Swelling and network parameters of crosslinked thermoreversible hydrogels of poly(N-ethylacrylamide)

Samples of Poly(N-ethylacrylamide) (PEA) have been synthesized by free radical polymerization in water using N,N′-methylene bis-acrylamide (BIS) as crosslinker. Hydrogels obtained by swelling them in water, 15 wt% KCl and 1 wt% sodium dodecyl sulphate (SDS) were examined by gravimetric, dimensional and compression-strain measurements to afford values of swelling ratio, polymer-solvent interaction parameters, elastic moduli and effective crosslinking density ν_e. Crosslinking inefficiency is evidenced by the low value (0.23) of ν_e relative to the theoretical crosslinking density ν_t based on the content of BIS in the synthesis. A small but finite extrapolated value of ν_e at ν_t = 0 is indicative of hydrophobic physical interactions. In water at 298 K increasing the content of BIS leads to a decrease in swelling and increases in values of elastic moduli and polymer-water interaction parameter. At a fixed content of BIS the values of ν_e and the elastic moduli exhibit an unusual increase with temperature, the crosslinking thus being thermally reversible. It is proposed that this results from a balance between hydrophobic interaction and breakage of hydrophilic hydrogen bonding. Although KCl in the medium decreases the swelling compared with that in water, the opposite effect occurs on incorporation of SDS, which is assumed to confer some polyelectrolyte character to the PEA chains. The finding, that these two swelling media reduce the values of ν_e and elastic moduli cf the value in water, has not been resolved satisfactorily.     

Synthesis of photochromic diarylethene polymers for a write-by-light/erase-by-heat recording system

A functionalized styrene monomer (1a) having a photochromic diarylethene chromophore with functional properties of photocoloration, photostability of the colored state, and thermal erasion by heating was synthesized, and the polymer and copolymers of 1a were prepared by radical polymerization and copolymerization. Their polymers exhibited excellent photocoloration and rapid thermal bleaching above 150 °C in solution and in the solid state as well as the performance of the monomeric diarylethene chromophore. In addition, the colored state has a high photostability under visible room light. The diarylethene homopolymer had a glass transition temperature (T_g) as high as polystyrene. The copolymer of 1a with N-1-adamantylmaleimide exhibited extremely high T_g above 200 °C with keeping the photofunctional performance. Such photochromic polymer and copolymers with high T_g can be potentially applied to rewritable display materials and image recordings by a write-by-light/erase-by-heat system.     

Crosslinking and characterization of commercially available poly(VDF-co-HFP) copolymers with 2,4,4-trimethyl-1,6-hexanediamine

Fluorinated copolymers are well known for their large range of applications. These applications can be improved by grafting or crosslinking of several agents. The mechanism of crosslinking of hexamethylene diamine and 2,4,4-trimethyl-1,6-hexanediamine is well known and occurs in four different steps. To elaborate a film of commercially available poly(VDF-co-HFP) copolymer crosslinked by 2,4,4-trimethyl-1,6-hexanediamine, a step of press cure under air is necessary. Temperature, time and pressure were optimised by regarding the solubility of the press cured films, the mechanical properties, the swelling rate in methyl ethyl ketone, and the degradation of the films. The best temperature, time and pressure for press cure were 150 °C, from 15 to 30 min, and 20 bars, respectively. Other properties of crosslinked poly(VDF-co-HFP) copolymers containing 10 mol.% and 20 mol.% of HFP were characterized. First, all films were insoluble in concentrated HCl. Secondly, swelling rates of different amounts of diamine crosslinked copolymers were measured in ethylene carbonate/dimethyl carbonate and in methyl ethyl ketone; it was proved that the higher the molar percentage of diamine, the higher the crosslinking density, so the lower the swelling rate. Concerning thermal properties, glass transition temperature mainly increased when the amount of diamine increased. Thermal stability measurements showed a higher decomposition temperature when the percentage of diamine was very low (5 mol.%). Finally, mechanical properties were measured by dynamic mechanical analysis; the storage tensile modulus (E′) of a diamine crosslinked Kynar^® copolymer versus temperature exhibited a high drop because Kynar^® was a highly amorphous copolymer. Moreover, the higher the amount of diamine, the higher the rubbery modulus.     

