Silica nanoparticle covered with mixed polymer brushes as Janus particles at water/oil interface

Silica nanoparticles (NSiO₂) are modified with mixed polymer brushes derived from a block copolymer precursor, poly(methyl methacrylate)-b-poly(glycidyl methacrylate)-b-poly(tert-butyl methacrylate) with short middle segment of PGMA, through one step ??grafting-onto?? approach. The block polymer precursors are prepared via reversible addition?Cfragmentation chain transfer-based polymerization of methyl methacrylate, glycidyl methacrylate, and tert-butyl methacrylate. The grafting is achieved by the reaction of epoxy group in short PGMA segment with silanol functionality of silica. After hydrolysis of poly(tert-butyl methacrylate) segment, amphiphilic NSiO₂ with ??V-shaped?? polymer brushes possessing exact 1:1 molar ratio of different arms were prepared. The functionalized particles self-assemble at oil/water interfaces to form stable large droplets with average diameter ranging from 0.15?±?0.06 to 2.6?±?0.75?mm. The amphiphilicity of the particles can be finely tuned by changing the relative lengths of poly(methyl methacrylate) and poly(methacrylic acid) segments, resulting in different assembly behavior. The method may serve as a general way to control the surface property of the particles.     

Synthesis of composite latex particles filled with silica

Encapsulation of silica nanoparticles was performed by dispersion polymerization of styrene, butyl acrylate and butyl methacrylate in aqueous alcoholic media. Following previous works^1‐3), the silica beads were first modified by reacting on their surface the 3‐trimethoxysilyl propyl methacrylate coupling agent (MPS). In every case, the silica beads are all surrounded by polymer giving composite latex particles filled with silica. Each composite particle contains from one to a great number of silica beads. Changing the size or the concentration of the silica beads, and the experimental conditions for the synthesis of the polymer particles enables to control this number. One can take benefit of this to synthesize model composite particles with controlled compositions.     

Preparation and clinical application of immunomagnetic latex

Magnetic poly(methyl methacrylate) (PMMA)/poly(methyl methacrylate‐co‐methacrylic acid) [P(MMA–MAA)] composite polymer latices were synthesized by two‐stage soapless emulsion polymerization in the presence of magnetite (Fe₃O₄) ferrofluids. Different types and concentrations of fatty acids were reacted with the Fe₃O₄ particles, which were prepared by the coprecipitation of Fe(II) and Fe(III) salts to obtain stable Fe₃O₄ ferrofluids. The Fe₃O₄/polymer particles were monodisperse, and the composite polymer particle size was approximately 100 nm. The morphology of the magnetic composite polymer latex particles was a core–shell structure. The core was PMMA encapsulating Fe₃O₄ particles, and the shell was the P(MMA–MAA) copolymer. The carboxylic acid functional groups (COOH) of methacrylic acid (MAA) were mostly distributed on the surface of the composite polymer latex particles. Antibodies (anti‐human immunoglobulin G) were then chemically bound with COOH groups onto the surface of the magnetic core–shell composite latices through the medium of carbodiimide to form the antibody‐coated magnetic latices (magnetic immunolatices). The MAA shell composition of the composite latex could be adjusted to control the number of COOH groups and thus the number of antibody molecules on the magnetic composite latex particles. With a magnetic sorting device, the magnetic immunolatices derived from the magnetic PMMA/P(MMA–MAA) core–shell composite polymer latex performed well in cell‐separation experiments based on the antigen–antibody reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1342–1356, 2005     

Comparative study of monomer droplet nucleation in the seeded batch and semibatch miniemulsion polymerisation of styrene

Monomer droplet nucleation in the seeded miniemulsion polymerisation of styrene under monomer-flooded and monomer-starved conditions was studied. The miniemulsion feeds were added to the reactor either batchwise or semibatchwise. The droplets preserved longer under flooded conditions. As a result, the batch operation led to a larger number of particles (N_p) than the semibatch operation. For the miniemulsion droplets containing predissolved polymer, the final N_p was independent of the way that the feed was added to the reactor and was equivalent to the number of monomer droplets in the original miniemulsion feed. The size distribution of the final latexes, however, was influenced by the operation type. For the batch operation, the rate of polymerisation (R_p) with the miniemulsion feeds was higher than that with the conventional monomer emulsion feed because of the monomer droplet nucleation. But for the semibatch operation, the opposite was true because of R_p controlled by the rate of monomer diffusion from rather stable miniemulsion droplets to the growing polymer particles.     

