Radical polymerization behavior of 3-(N-2-methacryloyloxyethyl-N,N-dimethyl)ammonatopropanesulfonate in water

The homogeneous polymerization of 3-(N-2-methacryloyloxyethyl-N,N-dimethyl)ammonatopropanesulfonate (MDAPS) with potassium peroxydisulfate (KPS) was kinetically in situ investigated in water by means of FT-near IR spectroscopy. The overall activation energy of the polymerization was calculated to be 16.0 kcal/mol. The initial polymerization rate (R_p) at 40 °C was expressed by R_p=k[KPS]^0.65[MDAPS]^1.0. The presence of alkaline metal salts was observed to accelerate the polymerization. The order of acceleration at 40 °C was CsCl > KCl > NaCl > LiCl when the chloride salts were used. NaCl showed higher acceleration effect than NaF. NaBr and NaI exhibited retardation and inhibition effect, respectively, because of reduction of KPS and its primary radical with bromide and iodide ions. The polymerization of MDAPS with KPS in water in the presence of NaCl at 2.0 mol/l gave R_p=k[KPS]^0.70[MDAPS]^1.4 at 40 °C. The overall activation energy of the polymerization in the presence of NaCl was estimated to be 11.6 kcal/mol being considerably lower value compared with that in its absence. The syndiotacticity of poly(MDAPS) tended to increase with rising temperature and decrease in the presence of NaCl.     

Effects of macromolecular matrix on the process of radical polymerization of ionizable monomers

Radical polymerization of methacrylic acid (MAA) and acrylic acid (AA) in the presence of a positively charged macromolecular matrix was studied. In the presence of a matrix, the rates of polymerization were remarkably increased, especially in high pH region. This suggests that electrostatic interaction between the macromolecular matrix and the growing chains and/or the monomer molecules plays an important role in the process of polymerization reaction. The kinetic orders were greatly influenced by the relative matrix concentration (PC) as follows: for (PC)₀ > [M]₀, R_p = k[M]^0.9 [PC]_0.3 [I]^0.8≤ [M]₀ R_p = k[M]^0.3[PC]⁰[I]^0,8 where [M] and [I] are monomer and initiator concentration, respectively, and k is a constant. The mechanism of the interaction of matrix with monomer and/or growing chains in the process of the propagation is discussed. The complex formed in the matrix polymerization could be easily made into fiber by spinning.     

Metal-Containing Initiator Systems. 30. Vinyl Polymerization Initiated with Bis(ethyl acetoacetato)copper(II) and Maleimide

Some electron-accepting compounds such as maleimide (MIm), maleic anhydride (MAn), and tetracyanoquinodimethane were found to show pronounced accelerating effects on vinyl polymerization initiated with metal chelates. The polymerization of methyl methacrylate (MMA) initiated with bis(ethyl acetoacetato)-copper(II) (Cu(eacac)₂) and MIm was studied kinetically in benzene. The overall activation energy of the polymerization was calculated to be 11.5 kcal/mol. This value was much lower than that (17.6 kcal/mol) for the polymerization of MMA with Cu(eacac)₂ alone. The polymerization rate (R_p) was expressed as R_p =k[MIm]^1/2 [Cu(eacac)₂]^1/2 [MMA] The first-order dependence of R_p on the monomer concentration indicated that the monomer had no participation in the initiation step, in contrast with polymerization in the absence of MIm (where a monomer concentration dependence of 1.4th order was observed). Electronic spectroscopic study revealed that a complex between MIm and Cu(eacac)₂ had been formed. The ligand radical, an acetylcarboethoxymethyl radical, was trapped by 2-methyl-2-nitrosopropane in the reactions of Cu(eacac)₂ with MIm and with MAn in benzene. From these results the mechanism of the initiation of polymerization is discussed.     

Radical polymerization behavior of vinyl phenylsufonylacetate

Vinyl phenylsulfonylacetate (VPSA) was prepared by the reaction of vinyl chloroacetate with sodium benzenesulfinate in acetone in the presence of a phase-transfer catalyst. VPSA showed a high radical homopolymerizability similar to vinyl acetate in spite of the fact that VPSA carries a phenyl group. The polymerization of VPSA with 2,2^′-azobisisobutyrate (MAIB) was kinetically investigated in acetone. The overall activation energy of the polymerization was 27.6 kcal/mol. The polymerization rate (R_p) at 50 °C was expressed by R_p=k[MAIB]^0.67[VPSA]^1.1. Poly(VPSA) showed exothermic (27 °C) and endothermic (57 °C) peaks in its DCS curve, corresponding to crystallization and melting. The tacticity of poly(VPSA) was estimated to be rr=29, mr=49, and mm=22.     