Swelling and Network Parameters of 1-Hexadecene-Co-Trimethylolpropane Distearate Monoacrylate Sorbers

Linear and crosslinked copolymers with different compositions of 1-hexadecene and trimethylolpropane distearate monoacrylate monomers were synthesized and evaluated for oil-absorbency application. Different concentrations of ethylene glycol diacrylate (EGDA) and ethylene glycol dimethacrylate (EGDMA) crosslinkers were used. The concentration of both crosslinkers was varied from 0.5% to 2%. Copolymer compositions were determined from ¹H NMR spectroscopy. Monomer reactivity ratios were calculated using Fineman-Ross and Kelen-Tudos techniques at low conversions. The oil absorbency and swelling rate constant were measured and influenced mainly by the degree of crosslinking and the hydrophobicity of copolymer units. The final equilibrium oil content, volume fraction of polymer and swelling capacity were determined at 298 K. The effective crosslinking density V_e, theoretical crosslink density V_t, the average molecular weight between the crosslinks M_c and the polymer-toluene interaction parameter χ were determined from swelling measurements. The efficiencies of EGDA and EGDMA crosslinking agents toward copolymers were determined.     

Thermal and rheological behaviour of some random aromatic polyethersulfone/polyetherethersulfone copolymers

The thermal and rheological behaviour of seven random Cl-ended aromatic PES/PEES copolymers (M_n ≈ 9500 g mol⁻¹), at various PES/PEES repeating unit ratios, was studied. The glass transition temperatures (T_g), determined by DSC experiments, showed a dependence on copolymer composition significantly different from the ideal linear behaviour expected on the basis of Fox equation. Degradations were carried out in the scanning mode, under flowing nitrogen, in the temperature range 35-650 °C and a single degradation stage was observed for all copolymers. The initial decomposition temperatures (T_i) and the half decomposition temperatures (T_1/2) were directly determined by TG curves, while the apparent activation energies of degradation (E_a) were obtained by the Kissinger method. In addition, the complex viscosity (η^∗) of molten copolymers was determined in experimental conditions of linear viscoelasticity. T_i, T_1/2, E_a, and η^∗ values were depending on copolymer composition, showing a trend similar to that of T_g values. The results obtained were discussed and interpreted.     

Mechanical and thermal properties of perfluoroalkyl ethyl methacrylate-methyl methacrylate statistical copolymers synthesized in supercritical carbon dioxide

Poly(methyl methacrylate-ran-perfluoroalkyl ethyl methacrylate) copolymers having varying perfluoroalkyl ethyl methacrylate ester (Zonyl-TM) contents were synthesized in supercritical CO₂. Complete amorphous structures of the copolymers were verified by XRD. Young's modulus (Y_mod) of the copolymers was decreased linearly from 1.57 to 1.08 GPa and T_g values from 102 to 77 °C with the increase of Zonyl-TM content. A linear relationship between the Y_mod and the T_g values of the copolymer was also found. The increase of the large branched pendant groups resulted in the increase of the free volume and a corresponding decrease in Y_mod and T_g of the copolymers. A good fit was found when the Schneider equation was used. Negative deviation from the Gordon-Taylor equation was observed when Zonyl-TM content was lower than 14% due to rapid increase in free volume and then a positive deviation was found due to the dipole-dipole interactions between the methyl ester and fluoroalkyl ester groups.     

Preparation of 4(5)-vinylimidazole-co-acrylic acid copolymer and thermal performances related to applicability as PEM fuel cells

A series of acrylic acid and 4(5)-vinylimidazole copolymers for a non-hydrous proton transferring membrane used in polymer electrolyte membrane for fuel cell (PEMFC) are reported. The feed ratio of each monomer results in the variation of copolymer as evaluated by Fourier transform infrared spectroscopy (FTIR), and nuclear magnetic resonance spectroscopy (¹H-NMR). Differential scanning calorimeter and thermal gravimetric analyzer confirm the thermal properties of copolymer films with T_g at 105-177 °C and T_d above 230 °C. The simultaneous analysis of wide angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) suggests the thermal performance about the decrease in domain size as a consequence of the loss of moisture content in the membrane and the increase in domain size as a consequence of chain mobility after T_g. The proton conductivities under anhydrous condition of the copolymer membranes are in the range of 10⁻² S/cm even up to 120 °C.     

