Ring-opening polymerization of ε-caprolactone using rare earth tris(4-tert-butylphenolate)s as a single component initiator

Ring-opening polymerization of ε-caprolactone has been carried out by using single component rare earth tris(4-tert-butylphenolate)s initiators for the first time. The influences of rare earth element, solvent, monomer and initiator concentration as well as reaction time on the polymerization were investigated. The kinetics indicated that the polymerization rate is first-order with respect to monomer concentration and initiator concentration, respectively. The overall activation energy of the ring-opening polymerization amounts to 51.9 kJ/mol. Mechanism studies showed that monomer inserted into the growing chains with the acyl-oxygen bond scission rather than the break of alkyl-oxygen bond.     

RING-OPENING POLYMERIZATION OF 1,4-DIOXAN-2-ONE INITIATED BY LANTHANUM TRIS（ 2,6-DI-TERT-BUTYL-4-METHYLPHENOLATE）

The ring-opening polymerization of 1,4-dioxan-2-one （PDO） was carried out by lanthanum tris（2,6-di-tert-butyl-4- methylphenolate） （La（OAr）3） as novel single component initiaLor. The influences of polymerization reaction temperature and the molar ratio of monomer to initiator on the monomer conversion and molecular weight of poly（1,4-dioxan-2-one） （PPDO） were explored. PPDO with high viscosity average molecular weight of 1.95×10^5 can be prepared at 40℃ when [PDO]/ [La（OAr）3] molar ratio was 800. Mechanism investigation shows that the polymerization proceeds through a ＂coordination- insertion＂ mechanism with selective rupture of acyl-oxygen be,nd of PDO.     

RING-OPENING POLYMERIZATION OF l,4-DIOXAN-2-ONE INITIATED BY LANTHANUM TRIS(2,6-DI-TERT-BUTYL-4-METHYLPHENOLATE)

The ring-opening polymerization of 1,4-dioxan-2-one (PDO) was carried out by lanthanum tris(2,6-di-tert-butyl-4-methylphenolate) (La(OAr)3) as novel single component initiator. The influences of polymerization reaction temperature and the molar ratio of monomer to initiator on the monomer conversion and molecular weight of poly(1,4-dioxan-2-one) (PPDO) were explored. PPDO with high viscosity average molecular weight of 1.95×105 can be prepared at 40℃when [PDO]/ [La(OAr)3] molar ratio was 800. Mechanism investigation shows that the polymerization proceeds through a "coordinationinsertion" mechanism with selective rupture of acyl-oxygen bond of PDO.     

Polymerization of n-Hexyl Isocyanate Initiated by Novel Rare Earth Tris （2,6-di-tert-butyl-4-methylphenolate）

The polymerization of n-hexyl isocyanate (HNCO) was carried out in the presence of a novel single initiator, rare earth tris (2,6-di-tert-butyl-4-methylphenolate) [Ln(OAr)3]. The influences of reaction conditions such as the monomer concentration, the polymerization temperature and time, and the types of solvents on the polymerization of HNCO were studied. Polymerizations of phenyl, i-propyl, p-tolyl, n-butyl and n-octyl isocyanates with La(OAr)3 were also examined.     

Thermal decomposition of 2,6-di-tert-butyl-4-dimethylaminomethylphenol

Products of thermolysis of 2,6-di-tert-butyl-4-dimethylaminomethylphenol were determined qualitatively and quantitatively by GLC, UV, and¹H NMR methods. The kinetics of the reaction was studied. The thermolysis products were studied as the inhibitors in thermopolymerization of monomers. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1881–1883, October, 1997.     

Kinetic study of the protolysis of 2,6-di-tert-butyl-4-hydroxyphenoxyl

The kinetic acidity of 2,6-di-tert-butyl-4-hydroxyphenoxyl in tetrahydrofuran has been estimated by means of ESR. It is shown that ion pairs are formed in the process of proton transfer from the radical to triethylamine.A. N. Nesmeyanov Institute of Heteroorganic Compounds, Russian Academy of Sciences, 117813 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2512–2516, November, 1992.     

