Preparation and nonlinear optical properties of novel Y-type polyesters with highly enhanced thermal stability of second harmonic generation

3,4-Di-(2′-hydroxyethoxy)benzylidenemalononitrile (3) was prepared and condensed with terephthaloyl chloride and adipoyl chloride to yield novel Y-type polyesters (4-5) containing 3,4-dioxybenzylidenemalononitrile groups as NLO-chromophores, which constituted parts of the polymer main-chains. The resulting polymers 4-5 are soluble in common organic solvents such as acetone and N,N-dimethylformamide. They showed thermal stability up to 300 °C in thermogravimetric analysis with glass-transition temperatures obtained from differential scanning calorimetry in the range 89-91 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064 nm fundamental wavelength were around 2.47 pm/V. The dipole alignment exhibited high thermal stability even at 10 °C higher than T_g, and there is no SHG decay below 100 °C due to the partial main-chain character of polymer structure, which is acceptable for NLO device applications.     

Synthesis and nonlinear optical properties of novel Y-type polyimides with enhanced thermal stability of dipole alignment

2,3-Bis-(3,4-dicarboxyphenylcarboxyethoxy)-4′-nitrostilbene dianhydride (4) was prepared and reacted with 1,4-phenylenediamine, 4,4′-oxydianiline, 4,4′-diaminobenzanilide and 4,4′-(hexafluoroisopropylidene)dianiline to yield novel polyimides 5-8 containing 2,3-dioxynitrostilbenyl groups as NLO-chromophores, which constituted parts of the polymer backbones. The resulting polyimides 5-8 were soluble in polar solvents such as acetone and DMF. Polymers 5-8 showed a thermal stability up to 300 °C in TGA thermograms with T_g values obtained from DSC thermograms in the range of 135-160 °C. The SHG coefficients (d₃₃) of poled polymer films at the 1064 cm⁻¹ fundamental wavelength were around 5.26 × 10⁻⁹ esu. The dipole alignment exhibited exceptionally high thermal stability even at 30 °C higher than T_g and there was no SHG decay below 170-190 °C due to the partial main chain character of polymer structure, which was acceptable for NLO device applications.     

Acyclic tertiary diamines and 1,4,7,10-tetraazacyclododecane with fluorine-containing β-diketones: Leading to low melting ionic adducts

N,N,N′,N′-Tetramethylmethanediamine (1a), N,N,N′,N′-tetramethylethanediamine (1b), N,N,N′,N′-tetramethyl-1,3-propanediamine (1c), and N,N,N′,N′-tetramethyl-1,6-hexanediamine (1d) were reacted at 25 °C with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione (2a), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedione (2b), 2-thenoyltrifluoroacetone (2c), and 4,4,4-trifluoro-1-(2-furyl)-1,3-butanedione (2d) to form the ionic adducts 3-18. 1,4,7,10-Tetraazacyclododecane (1e) reacted at 25 °C with β-diketones (2a-d) and 1,1,1-trifluoro-2,4-pentanedione (2e) to give ionic solids 19-23 in good yields. Some of the products are liquid at 25 °C and are thermally stable over long liquid ranges as determined by thermal gravimetric analyses. Single-crystal X-ray structure determinations show that compounds 9 and 21 crystallize in the monoclinic space groups P2(1)/c and P2(1)/n, respectively. All the new compounds were characterized by ¹H, ¹⁹F and ¹³C NMR, electrospray MS and/or elemental analyses.     

Synthesis of novel Y-type polyurethane containing azomethine moiety, as non-linear optical chromophore and their properties

3,4-Di-(2′-hydroxyethoxy)-4′-nitrobenzylidene II was prepared by condensation reaction of 3,4-dihydroxy-4′-nitrobenzylidene I with 1-chloro-2-ethanol. Monomer II was reacted with p-phenylene diisocyanate to yield polyurethane containing the non-linear optical chromophore 3,4-di-(2′-hydroxyethoxy)-4′-nitrobenzylidene. Polymer III shows thermal stability up to 300 °C in TGA thermogram. T_g value of the polymer obtained from DSC thermogram was 110 °C. The resulting polyurethane III was soluble in common organic solvents such as acetone, DMF and DMSO. The values of electro optic coefficient d₃₃ and d₃₁ of the poled polymer film were 3.15 × 10 ⁻⁷ and 1.5 × 10 ⁻⁷ esu, respectively.     