Sustainable self‐healing elastomers with thermoreversible network derived from biomass via emulsion polymerization

Motivated by the growing demand for greener and sustainable polymer systems, self‐healing elastomers were prepared by emulsion polymerization of terpene and furfural‐based monomers. Both the method and the monomers were green and sustainable. The synthesized copolymers showed molecular weights between 59,080 and 84,210 Da and glass‐transition temperature (T_g) between ?25 and ?40 °C, implying rubbery properties. A set of one‐dimensional (1D) and two‐dimensional (2D) NMR spectroscopy supported the formation of the copolymer and nuclear spin–spin coupling in the copolymer. Reactivity ratios were determined by conventional linear method. A thermoreversible network was achieved for the first time by reacting the furan‐based polymer with bismaleimide (BM) as a crosslinker, via a Diels?Alder (DA) coupling reaction. The reversible nature of the polymer network was evidenced from infrared and NMR spectroscopy. The thermoreversible character of the DA crosslinked adduct was confirmed by applying retro‐DA reaction (observed in differential scanning calorimeter [DSC] analysis) and mechanical recovery was verified by repeated heating and cooling cycles. The network polymers displayed excellent self‐healing ability, triggered by heating at 130 °C for 4–12 h, when their scratched surface was screened by microscopic visualization. The healing efficiency of the crosslinked DA‐adduct was calculated as 78%, using atomic force microscopy. This work provides a green and efficient approach to prepare new green and functional materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 738–751     

Synthesis and properties of phthalonitrile-terminated oligomeric poly(ether imide)s containing phthalazinone moiety

Three novel series of soluble and curable phthalonitrile-terminated oligomeric poly(ether imide)s containing phthalazinone moiety were synthesized from an excess amount of three dianhydrides and phthalazinone-based diamine, followed by reacting with 4-(3-aminophenoxy)phthalonitrile (APPh) in a two-step, one-pot reaction, respectively. The phthalonitrile oligomers containing phthalazinone moiety were cured in the presence of 4,4′-diaminodiphenylsulfone (DDS). The oligomers and the crosslinked polymers were characterized by DSC, FT-IR and elemental analysis. These phthalonitrile oligomers containing phthalazinone groups were found to be soluble in some aprotic solvents, such as chloroform, pyridine, m-cresol and N-methyl-2-pyrrolidone (NMP). The crosslinked polymers were insoluble in all solvents. The thermal properties of the oligomers and the crosslinked polymers were evaluated using DSC and TGA analysis. The phthalonitrile oligomers showed high glass transition temperatures (T_gs) in the range of 214-256 °C and high decomposition temperatures with 10% weight loss (T_d10%) ranging from 523 to 553 °C. The crosslinked polymers showed excellent thermal stability with the 10% weight loss temperatures ranging from 543 to 595 °C, but did not exhibit a glass transition temperature upon heating to 350 °C.     

Kinetic aspects of the Diels-Alder reaction between poly(styrene-co-furfuryl methacrylate) and bismaleimide

The crosslinking Diels-Alder reaction between styrene-furfuryl methacrylate copolymer samples (poly(ST-co-FM)) and bismaleimide (BM) at 25 °C in chloroform was studied by following the decay in UV absorbance of the maleimide (MI) group at 320 nm. Reaction conditions were changed by using copolymers with different mole fraction of FM, F_FM, and by employing different initial molar ratios of reactants (furan group within FM and MI group within BM). Second order kinetics were obeyed. ¹³C NMR spectra showed that, even when all reactants had been converted to an insoluble crosslinked network, unreacted MI groups remained, presumably in the form of singly reacted pendant BM molecules. The fractions of MI groups remaining unreacted were found to be 0.49, 0.34 and 0.22 for FM:MI mole ratios in the initial mixture of 2, 1 and 0.5 respectively, when using a copolymer of F_FM=0.1354. An attempt was also made to follow the kinetics of network formation by ¹³C NMR spectroscopy, using the peak areas for reacted and unreacted MI and FM groups, but many of the findings were subject to some uncertainty for reasons, which are discussed. However, because the peak areas were considered reliable for unreacted MI groups, the rate constant, k, was evaluated, thereby. Overall using UV and NMR the values of k lay within the interval (0.8-3.6) × 10⁻⁵ dm³ mol⁻¹ s⁻¹.     