Coordinate anionic ring-opening polymerization of oxetanes with aluminum benzyl alcoholate bis(2,6-di-tert-butyl-4-methylphenolate)

Aluminum benzyl alcoholate bis(2,6-di-tert-butyl-4-methylphenolate) (BnOAD), which was prepared through the mixing of equimolar amounts of benzyl alcohol and methylaluminum bis(2,6-di-tert-butyl-4-methylphenolate) (MAD), successfully polymerized four-membered cyclic ethers in a coordinate anionic ring-opening manner. The polymerization of 3-(4-bromobutoxymethyl)-3-methyloxetane (OxBr) with 5 mol % BnOAD proceeded slowly in toluene at 25 °C and produced sufficiently high-molecular-weight poly(OxBr) in a moderate yield in 24 h. The polymerization was greatly accelerated by the addition of a sterically hindered Lewis acid such as MAD, and this resulted in a nearly quantitative polymer yield within 24 h. In sharp contrast, conventional cationic polymerization with boron trifluoride etherate as a typical Lewis acid initiator produced low-molecular-weight poly(OxBr) along with a substantial amount of the cyclic tetramer. The polymerization of the simplest unsubstituted oxetane with BnOAD resulted in failure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4570–4579, 2004     

Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions

A highly sensitive and selective fluorimetric optode membrane for the determination of ultra trace amounts of Ni²⁺ ions was prepared. The plasticized PVC-membrane incorporating potassium tetrakis(p-chlorophenyl)borate (KTpClPB) and 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) (TTBB), as a highly fluorescent chromoionophore, displays a calibration response for Ni²⁺ ions over a wide concentration range of 1.0×10⁻³ to 1.0×10⁻⁸ M. It has a relatively fast response of <40 s. In addition to high stability and reproducibility, and relatively long working lifetime, the sensor possesses good selectivity for nickel ions over several common diverse ions. The fluorescence signal of the optode membrane can be easily recovered by immersion in EDTA solution. The optode was applied successfully to the determination of traces of Ni²⁺ ion in edible oil and a wastewater sample from nickel electroplating industries.     

Formation and properties of a catalyst based on sodium and potassium hydroxides in the reaction of 2,6-di-tert-butylphenol with methyl acrylate

The nature of the cation (K⁺ or Na⁺) in hydroxides affects the temperature plot of the equilibrium constant of the reaction of KOH and NaOH with 2,6-di-tert-butylphenol (ArOH) and the conversion of EII and (or) NaOH to potassium or sodium 2,6-di-tert-butyl phenoxides, which are catalysts for the alkylation of ArOH by methyl acrylate. The kinetic method for determination of the composition of the catalyst formed from NaOH and ArOH was proposed. The nature of the cation in phenoxides ArOK or ArONa is a factor determining the kinetics of the reaction of ArOH with methyl acrylate. Two different kinetic schemes were proposed to describe the transformation of ArOH in the presence of ArONa or ArOK.     

Synthesis, structural, spectroscopic and reactivity properties of a new N-2,3,4-trifluorophenyl-3,5-di-tert-butylsalicylaldimine ligand and its Cu(II) and Pd(II) complexes

A new N-2,3,4-trifluorophenyl-3,5-di-tert-butylsalicylaldimine (1) complexes with Cu(II) (2) and Pd(II) (3) have been synthesized and characterized by X-ray crystallography, UV-Vis, IR, ¹H NMR and EPR spectroscopic techniques. The X-ray crystal structure of complex 2 reveals tetrahedrally distorted square-planar coordination geometry around Cu(II). The UV/Vis and EPR results indicate that the solid state geometry of 2 remains unchanged in solutions. Chemical oxidation of 3 with Ce(IV) in CHCl₃ generates relatively stable Pd(II)-phenoxyl radical complex (g = 2.0073). The results related with the chemical oxidation of 2 and 3 as well as the catalytic activity of 3 in the hydrogenation of PhNO₂ are presented.     