Rapid synthesis of optically active poly(amide-imide)s by direct polycondensation of aromatic dicarboxylic acid with aromatic diamines

4,4^′-(Hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine-p-amidobenzoic acid) (2) was prepared from the reaction of 4,4^′-(hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine) diacid chloride with p-aminobenzoic acid. The direct polycondensation reaction of monomer (2) with p-phenylenediamine (2a), 4,4^′-diaminodiphenylsulfone (2b), 2,4-diaminotoluene (2c), 2,6-diaminopyridine (2d), m-phenylene diamine (2e), benzidine (2f), 4,4^′-diaminodiphenylether (2g) and 4,4^′-diaminodiphenyl methane (2h) was carried out in a medium consisting of triphenyl phosphite, N-methyl-2-pyrolidone, pyridine, and calcium chloride. The homogeneous mixture was heated at 220 °C for 1 min under nitrogen. The resulting poly(amide-imide)s (PAIs) having inherent viscosities 0.27-0.78 dl/g were obtained in high yield and are optically active and thermally stable. All of the above polymers were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of this new optically active PAIs are reported.     

Synthesis, crystal structure and non-linear optical properties of boronates derivatives of salicylideniminophenols

The condensation in one step of a series of salicylaldehydes and 2-amino-5-nitrophenol with 1-naphthylboronic acid, 2-naphthylboronic acid, and o-tolylboronic acid to give the corresponding boronates 1a-3a, 1b-3b and 1c-3d, is reported. The X-ray crystal structures of 1a, 2b and 3b allowed determining the α- and β-angle between the stilbene skeleton and the aryl or naphthylboronic fragments; these values are indicative of different conformations for the aryl moieties around the (B-C) boron-carbon bond which could potentially modulate the electronic properties on the boron stilbene compounds. All compounds were characterized by ¹H, ¹¹B and ¹³C NMR spectroscopy, UV, IR and mass spectrometry. Second- and third-order non-linear optical characterizations were also performed by EFISH and THG Maker Fringe techniques, respectively. Compounds 3a-3d containing an -N(Et)₂ donor group gave the best NLO response in second- and third-order.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Synthesis and chemistry of tricyclic cyclopropene-tricyclo[3.2.2.0]nona-2(4),6-diene

The 1,2-bridged tricyclic cyclopropene, tricyclo[3.2.2.0^2,4]nona-2(4),6-diene (1), has been synthesized by the elimination of 2-bromo-4-chlorotricyclo[3.2.2.0^2,4]-non-6-ene (5). Cyclopropene 1 will undergo different isomerizations in ether solution and in neat conditions. Compound 1 rearranged to an anti-Bredt compound 4 via diradical mechanism in ether and tricyclic compound 6 via vinyl carbene mechanism in neat conditions. Compound 1 can be trapped with DPIBF at different temperatures yielding different results: the exo-endo adduct 2 (exo-addition from the view of the cyclopropene and endo-addition from the view of bicyclo[2.2.2]octene) is a sole product at 0°C by slowly addition of methyllithium, and the exo-endo adduct 2, endo-endo adduct 9, anti-Bredt adduct 3, and styrene 8 are isolated at ether refluxing temperature. Styrene 8 is proposed to be formed from endo-endo adduct 9 by diradical mechanism. The chemistry of exo-endo adduct 2 and endo-endo adduct 9 is as well studied. The exo-endo adduct 2 undergoes hydration in trifluoroacetic acid to generate 1,3-cis-diol 11 followed by eliminations of water and formaldehyde to give naphthalene 12. The endo-endo adduct 9 reacts with water in tetrahydrofuran-containing silica gel to yield 1,4-cis-diol 10. Both 9 and 10 react with trifluoroacetic acid to form trans-3-hydroxy trifluoroacetate 13. Compound 13 will undergo hydrolysis and isomerization to generate 1,3-cis-diol 11 in trifluoroacetic acid.     

