facilely by one-step reaction of (PPh₃)₂(Cl)₂RuCHPh (7) with N-heterocyclic carbene (NHC) H₂IMe (6). Complex 9 proved to exhibit remarkable catalytic activity for ring-closing metathesis (RCM) reaction at increased temperature.     

N,N′-Dioxide-scandium(III) complex catalyzed highly enantioselective Friedel-Crafts alkylation of indole to alkylidene malonates

A highly efficient enantioselective Friedel-Crafts alkylation of indoles with alkylidene malonates has been developed using chiral N,N′-dioxide L4-scandium(III) complex as the catalyst, giving the corresponding products in high yields with excellent enantioselectivities (up to 99% yield and 95% ee). The product 3a was facilely converted into several interesting compounds, such as tryptamines, indolepropionic acids and β-carbolines. It is noteworthy that the seven-membered β-carboline-like compound has been synthesized for the first time. Based on the crystal structure of the chiral N,N′-dioxide L10-scandium(III) complex, the proposed transition state and possible catalytic cycle were presented to elucidate the reaction mechanism.     

N,N′-Diisopropyl- and N,N′-dicyclohexylthiourea cadmium(II) complexes as precursors for the synthesis of CdS nanoparticles

Crystals of the cadmium(II) complexes of N,N-diisopropylthiourea and N,N-dicyclohexylthiourea were obtained and their X-ray single crystal structures determined. These complexes are air-stable, easy to prepare and inexpensive and decompose cleanly to give good quality crystalline CdS. The nanoparticles of CdS thus obtained showed quantum confinement effects in their optical spectra, with close to band-edge emission in luminescence experiments. The broad diffraction patterns observed are typical of nanodimensional particles. The variation of concentration of precursor-to-HDA ratio change the isolated materials from spheres to rod-shaped. TEM images showed agglomerates of needle-like plate of particles.     

Synthesis of N,N-di(arylmethylidene)arylmethanediamines by flash vacuum pyrolysis of arylmethylazides

Flash vacuum pyrolysis of arylmethylazides 7a-d gave 2,4-diazapentadienes 5a-d in high yield (76-92%). The thermal cyclization of 5a-d gave cis-imidazolines 1a-d, further heating or Swern oxidation of 1a-d gave dehydrogenated products, imidazoles 2a-d.     

N,N′,N″-Tri-Boc-guanidine (TBG): a common starting material for both N-alkyl guanidines and amidinoureas

In this Letter, we describe the unexpected reaction pattern of N,N′N″-tri-Boc-guanidine (TBG) with amines at room temperature and under reflux conditions affording N-substituted guanidines and amidinoureas, potentially important compounds with extensive applications in medicinal chemistry. This investigation shows that TBG is an excellent, readily available common starting material for the synthesis of various N-alkyl guanidines as well as N-alkyl-N′-substituted amidinoureas by simply manipulating the reaction conditions.     

Structure of N,C,N-chelated organotin(IV) fluorides

The set of starting tri-, di- and monoorganotin(IV) halides containing N,C,N-chelating ligand (L^NCN = {1,3-[(CH₃)₂NCH₂]₂C₆H₃}⁻) has been prepared (1-5) and two compounds structurally characterized ([L^NCNPh₂Sn]⁺I₃⁻ (1c), L^NCNSnBr₃ (5)) in the solid state. These compounds were reacted with KF with 18-crown-6, NH₄F or L^CNnBu₂SnF to give derivatives containing fluorine atom(s). Triorganotin(IV) fluorides L^NCNMe₂SnF (2a) and L^NCNnBu₂SnF (3a) revealed monomeric structural arrangement with covalent Sn-F bond both in the coordinating and non-coordinating solvents, except the behaviour of 3a that was ionized in the methanol solution at low temperature. The products of fluorination of L^NCNSnPhCl₂ (4) and 5 were described by NMR in solution as the ionic hypervalent fluorostannates or the oligomeric species reacting with chloroform, methanol or moisture to zwitterionic monomeric stannate L^NCN(H)⁺SnF₄⁻ (5c), which was confirmed by XRD analysis in the solid state.     

