Synthesis, characterization and flocculation performance of zwitterionic copolymer of acrylamide and 4-vinylpyridine propylsulfobetaine

A novel zwitterionic polyacrylamide AMVPPS copolymer containing sulfobetaine groups was synthesized by copolymerizing acrylamide (AM) and 4-vinylpyridine propylsulfobetaine (4-VPPS) in 0.5 mol/L NaCl solution with potassium persulfate (K₂S₂O₈) and sodium bisulfite (NaHSO₃) as initiator. The structure and composition of AMVPPS copolymer were characterized by FT-IR spectroscopy, ¹H NMR and elemental analyses. Thermal stability and solution properties of AMVPPS copolymer were studied by thermogravimetry analysis (TGA) and viscometry. Anti-polyelectrolyte behavior was observed and was found to be enhanced with increasing 4-VPPS content in copolymer. The flocculation performance for 2.5 g/L kaolin suspension and 2.5 g/L hematite suspension was evaluated by transmittance measurement and phase contrast microscopy. The effects of 4-VPPS content in the copolymer, intrinsic viscosity and the added salt on the flocculation performance were investigated. It was found that AMVPPS copolymer was a good flocculant for both anionic kaolin and cationic hematite suspensions and the flocculation performance of copolymer was much better than that of pure polyacrylamide (PAM). A very wide range of the optimum flocculation concentration, named as “flocculation window”, was found for both suspensions. These flocculation characteristics were mainly dependent on the charge neutralization, the intragroup conformation transition from water to NaCl solution and then the interchain bridging of the zwitterionic AMVPPS copolymer.     

Effect of ring substituents on crystal packing and H-bonding in a series of halobis(phen)copper(II) arylphosphonic acid complexes

The synthesis and crystal structures of five new analogues of the supramolecular copper(II) organophosphonate [Cu^II(phen)₂Cl][(C₆H₅PO(OH)₂)((OH)O₂PC₆H₅)] (1) are presented. The structures contain substituted phenylphosphonic acids, and are of the general formula [Cu^II(phen)₂Cl][(XPO(OH)₂)((OH)O₂PX)] · Z, where X = o-CH₃(C₆H₅) (2); X = p-CH₃(C₆H₅), Z = H₂O · 2CH₃CH₂OH (4); X = o-NO₂(C₆H₅), m-NO₂(C₆H₅) (5); X = m-NO₂(C₆H₅) (6); X = C₁₀H₇ (7).     

Synthesis and structural characterization of organotin(IV) carboxylates based on different heterocyclic substituents

Six novel organotin(IV) carboxylates have been successfully synthesized, namely, the polymer (C₆H₅)₃Sn(L1)_∞ (1) [HL1 = 4-imidazolyl benzoic acid], the mononuclear (C₆H₅)₃Sn(L2) (2) [HL2 = 4-pyrazolylbenzoic acid], (C₆H₅)₃Sn(L3)·CH₃OH (3) [HL3 = 4-triazolylbenzoic acid] and (C₆H₅)₃Sn(L4) (4) [HL4 = 4-tetrazolyl benzoic acid] and the tetranuclear [(n-Bu₂Sn)₄(L2)₂O₂(OCH₃)₂] (5) and [(n-Bu₂Sn)₄(L3)₂O₂(OCH₃)₂] (6). X-ray diffraction analyses show 1D infinite chain of polymer 1, single molecular structures of isomorphous complexes 2 and 4, single molecule structures of complex 3 containing solvent CH₃OH molecule and similar ladder-type structures of complexes 5 and 6. The photoluminescence of ligands and 1-6 were also measured in the solid state at room temperature.     

New route to alkylaluminum hydroxides via hydrolysis of cyclopentadienylaluminum complexes

A novel, very simple and effective synthetic method for the formation of alkylaluminum complexes with terminal hydroxy group via hydrolysis of cyclopentadienylaluminum compounds has been found. Investigations of the hydrolysis of cyclopentadienylaluminum complexes (L)Al(Me)Cp (1) and (L)Al(Et)Cp (2) (L = HC[(CMe)(2,6-ⁱPr₂C₆ H₃N)]₂) have shown that the reaction leads to the formation of (L)Al(Me)OH (3) and (L)Al(Et)OH (4), respectively. The high selectivity of the hydrolysis was revealed. The crystal structures of 1, 2 and 4 were determined.     