One-pot, novel chemical modification of glycidyl methacrylate copolymers with very bulky organosilicon side chain substituents

Glycidyl methacrylate (GM) random copolymers with styrene and methylstyrene (in a 1:1 and 1:3 mole ratio) were synthesized by solution free radical polymerizations at 70 ± 1 °C using α,α′-azoisobutyronitrile as an initiator. The copolymer compositions were obtained using related ¹H NMR spectra and the polydispersity indices of the copolymers determined using gel permeation chromatography (GPC). Both types of polymer could be modified by incorporation of the highly sterically demanding tris(trimethylsilyl)methyl substituent (Me₃Si)₃C-(Tsi = trisyl) through the ring opening reaction of the epoxy groups in copolymers. Chemical modification was determined by ¹H NMR and infrared spectroscopies. The glass transition temperature T_g of all copolymers was determined by differential scanning calorimetry (DSC). The T_g value of the copolymers containing bulky trisyl groups was found to increase with incorporation of trisyl groups in polymer structures. The presence of trisyl groups in the polymer side chain created new macromolecules with novel modified properties and potential use as membranes for fluid separation.     

Effects of composition on the water uptake and hydroplasticisation of the glass transition temperature of methacrylate copolymers

The effects of composition on the glass transition of dry and hydroplasticised copolymers of methyl methacrylate (MMA), butyl methacrylate (BMA) and 2-hydroxypropyl methacrylate (HPMA) were studied by differential scanning calorimetry. Results from the hydroplasticisation studies showed that a high PHPMA content (>75 wt.%) was required for high water absorption and that the amount of water uptake was not linear with HPMA content but increased in an accelerating manner with increasing HPMA content. This behaviour was attributed to the increase in the hydrophilic character of the copolymer due to the strong hydroxyl-hydroxyl interactions at high PHPMA content. The T_gs of the dry copolymers were successfully predicted by all three equations used (rule of mixtures, Fox and Gordon-Taylor) but were poorly predicted for the hydroplasticised copolymers. This failure was attributed to the inadequacy of the equations in accounting for the specific interactions between the different segments of the copolymer chains. HPMA depressed the T_g of the water-saturated copolymers but enhanced the T_g of the dry system and this behaviour has particular relevance to its use in water-based latex paints.     

Synthesis and swelling behavior of thermosensitive hydrogels based on N-substituted acrylamides and sodium acrylate

A series of hydrogels based on N-isopropylacrylamide, sodium acrylate, and N-tert-butylacrylamide were synthesized by free radical polymerization in a mixture of dioxane and water with tetra(ethylene glycol) diacrylate as the crosslinker and benzoyl peroxide as the initiator. The swelling behavior including the swelling rate of the crosslinked gels in water was studied with gravimetric method. The swelling ratio of the gel (0.1 mol% crosslinking) can reach 420 g/g at 20 °C and such a gel can release 96% of the water absorbed at 40 °C. The lower critical swelling temperature (LCST) of the copolymers can be adjusted by changing the chemical composition of the polymers. Such crosslinked gels can be potentially used as thermosensitive superabsorbent because of their high water uptake and thermal sensitivity.     

Copolymerization of ethylene and non-conjugated diene using homogenous catalyst

Ethylene and different amounts of 1,7-octadiene were copolymerized using the metallocene catalyst system ethylidene-bis(fluorenyl) zirconium dichloride and methylaluminoxane (MAO) at both 50 and 90 °C. The catalyst activity has slightly increased with the addition of low amounts of the diene in relation to the homopolymerization of ethylene. The obtained polymers were characterized according to their melting temperature (T_m) and crystallinity degree (x_c) by differential scanning calorimetry (DSC). Weight-average molecular weight (M_w) and polydispersity were determined by gel permeation chromatography (GPC). Diene contents in the copolymer were obtained through the FTIR spectroscopy. The results indicated that at polymerization temperature of 90 °C, crosslinking bonds in the obtained copolymers were low, differently from what was observed at 50 °C. The diene content in the copolymer achieved more than 3 mol% and the comonomer conversion was around 15%. Moreover, the obtained copolymers have M_w around 100,000 and large polydispersity.     

