Hole-transporting [3,3′]bicarbazolyl-based polymers and well-defined model compounds

Polymers containing bicarbazolyl moieties in the main chain have been synthesized by the modified Ullmann coupling reaction from 9H,9′H-[3,3′]bicarbazolyl and different dihalo derivatives. The number-average molecular weights of the polymers synthesized were in the range of 2500-6200 with a molecular weight distribution of 1.6-3.1. Well-defined model compounds for the polymers have been synthesized by stepwise reactions. All these compounds have been found to form glasses with glass transition temperatures in the range of 57-119 °C as characterised by differential scanning calorimetry. The electron photoemission spectra of the compounds have been recorded and the ionisation potentials of 5.35-5.4 eV have been established. Room temperature hole drift mobility of the synthesized compounds molecularly dispersed in a polymer host range from 10⁻⁶ to 3 × 10⁻⁵ cm²/V s at an electric field of 10⁶ V/cm at the room temperature.     

Aromatic polyamides with pendent acetoxybenzamide groups and thin films made therefrom

New aromatic polyamides containing 1,3,4-oxadiazole or benzonitrile units in the main chain and 5-(4-acetoxybenzamido) groups in the side chain have been synthesized and their properties have been characterized and compared with those of related polyamides and polyoxadiazole-amides. These polymers show good thermal stability, with initial decomposition temperature being at about 300 °C and glass transition temperature in the range of 260-280 °C. They are easily soluble in certain solvents such as N-methylpyrrolidinone (NMP), N,N^′-dimethylacetamide (DMA) and N,N^′-dimethylformamide (DMF) and can be cast from solutions into thin flexible films. The polymer films had tensile strengths in the range of 77-97 MPa, tensile moduli in the range of 2.3-2.6 GPa and elongation at break values ranging from 6% to 24%. One of the polymers containing the 1,3,4-oxadiazole ring exhibited blue fluorescence.     

Novel thermally stable and chiral poly(amide-imide)s bearing from N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid: Synthesis and characterization

Novel optically active aromatic poly(amide-imide)s (PAIs) were prepared from newly synthesized N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid (3) via polycondensation with various diamines. The diacid was synthesized by the condensation reaction of 3,3′,4,4′-biphenyltetracarboxylic dianhydride (1) with l-isoleucine (2) in a mixture of acetic acid and pyridine (3:2 v/v). All the polymers were obtained in quantitative yields with inherent viscosities of 0.20-0.43 dL g⁻¹. All the polymers were highly organosoluble in solvents like N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), tetrahydrofuran, γ-butyrolactone, cyclohexanone and chloroform at room temperature or upon heating. These poly(amide-imide)s had glass transition temperatures between 198 and 231 °C, and their 10% weight-loss temperatures were ranging from 368 to 398 °C and 353 to 375 °C under nitrogen and air, respectively. The polyimide films had tensile strengths in the range of 63-88 MPa and tensile moduli in the range of 0.8-1.4 GPa. These poly(amide-imide)s possessed chiral properties and the specific rotations were in the range of −3.10° to −72.92°.     

Synthesis and characterization of novel polybenzimidazoles containing 4-phenyl phthalazinone moiety

A novel series of homo- and copoly(phthalazinone benzimidazole)s were synthesized from various stoichiometric mixtures of 4-(4-(4-(4-carboxyphenoxy)phenyl)-1-oxophthalazin-2(1H)-yl)benzoic acid (CPPBC) and isophthalic acid (IPA) with 3,3′-diaminobenzidine (DAB) by solution polycondensation in polyphosphoric acid (PPA). The structures of the obtained polymers were characterized by FT-IR and ¹H NMR. The obtained polybenzimidazoles were found to be soluble in aprotic polar solvents such as N-methyl-2-pyrolidinone (NMP), N,N-dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO) and m-cresol, without the addition of inorganic salts. The inherent viscosities of the polybenzimidazoles were in the range of 1.10–2.05 dL/g. All of the polymers show amorphous nature as evaluated by WAXD. These polymers have high glass transition temperatures (T_gs) in the range of 398–408 °C. Thermogravimetric analysis exhibit that these polybenzimidazoles containing 4-phenyl phthalazinone moiety have excellent thermal stability with the temperatures for 5% and 10% weight loss of the polymers ranging from 516 to 594 °C and 560 to 672 °C, respectively.     

