Preparation of Iminoacetic Acid-type Composite Chelating Material IAA-PEI/SiO2 and Preliminary Studies on Chelating Adsorption Property towards Heavy Metal Ions

Polyamine polyethyleneimine (PEI) was first grafted on the surfaces of micro-sized silica gel particles in the manner of the coupling graft (the manner of “grafting to”), forming the grafting particles PEI/SiO₂. Subsequently, via a polymer reaction, the nucleophilic substitution reaction between the primary and secondary amino groups of the grafted PEI macromolecule and chloroactic acid (CAA), iminoacetic acid groups were bonded onto the grafted PEI chains, and an iminoacetic acid (IAA)-type composite chelating material, IAA-PEI/SiO₂, was formed. In this work, the preparation process of IAA-PEI/SiO₂ particles was mainly researched, and the effects of the main factors on the polymer reaction, i.e., the nucleophilic substitution reaction, were examined emphatically. The adsorption behavior of IAA-PEI/SiO₂ particles towards several kinds of heavy metal ions was preliminarily evaluated. The experiments results show that it is feasible to introduce IAA groups onto PEI/SiO₂ particles via the substitution reaction between CAA and the amino groups of the grafted PEI. The reaction rate is affected greatly by the feed ratio of the amino group of PEI to CAA, so the substitution reaction between CAA and the amino groups of the grafted PEI is a bimolecular nucleophilic substitution reaction (S_N2). The reaction temperature and the used amount of acid-acceptor NaHCO₃ affect the bonding rate of IAA groups greatly. The fitting temperature was 60°C, and 1:1 of the molar ratio of NaHCO₃ to CAA was an appropriate amount of acid-acceptor NaHCO₃. Under the above optimal reaction conditions and with 3:1 molar ratio of amino group of PEI to CAA, 72% of the IAA group bonding rate (it is based on the hydrogen atoms in the primary and secondary amino groups of the grafted PEI) in 8 h can be reached. The composite chelating material IAA-PEI/SiO₂ possesses a strong chelating adsorption ability for heavy metal ions because of the increase of the ligands and formation of stable five-membered chelate rings.     

Adenine and thymine grafts on polyethyleneimine

Graft polymers of three different molecular weights of polyethyleneimine (PEI) with 9-(vinylsulfonylethyl) (9-VSE)-adenine and 1-(vinylsulfonylethyl) (1-VSE)-thymine were prepared. PEI's having molecular weights of 600, 1200, and 1800 were used and various ratios of VSE-nucleobases to ethyleneimine were employed in the grafting process. As expected, a decrease in the nucleobase substitution in the resulting graft polymer resulted in an increase in its water solubility. The degree of substitution in the graft polymers was calculated from sulfur determinations: in most cases this degree of substitution indicated that not all of the VSE derivative has reacted with the PEI due to the highly branched nature of the latter. The presence of nucleobase stacking in the polymers was studied by UV spectroscopy. Stacking was observed for the adenine polymers in both DMSO and 0.1N HCl while stacking in the thymine polymers was observed in 0.1N HCl but not in DMSO. The absence of stackingwithin the thymine polymers in DMSO was attributed to complexation of primary amino groups of the PEI backbone with the pyrimidine ring.     

Carbazole substituted N-acylated linear polyethylenimines (PEI). synthesis and characterization of poly[N-(9-carbazolyl)acetylethylenimine] and poly[N-(2-(9-carbazolyl))propanoylethylenimine]

The synthesis of carbazola substituted N-acylated polyethylenimines, namely, poly[N-(9-carbazolyl)acetylethylenimine] 20 and poly[N-(2-(9-carbazolyl))propanoylethylenimine] 21 by a grafting reaction onto PEI and isomerization polymerization of the carbazole substituted 2-oxazolines is reported. A complete acylation of amino groups in PEI by the 9-carbazolylacetyl groups was achieved by the p-nitrophenyl active ester method but PEI was only partially N-acylated by the 2-(9-carbazolyl)propanoyl groups under similar reaction conditions. The carbazole substituted 2-oxazolines, namely, 2-(9-carbazolyl)methyl-2-oxazoline 18 and (R,S)-2-[1-(9-carbazolyl)]ethyl-2-oxazoline 19 , were prepared by a base induced cyclization of ß-chloroamides. The ring-opening isomerization polymerization of 18 and 19 in the molten state with a cationic initiator (dimethyl sulfate, methyl triflate, or ethylene glycol ditosylate) gave 20 and 21. Gel permeation chromatography of 20 and 21 obtained with different monomerto-initiator ratios gave evidence of a chain transfer reaction with the monomer. The polymers were characterized by elemental analyses, IR, and ¹H-NMR spectroscopy.     