Three novel Cd(II) coordination polymers: Synthesis,crystal structures,fluorescence and thermal properties

Three novel Cd(II) coordination polymers, {[Cd(C₄BIm)(N₃)(OAc)]·C₂H₅OH}_n (1), [Cd(C₄BIm)(H₂O)₃(SO₄)]_n (2) (C₄BIm = 1,4-bis(benzimidazolyl)butane) and [Cd(bbbm)_1.5(NO₃)₂]_n (3) (bbbm = 1,1′-(1,4-butanediy)bis-1H-benzimidazole) have been prepared and characterized spectroscopically and crystallographically. In polymer 1, C₄BIm–Cd chains and N₃–Cd chains criss-cross to a layer structure. Polymer 2 possesses a concave–convex chain structure. Polymer 3 exhibits a two-dimensional (2-D) rhomboid grid network, the dimensions of the grid is 25.807 × 13.771 Å, and the diagonal-to-diagonal distances are 28.608 × 21.145 Å. The fluorescence properties and the thermal stabilities of the three polymers were investigated.     

Characterization of an aluminium(III)–citrate species by means of ion chromatography with inductively coupled plasma-atomic emission spectrometry detection

The aluminium(III)–citrate complex (NH₄)₄[Al₂(C₆H₄O₇)(C₆H₅O₇)₂]·4H₂O was characterized using anion exchange chromatography on-line coupled with the element specific ICP-AES detector. Time-dependent monitoring of individual species in aqueous solution at different temperatures gave information about the species stability and the decomposition pathway. The aluminium–citrate complex (NH₄)₄[Al₂(C₆H₄O₇)(C₆H₅O₇)₂]·4H₂O disintegrated via an unknown intermediary Al(III)–citrate species from which the thermodynamically stable complex [Al₃(C₆H₄O₇)₃(OH)(H₂O)]⁴⁻ was formed. The activation energy for the decomposition reaction and the pre-exponential factor were determinated to be E_a = 81.95 kJ mol⁻¹ and A = 3.62 × 10¹³ s⁻¹.     

(27)Al NMR and Raman spectroscopic studies of alkaline aluminate solutions with extremely high caustic content - Does the octahedral species Al(OH)(6)(3-) exist in solution?

²⁷Al NMR and Raman spectra of alkaline aluminate solutions with 0.005 M ≤ [Al(III)]_T ≤ 3 M in various M′OH solutions (M′⁺ = Na⁺, K⁺ and Li⁺) were recorded and analysed. Caustic concentrations up to 20 M were used to explore whether higher aluminium hydroxo complexes are formed at extremely high concentrations of hydroxide. A single peak was observed on the ²⁷Al NMR spectrum of each solution. The chemical shift of this peak shifts significantly upfield with increasing [M′OH]_T in solutions with [Al(III)]_T < 0.8 M. This variation shows a strong dependence on the cation of the solution and practically disappears in systems with [Al(III)]_T ≥ 0.8 M. For Raman spectra of solutions with [Al(III)]_T = 0.8 M and [NaOH]_T ≥ 10 M, the peak maximum of the symmetric ν₁-AlO₄ stretching of Al(OH)₄⁻ shifted progressively from ∼620 to ∼625 cm⁻¹ and decreased in intensity with increasing [NaOH]_T. In parallel, modes centred at ∼720 and ∼555 cm⁻¹ (cf. ∼705 and ∼535 cm⁻¹ at lower [NaOH]_T, ascribed to a dimeric aluminate species appeared, and their intensities increased with increasing [NaOH]_T. These variations in the ²⁷Al NMR and Raman spectra can be interpreted in terms of contact ion-pairs formed between the cation of the medium and the well-established Al(OH)₄⁻ or the dimeric aluminate species. Assumption of higher aluminium hydroxo complex species (e.g., Al(OH)₆³⁻) is not necessary to explain the spectroscopic effects observed.     