Synthesis and properties of 4,9-methanoundecafulvenes and their transformation to 3-substituted 7,12-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1H,3H)-diones: photo-induced autorecycling oxidizing reaction toward amines

The synthesis and properties of 4,9-methanoundecafulvene [5-(4,9-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-trione] derivatives 8a,b were studied. Their structural characteristics were investigated on the basis of the ¹H and ¹³C NMR and UV-vis spectra. The rotational barrier (ΔG^‡) around the exocyclic double bond of 8a was found to be 12.55 kcal mol⁻¹ by the variable temperature ¹H NMR measurement. The electrochemical properties of 8a,b were also studied by CV measurement. Furthermore, the transformation of 8a,b to 3-substituted 7,12-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1H,3H)-diones 16a,b was accomplished by oxidative cyclization using DDQ and subsequent ring-opening and ring-closure. The structural details and chemical properties of 16a,b were clarified. Reaction of 16a with deuteride afforded C13-adduct 19 as the single product, and thus, the methano-bridge controls the nucleophilic attack to prefer endo-selectivity. The photo-induced oxidation reaction of 16a and a vinylogous compound, 3-methylcyclohepta[4,5]furo[2,3-d]pyrimidine-2,4(3H)-dione 2a, toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) with the recycling number of 6.1-64.0 (for 16a) and 2.7-17.2 (for 2a), respectively.     

Synthesis of 4-aryl-5,5-dimethyl-5H-1,2,3-triazoles and 4-aryl-3-cyano-5,5-dimethyl Δ-pyrazolines by cycloaddition of 2-diazopropane with iminoethers and propenenitriles

A regiospecific 1,3-dipolar cycloaddition of 2-diazopropane 3 to iminoethers 1a-c, carried out at 0 °C, afforded in two steps the corresponding 4-aryl-5,5-dimethyl-5H-1,2,3-triazoles 5a-c. Under the same conditions, 3-arylpropenenitriles 2a-d led to 3-cyano-5,5-dimethyl Δ¹-pyrazolines 6a-d. Products 4-6 were obtained in good yields (69-85%).     

Hydrogen-bonded networks from η-semiquinone complexes of manganese tricarbonyl

The cationic manganese tricarbonyl complexes containing η⁶-2-methylhydroquinone (2a), η⁶-2,3-dimethylhydroquinone (3a), η⁶-2-t-butylhydroquinone (4a), η⁶-tetramethylhydroquinone (5a) and η⁶-4,4′-biphenol (6a) are readily deprotonated to the corresponding neutral (η⁵-semiquinone)Mn(CO)₃ (2b-6b) and anionic (η⁴-quinone)Mn(CO)₃⁻ (2c-5c) complexes. The X-ray structures of 2b-6b feature strong intermolecular hydrogen bonding interactions that result in the formation of supramolecular organometallic networks. Significantly, the substitution pattern at the semiquinone ring affects the stereochemistry of the hydrogen bonding interactions. NMR spectra of 2b, 3b and 5b reveal dynamic hydrogen bonding in solution.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Thermodynamic and kinetic parameters associated with the fluxional behavior of 2-methyl- and 2,6-dimethyltroponeiron tricarbonyl complexes

The kinetic and thermodynamic parameters for regioisomerisation of 2-methyl- and 2,6-dimethyl-derivatives of tricarbonyl[η⁴-tropone]iron complexes have been studied by ¹H NMR spectrometry over a range of 40 °C. Regioisomerisation of these complexes proceeds by an intramolecular first-order process and results in the almost complete conversion of the less stable complexes (4, 8) to more stable regioisomers (1, 5). The activation energies and half lifes for the conversion (4 → 1) and (8 → 5) were found to be ΔG^#=92 kJ mol⁻¹; τ_1/2=12.8 h, and ΔG^#=107 kJ mol⁻¹; τ_1/2=26.8 h, respectively, at 23 °C. Complex 1 reacts with (1R,2S,5R)-menthol in sulphuric acid solution, followed by neutralisation with sodium carbonate to give a separable mixture of diastereomeric tricarbonyl[(2,3,4,5-η)-(1R^′,2S^′,5R^′)-6-menthyloxy-2-methyltropone]iron complexes, 9 and 10. The corresponding dimethylated complex 5 fails to react under these conditions.     