The relationship between the compatibility and thermodegradation stability of modified polyetherimide/bismaleimide resins by hyperbranched polysiloxane with high degree of branching

Amino‐terminated hyperbranched polysiloxane (AHBSi) with high degree of branching (0.8) is used to improve the compatibilization of polyetherimide (PEI)/allyl bisphenol A modified bismaleimide (BD) blend. The relationship between the compatibility and thermal/thermal‐oxidative stability of the AHBSi/PEI/BD system is intensively investigated. Although PEI has high thermal stability, the PEI/BD blend has poorer thermal stability than BD resin due to the incompatibility. With the addition of AHBSi into the PEI/BD blend, AHBSi chemically connects PEI and BD, leading to the increased compatibility; moreover, interestingly, both thermal and thermo‐oxidative stabilities are significantly improved. Under a N₂ atmosphere, the addition of 0.5 wt% of AHBSi increases the initial degradation temperature of the PEI/BD blend from 395°C to 412°C. The thermodegradation kinetics were studied, and results show that the AHBSi/PEI/BD system has much higher activation energy of degradation in both N₂ and air atmospheres. The origin behind these interesting results is intensively investigated. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of poly(methyl methacrylate) core/chitosan-mixed-polyethyleneimine shell nanoparticles and their antibacterial property

The core–shell nanoparticles possessing poly(methyl methacrylate) (PMMA) core coated with chitosan (CS), polyethyleneimine (PEI), and chitosan-mixed-polyethyleneimine (CS/PEI) shells were synthesized in this work. The emulsifier-free emulsion polymerization triggered by a redox initiating system from t-butylhydroperoxide (TBHP) and amine groups on CS and/or PEI was used as a synthetic method. In the CS/PEI systems, the amount of CS was kept constant (0.5 g), while the amount of PEI was varied from 0.1 to 0.5 g. The surface and physico-chemical properties of prepared nanoparticles were then examined. FTIR spectra indicated the presence of grafted PMMA on CS and/or PEI, and the weight fraction of incorporated PEI in the CS/PEI nanoparticles. All nanoparticles were spherical in shape with uniform size distribution illustrated by scanning electron microscopy (SEM). The introduction of PEI to CS nanoparticles yielded the higher monomer conversion, grafting efficiency, and grafting percentage compared with the CS nanoparticles. The size of CS/PEI nanoparticles was smaller than the original CS and PEI nanoparticles, and tended to decrease with increasing amount of PEI introduced. The introduction of PEI also brought the higher colloidal stability to the nanoparticles as indicated by zeta-potential measurement and isoelectric point analysis. The nanoparticles exhibited a promising antibacterial activity against Staphylococcus aureus and Escherichia coli. The nanoparticle–bacteria interaction was studied via SEM. The results suggested that they would be useful as effective antibacterial agents.     

Vinylsulfonylethyl derivatives of nucleic acid bases and their graft polymers on polyethyleneimine

Vinylsulfonylethyl (VSE) derivatives of the nucleic acid bases adenine, thymine, cytosine, and the nucleosides inosine and uridine have been prepared via a simple Michael reaction with divinyl sulfone. The VSE derivatives were grafted on a polyethyleneimine (PEI) backbone. PEI of different molecular weights (1400, 1800 and 50,000–100,000) were used and also two different molar ratios (1:1 and 1:2) of monomer to PEI were employed. From the ¹H-NMR and elemental analysis, it appeared that in almost all instances the grafting was quantitative. In one case, both 1-VSE-thymine and 9-VSE-adenine were grafted on the same PEI backbone. Interactions between some of these polymers were investigated by UV spectroscopy. The expected complementary base pairing was observed only in DMSO–ethylene glycol solvent system but not in DMSO. The adenine polymer showed a one-to-one interaction with the thymine polymer.     