Advantages of the Ns group in the reactions of N-SO2R inosines with benzylamine and with NH3

The reactivity of N¹-alkylsulfonyl- and N¹-arylsulfonyl-2′,3′,5′-tri-O-acetylinosine with benzylamine and with ¹⁵NH₃, regarding the attack on C2, has been shown to be in the order CF₃SO₂ (Tf) > 2,4-(NO₂)₂C₆H₃SO₂ (DNs) ? 4-NO₂C₆H₄SO₂ (pNs) ≈ C₆F₅SO₂ (PFBs) > 2-NO₂C₆H₄SO₂ (Ns) ? CH₃SO₂ (Ms) > 4-CH₃C₆H₄SO₂ (Ts) > 2,4,6-(CH₃)₃C₆H₂SO₂ (Mts). In spite of its intermediate reactivity, the Ns group is the most appropriate, since in this case the formation of by-products is minimised during the ring-opening and ring-closing steps of the process. Another advantage of the Ns group is thus disclosed.     

Synthesis of neutral and cationic monocyclopentadienyl alkyl niobium and tantalum complexes

Compound [NbCp′Me₄] (Cp′ = η⁵-C₅H₄SiMe₃, 1) reacted with several ROH compounds (R = tBu, SiiPr₃, 2,6-Me₂C₆H₃) to give the derivatives [NbCp′Me₃(OR)] (R = tBu 2a, SiiPr₃2b, 2,6-Me₂C₆H₃2c). The diaryloxo tantalum compound [TaCp^∗Me₂(OR)₂] (Cp^∗ = η⁵-C₅Me₅, R = 2,6-Me₂C₆H₃3) was obtained by reaction of [TaCp^∗Cl₂Me₂] with 2 equiv of LiOR (R = 2,6-Me₂C₆H₃). Abstraction of one methyl group from these neutral compounds 1-3 with the Lewis acids E(C₆F₅)₃ (E = B, Al) gave the ionic derivatives [NbCp′Me₂X][MeE(C₆F₅)₃] (X = Me 4-E. X = OR; R = SiiPr₃5b-E, 2,6-Me₂C₆H₃5c-E. E = B, Al) and [TaCp^∗Me(OR)₂][MeE(C₆F₅)₃] (R = 2,6-Me₂C₆H₃6-E; E = B, Al). Polymerization of MMA with the aryloxoniobium compound 2c and Al(C₆F₅)₃ gave syndiotactic PMMA in a low yield, whereas the tetramethylniobium compound 1 and the diaryloxotantalum derivative 3 were inactive.     

A novel flocculant of Al(OH)3-polyacrylamide ionic hybrid

A novel flocculant based on hybrid Al(OH)(3)-polyacrylamide (HAPAM) has been synthesized using a redox initiation system ((NH(4))(2)S(2)O(8)-NaHSO(3)) at 40 degrees C in aqueous medium. The HAPAM was characterized by viscometry, IR spectroscopy, TEM, conductivity, and TGA. The flocculation behavior for 0.25 wt% kaolin suspension was evaluated by spectrophotometry and phase contrast microscopy. It was found that an ionic bond exists between Al(OH)(3) colloid and polyacrylamide (PAM) chains in the HAPAM and the flocculation efficiency of HAPAM is much better than that of commercial polyacrylamide (PAM) and PAM/AlCl(3) blend.     

A new application of cerium(IV) ammonium nitrate [(NH4)2Ce(NO3)3] in fullerene chemistry—free-radical alkoxylation of C60 fullerene on reaction with primary alcohols

The reaction of [60]fullerene with primary aliphatic alcohols (ROH, R = Et, Me, Pr) mediated by cerium(IV) ammonium nitrate [(NH₄)₂Ce(NO₃)₃] affords the corresponding alkoxy-derivatives with a hydroxy group, C₆₀(OR)_x(OH) (x = 3, 4) in high yield. The reaction is characterized by a free radical mechanism confirmed by an EPR study of the alkoxy fullerenyl radical (g = 2.0023).     

