Conducting graft copolymers of poly(3‐methylthienyl methacrylate) with pyrrole and thiophene

A thiophene‐functionalized methacrylate monomer (3‐methylthienyl methacrylate) was synthesized via the esterification of 3‐thiophene methanol with methacryloyl chloride. The methacrylate monomer was polymerized by free‐radical polymerization in the presence of azobisisobutyronitrile as the initiator. Graft copolymers of poly(3‐methylthienyl methacrylate) (PMTM2) and polypyrrole and of PMTM2 and polythiophene were synthesized by constant‐potential electrolyses. p‐Toluene sulfonic acid, sodium dodecyl sulfate, and tetrabutylammonium tetrafluoroborate were used as the supporting electrolytes. PMTM2‐coated platinum electrodes were used as anodes in the polymerization of pyrrole and thiophene. Moreover, the oxidative polymerization of poly(3‐methylthienyl methacrylate) (PMTM1) was studied with FeCl₃ as the oxidant. The self‐polymerization of PMTM1 was also investigated by galvanostatic electrolysis both in dichloromethane and in propylene carbonate. The structures of PMTM1 and PMTM2 were investigated by several spectroscopic and thermal methods. The grafting process was elucidated with conductivity measurements, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy studies. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4131–4140, 2002     

Synthesis, characterization and electrochromic properties of conducting copolymers of 2,3-bis-[(3-thienylcarbonyl)oxy]propyl 3-thiophene carboxylate with thiophene and pyrrole

2,3-bis-[(3-thienylcarbonyl)oxy]propyl 3-thiophene carboxylate (TOPT) was synthesized via the reaction of 3-thionylcarboxylic acid with glycerol, and electrochemically polymerized either with thiophene and pyrrole by using tetrabutylammonium tetrafluoroborate (TBAFB) as the supporting electrolyte in acetonitrile (AN). Characterization of the resulting copolymers was performed via cyclic voltammetry, FTIR, thermal gravimetry analysis (TGA), and scanning electron microscopy (SEM). Electrical conductivities were measured by the four-probe technique. Spectroelectrochemical analysis shows that the copolymer of the monomer with thiophene has an electronic band gap (due to the π-π^∗ transition) of 2.00 eV, with a dark red color in the fully reduced form and a green color in the fully oxidized form. The copolymer exhibited a long-term switching stability up to 1800 double switches.     

Synthesis and characterization of a bifunctional amido-thiophene monomer and its copolymer with thiophene and electrochemical properties

A bifunctional amido-thiophene namely hexamethylene (bis-3-thiophene acetamide) (HMTA) was synthesized by the reaction of 3-thiophene acetic acid with hexamethylene diamine. Copolymerization in the presence of thiophene was achieved electrochemically in tetrabutylammonium tetrafluoroborate/acetonitrile (TBAFB/AN). Spectroelectrochemical analysis of the resulting copolymer [P(HMTA-co-Th)] reflected electronic transitions at 505 nm, 740 nm and ∼1000 nm, revealing π to π* transition, polaron and bipolaron band formation respectively. Switching ability was evaluated by a kinetic study via measuring the transmittance (%T) at the maximum contrast. Dual type polymer electrochromic devices (ECDs) based on P(HMTA-co-Th) and poly(ethylene dioxythiophene) (PEDOT) have been constructed. Spectroelectrochemistry, switching ability and stability of the devices were investigated by UV-vis spectroscopy and cyclic voltammetry. These devices exhibit low switching voltages (between 0.0 V and +1.6 V), short switching times with reasonable switching stability under atmospheric conditions.     

Block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole

Poly(methyl methacrylate) with a thiophene end group having narrow polydispersity was prepared by the Atom Transfer Radical Polymerization (ATRP) technique. Subsequently, electrically conducting block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole were synthesized by using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolysis. Characterization of the block copolymers were performed by CV, FTIR, SEM, TGA, and DSC analyses. Electrical conductivities were evaluated by the four-probe technique. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4218–4225, 1999     

ATRP of methyl methacrylate initiated with a bifunctional initiator bearing bromomethyl functional groups: Synthesis of the block and graft copolymers

This article reports the synthesis of the block and graft copolymers using peroxygen‐containing poly(methyl methacrylate) (poly‐MMA) as a macroinitiator that was prepared from the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in the presence of bis(4,4′‐bromomethyl benzoyl peroxide) (BBP). The effects of reaction temperatures on the ATRP system were studied in detail. Kinetic studies were carried out to investigate controlled ATRP for BBP/CuBr/bpy initiating system with MMA at 40 °C and free radical polymerization of styrene (S) at 80 °C. The plots of ln ([M_o]/[M_t]) versus reaction time are linear, corresponding to first‐order kinetics. Poly‐MMA initiators were used in the bulk polymerization of S to obtain poly (MMA‐b‐S) block copolymers. Poly‐MMA initiators containing undecomposed peroygen groups were used for the graft copolymerization of polybutadiene (PBd) and natural rubber (RSS‐3) to obtain crosslinked poly (MMA‐g‐PBd) and poly(MMA‐g‐RSS‐3) graft copolymers. Swelling ratio values (q_v) of the graft copolymers in CHCl₃ were calculated. The characterizations of the polymers were achieved by Fourier‐transform infrared spectroscopy (FTIR), ¹H‐nuclear magnetic resonance (¹H NMR), gel‐permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), and the fractional precipitation (γ) techniques. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1364–1373, 2010     