Polyethyleneimine/poly-(γ-glutamic acid)/poly(lactide-co-glycolide) nanoparticles for loading and releasing antiretroviral drug

Nanoparticles (NPs) with ternary components of polyethyleneimine (PEI), poly-(γ-glutamic acid) (γ-PGA), and poly(lactide-co-glycolide) (PLGA) were applied to carry and release saquinavir (SQV). Hydrophobic SQV was encapsulated in the particle core composed of PLGA to form SQV-PLGA NPs, and the surface of SQV-PLGA NPs was grafted successively with hydrophilic γ-PGA and PEI (PEI/γ-PGA/SQV-PLGA NPs). The morphological images revealed that PEI/γ-PGA/SQV-PLGA NPs were spheroid-like, in general. An increase in the concentration of didecyl dimethylammonium bromide and a reduction in the dose of SQV enhanced the entrapment efficiency of SQV in PLGA NPs. In addition, an increment in the molecular weight of γ-PGA reduced the grafting efficiency of PEI on γ-PGA/SQV-PLGA NPs. An increase in the weight percentage of PEI enhanced the average particle diameter. However, the grafting efficiency of PEI on γ-PGA/SQV-PLGA NPs and the dissolution rate of SQV from PEI/γ-PGA/SQV-PLGA NPs reduced when the weight percentage of PEI increased. PEI/γ-PGA/SQV-PLGA NPs are an innovative drug delivery system and can be used for antiretroviral trials.     

A highly thermal-resistant electrospun-based polyetherimide nanofibers coating for solid-phase microextraction

A high-temperature-resistant solid-phase microextraction (SPME) fiber was prepared based on polyetherimide (PEI) by the electrospinning method. The PEI polymeric solution was converted to nanofibers using high voltages and directly coated on a stainless steel SPME needle. The scanning electron microscopy images of PEI coating showed fibers with diameter range of 500–650 nm with a homogeneous and smooth surface morphology. The SPME nanofibers coating was optimized for PEI percentage, electrospinning voltage, and time. The extraction efficiency of the coating was investigated for headspace SPME of some environmentally important polycyclic aromatic hydrocarbons from aqueous samples followed by gas chromatography–mass spectrometry measurement. In addition, the important extraction parameters including extraction temperature, extraction time, ionic strength, as well as desorption temperature and time were investigated and optimized. The detection limits of the method under optimized conditions ranged from 1 to 5 ng L^?1 using time-scheduled selected ion monitoring mode. The relative standard deviations of the method were between 1.1 and 7.1 %, at a concentration level of 500 ng L^?1. The calibration curves of polycyclic aromatic hydrocarbons showed linearity in the range of 5–1000 ng L^?1. The developed method was successfully applied to real water samples and the relative recovery percentages obtained from the spiked water samples were from 84 to 98 % for all the selected analytes except for acenaphthene which was from 75 to 106 %.     

硅胶接枝新型长链季铵盐抗菌材料制备及其抗菌性能

硅胶接枝季铵盐;水不溶抗菌材料;聚乙烯亚胺;抗菌机理     

Morphology and properties of semi-IPNs of polyetherimide and bisphenol A dicyanate

Semi-interpenetrating polymer networks (semi-IPNs) were synthesized from mixtures of polyetherimide (PEI) and bisphenol A dicyanate (BPACY) at different compositions and different cure temperatures. The phase separation behavior during cure was analyzed in terms of glass transtion temperature (T_g) behavior of fully cured semi-IPNs and the morphology–property relationship was also studied. The mixtures of PEI and BPACY monomer showed upper critical solution temperature behavior and their semi-IPNs showed sea-island morphology in 1–14 wt% PEI composition, dual-phase morphology in 15–19 wt% PEI composition and nodular morphology in 20–60 wt% PEI composition, respectively. The sea-island morphology was formed via nucleation and growth, while the other morphologies were predominantly formed via spinodal decomposition. Cure temperature did not influence the macroscopic morphology, but the domain size changed with temperature. As cure temperature was increased, the PEI domain size in the sea-island morphology decreased, while the BPACY nodule size increased in the nodular morphology. Mechanical and thermal properties were so strongly dependent upon the morphology that they changed dramatically near the phase inversion point.     

Dilatometric studies of physical aging of polyetherimide

Physical aging of polyetherimide (PEI) was studied using a bellows dilatometer based on Zoller's design. A linear variable differential transformer (LVDT) is used to measure the displacement of the bellows. The voltage output of the LVDT is interfaced to a computer for automated data collection. Isothermal aging experiments were carried out at temperatures near the glass temperature (206–209 C) using a constant temperature oil bath maintained at the desired aging temperature. The time required to reach equilibrium and the reduced curve produced by aging time-temperature superposition are given. The results compare well with data obtained by capillary dilatometry for the same material.     