Long-lived polymer radicals. VI. Polymerization of N-methylmethacrylamide with formation of living propagation radicals

The polymerization of N-methylmethacrylamide (NMMAm) with azobisisobutyronitrile (AIBN) was investigated kinetically in benzene. This polymerization proceeded heterogeously with formation of the very stable poly(NMMAm) radicals. The overall activation energy of this polymerization was calculated to be 23 kcal/mol. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.63-0.68[NMMAm]^1?2.5. Dependence of R_p on the monomer concentration increased with increasing NMMAm concentration. From an ESR study, cyanopropyl radicals escaping the solvent cage were found to be converted to the living propagating radicals of NMMAm in very high yields (ca. 90%). Formation mechanism of the living polymer radicals was discussed on the basis of kinetic, ESR spectroscopic, and electron microscopic results.     

Kinetic and ESR studies on the radical polymerization of Di-n-butyl itaconate in benzene

The polymerization of di-n-butyl itaconate (DBI) intiated with AIBN was kinetically investigated in benezene. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.5[DBI]^1.7. The polymerization showed a considerably low overall activation energy of 15.3 kcal/mol. The initiator efficiency of AIBN in this system decreased with increasing DBI concentration, ranging from 0.34 to 0.55°C, which is ascribable to viscosity effect due to the monomer. From an ESR study, the polymerization system was found to involve two kinds of persistent radicals, namely, primary propagating ( III ) and propagating ( I ) radicals. The relative concentration of III to I increased with decreasing monomer concentration. Azo-nitrile initiators such as AVN and ACN similarly produced two persistent radicals, while MAIB, DBPO, and PBO yielded only propagating radical I as persistent. The MAIB-initiated polymerization of DBI was also performed in benzene. Similar kinetic features were observed, that is, a higher dependence of R_p on the DBI concentration and a low overall activation energy (14.4 kcal/mol). The following rate equation was obtained at 50°C:R_p = k[MAIB]^0.5[DBI]^1.6. The initiator efficiency of MAIB decreased with increasing DBI concentration, ranging from 0.32 to 0.53 at 50°C. The concentration of propagating radical I was determined by ESR at 50 and 61°C, from which k_p and k_t were estimated. The k_p value increased with increasing monomer concentration, while the k_t one decreased with the DBI concentration. These values are much lower compared with those of MMA.     

Kinetics of the Copolymerization of Methyl Vinyl Ketone and Acrylamide Initiated by the Adduct of Methyl Vinyl Ketone and Imidazole

N-(Butyl-3-one)imidazole acts as an initiating adduct which is formed in the anionic polymerization of methyl vinyl ketone (MVK) induced by imidazole (Im) and is directly formed from Im and the MVK monomer. The kinetics of the anionic homopolymerization of MVK and acrylamide (AAm) under argon in the presence of the adduct were investigated in tetrahydrofuran (THF). The rate of polymerization for the MVK system is expressed as R_p = k[Adduct] [MVK], where k = 3.1 × 10^?6 L/(mol·s)in THF at 30°C. The overall activation energy, E_a , was found to be 5.34 kcal/mol. The R_p for the AAm system is expressed as R_p = k[Adduct] [AAm], where k = 6.8 × 10^?6 L/(mol·s) in THF at 30°C, with E_a 7.78 kcal/mol. The mechanism of the polymerization induced by the initiator adduct is discussed on the basis of these results.     

Study on the Kinetics of Polymerization of Tributyltin Methacrylate

The kinetics of polymerization of tributyltin methacrylate (TBTM) has been studied in benzene solution in the temperature range 60–75°C in the presence of azobisisobutyronitrile (AIBN). We have obtained the following polymerization rate equation: R _p = K _p [TBTM]^1.5 [AIBN]^0.5. It shows that the dependence of the polymerization rate on the concentrations of the monomer TBTM and the initiator AIBN are 1.5 and 0.5 order, respectively. The activation energy of polymerization was found to be 18.1 kcal/mol. The activation energy for the degree of polymerization is approximately -12.3 kcal/mol.     