Effect of high voltage electrical discharges on filtration properties of Saccharomyces cerevisiae yeast suspensions

In the present work the dead-end filtration of Saccharomyces cerevisiae yeast suspensions disrupted by high voltage electrical discharges (HVED treatment) was investigated. The efficiency of disruption was evaluated using conductivity disintegration index of suspension Z (Z = 0–1) and absorbance spectra of supernatant solutions. The electronic microscopy study, particle sizing and measuring of ζ-potential and turbidity were used to characterize variation of the colloidal properties of a yeast suspension during disruption. The HVED treatment was found to cause an effective disruption of yeast cells and extraction of intracellular proteins and other bio-products. The study of filtration revealed suspension filterability deterioration after disruption. It was shown that filtration behaviour of the HVED-processed suspensions was governed by cake formation, the filtrate volume decreased and the cake resistance increased with increase of Z. For high levels of disruption (Z > 0.99), filtration was governed by membrane fouling. The optimal dosage of polycationic flocculant promoted the formation of flocks and accelerated filtration. However, selected flocculant (poly(diallyldimethylammonium chloride)) provoked binding of bio-product and was inappropriate for using as an agent enhancing extraction from disrupted yeast cells.     

Stereocontrol during photo-initiated controlled/living radical polymerization of acrylamide in the presence of Lewis acids

Poly(acrylamide) (PAM) with controlled molecular weight and tacticity was prepared by UV-irradiation-initiated controlled/living radical polymerization in the presence of dibenzyl trithiocarbonate (DBTTC) and Y(OTf)₃. The rapid and facile photo-initiated controlled/living polymerization at ambient temperature led to controlled molecular weight and narrow polydispersity (M_w/M_n = 1.12-1.24) of PAM. The coordination of Y(OTf)₃ with the last two amide groups in the growing chain radical effectively enhanced isotacticity of PAM. The isotactic sequence of dyads (m), triads (mm) and pentads (mmmm) in PAM were 70.32%, 50.95%, and 29.97%, respectively, which were determined by the resonance of methine (CH) groups in PAM under ¹³C NMR experiment. Factors affecting stereocontrol during the polymerization were studied, including the type of Lewis acids, concentration of Y(OTf)₃, and monomer conversion. It is intriguing that the meso tacticity increased gradually with chain propagation and quite higher isotacticity (m = 93.01%, mm = 86.57%) was obtained in the later polymerization stage (conversion 65-85%).     

Redox-active metal(II) complexes of sterically hindered phenolic ligands: Antibacterial activity and reduction of cytochrome c. Part II. Metal(II) complexes of o-diphenol derivatives of thioglycolic acid

The synthesis and physico-chemical characterization of Fe(II) and Mn(II) complexes of 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfanyl]acetic acid (HL^I) and 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfinyl]acetic acid (HL^II) were carried out. The investigation of the molecular and electronic structure of Cu(II), Ni(II), Zn(II), Fe(II) and Mn(II) complexes has been performed within the density functional theory (DFT) framework. The computed properties were compared to the experimental ones, and molecular structures of the compounds were proposed based on the array of spectral data and quantum chemical calculations. Antibacterial activity of the Fe(II) and Mn(II) complexes was evaluated in comparison with Cu(II), Co(II), Ni(II) and Zn(II) complexes and three standard antibiotics; it was found to follow the order: (1) Сu(L^I)₂ > Mn(L^I)₂ > HL^I > Ni(L^I)₂ > Zn(L^I)₂ > Fe(L^I)₂ > Co(H₂O)₂L^I; (2) Cu(L^II)₂ > Сo(L^II)₂ > Ni(L^II)₂ > Mn(H₂O)₂(L^II)₂ > Fe(L^II)₂ > HL^II > Zn(L^II)₂; their reducing ability (determined electrochemically) followed the same order. Spectrophotometric investigation was carried out in order to estimate the rate of the reduction of bovine heart сytochrome c with the ligands and their metal(II) complexes. The complexes Сu(L^I)₂, Mn(L^I)₂ and Co(L^II)₂ with the high reducing ability were found to be characterized by the highest rates of Cyt с reduction. NADPH:cytochrome P450-reductase had no substantial effect on the rate of сytochrome c reduction with HL^I and HL^II ligands.     