Electrical properties of sulfonated polyether ether ketone/polyetherimide blend membranes doped with inorganic acids

The influence of blending with polyetherimide (PEI) and doping with HCl and H₃PO₄ on the properties of sulfonated polyether ether ketone (SPEEK) was studied. Blending with PEI first results in an increase and then in a decrease in membrane swelling at PEI concentrations greater than 5%. The electrical conductivity of blend membranes follows the same trend. Doping with the acids enhances the conductivity several times, and the effect of doping with HCl is more significant. PEI forms spherical particles dispersed in the SPEEK matrix and, at the same time, partially dissolves in SPEEK, which reduces the swelling of the matrix at higher PEI concentrations. The increase in the membrane capacity to absorb water at small PEI contents is due to the formation of new water adsorption sites along the interface between the particles and the matrix. A modified effective medium model yielded calculated results in good agreement with the measured conductivity values, when the experimental absorption data were used in the simulation. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1386–1395, 2000     

Miscible blends of nitro‐substituted polybenzimidazole and polyetherimide

A novel blend system was prepared by blending organosoluble nitro‐substituted polybenzimidazole (NO₂‐PBI) and polyetherimide (PEI) in a cosolvent at a moderate condition. It was shown that the NO₂‐PBI/PEI blends not only possess tractable processability owing to the enhanced solubility of NO₂‐PBI but also retain the desirable features of unmodified PBI/PEI blends. Apparent miscibility in the blends was observed and attributed to hydrogen‐bonding interactions between N? H groups in NO₂‐PBI and carbonyl groups in PEI. It was revealed that the NO₂‐PBI/PEI blends phase‐separate upon heating above the glass‐transition temperatures. The observed mixing of NO₂‐PBI and PEI in a molecular level, although sustainable only in the glassy region, was shown to lend synergy effects to the physical properties of the blends. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1778–1783, 2001     

Recent developments in polyetherimide membrane for gas separation

Polyetherimide (PEI) is an extraordinary type of polyimide with excellent thermal and mechanical properties. The polymer is also gas permeable and is considered one of the best membranes for gas separation. Despite the high selectivity, PEI suffers from low permeability due to the trade‐off between phenomena in polymers. To overcome this limitation, fillers are added during the membrane preparation to create voids for better gas transport. In this paper, permeability and selectivity data of PEI membranes for the separation of oxygen, carbon dioxide, and helium are discussed. The paper also summarizes the reported studies for adding fillers to improve the membrane performance.     

The addition of functionalized graphene oxide to polyetherimide to improve its thermal conductivity and mechanical properties

The thermal and electrical conductivity and mechanical properties of polyetherimide (PEI) containing either alkyl‐aminated (enGO) or phenyl‐aminated graphene (pnGO) oxides were studied. A solution casting method was used to prepare functionalized graphene oxide/PEI composites with different filler contents. The introduction of functionalized graphene oxide to the PEI matrix improved the thermal conductivity, electrical conductivity, and mechanical properties. The thermal conductivities of the enGO 3 wt%/PEI and pnGO 3 wt%/PEI composites were 0.324 W/mK and 0.329 W/mK, respectively, due to the high thermal conductivity of the graphene‐based materials and the strong interface adhesion due to the filler surface treatment between the fillers and the matrix. The electrical conductivities of the functionalized graphene oxide/PEI composites were larger than that of PEI, but the electrical conductivity values were generally low, which is consistent with the magnitude of the insulator. The strong interfacial adhesion between the fillers and the matrix led to improved mechanical properties. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation of a blocked isocyanate compound and its grafting onto styrene-b-(ethylene-co-1-butene)-b-styrene triblock copolymer

The ε-caprolactam was used to block the isocyanate group to enhance the storage stability of allyl (3-isocyanate-4-tolyl) carbamate. The spectra of FTIR and NMR showed that blocked allyl (3-isocyanate-4-tolyl) carbamate (BTAI) possesses two chemical functions, an 1-olefin double bond and a blocked isocyanate group. The FTIR spectrum showed BTAI could regenerate isocyanate group at elevated temperature. DSC and TG/DTA indicated the minimal dissociation temperature was about 135 °C and the maximal dissociation rate appeared at 226 °C. Then the styrene-b-(ethylene-co-1-butene)-b-styrene triblock copolymer (SEBS) was functionalized by BTAI via melt free radical grafting. The effect of temperature, monomer and initiator concentrations on the grafting degree and grafting efficiency was evaluated. The highest grafting degree was obtained at 200 °C. The grafting degree and grafting efficiency increased with the enhanced concentration of BTAI or initiator. The weight-average molecular weight (M_w) increased greatly at higher initiator concentration and lower ratio of the monomer/initiator. And the molecule weight distribution (MWD) of the modified SEBS became wider than that of pure SEBS. It is obvious that shearing thinning behavior of grafted SEBS is more profound than pure SEBS.     