Controlled radical polymerization of 2‐hydroxyethyl methacrylate with a hydrophilic ruthenium complex and the synthesis of amphiphilic random and block copolymers with methyl methacrylate

A hydrophilic ruthenium complex with ionic phosphine ligands { 1 : RuCl₂[P(3‐C₆H₄SO₃Na)(C₆H₅)₂]₂} induced controlled radical polymerization of 2‐hydroxyethyl methacrylate (HEMA) in methanol under homogeneous conditions; the initiator was a chloride (R‐Cl) such as CHCl₂COPh. The number‐average molecular weights of poly(HEMA) increased in direct proportion to monomer conversion, and the molecular weight distributions were relatively narrow (M_w/M_n = 1.4–1.7). A similar living radical polymerization was possible with (MMA)₂‐Cl [(CH₃)₂C(CO₂CH₃)CH₂C(CH₃)(CO₂CH₃)Cl] as an initiator coupled with amine additives such as n‐Bu₃N. In a similar homogeneous system in methanol, methyl methacrylate (MMA) could also be polymerized in living fashion with the R‐Cl/ 1 initiating system. Especially for such hydrophobic polymers, the water‐soluble ruthenium catalyst was readily removed from the polymers by simple washing with an aqueous dilute acid. This system can be applied to the direct synthesis of amphiphilic random and block copolymers of HEMA and MMA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2055–2065, 2002     

导电聚吡咯的研究

介绍了1995年获国家自然科学二等奖项目“导电聚吡咯的研究”（主要完成人：钱人元、李永舫、毕先同、裴启兵、鄢宝珍）的主要研究成果以及获奖后的研究新进展,涉及的研究内容包括导电聚吡咯的电化学聚合过程和机理、导电聚吡咯的结构、稳定性、电化学性质以及导电聚吡咯复合材料的制备等。     

Immobilization of invertase in conducting copolymers of 3-methylthienyl methacrylate

Immobilization of invertase in conducting copolymer matrices of 3-methylthienyl methacrylate with pyrrole and thiophene was achieved by constant potential electrolysis using sodium dodecyl sulfate (SDS) as the supporting electrolyte. Polythiophene (PTh) was also used in entrapment process for comparison. Kinetic parameters, Michaelis-Menten constant, K(m), and the maximum reaction rate, V(max), were investigated. Operational stability and temperature optimization of the enzyme electrodes were also examined.     

Synthesis of methyl methacrylate,styrene, and isobutylene multiblock copolymers using atom transfer and cationic polymerization

ABCBA‐type pentablock copolymers of methyl methacrylate, styrene, and isobutylene (IB) were prepared by the cationic polymerization of IB in the presence of the α,ω‐dichloro‐PS‐b‐PMMA‐b‐PS triblock copolymer [where PS is polystyrene and PMMA is poly(methyl methacrylate)] as a macroinitiator in conjunction with diethylaluminum chloride (Et₂AlCl) as a coinitiator. The macroinitiator was prepared by a two‐step copper‐based atom transfer radical polymerization (ATRP). The reaction temperature, ?78 or ?25 °C, significantly affected the IB content in the resulting copolymers; a higher content was obtained at ?78 °C. The formation of the PIB‐b‐PS‐b‐PMMA‐b‐PS‐b‐PIB copolymers (where PIB is polyisobutylene), prepared at ?25 (20.3 mol % IB) or ?78 °C (61.3 mol % IB; rubbery material), with relatively narrow molecular weight distributions provided direct evidence of the presence of labile chlorine atoms at both ends of the macroinitiator capable of initiation of cationic polymerization of IB. One glass‐transition temperature (T_g), 104.5 °C, was observed for the aforementioned triblock copolymer, and the pentablock copolymer containing 61.3 mol % IB showed two well‐defined T_g's: ?73.0 °C for PIB and 95.6 °C for the PS–PMMA blocks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3823–3830, 2005     

Chemical and electrochemical synthesis of homopolymer and copolymers of 3‐methoxyethoxythiophene with aniline,thiophene and pyrrole for studies of their gas and vapour sensing