Network and thermodynamic properties of hydrogels of poly[1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine]

Samples of poly[1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (PSPV) have been synthesized to high conversion by free radical polymerization in aqueous solution of the zwitterionic monomer SPV with several concentrations of the crosslinker N,N′-methylene-bis-acrylamide (MBA). Hydrogels obtained by swelling them in water and aqueous KSCN solution were examined by gravimetric and dimensional analysis, and by compression-strain measurements. The derived effective crosslinking density ν_e was only ca. 11% of the theoretical value, indicating low efficiency of chemical crosslinking by MBA. At 298 K increasing content of MBA produces increases in the values of ν_e, elastic moduli and polymer-water interaction parameter χ. At a fixed MBA content, increasing temperature led to decreases in the values of ν_e, elastic moduli and χ, but an increase in water content of hydrogel. For swelling in aq. KSCN solution the mechanical properties are insensitive to content of salt. Experimental and theoretical analysis afforded values of the water/polymer, salt/water and salt/polymer interaction parameters. Where appropriate the findings are compared with those reported for a different zwitterionic hydrogel and a neutral non-zwitterionic hydrogel.     

Modification of poly(vinyl alcohol) with acid chlorides and crosslinking with difunctional hardeners

The reaction of acid chlorides with poly(vinyl alcohol) (PVA) leads to vinyl alcohol-vinyl ester copolymers. The esterification by Schotten-Baumann enables degrees of modification to be reached which depend on the chemical structure of the pendant unit introduced. High degrees of modification were obtained in the reaction with water-stable acid chlorides such as benzoyl or cinnamoyl chloride. The copolymers obtained were characterized by spectroscopic techniques, elemental analysis, thermal methods, and viscosity determinations. Since in all cases they were only partially modified, the remaining hydroxyl groups were reacted with difunctional hardeners, Epiclon B-4400, hexamethylene diisocyanate, and tolylene 2,4-diisocyanate, to obtain tridimensional networks. Vinyl alcohol-vinyl benzoate copolymers with different degrees of modification were crosslinked to study how the percentage of remaining hydroxylic groups affects the crosslinking process. The exotherm maximum of the curing process was lower when diisocyanates were used as hardeners and the degree of crosslinking was higher when hexamethylene diisocyanate was used according to the observed increase in T_g values. Whereas the TGA curves of linear polymers only showed one degradation, in crosslinked polymers two degradation steps were detected, suggesting several degradation mechanisms. © 1996 John Wiley & Sons, Inc.     

Gel strength and swelling of acrylamide‐protic acid superabsorbent copolymers

The viscoelastic and swelling properties of polyacrylamide‐based superabsorbent copolymers were investigated as a function of the ionic comonomer structure. Superabsorbent copolymers were synthesized by free‐radical crosslinking copolymerization of acrylamide and one of the monoprotic acids (acrylic acid and crotonic acid) or the diprotic acids (maleic acid and itaconic acid) as the investigated ionic comonomer. The reaction composition of all components, i.e. monomer, comonomer, initiator, co‐initiator, and crosslinker, was fixed to be the same for the synthesis of all four superabsorbent copolymer systems. Viscoelastic measurements were performed in all systems where the particles were closely packed. The network structures of all systems were evaluated via viscoelastic and swelling measurements. The results indicated that superabsorbent polymers (SAPs) with high water absorbency were accompanied by low gel strength and the calculated high value of molecular weight between crosslinks ($\bar {M}{}_c$ ) and low value of effective crosslinking density (ν_e). Diprotic acid‐containing SAPs showed higher water absorbency over monoprotic acid‐containing and non‐ionic ones. The differences in $\bar {M}{}_c$ and ν_e values of each system were explained with respect to the differences in the monomer reactivity ratio and hydrophilicity of the comonomers. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermal and rheological behaviours of some random aromatic amino-ended polyethersulfone/polyetherethersulfone copolymers