2,2,6,6-Tetramethylcyclohexanethione S-methylide, a highly hindered thiocarbonyl ylide: two-step cycloadditions

The switching from the concerted 1,3-dipolar cycloaddition to a two-step pathway via zwitterionic intermediates requires a major energy difference between HOMO-LUMO energies of 1,3-dipole and dipolarophile, as well as sterically demanding reactants. In contrast to previously studied models, the title compound 1C, a thiocarbonyl ylide prepared by N₂ extrusion from dihydrothiadiazole 7C at 80 °C, combined with 2,3-bis(trifluoromethyl)fumaronitrile (11) to give a zwitterion (gauche-10); the latter failed to close the thiolane ring by 1,5-cyclization, but formed the seven-membered ketene imine 9C by 1,7-cyclization. X-ray analysis of 9C revealed an angle-deformed cumulated bond system and a transoid relation of the CF₃ groups. The relatively stable 9C allowed ¹⁹F NMR recordings from −90 to +90 °C; temperature-dependent line broadening resulted from equilibration with ≤1% of an unknown isomer. Among various possible angle-strained rate processes, an inversion transoid19?cisoid20 is preferred which involves a topomerization at the CN bond; lateral inversion and rotation are discussed. At 80 °C in solution, ketene imine 9C slowly suffered fragmentation to give trans- and cis-1,2-bis(trifluoromethyl)cyclopropane-1,2-dicarbonitrile (13)+thioketone 6C by intramolecular substitution. The reaction of 1C with ethenetetracarbonitrile furnished a tetracyanothiolane 3C, whereas 1C and dimethyl 2,3-dicyanofumarate ((E)-26) afforded thiolanes of the same trans,cis-ratio as 1C with dimethyl 2,3-dicyanomaleate ((Z)-26); a preceding (E,Z)-equilibration of 26 thwarts mechanistic conclusions. When the solvent contained water or methanol, short-lived ketene imines 4C and 31 were intercepted.     

The cyclopalladation reaction of 2-phenylaniline revisited

2-Phenylaniline reacted with Pd(OAc)₂ in toluene at room temperature for 24 h in a one-to-one molar ratio and with the system PdCl₂, NaCl and NaOAc in a 1 (2-phenylaniline):1 (PdCl₂):2 (NaCl):1 (NaOAc) molar ratio in methanol at room temperature for one week to give the dinuclear cyclopalladated compounds (μ-X)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ [1a (X = OAc) and 1b (X = Cl)] in high yield. Moreover, the reaction between 2-phenylaniline and Pd(OAc)₂ in one-to-one molar ratio in acid acetic at 60 °C for 4 h, followed by a metathesis reaction with LiBr, allowed isolation of the dinuclear cyclopalladated compound (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ (1c) in moderate yield. A parallel treatment, but using monodeuterated acetic acid (DOAc) as solvent in the cyclopalladation reaction, allowed isolation of a mixture of compounds 1c, 1c_d1 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄](μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃] and 1c_d2 (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃}]₂ in moderate yield and with a deuterium content of ca. 60%. 1a and 1b reacted with pyridine and PPh₃ affording the mononuclear cyclopalladated compounds [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(X)(L)] [2a (X = OAc, L = py), 2b (X = Cl, L = py), 3a (X = OAc, L = PPh₃) and 3b (X = Cl, L = PPh₃)] in a yield from moderate to high. Furthermore, 1a reacted with Na(acac) · H₂O to give the mononuclear cyclopalladated compound 4 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(acac)] in moderate yield. ¹H NMR studies in CDCl₃ solution of 2a, 2b, 3a, 3b and 4 showed that 2a and 3a presented an intramolecular hydrogen bond between the acetato ligand and the amino group, and were involved in a dynamic equilibrium with water present in the CDCl₃ solvent; and that the enantiomeric molecules of 2b and 4 were in a fast exchange at room temperature, while they were in a slow exchange for 2a, 3a and 3b. The X-ray crystal structures of 3b and 4 were determined. 3b crystallized in the triclinic space group with a = 9.9170(10), b = 10.4750(10), c = 12.0890(10) Å, α = 98.610(10)°, β = 94.034(10)° and γ = 99.000(10)° and 4 in the monoclinic space group P2₁/a with a = 11.5900(10), b = 11.2730(10), c = 12.2150(10) Å, α = 90°, β = 107.6560(10)° and γ = 90°.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Dimethylthallium(III) complexes with picolinic acid and its hydroxyl derivatives

