纳米级固定化猪胰脂肪酶催化三亚甲基碳酸酯的开环聚合研究

以纳米级固定化猪胰脂肪酶(IMPPL)催化三亚甲基碳酸酯(TMC)的开环聚合,研究了IMPPL浓度、聚合反应温度和聚合反应时间对聚三亚甲基碳酸酯(PTMC)分子量和产率的影响.同时也研究了回收再利用的IMPPL对TMC开环聚合的催化作用以及IMPPL对PTMC的降解作用.实验结果表明,IMPPL不仅在60～100℃能有效地催化TMC的开环聚合,而且在较高的温度下IMPPL可以有效地催化PTMC的降解.回收使用的固定化酶可表现较高的催化活性及重复利用性.     

Synthesis of functional polycarbonates by lipase-catalyzed ring-opening polymerization

Poly(5-benzyloxy-trimethylene carbonate) (PBTMC), a new functional polycarbonate was synthesized by enzymatic ring-opening polymerization in bulk at 150°C using Porcine pancreas lipase (PPL) or Candida rugosa lipase (CL) as catalyst. Influences of different polymerization conditions such as the source of enzyme, enzyme concentration and polymerization time on the molecular weight and yield were studied. The results showed that PPL exhibited higher activity than CL. Both higher molecular weight(Mn, 18953) and yield(98%) could be obtained by the use of PPL as catalyst. ¹H NMR spectrum showed no decarboxylation occurrence during the ring-opening polymerization.     

SYNTHESIS OF POLY(5,5-DIMETHYL-1,3-DIOXAN-2-ONE)BY LIPASE-CATALYZED RING-OPENING POLYMERIZATION

Porcine pancreas lipase (PPL) and PPL immobilized on narrow distributed micron-sized glass beads wereemployed successfully for the ring-opening polymerization of 5, 5-dimethyl-1, 3-dioxan-2-one (DTC) for the first time.Different polymerization conditions such as enzyme concentration and reaction temperature were studied. Immobilized PPLexhibits higher activity than native PPL. Along wth the increasing enzyme concentration, the molecular weigh of resultingPDTC decreases. PPL immobilized on narrow distributed micron-sized glass beads has outstanding recyclability. For thethird recycle time, immobilized PPL exhibits the highest catalytic activity and with high activity even after the fifth recyletime for the synthesis of PDTC. The ~1H-NMR spectra indicate that decarboxylation does not occur during the ring-openingpolymerization.     

聚ε-己内酯的微米硅球固定化猪胰脂肪酶促合成

本文采用微米硅球固定化猪胰脂肪酶为催化剂合成聚ε-己内酯, 以期获得具有较高分子量、 良好生物相容性和使用安全性的生物可降解医用高分子材料.     

大环碳酸酯的Novozym-435酶促开环聚合

研究了14元环的碳酸丁二酯二聚体在固定化脂肪酶Novozym-435催化下的开环聚合反应制备聚碳酸丁二酯.聚合在常压,75℃的甲苯溶液中进行,反应条件温和.详细探讨了反应条件诸如单体浓度,酶浓度对于聚合的影响.结果显示Novozym-435具有与异辛酸亚锡可比拟的高催化活性,同时可以回收重复使用.聚合动力学研究表明碳酸丁二酯的酶促甲苯溶液开环聚合和环状内酯的酶促甲苯溶液聚合有所不同,没有表现出活性聚合的特征.     

Enzyme-catalyzed ring-opening polymerization of ethylene isopropyl phosphate

Enzyme-catalyzed ring-opening polymerization of a cyclic phosphate (ethylene isopropyl phosphate) was achieved in bulk by using porcine pancreas lipase (PPL) as a catalyst. It was found that the higher the polymerization temperature and lipase concentration, the faster is the polymerization rate. The yield is not very sensitive to the lipase concentration, while the molecular weight decreases with increasing lipase concentration. From ¹³C and ¹H NMR analysis, the polymer has a phosphoric acid group at one end and a hydroxyl group at the other. The ³¹P{¹H} NMR spectrum indicated that some chain transfer might take place in the polymerization.     