The thermal and rheological characterizations of seven random, low molecular weight (M_n ≅ 9500 g mol⁻¹), H₂N-ended polyethersulfone/polyetherethersulfone (PES/PEES) copolymers, at various PES/PEES ratios, were performed. The glass transition temperatures (T_g) were determined by DSC. Degradations were carried out in a thermobalance, under flowing nitrogen, in dynamic heating conditions from 35 °C to 650 °C. The initial decomposition temperatures (T_i) and the half decomposition temperatures (T_1/2) were directly determined by TG curves, while the apparent activation energies of degradation (E_a) were obtained by the Kissinger method. In addition, the complex viscosities (η^∗) of the molten polymers were determined in experimental conditions of linear viscoelasticity. T_g, E_a and η^∗ values increased linearly with PES% content, while T_i and T_1/2 values showed opposite behaviour. In every case both PES and PEES homopolymers felt outside linearity. The results obtained are discussed and interpreted, and compared with those of corresponding Cl-ended copolymers previously studied.     

Breadth of glass transition temperature in styrene/acrylic acid block,random, and gradient copolymers: Unusual sequence distribution effects

Block, random, and gradient copolymers of styrene (S) and acrylic acid (AA) are synthesized by conventional or controlled radical polymerization, and their glass transition temperature (T_g) behaviors are compared. The location and breadth of the T_gs are determined using derivatives of differential scanning calorimetry heating curves. Each S/AA random copolymer exhibits one narrow T_g, consistent with a single phase of limited compositional nanoheterogeneity. Block copolymers exhibit two narrow T_gs originating from nanophase separation into ordered domains with nearly pure S or nearly pure AA repeat units. Each gradient copolymer exhibits a T_g response with a ～50–56 °C breadth that extends beyond the upper T_g of the block copolymers. For copolymers of similar composition, the maximum value in the gradient copolymer T_g response is consistent with that of a random copolymer, which has an enhanced T_g relative to poly(acrylic acid) due to more effective hydrogen bonding when AA units are separated along the chain backbone by S units. These results indicate that gradient copolymers with ordered nanostructures can be rationally designed, which exhibit broad glass transitions that extend to higher temperature than the T_gs observed with block copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2842–2849, 2007     

Incorporation of polydimethylsiloxane into polyurethanes and characterization of copolymers

Novel copolymers of polyurethane (PU) were prepared by direct transurethanetion reaction of a commercial PU with polydimethylsiloxanes (PDMS, MW 1000, 5000, and 10,000) containing hydroxyl end-groups. Transurethanetions with different mass ratios of hydrophobic PDMS to hydrophilic PU chains (PDMS1000–PU: 43:57, 67:33, 71:29, and 80:20; PDMS5000–PU: 37:63, and 51:49; PDMS10000–PU: 51:49) were carried out in solution at 65 and 100 °C. In catalyzed reactions, dibutyltin dilaurate (SnC₃₂H₆₄O₄) was used to promote bond breaking in the PU chain and accelerate the reaction between hydroxyl end-groups of PDMS and regenerated isocyanates of PU. The chemical structures of the prepared copolymers were comprehensively characterized by ¹H, ¹³C, and ²⁹Si NMR spectroscopies. According to elemental analysis, the content of PDMS varied between 3 wt.% and 16 wt.%, and results obtained from the ¹H NMR spectroscopy were in good agreement with the results of elemental analysis. Increased length of the hydrophobic chain increased the content of PDMS in the copolymer. The GPC results showed that molar masses of the PUPDMS copolymers were lower than the molar mass of the starting PU. The glass transitions (T_g) of the copolymers were shifted to lower temperature as compared with T_g of the starting polyurethane. ATR FTIR spectroscopy showed the surface of the copolymer films to be enriched with siloxane groups and, according to electron microscopy, it was textured with microspheres. The static contact angles for copolymer films measured with deionized water ranged from 94° to 117°. The different structural, thermal and surface properties of the PUPDMS copolymers as compared with PU indicated that transurethanetion had taken place.