Kinetic study on the radical polymerization of 2‐methacryloyloxyethyl phosphorylcholine

Polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) was kinetically investigated in ethanol using dimethyl 2,2′‐azobisisobutyrate (MAIB) as initiator. The overall activation energy of the homogeneous polymerization was calculated to be 71 kJ/mol. The polymerization rate (R_p) was expressed by R_p = k[MAIB]^0.54±0.05 [MPC]^1.8±0.1. The higher dependence of R_p on the monomer concentration comes from acceleration of propagation due to monomer aggregation and also from retardation of termination due to viscosity effect of the MPC monomer. Rate constants of propagation (k_p) and termination (k_t) of MPC were estimated by means of ESR to be k_p = 180 L/mol · s and k_t = 2.8 × 10⁴ L/mol · s at 60 °C, respectively. Because of much slower termination, R_p of MPC in ethanol was found at 60 °C to be 8 times that of methyl methacrylate (MMA) in benzene, though the different solvents were used for MPC and MMA. Polymerization of MPC with MAIB in ethanol was accelerated by the presence of water and retarded by the presence of benzene or acetonitrile. Poly(MPC) showed a peculiar solubility behavior; although poly(MPC) was highly soluble in ethanol and in water, it was insoluble in aqueous ethanol of water content of 7.4–39.8 vol %. The radical copolymerization of MPC (M₁) and styrene (St) (M₂) in ethanol at 50 °C gave the following copolymerization parameters similar to those of the copolymerization of MMA and St; r₁ = 0.39, r₂ = 0.46, Q₁ = 0.76, and e₁ = +0.51. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 509–515, 2000     

Radical polymerization behavior of ethyl ortho-formylphenyl fumarate involving intramolecular hydrogen abstraction

The radical polymerization behavior of ethyl ortho-formyl-phenyl fumarate (EFPF) using dimethyl 2,2′-azobisisobutyrate (MAIB) as initiator was studied in benzene kinetically and ESR spectroscopically. The polymerization rate (R_p) at 60°C was given by R_p = k[MAIB]^0.76[EFPF]^0.56. The number-average molecular weight of poly(EFPF) was in the range of 1600–2900. EFPF was also easily photopolymerized at room temperature without any photosensitizer probably because of the photosensitivity of the formyl group of monomer. Analysis of ¹H? and ¹³C-NMR spectra of the resulting polymer revealed that the radical polymerization of EFPF proceeds in a complicated manner involving vinyl addition and intramolecular hydrogen-abstraction. The polymerization system was found to involve ESR-observable poly(EFPF) radicals under the actual polymerization conditions. ESR-determined rate constant (2.4–4.0 L/mol s) of propagation at 60°C increased with decreasing monomer concentration, which is mainly responsible for the observed low de-pendency of R_p on the EFPF concentration. Copolymerizations of EFPF with some vinyl monomers were also examined. © 1995 John Wiley & Sons, Inc.     

Synthesis characterizations and properties of a new fluoro-maleimide polymer

Novel 4-(4-trifluoromethyl)phenoxy N-phenyl-maleimide (FPMI) was synthesized. The free radical-initiated polymerization of FPMI was carried out in 1,4-dioxane solution using azobisisobutyronitrile as initiator. The monomer was investigated by FTIR, ¹H NMR, ¹³C NMR and elemental analysis, while the polymer was investigated by FTIR, ¹H NMR and ¹³C NMR. The effect of the monomer concentration, initiator concentration and temperature on the rate of polymerization (R_p) was studied. The activation energy of the polymerization was calculated (ΔE = 48.94 kJ/mol). The molecular weight of PFPMI and polydispersity index of the polymer were determined by gel permeation chromatography and were equal to 73,500, 16,700 and 2.27, respectively. The properties of PFPMI, including thermal behavior, thermal stability, the glass transition temperature (T_g = 236 °C), photo-stability, solubility and solution viscosity were studied.     

Polymerization of Acrylamide Initiated by the Redox System Potassium Persulfate/Lactic Acid,Catalyzed by Silver Ions

The aqueous polymerization of acrylamide initiated by the potassium persulfate/lactic acid system catalyzed by Ag⁺ ions has been studied iodometrically over the temperature range from 35 to 50 ± 0.2°C. The rate of polymerization is governed by the expression R_p ∞ [M]^0.8[K₂S₂O₈]^1.0[Ag]^1.0 The deviation from normal kinetics has been studied. A tentative mechanism of initiation is suggested. The overall energy of activation is 5.52 kcal/mol.     