Herein we report chemical and electrochemical formation of poly(3‐methoxyethoxythiophene) and its copolymers with aniline, thiophene and pyrrole which give highly conducting polymeric materials. These are soluble in common organic solvents in the conducting state. The response mechanism of these compounds, to a selection of gases and vapours, was investigated using two techniques: measurement of conductance and mass changes using a four probe method and X‐ray fluorescence (XRF) device, respectively. Prepared films were exposed to hydrogen halides, hydrogen cyanide, halogens, monochloroacetic acid (MCAA), 1‐3‐5 trichloromethylbenzene (TCMB), methylbenzyl bromide (MBB), bromoacetone (BA) and cyanogen bromide (CB). These gas sensors may have advantages compared to other sensors in their ability to operate at room temperature, low concentration, stability in air, sufficient diffusion and their selectivity. Copyright © 2001 John Wiley & Sons, Ltd.     

Synthesis and characterization of chitosan-g-glycidyl methacrylate with methyl methacrylate

In this work, the properties of chitosan (CTS) and synthetic polymers are combined to produce a novel hybrid synthetic-natural material. Poly(methyl methacrylate) (PMMA) and glycidyl methacrylate (GMA) are reacted with CTS to produce a versatile material for dental filler applications. This process involves the synthesis of CTS-g-GMA that is further reacted with PMMA [(CTS-g-GMA)-g-PMMA]. The chemical structure and physical properties of the resulting materials is analyzed by FTIR, DSC, SEM, NMR and XRD. The results revealed the evidence of strong intermolecular interactions between CTS-g-GMA and PMMA by covalent bonding formation. Thermal stability of the final copolymer [(CTS-g-GMA)-g-PMMA] is higher than its precursor, CTS-g-GMA. Presented results show a simple route to produce natural-synthetic polymers for potentially useful applications.     

Blends of glycidyl methacrylate/methyl methacrylate copolymers with poly(vinylidene fluoride)

Blends of glycidyl methacrylate (GMA)/methyl methacrylate (MMA) copolymers with poly (vinylidene fluoride) (PVDF) were found to be miscible when the GMA content of the copolymer is 35.7 wt % or less. The miscible blends did not phase separate upon heating prior to thermal decomposition. The melting point depression method, based on both the Flory-Huggins theory and the equation of state theory of Sanchez-Lacombe, was used to evaluate interaction parameters for each pair. The magnitude of these parameters appears to be much larger than interaction energies evaluated by other methods. Possible reasons for this are discussed. © 1995 John Wiley & Sons, Inc.     

Synthesis and Characterization of Conducting Copolymers of Bisphenol A-Diglycidyl Ether with Thiophene Side-Groups and Pyrrole

Copolymers of bisphenol A-diglycidyl ether with thiophene side-groups and pyrrole were synthesized by electrochemical polymerization. Bisphenol A-diglycidyl ether with thiophene side-groups (DGEBATh) was obtained from the reaction between bisphenol A-diglycidyl ether (DGEBA) and thiophene-3-acetic acid. The syntheses of copolymers of DGEBATh and pyrrole were achieved electrochemically using three different supporting electrolytes, p-toluene sulfonic acid (PTSA), sodium dodecyl sulfate (SDS) and tetrabutylammonium tetrafluoroborate (TBAFB). Characterizations of DGEBATh and copolymers were performed by combination of techniques including cyclic voltammetry, scanning electron microscopy, gel permeation chromatography, differential scanning calorimetry, ¹H-NMR and FT-IR. The conductivities were measured by the four-probe technique.     

Synthesis of amphiphilic poly(methyl methacrylate‐ b‐ethylene oxide) copolymers from monohydroxy telechelic poly(methyl methacrylate) as macroinitiator

The synthesis of well‐defined poly(methyl methacrylate)‐block‐poly(ethylene oxide) (PMMA‐b‐PEO) dibock copolymer through anionic polymerization using monohydroxy telechelic PMMA as macroinitiator is described. Living anionic polymerization of methyl methacrylate was performed using initiators derived from the adduct of diphenylethylene and a suitable alkyllithium, either of which contains a hydroxyl group protected with tert‐butyldimethylsilyl moiety in tetrahydrofuran (THF) at ?78 °C in the presence of LiClO₄. The synthesized telechelic PMMAs had good control of molecular weight with narrow molecular weight distribution (MWD). The ¹H NMR and MALDI‐TOF MS analysis confirmed quantitative functionalization of chain‐ends. Block copolymerization of ethylene oxide was carried out using the terminal hydroxyl group of PMMA as initiator in the presence of potassium counter ion in THF at 35 °C. The PMMA‐b‐PEO diblock copolymers had moderate control of molecular weight with narrow MWD. The ¹H NMR results confirm the absence of trans‐esterification reaction of propagating PEO anions onto the ester pendants of PMMA. The micellation behavior of PMMA‐b‐PEO diblock copolymer was examined in water using ¹H NMR and dynamic light scattering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2132–2144, 2008     