Lipase‐catalyzed ring‐opening polymerization of 6(S)‐methyl‐morpholine‐2,5‐dione

Lipase‐catalyzed ring‐opening bulk polymerizations of 6(S)‐methyl‐morpholine‐2,5‐dione (MMD) were investigated. Selected commercial lipases were screened as catalysts for MMD polymerization at 100 °C. Polymerizations catalyzed with 10 wt % porcine pancreatic lipase type II crude (PPL), lipase from Pseudomonas cepacia, and lipase type VII from Candida rugosa resulted in MMD conversions of about 75% in 3 days and in molecular weights ranging from 8200 to 12,100. Poly(6‐methyl‐morpholine‐2,5‐dione) [poly(MMD)] had a carboxylic acid group at one end and a hydroxyl group at the other end. However, lipase from Mucor javanicus showed lower catalytic activity for the polymerization. During the polymerization, racemization of the lactate residue took place. PPL was selected for further studies. The rate of polymerization increased with increasing PPL concentration under otherwise identical conditions. When the PPL concentration was 5 or 10 wt % with respect to MMD, a conversion of about 70% was reached after 6 days or 1 day, respectively, whereas for a PPL concentration of 1 wt %, the conversion was less than 20% even after 6 days. High concentrations of PPL (10 wt %) resulted in high number‐average molecular weights (<3 days); with a lower concentration of PPL, lower molecular weight poly(MMD) was obtained. The concentration of water was an important factor that controlled not only the conversion but also the molecular weight. With increasing water content, enhanced polymerization rates were achieved, whereas the molecular weight of poly(MMD) decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3030–3039, 2005     

Polyesters from Macrolactones Using Commercial Lipase NS 88011 and Novozym 435 as Biocatalysts

The demand for environmentally friendly products allied with the depletion of natural resources has increased the search for sustainable materials in chemical and pharmaceutical industries. Polyesters are among the most widely used biodegradable polymers in biomedical applications. In this work, aliphatic polyesters (from globalide and ω-pentadecalactone) were synthesized using a new commercial biocatalyst, the low-cost immobilized NS 88011 lipase (lipase B from Candida antarctica immobilized on a hydrophobic support). Results were compared with those obtained under the same conditions using a traditional, but more expensive, commercial biocatalyst, Novozym 435 (lipase B from C. antarctica immobilized on Lewatit VP OC). When NS 88011 was used in the polymerization of globalide, longer reaction times (240 min)—when compared to Novozym 435—were required to obtain high yields (80–90 wt%). However, higher molecular weights were achieved. When poly(ω-pentadecalactone) was synthesized, high yields and molecular weights (130,000 g mol^?1) were obtained and the enzyme concentration showed strong influence on the polyester properties. This is the first report describing NS 88011 in polymer synthesis. The use of this cheaper enzymatic preparation can provide an alternative for polyester synthesis via enzymatic ring-opening polymerization.     

Porcine Pancreas Lipase Catalyzed Ring‐Opening Polymerization of ϵ‐Caprolactone

Abstract

Extensive studies on lipase catalyzed polymerization of ?‐caprolactone showed that porcine pancreas lipase (PPL) gave good conversions and molecular weights of the order of 11,000. Various attempts were also made to prepare higher molecular weight polycaprolactone esters and to increase the molecular weights of polycaprolactone esters by further polymerizing it in the presence of other potent bifunctional monomers. Blends of enzymatically prepared polycaprolactone ester with polystyrene and cellulose acetate yielded very good films, which were characterized in terms of tensile strength, elongation, and optical properties.     

环状磷酸酯的酶促开环聚合

研究了环状磷酸酯的酶促开环聚合反应,讨论了环状磷酸酯取代烷基对于酶促开环聚合及相应聚磷酸酯性能的影响,发现烷基取代基长度对于聚合度没有明显影响; 但随着环状磷酸酯的取代基长度增加,产率随之降低,聚磷酸酯的亲脂性增强. 猪胰脂肪酶和假丝酵母皱褶酶显示出比碱性磷脂酶更高的活性.     

猪胰脂肪酶的固定化及其在有机相中催化丁酸甲酯和正丁醇的酯交换反应研究

考察了大孔苯乙烯－二乙烯苯交联共聚物的交联度、致孔剂量及胺化试剂对载体固定化猪胰脂肪酶的影响。选择出一种最佳载体对猪胰脂肪酶进行固定化，对比了自由酶和固定化酶在有机相中催化丁酸甲酯和正丁醇的酯交换反应。结果表明，酶经固定化后催化反应活力比自由酶提高近１倍。     

Synthesis and chemical recycling of novel poly(ester-urethane)s using an enzyme

A series of enzymatically recyclable poly(ester-urethane)s consisting of a biodegradable diurethane moiety as a hard segment and an ester moiety as an enzymatically cleavable linkage was chemo-enzymatically prepared by two routes. The poly(ester-urethane) was prepared by a) the ring-opening polymerization of a cyclic ester-urethane monomer synthesized via the transesterification reaction of biodegradable diurethanediol and dicarboxylate ester using lipase and b) the direct polycondensation of a diurethanediol and a dicarboxylate ester. A significantly higher molecular-weight poly(ester-urethane) having the highest molecular weight (Mw) of 101,000 was produced by the ring-opening polymerization of the cyclic ester-urethane monomer when compared with that produced by the polycondensation of the dicarboxylate ester with diurethanediol. The poly(ester-urethane) was readily degraded by lipase into the corresponding cyclic oligomers; the oligomers were readily repolymerized by the ring-opening polymerization using lipase for chemical recycling.     