Radiation synthesis and characterization of poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) hydrogels

In this study, radiation synthesis and characterization of swelling behavior and network structure of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), and poly(N,N-dimethylaminoethyl methacrylate-co-N-vinyl 2-pyrrolidone) (P(DMAEMA-co-VP)), hydrogels were investigated. PDMAEMA and P(DMAEMA-co-VP) hydrogels in the rod forms were prepared by irradiating the ternary mixtures of DMAEMA/VP/cross-linking agent, ethyleneglycol dimethacrylate (EGDMA), by gamma rays at ambient temperature. In composition ranges where the three components were completely miscible, water was also added to the ternary mixture to provide the formation of homogeneous polymerization and gelation. The influence of irradiation dose, comonomer, VP, and cross-linking agent, EGDMA, content on the total percentage gelation and monomer conversion were investigated. The effect of pH and temperature on the swelling behavior of hydrogels have also been examined. Hydrogels showed typical pH response and temperature responses, such as low-pH and low temperature swelling and high-pH and high temperature deswelling. Polymer-solvent interaction parameter (χ) and enthalpy and entropy changes appearing in the χ parameter for the P(DMAEMA-co-VP)-water system were determined by using Flory-Rehner theory of swelling equilibrium. The negative values for ΔH and ΔS indicate that prepared pure PDMAEMA and P(DMAEMA-co-VP) hydrogels have lower critical solution temperature (LCST) and Flory-Rehner theory of swelling equilibrium provides a satisfactory agreement to the experimental swelling data of the hydrogels.     

N,N′-Bis(aryl)pyridine-2,6-dicarboxamide complexes of ruthenium: Synthesis,structure and redox properties

Reaction of five N,N′-bis(aryl)pyridine-2,6-dicarboxamides (H₂L-R, where H₂ denotes the two acidic protons and R (R = OCH₃, CH₃, H, Cl and NO₂) the para substituent in the aryl fragment) with [Ru(trpy)Cl₃](trpy = 2,2′,2″-terpyridine) in refluxing ethanol in the presence of a base (NEt₃) affords a group of complexes of the type [Ru^II(trpy)(L-R)], each of which contains an amide ligand coordinated to the metal center as a dianionic tridentate N,N,N-donor along with a terpyridine ligand. Structure of the [Ru^II(trpy)(L-Cl)] complex has been determined by X-ray crystallography. All the Ru(II) complexes are diamagnetic, and show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. Cyclic voltammetry on the [Ru^II(trpy)(L-R)] complexes shows a Ru(II)–Ru(III) oxidation within 0.16–0.33 V versus SCE. An oxidation of the coordinated amide ligand is also observed within 0.94–1.33 V versus SCE and a reduction of coordinated terpyridine ligand within −1.10 to −1.15 V versus SCE. Constant potential coulometric oxidation of the [Ru^II(trpy)(L-R)] complexes produces the corresponding [Ru^III(trpy)(L-R)]⁺ complexes, which have been isolated as the perchlorate salts. Structure of the [Ru^III(trpy)(L-CH₃)]ClO₄ complex has been determined by X-ray crystallography. All the Ru(III) complexes are one-electron paramagnetic, and show anisotropic ESR spectra at 77 K and intense LMCT transitions in the visible region. A weak ligand-field band has also been shown by all the [Ru^III(trpy)(L-R)]ClO₄ complexes near 1600 nm.     

Synthesis of homopolymers and multiblock copolymers by the living ring‐opening metathesis polymerization of norbornenes containing acetyl‐protected carbohydrates with well‐defined ruthenium and molybdenum initiators

The ring‐opening metathesis polymerization (ROMP) of norbornenes containing acetyl‐protected glucose [2,3,4,6‐tetra‐O‐acetyl‐glucos‐1‐O‐yl 5‐norbornene‐2‐carboxylate ( 1 )] and maltose [2,3,6,2′,3′,4′,6′‐hepta‐O‐acetyl‐maltos‐1‐O‐yl 5‐norbornene‐2‐carboxylate ( 2 )] was explored in the presence of Mo(N‐2,6‐ⁱPr₂C₆H₃)(CHCMe₂Ph)(O^tBu)₂ ( A ), Ru(CHPh)(Cl)₂(PCy₃)₂ ( B ; Cy = cyclohexyl), and Ru(CHPh)(Cl)₂(IMesH₂)(PCy₃) ( C ; IMesH₂ = 1,3‐dimesityl‐4,5‐dihydromidazol‐2‐ylidene). The polymerizations promoted by B and A proceeded in a living fashion with exclusive initiation efficiency, and the resultant polymers possessed number‐average molecular weights that were very close to those calculated on the basis of the monomer/initiator molar ratios and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.18) in all cases. The observed catalytic activity of B was strongly dependent on both the initial monomer concentration and the solvent employed, whereas the polymerization initiated with A was completed efficiently even at low initial monomer concentrations. The polymerization with C also took place efficiently, and even the polymerization with 1000 equiv of 1 was completed within 2 h. First‐order relationships between the propagation rates and the monomer concentrations were observed for all the polymerization runs, and the estimated rate constants at 25 °C increased in the following order: A > C > B . On the basis of these results, we concluded that ROMP with A was more suitable than ROMP with B or C for the efficient and precise preparation of polymers containing carbohydrates. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4248–4265, 2004     

Monodisperse and isolated microspheres of poly(N-methylaniline) prepared by dispersion polymerization

Monodisperse and isolated microspheres of poly(N-methylaniline) were successfully prepared through chemical polymerization of N-methylaniline by in adipic acid containing poly(vinylpyrrolidone) (PVP). Mean diameters of the microspheres with smooth surfaces changed from 320 to 100 nm by increasing the reaction temperature from 25 to 75 °C. The concentration of PVP did not affect much the size of microspheres, but the increased PVP concentration led to longer induction times for the onset of dispersion polymerization.     