Synthesis and properties of soap-free poly(methyl methacrylate-ethyl acrylate-methacrylic acid) latex particles prepared by seeded emulsion polymerization

In order to obtain functional polymer latex particles with clean surface and with surface carboxyl groups, P(MMA-EA) seed particles with the diameter of 335 nm were first synthesized via soap-free batch emulsion polymerization of methyl methacrylate (MMA) and ethyl acrylate (EA), and then the seeded emulsion copolymerization of MMA, EA and MAA (methacrylic acid) onto the seed particles were performed in the absence of emulsifier. Influences of ingredients and conditions on polymerization, latex particle size (D_p) and its distribution were investigated. Results showed that most of the monomers polymerized onto the seed latex particles in the second step of polymerization by using drop-wise addition method, and D_p increased from 483 nm to 829 nm with the mass ratio of core/shell monomers [C]/[S] decreased from 1:2 to 1:15. It was found that D_p decreased with the increase of MAA and initiator amounts, and the size of the latex particles became uniform with the decrease of MAA amount and with the increase of [C]/[S] value.     

Synthesis and evaluation of new propazine-imprinted polymer formats for use as stationary phases in liquid chromatography

Silica particles have been used as supports for the preparation of three different propazine-imprinted polymer formats. First format refers to grafting of thin films of molecularly imprinted polymers (MIPs) using an immobilised iniferter-type initiator (inif-MIP). The other two new formats were obtained by complete filling of the silica pores with the appropriate polymerisation mixture leading to a silica-MIP composite material (c-MIP) followed by the dissolution of the silica matrix resulting in spherical MIP beads (dis-MIP). These techniques offer a mean of fine-tuning the particle morphology of the resulting MIP particles leading to enhanced capacity in chromatographic applications. Porous silica (specific surface area S = 380 m² g⁻¹, particle size p_s = 10 μm, pore volume V_p = 1.083 ml g⁻¹ and pore diameter d_p = 10.5 nm), methacrylic acid and ethylenglycol dimethacrylate were used for the preparation of the materials. All the MIP formats imprinted with propazine have been characterised by elemental analysis, FT-IR spectroscopy, nitrogen adsorption and scanning electron microscopy. Further, the materials were assessed as stationary phases in HPLC. Capacity factors, imprinting factors and theoretical plate numbers were calculated for propazine and other related triazines in order to compare the chromatographic properties of the three different stationary phases. For the inif-MIPs the column efficiency depended strongly on the amount of grafted polymer. Thus, only the polymers grafted as thin films of ca. 1.3 nm average thickness show imprinting effects and the highest column efficiency giving plate numbers (N) of 1600 m⁻¹ for the imprinted propazine. The performance of the c-MIP stationary phase decreases as result of the complete pore filling after polymerisation and increases again after the removal of the silica matrix due to a better mass transfer in the porous mirror-image resulting polymer. From this study can be concluded that the inif-MIP shows the best efficiency for use as stationary phase in HPLC for the separation of triazinic herbicides.     

Synthesis of Macroporous PMMA/Silica Nanocomposite Monoliths in Supercritical Carbon Dioxide

Summary: Macroporous monoliths consisting of silica nanoparticles embedded in poly(methyl methacrylate) (PMMA) were synthesized in supercritical CO₂. Well‐dispersed silica particles, pretreated with functional 3‐(trimethoxysilyl)propyl methacrylate (MPS), were to form colloidal PMMA nanocomposites followed by a sol‐gel transition forming interconnected structures resulting in micron‐sized pores with specific areas between 1 and 7 m² · g⁻¹. SEM and TEM results revealed uniform morphological characteristics of the composite materials and good dispersions of the silica nanoparticles.

SEM micrograph of PMMA/Silica nanocomposites forming interconnected macroporous monolith. The average size of the silica particles is 50 nm.     

Development of polyoxadiazole nanocomposites for high temperature polymer electrolyte membrane fuel cells

Novel nanocomposite membranes were prepared with sulfonated polyoxadiazole and different amounts of sulfonated dense and mesoporous (MCM-41) silica particles. It has been shown that particle size and functionality of sulfonated silica particles play an important role when they are used as fillers for the development of polymer electrolyte nanocomposite membrane for fuel cells. No significant particle agglomerates were observed in all nanocomposite membranes prepared with sulfonated dense silica particles, as analyzed by SEM, AFM, TGA, DMTA and tensile tests. The T_g values of the composite membranes increased with addition of sulfonated silica, indicating an interaction between the sulfonic acid groups of the silica and the polyoxadiazole. Constrained polymer chains in the vicinity of the inorganic particles were confirmed by the reduction of the relative peak height of tan δ. A proton conductivity of 0.034 S cm⁻¹ at 120 °C and 25% RH, which is around two-fold higher than the value of the pristine polymer membrane was obtained.     