Synthesis of novel lipophilic and/or fluorophilic ethers of perfluoro-tert-butyl alcohol, perfluoropinacol and hexafluoroacetone hydrate via a Mitsunobu reaction: Typical cases of ideal product separation

Fluorophilic ethers having the structure RC(CF₃)₂O(CH₂)₃C_nF_2n + 1 are obtained in high yields, when F-tert-butyl alcohol (R = CF₃), F-acetone hydrate (R = O(CH₂)₃C_nF_2n + 1), F-pinacol (R = C(CF₃)₂O(CH₂)₃C_nF_2n + 1) are reacted with 3-perfluoroalkyl-1-propanols (C_nF_2n + 1(CH₂)₃OH, n = 4, 6, 8, 10) in a Mitsunobu reaction (Ph₃P/DIAD [i-PrO₂CN = NCO₂Pr-i]/ether). The parent lipophilic ethers with the structure of (CF₃)₃CO(CH₂)₃C_nH_2n + 1 were prepared analogously using the corresponding fatty alcohols and F-tert-butyl alcohol. To achieve ideal separations, products were transferred to orthogonal phases relative to the other reaction components using fluorous extraction, fluorous solid-organic liquid filtration, or steam-distillation. Selected physical properties including melting and boiling point, together with fluorous partition coefficients of these ethers were determined and the figures obtained were qualitatively analyzed using relevant thermodynamic theories. Some of these ethers are liquids with rather low freezing points and are miscible with fluorocarbon solvents.     

Solubilities of ammonia in basic imidazolium ionic liquids

Solubilities of ammonia in four conventional imidazolium ionic liquids: [C_nmim][BF₄] (n = 2, 4, 6, 8) have been measured. Isothermally fixed temperatures are 293.15, 303.15, 313.15, 323.15 and 333.15 K; the pressure is from 0 to 1.0 MPa. High solubilities of ammonia are found, and it is also found that the solubilities of ammonia increase when the length of cations’ alkyl increases (the ILs have the same anion), that is: [C₈mim]⁺ > [C₆mim]⁺ > [C₄mim]⁺ > [C₂mim]⁺. The solubility data have been correlated by the Krichevisky–Kasarnovsky equation, and then Henry's constants and partial molar volumes of NH₃ at infinite dilution are obtained. The thermodynamic properties such as solution enthalpy (Δ_solH), solution Gibbs free energy (Δ_solG), solution entropy (Δ_solS), and solution heat capacity (Δ_solC_p) of these systems are obtained.     

Potentiometric determination of the 'formal' hydrolysis ratio of aluminium species in aqueous solutions

The ‘formal’ hydrolysis ratio (h = C(OH⁻)_added/C(Al)_total) of hydrolysed aluminium-ions is an important parameter required for the exhaustive and quantitative speciation-fractionation of aluminium in aqueous solutions. This paper describes a potentiometric method for determination of the formal hydrolysis ratio based on an automated alkaline titration procedure. The method uses the point of precipitation of aluminium hydroxide as a reference (h = 3.0) in order to calculate the initial formal hydrolysis ratio of hydrolysed aluminium-ion solutions. Several solutions of pure hydrolytic species including aluminium monomers (AlCl₃), Al₁₃ polynuclear cluster ([Al₁₃O₄(OH)₂₄(H₂O)₁₂]⁷⁺), Al₃₀ polynuclear cluster ([Al₃₀O₈(OH)₅₆(H₂O)₂₆]¹⁸⁺) and a suspension of nanoparticulate aluminium hydroxide have been used as ‘reference standards’ to validate the proposed potentiometric method. Other important variables in the potentiometric determination of the hydrolysis ratio have also been optimised including the concentration of aluminium and the type and strength of alkali (Trizma-base, NH₃, NaHCO₃, Na₂CO₃ and KOH). The results of the potentiometric analysis have been cross-verified by quantitative ²⁷Al solution nuclear magnetic resonance (²⁷Al NMR) measurements. The ‘formal’ hydrolysis ratio of a commercial basic aluminium chloride has been measured as an example of a practical application of the developed technique.     