Synthesis of (adamantylimido)vanadium(V)-alkyl complexes containing aryloxo ligands and their use as the catalyst precursors for ring-opening metathesis polymerization of norbornene, and ring-opening polymerization of tetrahydrofuran

Various (adamantylimido)vanadium(V) dialkyl complexes containing aryloxo ligands, V(NAd)(CH₂SiMe₃)₂(OAr) [Ad = 1-adamantyl (1); Ar = Ph (a), 4-FC₆H₄ (b), 2,6-F₂C₆H₃ (c), 2,6-Me₂C₆H₃ (d), C₆F₅ (e)], have been prepared and identified. These complexes were employed as the catalyst precursors for ring-opening metathesis polymerization (ROMP) of norbornene (NBE) in the presence of PMe₃ at 80 °C. The activity was strongly affected by the aryloxo substituent and increased in the order: C₆H₅ < 4-FC₆H₄ < 2,6-Me₂C₆H₃ << 2,6-F₂C₆H₃, C₆F₅. The same trend was observed in the ROMPs by the arylimido-aryloxo analogues, V(NAr′)(CH₂SiMe₃)₂(OAr) (2a-e; Ar′ = 2,6-Me₂C₆H₃), under the same conditions, and the activities by the arylimido analogues were generally higher than the adamantylimido analogues in most case. The (imido)vanadium(V) complexes containing O-2,6-F₂C₆H₃ (1,2c) or OC₆F₅ (1,2e) exhibited high catalytic activities, and these results strongly suggest that electronic as well as steric factors play a role. Living ring-opening polymerization of THF proceeded in the presence of V(NAd) (CH₂SiMe₃)(OAr)₂ (Ar = 2,6-Me₂C₆H₃, C₆F₅) and [Ph₃C][B(C₆F₅)₄], affording high molecular weight polymers with narrow molecular weight distributions (ex. M_n = 2.11 × 10⁵, M_w/M_n = 1.18).     

Influence of multidentate N-donor ligands on highly electrophilic zinc initiator for the ring-opening polymerization of epoxides

A set of multidentate ligands have been synthesized and used to stabilize the putative highly electrophilic zinc species initiating ring-opening polymerization (ROP) of cyclohexene oxide (CHO) and propylene oxide (PO). Reaction of the bidentate C₂-chiral bis(oxazoline) ligand (^R2,R3BOX: R₂ = (4S)-tBu, R₃ = H (a); R₂ = (4S)-Ph, R₃ = H (b); R₂ = (4R)-Ph, R₃ = (5S)-Ph (c)) with Zn(R₁)₂ (R₁ = Et (1), Me (2)) led to the heteroleptic three-coordinate complexes (^R2,R3BOX)ZnR₁, 1a-c and 2a, which were isolated in 92-96% yield. Next, two pyridinyl-functionalized N-heterocyclic carbene (NHC) ligands have been designed and synthesized: the 1,3-bis(2-pyridylmethyl)imidazolinium salt (d) and the protected NHC adduct 2-(2,3,4,5,6-pentafluorophenyl)-1,3-bis(2-pyridylmethyl)imidazolidine (e). The reaction of ligands d and e with ZnEt₂ led directly to the formation of (NHC)ZnEt(Cl) 3d complex with ethane elimination and the adduct (NHC-C₆F₅(H))ZnEt₂4e, respectively, in high yield. In situ combinations of selected complexes 1a-c, 3d and 4e with B(C₆F₅)₃ (1 or 2 equivalents) give active systems for ROP, with high productivity (3.3-5.9 10⁶ g_polym. mol_Zn⁻¹ h⁻¹) and high molecular weight (M_n up to 132 10³ g mol⁻¹) for CHO polymerization. Although the in situ B(C₆F₅)₃-activated zinc species were not isolated, the sterically demanding BOX ligands (1c > 1b > 1a) and functionalized NHC ligands seem to enhance the stability of highly electrophilic zinc complexes over ligand redistribution, allowing a better control of the cationic ROP as reflected particularly for 3d and 4e complexes by their respective efficiency (42-88%).     