Enzymatic polyesterification in organic media. Enzyme-catalyzed synthesis of linear polyesters. I. Condensation polymerization of linear hydroxyesters. II. Ring-opening polymerization of ϵ-caprolactone

With the object to synthesize polyesters by enzymatic catalysis in organic media, two directions have been investigated: (1) the condensation polymerization of linear ω-hydroxyesters and (2) the ring-opening polymerization of lactones. The commercially-available crude porcine pancreatic lipase (PPL), suspended in organic solvents, was the preferred enzyme for the reactions. In order to determine the optimal conditions for the condensation polymerization, the bifunctional methyl 6-hydroxyhexanoate was used as a model compound to study the influence of the following parameters: type of the enzymecatalyst, kind of solvent, concentration, temperature, duration, size of the reaction mixture, and stirring. Film-forming polyesters with a degree of polymerization (DP) up to about 100 were obtained from linear aliphatic hydroxyesters in n-hexane at reflux temperature (69°C). Yet concurrently with the intermolecular condensation polymerization, macrolactones were also formed by intramolecular reaction. Two aromatic hydroxyesters did not react under these conditions. For the ring-opening polymerization of lactones the reaction of ?-caprolactone with methanol as the preferred nucleophile, was studied. Polyesters with a DP of up to 35 were obtained in n-hexane at temperatures between 25 and 40°C. The degrees of polymerization of the polyesters were determined by comparative analyses of the end groups in the ¹H-NMR spectra and by determination of molecular weights either by vapor phase osmometry, gel permeation chromatography, or intrinsic viscosity. © 1993 John Wiley & Sons, Inc.     

Enzymatic ring-opening copolymerization of trimethylene carbonate and ethylene ethyl phosphate

A growing interest in biodegradable polymers and their biomedical and pharmaceutical applications has developed since the past decade. Ring-opening polymerization has been regarded as an efficient route for the synthesis of the biodegradable polymers, such as polyester, polycar- bonates and polyphosphates[1—6]. However, chemical methods for the ring-opening polymerization of biodegradable polymers need extremely pure monomers and anhydrous conditions as well as metallic catalysts, which must …     

Lipase‐Catalyzed Ring‐Opening Polymerization of 3(S)‐sec‐Butylmorpholine‐2,5‐dione

Lipase‐catalyzed ring‐opening bulk polymerizations of 3(S)‐sec‐butylmorpholine‐2,5‐dione (BMD) were investigated. Selected commercial lipases were screened as catalysts for BMD polymerization at 110°C. Polymerizations catalyzed with 10 wt.‐% of lipase PPL and PC result in BMD conversions of about 70% and in molecular weights of the products ranging from 5 500 to 10 700. Lipases MJ, CR and ES showed lower catalytic activities for the polymerization of BMD. Poly(3‐sec‐butylmorpholine‐2,5‐dione) has a carboxylic acid group at one end and a hydroxy group at the other end. During the polymerization racemization of the isoleucine residue takes place. Lipase PPL was selected for a more detailed study. The apparent rate of polymerization increases with increasing PPL concentration when the polymerization temperature is 110°C. When the PPL concentration is 5 and 10 wt.‐% with respect to the monomer, a conversion of about 70% is reached after 5 d and 3 d, respectively, while for a PPL concentration of 1 wt.‐% the conversion is less than 7% even after 6  d. High concentrations of PPL (10 wt.‐%) result in high M_n values (< 4  d). The highest molecular weight poly(BMD), M_n = 19 900, resulted from a polymerization conducted at 120°C with 5 wt.‐% PPL for 6 d. The general trend observed by varying the polymerization temperature is as follows: (i) monomer conversion and M_n increase with increasing reaction temperature from 110 to 125°C, (ii) monomer conversion and M_n decrease with an increase in reaction temperature from 125 to 130°C. Water content was found to be an important factor that controls both the conversion and the molecular weight. With increasing water content, enhanced polymerization rates are achieved while the molecular weight of poly(BMD) decreases.     