Polymerization of acrylamide initiated by Ce4+/L-cysteine redox system

Summary The polymerization of acrylamide initiated by Ce 4⁴⁺/L-cysteine redox system has been studied at 35 ± 0.2 °C in dark under nitrogen atmosphere. The effect of monomer,L-cysteine, Ce⁴⁺ and sulphuric acid concentration and temperature on the rate of polymerization has been studied. The rate may be expressed by the following equation:R _p [M] [Ce⁴⁺]^0.5 [Cysteine]^0.44 The overall energy of activation is 4.78 kcal/deg/mole in the investigated range of temperature 30–50 °C. Molecular weight of the polymer is independent of catalyst concentration but increases with increasing monomer concentration.     

N－甲基丙烯酰－N＇－嘧啶哌嗪与过硫酸钾引发体系引发的丙烯酰胺聚合

queous solution polymerization of acrylamide (AAm) was demonstrated by using initiation system consisting of N-methacryloyl-N '-pyrimidinopiperazine (MPMP ) and persulfate (KPS). The polymerization rate equation was obtained to beR_p = K_p[MPMP]^1/2 [KPS]^1/2 [AAm]^1.0The overall activation energy for the polymerization was calculated by Arrhenius quation to be Ea= 5.6 KJ/mol. The redox nature for the polymerization was clarified. A super high molecular weight up to 10⁷ of PAAm was obtained by using this initiation system. From the fluorescent analysis, it was confirmed that MPMP not only acted as a component of the redox system, but also entered into the acrylamide polymer chains.     

Polymerizabilities of Several Polar Vinyl Monomers by Imidazole

Polymerizabilities of several polar vinyl monomers in the presence of imidazole (Im) have been studied in CDC1₃ and CD₃OD by NMR spectra. Acrylic acid formed a bimolecular adduct with Im as the initial adduct, while methacrylic acid was not obtained, On the other hand, methyl acrylate, methyl methacrylate (MMA), acrylamide (AAm), and acrylonitrile formed the initial adduct between Im and monomer, respectively. In these monomers, AAm and MMA gave each polymer in tetrahydrofuranat room temperature. The number-average molecular weight ([Mbar]_n) of AAm polymers was determined to be in the range of 1000 to 1500, and the [Mbar]_n of MMA polymers was found to be in the range of 2500 to 4500, The rate of polymerization R_p was expressed by the equations R_p = k[Im][AAm] and R_p = k[Im] [MMA]², respectively. The activation energy E_R was obtained by Arrheniuss's plots as E_R(AAm) = 9.6 kcal/mol and E_R(MMA) = 3.8 kcal/mol. These polymerization mechanisms are discussed on the basis of these results.     

Kinetic and ESR studies on the radical polymerization of α‐n‐(α′‐methylbenzyl) β‐ethyl itaconamates derived from racemic and (s)‐α‐methylbenzylamines

The polymerization of α‐N‐(α′‐methylbenzyl) β‐ethyl itaconamate derived from racemic α‐methylbenzylamine (RS‐MBEI) by initiation with dimethyl 2,2′‐azobisisobutyrate (MAIB) was studied in methanol kinetically and with ESR spectroscopy. The overall activation energy of polymerization was calculated to be 47 kJ/mol, a very low value. The polymerization rate (R_p ) at 60 °C was expressed by R_p = k[MAIB]^0.5±0.05[RS‐MBEI]^2.9±0.1. The rate constants of propagation (k_p ) and termination (k_t ) were determined by ESR. k_p was very low, ranging from 0.3 to 0.8 L/mol s, and increased with the monomer concentration, whereas k_t (4–17 × l0⁴ L/mol s) decreased with the monomer concentration. Such behaviors of k_p and k_t were responsible for the high dependence of R_p on the monomer concentration. R_p depended considerably on the solvent used. S‐MBEI, derived from (S)‐α‐methylbenzylamine, showed somewhat lower homopolymerizability than RS‐MBEI. The k_p value of RS‐MBEI at 60 °C in benzene was 1.5 times that of S‐MBEI. This was explicable in terms of the different molecular associations of RS‐MBEI and S‐MBEI, as analyzed by ¹H NMR. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4137–4146, 2000     

Polymerization of Methyl Methacrylate in the Presence of Imidazole Derivatives. Kinetics and Polymer Structure

The kinetics of the polymerization of methyl methacrylate (MMA) in the presence of imidazole (Im), 2-methylimidazole (2MIm), or benz-imidazole (BIm) in tetrahydrofuran (THF) at 15–40°C was investigated by dilatometry. The rate of polymerization, R_p , was expressed by R_p = k[Im] [MMA]², where k = 3.0 × 10^?6 L²/(mol² s) in THF at 30°C. The overall activation energy, E_a , was 6.9 kcal/mol for the Im system and 7.3 kcal/mol for the 2MIm system. The relation between logR_p and 1 T was not linear for the BIm system. The polymers obtained were soluble in acetone, chloroform, benzene, and THF. The melting points of the polymers were in the range of 258–280°C. The ¹H-NMR spectra indicated that the polymers were made up of about 58–72% of syndiotactic structure. The polymerization mechanism is discussed on the basis of these results.     