Synthesis of poly(ethylene adipate) and poly(ethylene adipate-co-terephthalate) via ring-opening polymerization

Syntheses of poly(ethylene adipate) (ROP-PEA) and poly(ethylene adipate-co-terephthalate) (ROP-PEA-co-PET) were achieved via ring-opening polymerization of corresponding cyclic oligoesters. In case of ROP-PEA, cyclic oligo(ethylene adipate) (C-OEA) was equilibrated in the presence of di-n-butyltin oxide as a catalyst under high-concentration conditions at 180 and 200 °C for 1-24 h. The polymer products were obtained in yields up to 100% with the and in the ranges of 3000-23 000 g/mol and 5000-60 000 g/mol, respectively. The ROP-PEA-co-PET was prepared by equilibrating an equimolar amount of C-OEA and cyclic oligo(ethylene terephthalate) (C-OET) using di-n-butyltin oxide catalyst under high-concentration conditions at 250 °C for 24 h. The copolyester produced was obtained in yield of 97% with the and of 18 000 and 46 000 g/mol, respectively. ¹H NMR spectrum of ROP-PEA-co-PET showed two new proton signals of ethylene unit representing the existence of heterolinkage with different chemical environment in the copolymer. This indicated the random transesterification of C-OEA and C-OET resulting in random structure in copolyester. In addition, the result of ROP-PEA-co-PET from DSC showed the glass transition temperature in the values of −8 °C with no melting temperature indicating thermoplastic elastomeric behavior.     

Composition of products and mechanism of the reaction of ozone with 2,6-di(tert-butyl)-4-methylphenol

It was shown that two series of products with opening and with preservation of the aromatic nucleus are formed in the reaction of ozone with ionol, and a mechanism was proposed for the reaction.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117334 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 5, pp. 1203–1207, May, 1992.     

Synthesis and characterization of para-nitro substituted 2,6-bis(phenylimino)pyridyl Fe(II) and Co(II) complexes and their ethylene polymerization properties

Four iron(II) and cobalt(II) complexes ligated by 2,6-bis(4-nitro-2,6-R₂-phenylimino)pyridines, LMCl₂ (1: R = Me, M = Fe; 2: R = iPr, M = Fe; 3: R = Me, M = Co; 4: R = iPr, M = Co) have been synthesized and fully characterized, and their catalytic ethylene polymerization properties have been investigated. Among these complexes, the iron(II) pre-catalyst bearing the ortho-isopropyl groups (complex 2) exhibited higher activities and produced higher molecular weight polymers than the other complexes in the presence of methylaluminoxane (MAO). A comparison of 2 with the reference non-nitro-substituted catalyst (2,6-bis(2,6-diisopropylphenylimino)pyridyl)FeCl₂ (FeCat 5) revealed a modest increase of the catalytic activity and longer lifetime upon substitution of the para-positions with nitro groups (activity up to 6.0 × 10³ kg mol⁻¹ h⁻¹ bar⁻¹ for 2 and 4.8 × 10³ kg mol⁻¹ h⁻¹ bar⁻¹ for 5), converting ethylene to highly linear polyethylenes with a unimodal molecular weight distribution around 456.4 kg mol⁻¹. However, the iron(II) pre-catalyst 1 on changing from ortho-isopropyl to methyl groups displayed much lower activities (over an order of magnitude) than 2 under mild conditions. As expected, the cobalt analogues showed relatively low polymerization activities.     

Tetramethylguanidino‐tris(2‐aminoethyl)amine: A novel ligand for copper‐based atom transfer radical polymerization