Some physico-chemical properties and sorption ability of benzylated polyethyleneimines in aqueous solutions

An investigation has been made on the change in the physico-chemical properties of aqueous solutions of branched and linear polyethyleneimine (a high mol. wt catalyst for hydrolysis of nitrophenyl esters) occurring on its being alkylated by benzyl chloride. The first result of alkylation is benzyldiethylamine fragments in PEI. Provided that the degree of conversion is below 0–3, the reaction is second order. Then the rate constant decreases, probably due to a decrease in the steric factor. Alkylation diminishes pK_a's of nitrogen atoms of PEI. Accumulation of benzyl groups in PEI results in a marked contraction of its macromolecules in aqueous solutions and enhances the sorption ability with respect to n-nitroanilides. The free energy of sorption is ?4 · 1 to ? 5·5 kcal/mole.     

Preparation of Latexes with Poly(Methyl Methacrylate) Cores and Hydrophilic Polymer Shells Containing Amino Groups

Abstract

Functional latexes with poly(methyl methacrylate) (PMMA) cores and amino‐containing, water‐soluble polymer shells were synthesized via direct graft copolymerization of methyl methacrylate from water‐soluble polymers induced by a small amount of tert‐butyl hydroperoxide (TBHP) at 80°C for 2 h. Amphiphilic graft copolymers and PMMA homopolymers were generated concurrently to form highly monodispersed latexes. The effects of water‐soluble polymer containing different amino group, reaction temperature, TBHP concentration, molecular weight of the polymer and pH of the solution on conversion and grafting efficiency of the monomer and particle size were investigated. Transmission electron microscopic images of the PMMA/poly(ethyleneimine) (PEI) and PMMA/poly(allylamine) (PAA) particles clearly show well‐defined core‐shell morphologies, where PMMA cores are coated with either PEI or PAA shell. The amino‐containing polymer shells were also confirmed with zeta‐potential measurements. Furthermore, the amino‐containing latexes can be produced with a solids content up to 22 wt.%. Thus, this method provides a commercially viable route to functional latexes.     

Surface modification of cellulose nanocrystal with chitosan oligosaccharide for drug delivery applications

A novel drug delivery system based on two of the most abundant natural biopolymers was developed by modifying the surface of oxidized cellulose nanocrystal (CNC) with chitosan oligosaccharide (CS_OS). First, the primary alcohol moieties of CNC were selectively oxidized to carboxyl groups using the 2,2,6,6-tetramethylpiperidine-1-oxyl radical catalyst. The amino groups of CS_OS were then reacted with carboxylic acid groups on oxidized CNC (CNC-OX) via the carbodiimide reaction using N-hydroxysuccinimide and 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide as coupling agents. Successful grafting of CS_OS to CNC-OX was confirmed by infrared spectroscopy, thermogravimetry, potentiometric titration, and zeta potential measurements. The grafting resulted in a conversion of ~90 % carboxyl groups on CNC-OX and the degree of substitution was 0.26. CNC–CS_OS nanoparticles showed a binding efficiency of 21.5 % and a drug loading of 14 % w/w. A drug selective electrode was used to directly measure the concentration of procaine hydrochloride released from CNC–CS_OS particles. The in vitro drug release was studied at pH 8 and the nanoparticles revealed a fast release of up to 1 h, which can be used as biocompatible and biodegradable drug carriers for transdermal delivery applications.     

Surfactant dispersed multi-walled carbon nanotube/polyetherimide nanocomposite membrane

Carbon nanotube based nanocomposite membranes have been fabricated through solution casting by embedding multi-walled carbon nanotubes (MWCNTs) within polyetherimide (PEI) polymer host matrix. In order to achieve fine dispersion of nanotubes and facilitate strong interfacial adhesion with the polymer matrix, the nanotubes were first treated with surfactants of different charges, namely anionic sodium dodecyl chloride, cationic cetyl trimethyl ammonium chloride and non-ionic Triton X100, prior to the dispersion in the PEI dope solution. Dispersion of MWCNTs in N-methyl-2-pyrrolidone solvent showed that the agglomeration and entanglement of the nanotubes were greatly reduced upon the addition of Triton X100. Scanning electron microscopy and atomic force microscopy examination has evidenced the compatibility of Triton X100 dispersed MWCNTs with the polymer matrix in which a promising dispersion and adhesion has been observed at the MWCNT-PEI interface. The increase in both thermal stability and mechanical strength of the resulting Triton X100 dispersed MWCNT/PEI nanocomposite indicated the improved interaction between MWCNTs and PEI. This study demonstrated the role of Triton X100 in facilitating the synergetic effects of MWCNTs and PEI where the resulting composite membrane is anticipated to have potential application in membrane based gas separation.