SYNTHESIS AND POLYMERIZATION OF ALIPHATIC TERTIARY AMINO-GROUP N-SUBSTITUTED ACRYLAMIDES

Aliphatic tertiary amino-group N-substituted acrylamides, N-acryl-N′-methylpiperazine (AMP)and N-methacryl-N′-methylpiperazine (MAMP) were synthesized directly from N-methylpiperazinewith corresponding acryloyl chlorides and characterized by elementary analysis of their picrates,~1H-NMR, IR and MS. AMP did not polymerize with benzoyl peroxide (BPO), but could poly-merize with lauroyl peroxide (LPO). The rate equation of the polymerization was given as R_P=K_P [AMP]~(1.5)[LPO]~(0.5) and the overall activation energy of this polymerization system was 10.8Kcal/mol. The redox nature of LPO with the monomer itself was suggested. Even though AMP and MAMP hardly proceed the polymerization initiated with BPO, butunder lower concentration would form redox system with BPO to initiate the polymerization of MMAreadily. The rate equation of the polymerization of MMA initiated with MAMP-BPO systemwas given as R_P=K_P [MMA] [MAMP}~(0.5) [BPO]~(0.5) and the overall activation energy was 10.2Kcal/mol. The analysis of the obtained polymers confirmed that MAMP not only initiated the poly-merization of MMA by combining with BPO, but also took part in the polymer chains impartingthem with better biocompatibility.     

Radical heterogeneous polymerization behavior of N‐methyl‐α‐fluoroacrylamide in benzene

The polymerization of N‐methyl‐α‐fluoroacrylamide (NMFAm) initiated with dimethyl 2,2′‐azobisisobutyrate (MAIB) in benzene was studied kinetically and with electron spin resonance. The polymerization proceeded heterogeneously with the highly efficient formation of long‐lived poly(NMFAm) radicals. The overall activation energy of the polymerization was 111 kJ/mol. The polymerization rate (R_p) at 50 °C is given by R_p = k[MAIB]^0.75±0.05 [NMFAm]^0.44±0.05. The concentration of the long‐lived polymer radical increased linearly with time. The formation rate (R_p?) of the long‐lived polymer radical at 50 °C is expressed by R_p? = k[MAIB]^1.0±0.1 [NMFAm]^0±0.1. The overall activation energy of the long‐lived radical formation was 128 kJ/mol, which agreed with the energy of initiation (129 kJ/mol), which was separately estimated. A comparison of R_p? with the initiation rate led to the conclusion that 1‐methoxycarbonyl‐1‐methylethyl radicals (primary radicals from MAIB), escaping from the solvent cage, were quantitatively converted into the long‐lived poly(NMFAm) radicals. Thus, this polymerization involves completely unimolecular termination due to polymer radical occlusion. ¹H NMR‐determined tacticities of resulting poly(NMFAm) were estimated to be rr = 0.34, mr = 0.48, and mm = 0.18. The copolymerization of NMFAm(M₁) and St(M₂) with MAIB at 50 °C in benzene gave monomer reactivity ratios of r₁ = 0.61 and r₂ = 1.79. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2196–2205, 2001     

Sulfur-Containing Vinyl Monomers. XV. Kinetic Study of Radical Polymerization of Vinyl Mercaptobenzothiazole and Its Copolymerization

A kinetic study of radical polymerization of vinyl mercaptobenzothiazole (VMBT) with α,α′-azobisisobutyonitrile (AIBN) at 60°C was carried out. The rate of polymerization (R_p) was found to be expressed by the rate equation: R_p = k[AIBN]^0.5 [VMBT]^1.0, indicating that the polymerization of this monomer proceeds via an ordinary radical mechanism. The apparent activation energy for overall polymerization was calculated to be 20.9 kcal/mole. Moreover, this monomer was copolymerized with methyl methacrylate, acrylonitrile, vinyl acetate, phenyl vinyl sulfide, maleic anhydride, and fumaronitrile at 60°C. From the results obtained, the copolymerization parameters were determined and discussed.