Preparation of polyacrylate–polysiloxane core–shell latex particles

Crosslinked polymer seed latexes of butyl acrylate, methyl methacrylate and methacrylic acid were synthesized with ethylene glycol dimethacrylate as a crosslinking agent in a first step. Three different processes of seeded emulsion polymerization were used to prepare an outlayer of polysiloxane on the above seed latex particles: (A) direct anionic polymerization of D₄ (octamethyl tetracyclosiloxane) catalyzed by potassium hydroxide; (B) direct cationic polymerization of D₄ onto the seed catalyzed by dodecylbenzene sulfonic acid; (C) a vinyl-containing polysiloxane prepared by copolymerization of D₄ and vinyl septamethyl tetracyclosiloxane was added before the D₄ cationic polymerization. Characterization by transmission electron microscopy showed that only process C provided satisfactory results. Film hardness was measured, and the latex film from process C demonstrated the lowest hardness of all the films. The mechanism of polymerization is discussed.     

Preparation of poly(methyl methacrylate)/CaCO3/SiO2 composite particles via emulsion polymerization

A novel method to prepare organic/inorganic composite particles, i.e. poly(methyl methacrylate)/CaCO₃/SiO₂ three-component composite particles, using emulsion polymerization of methyl methacrylate with sodium lauryl sulfate as a surfactant in an aqueous medium was reported. CaCO₃/SiO₂ two-component inorganic composite particles were obtained firstly by the reaction between Na₂CO₃ and CaCl₂ in porous silica (submicrometer size) aqueous sol and the specific surface area of the particles was measured by the Brunauer–Emmett–Teller (BET) method. The results show that the BET specific surface area of the CaCO₃/SiO₂ composite particle is much smaller than that of the silica particle, indicating that CaCO₃ particles were adsorbed by porous silica and that two-component inorganic composite particles were formed. Before copolymerization with methyl methacrylate, the inorganic composite particles were coated with a modifying agent through covalent attachment. The chemical structures of the poly(methyl methacrylate)/CaCO₃/SiO₂ composite particles obtained were characterized by Fourier transform IR spectroscopy and thermogravimetric analysis. The results show that the surface of the modified inorganic particles is grafted by the methyl methacrylate molecules and that the grafting percentage is about 15.2%.     

Characterization of physical structure of silica nanoparticles encapsulated in polymeric structure of polyamide films

Polyamide nanocomposite films were prepared from nanometer sized silica particles and trimesoyl chloride–m-phenylene diamine based polyamides. The type of silica nanoparticles used is commercial LUDOX^® HS-40 and the particle size characterized by the radius of gyration (R_g) is about 66 Å. The immediately prepared films were easily broken into particles to form colloidal-like dilute suspension of the silica–polyamide composite particles in D₂O–H₂O solutions for SANS measurements, that in this dilute system SANS data the complication of scattering data from the interacting particles is minimized. At about 60% D₂O of the sample solution, the silica is contrasted out, therefore the SANS profiles are predominantly from the organic polyamide scattering. The SANS profile of the sample solutions measured at 90% D₂O clearly indicates scattering from both silica and polymer. The scattering heterogeneities for two-phase system were evident from the validity of the Debye–Bueche expression in case of the nanocomposite with high silica loading. At limited silica loading of the nanocomposite, interaction between the silica and polymer chains forming core–shell morphology was observed. The transport properties of the membranes made from the nanocomposite films were measured on a batch type test kit with an aqueous solution of 500 ppm dioxane concentration at pressures ranging from 50 to 200 psig, and correlated to their composite structure.     

Amphiphilic poly(N,N-dimethylamino-2-ethyl methacrylate)-g-poly(ε-caprolactone) graft copolymers: synthesis and characterisation

Amphiphilic poly(N,N-dimethylamino-2-ethyl methacrylate)-g-poly(ε-caprolactone) graft copolymers (PDMAEMA-g-PCL) with various compositions and molecular weights were synthesised via a fully controlled three-step strategy. First, poly(ε-caprolactone) macromonomers (PCLMA) were prepared by ring-opening polymerization (ROP) of ε-caprolactone (CL) initiated by aluminum triisopropoxide (Al(OⁱPr)₃), followed in a second step by quantitative esterification of PCL hydroxy end-groups with a methacrylic acid derivative. Finally, the controlled copolymerization of PCLMA and N,N-dimethylamino-2-ethyl methacrylate (DMAEMA) was carried out by atom transfer radical polymerisation (ATRP) in THF at 60 °C using CuBr ligated with 1,1,4,7,10,10, hexamethyl triethylenetetramine and ethyl 2-bromoisobutyrate as catalyst and initiator, respectively. Furthermore, PDMAEMA-g-PCL graft copolymers were reacted with methyl iodide to convert the pendant tertiary amines into quaternary ammonium iodides increasing accordingly their water solubility. Some preliminary experiments was further carried out by tensiometry and dynamic light scattering in order to shed so light on the tensioactive behaviour of these amphiphilic graft copolymers (with protonated amines or quaternary ammonium cations).     