Redox-active metal(II) complexes of sterically hindered phenolic ligands: Antibacterial activity and reduction of cytochrome c

The synthesis and physico-chemical characterization of Fe(II) and Mn(II) complexes of 4,6-di-tert-butyl-3[(2-hydroxyethyl)sulphanyl]-1,2-dihydroxybenzene (HL^I) and 2-amino-4,6-di-tert-butylphenol (HL^II) were carried out. Antibacterial activity of the Co(II), Fe(II) and Mn(II) complexes was evaluated in comparison with Cu(II) complexes and three common antibiotics; it was found to follow the order: (1) Сu(L^I)₂ > Сo(L^I)₂ > Fe(L^I)₂ ? Mn(L^I)₂ > HL^I; (2) Сu(L^II)₂ > Сo(L^II)₂ > HL^II > Fe(L^II)₂ ? Mn(L^II)₂; and their reducing ability (determined electrochemically) followed the same order. Spectrophotometric investigation was carried out in order to estimate the rate of the reduction of bovine heart сytochrome c with the ligands and their metal(II) complexes. NADPH:cytochrome P450-reductase was found to increase the rate of сytochrome c reduction with HL^I and HL^II ligands, while adrenodoxin in couple with NAD(P)H: adrenodoxin reductase had no substantial effect thereon. It was shown that the reduction of сytochrome c with these compounds cannot be related solely to the facility of their oxidation оr ionization.     

Nickel (II) complexes with β-enaminoketonato chelate ligands: Synthesis, solid-structure characterization and reactivity toward the addition polymerization of norbornene

Based on two β-enaminoketonato ligands [ArNC(CH₃)C(H)C(CF₃)OH] (L₁, Ar = 2,6-Me₂C₆H₃; L₂, Ar = 2,6-i-Pr₂C₆H₃), their mono(β-enaminoketonato)nickel (II) complexes [(ArNC(CH₃)C(H)C(CF₃)O)Ni(Ph)(PPh₃)] (1, Ar = 2,6-Me₂C₆H₃; 3, Ar = 2,6-i-Pr₂C₆H₃) and bis(β-enaminoketonato)nickel (II) complexes [(ArNC(CH₃)C(H)C(CF₃)O)₂Ni] (2, Ar = 2,6-Me₂C₆H₃; 4, Ar = 2,6-i-Pr₂C₆H₃) have been synthesized and characterized. The molecular structures of complex 1, 2 and 4 have been confirmed by single-crystal X-ray analyses. After being activated with methylaluminoxane (MAO) these catalytic precursors 1-4 could polymerize norbornene to afford addition-type polynorbornene (PNB). Interestingly, catalytic activities and PNB productivity were greatly enhanced due to the introduction of strong electron-withdrawing group - trifluoro methyl into the ligands. Catalytic activities, polymer yield, M_w and M_w/M_n of PNB have been investigated under various reaction conditions.     

Hydrothermal synthesis, crystal structure, and magnetic properties of a novel organo-templated iron(III) borophosphate: (C3H12N2)Fe 6(H2O)4[B4P8O32(OH)8]

The organo-templated iron(III) borophosphate (C₃H₁₂N₂)Fe^III ₆(H₂O)₄[B₄P₈O₃₂(OH)₈] was prepared under mild hydrothermal conditions (at 443 K) and the crystal structure was determined from single crystal X-ray data at 295 K (monoclinic, P2₁/c (No. 14), a=5.014(2) Å, b=9.309(2) Å, c=20.923(7) Å, β=110.29(2)°, V=915.9(5) Å³, Z=2, R1=0.049, wR2=0.107 for all data, 2234 observed reflections with I>2σ(I)). The title compound contains a complex inorganic framework of borophosphate trimers [BP₂O₈(OH)₂]⁵⁻ together with FeO₄(OH)(H₂O)- and FeO₄(OH)₂-octahedra forming channels with ten-membered ring apertures in which the diaminopropane cations are located. The magnetization measurements confirm the Fe(III)-state and show an antiferromagnetic ordering at T_N≈14.0(1) K.