一种含有氯乙氧功能基团的环状磷酸酯的酶促开环聚合

作为生物体内广泛存在的一类高分子——聚磷酸酯以其良好的生物相容性、生物可降解性及低毒性,一直受到人们的广泛关注．尤其是一些含有功能基团的聚磷酸酯,在基因转染、药物控制释放和组织工程等领域具有很好的应用前景．聚磷酸酯可通过金属催化剂开环聚合制备而成,但残留的微量金属催化剂可能会给材料带来潜在毒性．     

单分散磁性纳米粒子固定化猪胰脂肪酶的研究

借助溶热法制备了一种亲水及生物相容良好的Fe3O4磁性纳米粒子,用γ-氨丙基三乙氧基硅烷直接对所得磁性粒子表面改性,然后用戊二醛偶联法制得了固定化猪胰脂肪酶.表征研究显示,所得磁性粒子粒径约200 nm,具有良好的单分散性和磁响应性.考察了戊二醛浓度、给酶量和反应时间对脂肪酶固定化过程的影响,并通过游离酶与固定化酶的比...     

Lipase-catalyzed ring-opening polymerization of lactide

The six-membered lactide was polymerized using the ring-opening polymerization with lipase as a catalyst at a temperature between 80 and 130°C in bulk to yield the corresponding polylactide with weight-average molecular weights of up to 126000. The most preferable conditions with respect to the molecular weight of the polylactide are the bulk polymerization using lipase PS at a temperature of 100°C. The D ,L -lactide gave higher molecular weight compared to the D ,D - and L ,L -lactide.     

改性Ultrastable-Y分子筛固定化对非水相中脂肪酶拆分(R,S)-2-辛醇的影响

采用改性Ultrastable-Y分子筛固定Penicillium expansum PED-03 脂肪酶(PEL), 利用固定化PEL在非水相中对(R,S)-2-辛醇进行手性拆分, 考察了改性Ultrastable-Y分子筛固定化处理对PEL催化性能的影响. 结果表明, 与游离PEL及经其它载体固定化的PEL相比, 改性Ultrastable-Y分子筛固定的PEL所催化的拆分反应的转化率(c)和对映体过量值(ee)以及对映体选择性(E)均得到了较大提高. 经固定化处理后, PEL的最适反应温度明显升高, 适宜反应温度范围变宽, 其稳定性也得到了明显改善, 而适宜反应pH值则具有“记忆”性. 在间歇式反应器中利用Ultrastable-Y分子筛固定化PEL对(R,S)-2-辛醇进行手性拆分, 50 ℃反应24 h转化率(c)可达理论值的97.68%, 对映体过量值(ee)可达98.75%. 连续8批拆分反应的结果表明: 改性Ultrastable-Y分子筛固定化脂肪酶催化效率高、立体选择性强(平均E 值＞460), 且催化性能稳定, 显示了该固定化酶在(R,S)-2-辛醇的手性拆分方面具有良好的应用前景.     

Investigation on lipase-catalyzed solution polymerization of cyclic carbonate

In this study, 26-membered macrocyclic carbonate, cyclobis(decamethylene carbonate) [(DMC)₂] was attempted to undergo ring-opening polymerization by lipase catalysis in toluene. Novozym-435 exhibited even higher catalytic activity towards (DMC)₂ polymerization compared with SnOCt₂ while high molecular weight (M_n) of 5.4 × 10⁴ and yield of 99% was still achieved at ultra-low enzyme/substrate (E/S) weight ratio of 1/200. ¹H NMR spectra demonstrated the existence of terminal hydroxyl group. Solid phase polymerization in the absence of toluene unexpectedly took place at the temperature lower than (DMC)₂’s melting point of 110 °C. Compared with solvent-free case, the addition of toluene solvent resulted in marked increase in reaction rate. As to the polymerization during 48 h with the E/S weight ratio of 1/100, a region existed at around toluene/carbonate (vol/wt, ml/g) ratio of 1∼2 where the polymerizations gave optimal results in terms of both higher molecular weight and monomer conversion. It was found that much higher molecular weight polymers may be obtained by decreasing enzyme concentrations. Plots of ln{[M]₀:[M]_t} versus reaction time were in linear agreement, indicating no chain termination, and monomer consumption follows a first-order rate law. The Novozym-435 catalyzed polymerization of (DMC)₂ in toluene presented pseudo-living characteristic. Compared with 6-membered trimethylene carbonate, much lower reaction activity of large-sized (DMC)₂ is observed, which is opposite to the result concerning the enzymatic polymerization of lactones with different ring-size.