Synthesis and structural characterization of novel ruthenium(II) complexes featuring an N,N,O-scorpionate ligand: A versatile synthetic precursor for open-face scorpionatoruthenium(II) complexes

The syntheses and characterization of novel ruthenium(II) complexes containing bis(3,5-dimethylpyrazol-1-yl)acetato (bdmpza), a new class of scorpionate ligands, are reported herein. [RuCl(bdmpza)(η⁴-1,5-cyclooctadiene)] (1) was found to be a versatile precursor to synthesize a wide range of new ruthenium(II) complexes with the bdmpza ligand. The treatment of 1 with pyridine (py), diphenylphosphinoethane (dppe), 2,2′-bipyridyl (bpy), 1,10-phenanethroline (phen), or bispicolylamine (Hbpica) in refluxing N,N-dimethylformamide resulted in displacement of the 1,5-cyclooctadiene ligand to afford [RuCl(bdmpza)(py)₂] (2), [RuCl(bdmpza)(dppe)] (3), [RuCl(bdmpza)(bpy)] (4), [RuCl(bdmpza)(phen)] (5), and [Ru(bdmpza)(Hbpica)]Cl (6Cl) in good yields, respectively. The structures of 1–4, and 6 were determined by X-ray structure analyses.     

Electrochemical fluorination of N,N-dimethylperfluoroacylamides

The electrochemical fluorination (ECF) of N,N-dimethylperfluoroacylamides gives the corresponding perfluoro-N,N-dimethylacylamides in low yield. With increase of the number of carbon atoms in the perfluoroacyl radical the yield of the required perfluoro-N,N-dimethylacylamides is slightly increased.     

N-Polyfluoro(trimethylsilyl)ethyl azole derivatives

A facile synthetic route to N-polyfluoro(trimethylsilyl)ethyl azole derivatives was developed starting from N-bromo(chloro)polyfluoroethyl-substituted azoles. The silanes thus obtained were reacted with various electrophiles in the presence of the fluoride ion to yield the corresponding fluorinated carbinols, ketones, carboxylic acids, and methyl dithiocarboxylates as well as N-pentafluoroethylbenzimidazole.     

Synthesis of well-defined norbornenyl-terminated poly(alkyl methacrylate)s by group transfer polymerization and their grafting-through ring-opening metathesis polymerization

Highly efficient syntheses of poly(alkyl methacrylate)-based brush polymers were accomplished via a facile group transfer polymerization (GTP) and a consecutive grafting-through ring-opening metathesis polymerization. The GTP system, composed of the norbornenyl-methyl trimethylsilyl ketene acetal initiator and the N-(trimethylsilyl) bis(trifluoromethanesulfonyl)imide catalyst, rapidly and quantitatively generates norbornenyl-terminated poly(alkyl methacrylate) macromonomers with very narrow polydispersities (M_w/M_n < 1.10). The ring-opening metathesis polymerization of methacrylate macromonomers using Grubbs third generation catalyst successfully generated a group of methacrylate-based brush polymers, which assured the high quality of the macromonomers obtained from GTP.     

Selective permeation of CO2 through poly 2-(N,N-dimethyl)aminoethyl methacrylate membrane prepared by plasma-graft polymerization technique

A membrane having an amine moiety was prepared by plasma-grafting 2-(N,N-dimethyl)aminoethyl methacrylate (DAMA) onto a microporous polyethylene substrate. Permselectivity of the membrane for CO₂ over N₂ was achieved in both dry and water swollen conditions. When the CO₂ partial pressure in the feed gas was 0.047 atm, the selectivity of CO₂ over N₂ reached 130 for the highly swollen water containing membrane. This value was found to agree with that obtained with a mobile carrier membrane (supported liquid membrane) using DAMA as the carrier. The effects of several experimental conditions such as degree of grafting, feed partial pressure and temperature on the membrane performance were studied. It was suggested that the membrane acted as a fixed carrier membrane for CO₂ facilitated transport in under the dry condition and acted as a fixed reaction site membrane in the water swollen condition. The carrier transport mechanism is discussed for dry and aqueous membranes.