Synthesis and spectroscopic characterization of symmetrical isoprene–methyl methacrylate diblock copolymers bearing different anthracene derivatives at the junctions

We describe the synthesis and characterization of 1‐(1‐anthryl)‐1‐phenylethylene (1‐An‐E) and 1‐(2‐anthryl)‐1‐phenylethylene (2‐An‐E). These species were used to end cap the living end group of polyisoprene (PI) obtained by anionic polymerization in tetrahydrofuran. The anions generated were used to initiate methyl methacrylate polymerization. In this way, we synthesized two symmetrical PI‐poly(methyl methacrylate) (PMMA) block copolymers each with a single dye at the junction. PI‐An1‐PMMA has an anthracene linked via its 1‐position. PI‐An2‐PMMA has the anthracene linked via its 2‐position. We compare the UV and fluorescence properties of the polymers to model compounds with similar chromophores. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1225–1236, 2003     

Multifunctional ATRP initiators: Synthesis of four‐arm star homopolymers of methyl methacrylate and graft copolymers of polystyrene and poly(t‐butyl methacrylate)

Tetrakis bromomethyl benzene was used as a tetrafunctional initiator in the synthesis of four‐armed star polymers of methyl methacrylate via atom transfer radical polymerization (ATRP) with a CuBr/2,2 bipyridine catalytic system and benzene as a solvent. Relatively low polydispersities were achieved, and the experimental molecular weights were in agreement with the theoretical ones. A combination of 2,2,6,6‐tetramethyl piperidine‐N‐oxyl‐mediated free‐radical polymerization and ATRP was used to synthesize various graft copolymers with polystyrene backbones and poly(t‐butyl methacrylate) grafts. In this case, the backbone was produced with a 2,2,6,6‐tetramethyl piperidine‐N‐oxyl‐mediated stable free‐radical polymerization process from the copolymerization of styrene and p‐(chloromethyl) styrene. This polychloromethylated polymer was used as an ATRP multifunctional initiator for t‐butyl methacrylate polymerization, giving the desired graft copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 650–655, 2001     

Synthesis and characterization of polysiloxane–polyamide block and graft copolymers

The synthesis of copolymers constituted of a central polydimethylsiloxane (PDMS) block flanked by two polyamide (PA) sequences is described. α, ω-diacyllactam PDMS, when used as macroinitiator of lactam polymerization, gives rise to the expected triblock copolymer. Likewise, PDMS-g-PA graft copolymers are obtained from acyllactam containing polysiloxanes. NaAlH₂(OCH₂CH₂OMe)₂ turns out to be the best suited activating agent for the polymerization of ?-caprolactam, in the experimental conditions required for the synthesis of polysiloxane–polyamide copolymers. The nucleophilic species formed by reaction of NaAlH₂(OCH₂CH₂OMe)₂ with ?-caprolactam—2-[bis(methoxyethoxy) aluminumoxy]-1-azacycloheptane sodium—is indeed nucleophilic enough to bring about the growth of PA chains and mild enough to stay inert towards PDMS. © 1993 John Wiley & Sons, Inc.     

Orientation and relaxation in uniaxially stretched styrene-co-methyl methacrylate random copolymers

Orientation and relaxation behavior in uniaxially stretched styrene-co-methyl methacrylate random copolymers was investigated. When compared at a reference temperature T = T_g + constant, orientation of methyl methacrylate units (MMA) decreases while styrene units orientation increases with a decrease in the styrene percentage. This behavior can be related to intermolecular interactions between MMA units and to the stiffness of styrene-MMA units, which do not undergo conformational changes upon stretching. Both monomer units relax the same in a given copolymer and chain relaxation increases when the styrene percentage increases. Orientation relaxation of styrene and MMA units can be reduced to two general relaxation master curves whatever the blend composition, when the results are compared at same monomeric friction coefficient. © 1994 John Wiley & Sons, Inc.     

ATRP of 3-(triethoxysilyl)propyl methacrylate and preparation of “stable” gelable block copolymers

ATRP of a gelable monomer, 3-(triethoxysilyl)propyl methacrylate (TESPMA), mediated by CuBr/N,N,N’,N’’,N”-pentamethyldiethylenetriamine (PMDETA) using ethyl 2-bromoisobutyrate (2-EBiB) as initiator was studied. The results indicate that polymerization follows the first-order kinetic. PolyTESPMA (PTESPMA) is much more stable to moisture which is important for exploring the properties of its block copolymer. A series of PEO-b-PTESPMA block copolymers with different composition were prepared. Self-assembly of PEO-b-PTESPMA has also been explored in a mixture of methanol and water and polymeric vesicles have been obtained. By introducing the gelation catalyst, the block copolymer vesicles can be stabilized by the silica networks.