Development and characterisation of a molecularly imprinted polymer prepared by precipitation polymerisation for the determination of phenylurea herbicides

New materials based on molecularly imprinted polymers (MIPs) have been developed for use as sorbents in solid phase extraction to preconcentrate some urea herbicides. In the preconcentration step, different molecularly imprinted polymers were tested using methacrylic acid (MAA) and 2-(trifluoromethyl)acrylic acid (TFMAA) as functional monomers, and linuron and isoproturon as templates. The best results were obtained when the polymer was synthesised using MAA with isoproturon as template. Another parameter evaluated was the way in which the polymer was obtained. We observed that the imprinted polymers obtained by precipitation displayed a greater capacity to retain the phenylureas. Studies conducted using scanning electron microscopy (SEM) revealed that the bulk polymerisation method is far from ideal owing to the random shape and size distribution of the particles obtained, whereas when polymerisation was carried out in precipitation microspheres were obtained. In order to confirm the interaction between the functional monomer and the template, 1H NMR (CD2Cl2) analyses were conducted. The results obtained suggest that the hydrogen and/or nitrogen of the amino group of the template would be involved in the formation of hydrogen bonds with the functional monomer. The imprinted polymer obtained by precipitation polymerisation with MAA as functional monomer and isoproturon as template can be applied to preconcentrate phenylureas when the sample is dissolved in toluene. The proposed methodology was employed to evaluate polymer selectivity towards humic acids and towards other herbicides.     

Structure and infrared emissivity of polyimide/mesoporous silica composite films

Polyimide/mesoporous silica composite films were prepared by direct mixing of polyamic acid solution and silylated mesoporous silica particles, or by condensation polymerization of dianhydride and diamine with silylated mesoporous silica particles in N,N-dimethylacetamide, followed with thermal imidization. Structure and glass transition temperatures of the composite films were measured with FTIR, SEM, EDX, XPS and DMTA. The results show that the silylated mesoporous silica particles in the composites tend to form the aggregation with a strip shape due to phase separation. The composite films exhibit higher glass transition temperature as comparing with that of pure polyimide. It is found that the composite films present lower infrared emissivity value than the pure polyimide and the magnitude of infrared emissivity value is related to the content of silylated mesoporous silica in the composite films. Inhibiting actions of silylated mesoporous silica on infrared emission of the composite films may be owing to presence of nanometer-scale pores in silylated mesoporous silica.     

Carbon nanotubes and fullerene in the solution polymerisation of acrylonitrile

The radical activity of single wall carbon nanotubes (SWCNT) and fullerene C₆₀ in the radical polymerisation of acrylonitrile (AN) in N,N-dimethylformamide (DMF) initiated by 2,2′-azobis[2-methyl-ω-hydroxy-oligo(oxyethylene) propionate] [AIB-OOE(4 0 0)] and 2,2′-azoisobutyronitrile (AIBN) at 333 K was investigated in situ using a dilatometric method. The carbonaceous substances were sonicated in DMF before the polymerisation. The changes in the process proceeding in the presence of SWCNT and C₆₀ in a comparison to the course of AN polymerisation without the participation of carbonaceous substances (the decrease of the reaction rate, the induction time) indicated on the inhibition effect, which can be described quantitatively using the inhibition parameter F. Single wall carbon nanotubes were found to act as retarders whereas fullerene C₆₀ as an inhibitor in the AN polymerisation. The changes in the chemical structure of products reveal that the carbon nanotubes and fullerenes are chemically bonded with the polymer.     

Thermal stability of poly(methyl methacrylate)/silica nano- and microcomposites as investigated by dynamic-mechanical experiments

The thermal stability of poly(methyl methacrylate) (PMMA) filled with silicon dioxide particles was investigated by means of rheological tests. The change in the storage modulus G′ was measured, which is a very sensitive method to detect molecular changes in polymers. The long-term thermal stability of the composites was found to depend on the temperature of the melt, the size of the silica particles, which ranged from nano- to micrometers, and the volume fraction of the filler. For high temperatures and a large surface area of the silica particles the behaviour of the composites differs significantly from that of the pure polymer. Pure PMMA degrades at high temperatures, which correlates with a decrease of G′. In contrast an increase in G′ with increasing temperature and filler surface was measured for the composite materials. This behaviour is explained by chemical reactions of the PMMA molecules with the silica particles. Effects of that kind were not found for SiO₂ filled polystyrene.     