The reaction of dimethylthallium(III) hydroxide with picolinic acid (Hpic), 3-hydroxypicolinic acid (H₂3hpic) and 6-hydroxypicolinic acid (H₂6hpic) in an aqueous/methanol mixture afforded the complexes [TlMe₂(pic)] (1), [TlMe₂(H3hpic)] (2) and [TlMe₂(H6hpic)] (3), respectively. Complex 3′, [NaTlMe₂(6hpic)₂]_n, was obtained as a minor product from a methanolic solution of 3. Compounds 1–3 were characterized by IR and Raman spectroscopy and, in the cases of 1, 2 and 3′, by single-crystal X-ray diffraction. Complex 3′ is the first example of an H6hpic⁻ heterobimetallic compound to be isolated. The ¹H and ¹³C NMR spectra of 1 and 2 are also discussed.     

Emission of 2-phenylethanol from its β-d-glucopyranoside and the biogenesis of these compounds from [H8] l-phenylalanine in rose flowers

The hydrolysis of 2-phenylethyl β-d-glucopyranoside (3) was found to be partially inhibited by feeding with 2-phenyl-N-glucosyl-acetamidiumbromide (8), a β-glucosidase inhibitor, resulting in a decrease in the diurnal emission of 2-phenylethanol (2) from Rosa damascena Mill. flowers. Detection of [1,1,2,2′,3′,4′,5′,6′-²H₈]-2 and [1,2,2′,3′,4′,5′,6′-²H₇]-2 from R. ‘Hoh-Jun’ flowers fed with [1,1,2,2′,3′,4′,5′,6′-²H₈]-3 suggested that β-glucosidase, alcohol dehydrogenase, and reductase might be involved in scent emission. Comprehensive GC-SIM analyses revealed that [1,2,2,2′,3′,4′,5′,6′-²H₈]-2 and [1,2,2,2′,3′,4′,5′,6′-²H₈]-3 must be biosynthesized from [1,2,2,2′,3′,4′,5′6′-²H₈] l-phenylalanine ([²H₈]-1) with a retention of the deuterium atom at α-position of [²H₈]-1.     

Application and details of photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones and related compounds

As novel methodology for synthesizing the furan ring, a photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones (7a-c) and related compounds 9a-c was accomplished to give 5,10-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1,3H)-dionylium tetrafluoroborates (8a-c⁺·BF₄⁻) and related compounds 2a-c⁺·BF₄⁻, respectively. In the photoinduced oxidative cyclization, the molecular oxygen in air is used as oxidant and the reaction proceeds under mild conditions to give desired products without byproducts, and thus, it is interesting from the viewpoint of the green chemistry. On the reactions of the mono-substituted derivatives 7d,e and 9e,f, the selectivity of the photoinduced cyclizations were reversed as compared with those of the DDQ-promoted oxidative cyclizations. By the NMR monitoring of the reactions of 7a and deuterated compound 7a-D₂ under degassed conditions, the details of the reaction pathway were clarified and rationalized on the basis of the MO calculation by the 6-31G^∗ basis set of the MP2 levels as well.     

Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.