With CuBr/tetramethylguanidino‐tris(2‐aminoethyl)amine (TMG₃‐TREN) as the catalyst, the atom transfer radical polymerization (ATRP) of methyl methacrylate, n‐butyl acrylate, styrene, and acrylonitrile was conducted. The catalyst concentration of 0.5 equiv with respect to the initiator was enough to prepare well‐defined poly(methyl methacrylate) in bulk from methyl methacrylate monomer. For ATRP of n‐butyl acrylate, the catalyst behaved in a manner similar to that reported for CuBr/tris[2‐(dimethylamino)ethyl]amine. A minimum of 0.05 equiv of the catalyst with respect to the initiator was required to synthesize the homopolymer of the desired molecular weight and low polydispersity at the ambient temperature. In the case of styrene, ATRP with this catalyst occurred only when a 1:1 catalyst/initiator ratio was used in the presence of Cu(0) in ethylene carbonate. The polymerization of acrylonitrile with CuBr/TMG₃‐TREN was conducted successfully with a catalyst concentration of 50% with respect to the initiator in ethylene carbonate. End‐group analysis for the determination of the high degree of functionality of the homopolymers synthesized by the new catalyst was determined by NMR spectroscopy. The isotactic parameter calculated for each system indicated that the homopolymers were predominantly syndiotactic, signifying that the tacticity remained the same, as already reported for ATRP. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5906–5922, 2005     

RING-OPENING POLYMERIZATION OF 1,4-DIOXAN-2-ONE INITIATED BY LANTHANUM TRIS( 2,6-DI- TERT-B UTYL-4-METHYLPHENOLATE)

The ring-opening polymerization of 1,4-dioxan-2-one (PDO) was carried out by lanthanum tris(2,6-di-tert-butyl-4-methylphenolate) (La(OAr)3) as novel single component initiator. The influences of polymerization reaction temperature and the molar ratio of monomer to initiator on the monomer conversion and molecular weight of poly(1,4-dioxan-2-one) (PPDO) were explored. PPDO with high viscosity average molecular weight of 1.95 × 105 can be prepared at 40℃ when [PDO]/ [La(OAr)3] molar ratio was 800. Mechanism investigation shows that the polymerization proceeds through a "coordinationinsertion" mechanism with selective rupture of acyl-oxygen bond of PDO.     

A new sulfonamide derivative as magnesium ion receptor: N-tosyl-2,6-diisopropyl-4-(2,3-dimethoxylbenzoylamide)aniline

N-Tosyl-2,6-diisopropyl-4-(2,3-dimethoxylbenzoylamide)aniline (1) has been synthesized and its metal ion (Na⁺, K⁺, Ca²⁺, Mg²⁺) coordinating properties investigated by FT-IR, ESI-MS, and ¹H NMR methods. Among the tested metal ions, the overall stability constant (log K) for Mg²⁺ (6.89) is the highest (Na⁺, 5.64; K⁺, 5.43; Ca²⁺, 5.51) in 10% water/THF at 25.0 ± 0.5 °C determined by UV-vis spectroscopy, indicating that 1 is a potent ionophore for Mg²⁺ ion.     

Multicyclic polyethers derived from 1,1,1‐tris(4‐hydroxyphenyl)ethane and 2,6‐dihalopyridines

Poly(pyridine ether)s were prepared in two ways: the polycondensation of silylated 1,1,1‐tris(4‐hydroxyphenyl)ethane (THPE) with 2,6‐difluoropyridine (method A) and the polycondensation of free THPE with 2,6‐dichloropyridine (method B). With method A, the THPE/difluoropyridine feed ratio was varied from 1.0:1.0 to 1.0:1.6. Cycles, bicycles, and multicycles were the main reaction products, and crosslinking was never observed. When ideal stoichiometry was used exclusively, multicycles free of functional groups were obtained. These multicycles were detectable in matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectra up to B₃₈C₇₆ with a mass of approximately 32,000 Da. With method B, the reaction conditions were varied at a fixed feed ratio to achieve an optimum for the preparation of multicyclic polyethers, but because of the lower reactivity of 2,6‐dichloropyridine, a quantitative conversion was not achieved. The reaction products were characterized with MALDI‐TOF mass spectrometry, viscosity measurements, and size exclusion chromatography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5725–5735, 2004     

Spirooxindoles: reaction of 2,6-diaminopyrimidin-4(3H)-one and isatins

A simple and efficient cyclocondensation reaction of 2,6-diaminopyrimidin-4(3H)-one and isatins for the synthesis of spiro[pyrimido[4,5-b]quinoline-5,5′-pyrrolo[2,3-d]pyrimidine] and spiro[indoline-pyrido[2,3-d:6,5-d′]dipyrimidine] derivatives is reported.