Effect of hydrophilicity of polymer particles on their glass transition temperatures in the emulsion state

The glass transition temperatures (Tg) of three kinds of poly(methyl methacrylate)-based copolymer emulsions having wide polymer compositions, which were prepared by emulsifier-free emulsion copolymerizations of methyl methacryalate with ethyl acrylate, n-buthyl methacrylate and methacrylic acid, were measured with a power compensation-type highly sensitive differential scanning calorimeter. The Tg values of the copolymers in their emulsion state (Tg _E) were always lower than those in their dry states (Tg _D), and the difference between Tg _E and Tg _D increased with an increase in copolymer hydrophilicities.Part CCLIII of the series Studies on Suspension and Emulsion     

Bis allyl benzoxazine: Synthesis, polymerisation and polymer properties

A bis benzoxazine monomer with allyl groups viz: 2,2′-bis (8-allyl-3-phenyl-3,4-dihydro-2H-1,3-benzoxazinyl) propane (Bz-allyl) was synthesized via a solventless method from 2,2′diallyl bisphenol-A, paraformaldehyde and aniline. The chemical structure of Bz-allyl was confirmed by FTIR, ¹H NMR and ¹³C NMR analyses. The monomer manifested a two-stage thermal polymerisation pattern. The first stage was attributed to the polymerisation of the allyl groups and the second to the ring - opening polymerisation of benzoxazine moiety. The polymerisation profile was investigated with DSC, FT-IR, TGA and pyrolysis-GC techniques. A polymerisation mechanism involving the electrophilic addition of the propagating iminium cation on the aniline ring in lieu of the activated sites of bisphenol-A, (which are blocked by allyl and alkyl substituents) was proposed. Additional cross-linking was provided by thermal addition polymerization of allyl groups. As a result of altered cross-linking via the aniline moiety and the additional cross-linking via allyl groups, the cured polymer exhibited a T_g of ca. 300 °C and high crosslink density. The thermal stability of this polymer was also substantially higher vis-à-vis that of the bisphenol-A based polybenzoxazine. The work focuses on the manipulation of benzoxazine monomer structure to alter the ring-opening polymerisation mechanism and cross-linking to derive polybenzoxazine with improved properties.     

Diffusion‐Controlled Particle Growth and its Effects on Nucleation in Stirred Emulsion Polymerisation Reactors

Summary: Particle formation and growth in the batch emulsion homo‐polymerisation of styrene and methyl methacrylate monomers under diffusion‐controlled conditions were studied. The polymerisations started with two stratified layers of a monomer and water containing an initiator and a surfactant, with the water layer being gently stirred. Because of limitations in monomer transport, the rate of particle growth was substantially reduced and as a result a large number of polymer particles formed.

Schematic presentation of the highly diffusion‐controlled polymerisation.     

Vinyl phenylboronic acid controlling co‐monomer for nitroxide mediated synthesis of thermoresponsive poly(2‐N morpholinoethyl methacrylate)

Low concentrations of 4‐vinylphenylboronic acid (VPBA) were copolymerized with 2‐N‐morpholinoethyl methacrylate (MEMA) by nitroxide mediated polymerization using BlocBuilder? unimolecular initiator at 80 to 90 °C. The MEMA/VPBA copolymerizations were performed at initial feed compositions (f_VPBA,0) of 0.05 to 0.10 VPBA, with f_VPBA,0 = 0.10 using dimethylacetamide (DMAc) solvent being most effective, as seen by a linear increase in number average molecular weight, M_n, versus conversion and low dispersity, ? < 1.40. The copolymers were further chain‐extended with a second batch of VPBA, resulting in a block copolymer with monomodal molecular weight distribution and ? = 1.66. For MEMA/VPBA copolymers, increases in VPBA composition and polymer solution concentration resulted in decreases in the cloud point temperature (CPT, typically varied between 27.4–37.8 °C) and CPT increased from 31.2 to 33.8 °C to about 88 °C with decreases in pH from 7 to 4. Rheological tests with small angle light scattering (SALS) confirmed CPTs measured by UV‐Vis and DLS. These copolymers were targeted as models to combine possible glucose‐sensing boronic acid functionality the thermoresponsiveness provided by MEMA groups. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1560–1572