Sulfide and sulfoxide based poly(ether-amide)s: Synthesis and characterization

Two new diacid monomers, 2,2′-sulfide bis(4-methyl phenoxy acetic acid) and 2,2′-sulfoxide bis(4-methyl phenoxy acetic acid) were successfully synthesized by refluxing the 2,2′-sulfide bis(4-methyl phenol) and 2,2′-sulfoxide bis(4-methyl phenol) with chloroacetonitrile in the presence of potassium carbonate, and subsequent basic reduction. Two novel series of poly(sulfide-ether-amide)s and poly(sulfoxide-ether-amide)s with aliphatic units in the main chain were prepared from diacids with various diamines.The polyamides were obtained in quantitative yields and their inherent viscosities were in the range of 0.43-0.89 dl g⁻¹ at a concentration of 0.5 g dl⁻¹ in N,N-dimethylacetamide (DMAc) solvent at 25 °C. They showed good thermal stability. The temperature for 10% weight loss in argon atmosphere was in the range of 350-415 °C. The polymers showed glass transition temperatures between 228 and 261 °C. Almost all of the polyamides were readily soluble in a variety of polar solvents such as N-methyl-2-pyrrolidone (NMP) and dimethyl sulfoxide (DMSO).     

High glass transitions of novel organosoluble polyamide-imides based on noncoplanar and rigid diimide-dicarboxylic acid

A series of novel polyamide-imides (PAIs) with high glass transition temperature were prepared from diimide-dicarboxylic acid, 2,2′-bis(trifluoromethyl)-4,4′-bis(trimellitimidophenyl)biphenyl (BTFTB), by direct polycondensation with various diamines in N-methyl-2-pyrrolidinone using triphenyl phosphite and pyridine as condensing agents in the presence of dehydrating agent (CaCl₂). The yield of the polymers was obtained was high with moderate to high inherent viscosities (0.80-1.03 dL g⁻¹). Gel permeation chromatography (GPC) of the polymers showed number-average and weight-average molecular weights up to 8.6 × 10⁴ and 22 × 10⁴, respectively. The PAIs were amorphous in nature. Most of the polymers exhibited good solubility in various solvents such as N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), pyridine, cyclohexanone and tetrahydrofuran. The polymer films had tensile strength in the range of 79-103 MPa, an elongation at break in the range of 6-16%, and a tensile modulus in the range between 2.1 and 2.8 GPa. The glass transition temperatures of the polymers were determined by DMA method and they were in the range of 264-291 °C. The coefficients of thermal expansion (CTE) of PAIs were determined by TMA instrument and they were between 29 and 67 ppm °C⁻¹. These polymers were fairly thermally stable up to or above 438 °C, and lose 10% weight in the range of 446-505 °C and 438-496 °C, respectively, in nitrogen and air. These polymers had exhibited 80% transmission wavelengths which were in the range of 484-516 nm and their cutoff wavelengths were in between 418 and 434 nm. The PAIs with trifluoromethyl group have higher bulk density resulting in higher free volume and then lowering the dielectric constant.     

Novel processable and heat resistant poly(phenylthiourea azomethine imide)s: Synthesis and characterization

N-(4-chloro-3-aminobenzal)N′(4-aminophenyl)thiourea having phenylthiourea and azomethine groups was synthesized and exploited as starting material for the fabrication of new polymers. Novel diamine was condensed with pyromellitic dianhydride, 3,3′,4,4′-benzophenone-tetrcarboxylic dianhydride and 4,4′-(hexafluoroisopropylidene) diphthalic dianhydride to obtain poly(phenylthiourea azomethine imide)s. The structural explication of monomers and poly(phenylthiourea azomethine imide)s were carried out by FTIR, ¹H and ¹³C NMR techniques along with crystallinity, organosolubility, inherent viscosity and molecular weight measurements. Accordingly, polymers bearing CS and -CN- moieties in the backbone demonstrated an amorphous nature and were readily soluble in amide solvents such as DMAc, DMF, and DMSO. Poly(phenylthiourea azomethine imide)s encompassed η_inh of 1.40-1.55 dL/g and were obtained in quantitative yields. In addition, GPC measurements of polymers revealed M_w around 60,291-67,665. Thermal stability of these polymers was ascertained via 10% weight loss temperatures around 514-533 °C in an inert atmosphere. Besides, glass transition temperatures of polyimides were found to be 272-276 °C.     

Regularly alternating poly(amideimide)s containing pendent pentadecyl chains: Synthesis and characterization

Two new aromatic diamines containing preformed amide linkages, viz., N,N′-(4-pentadecyl-1,3-phenylene)bis(4-aminobenzamide) I and N,N′-(4-pentadecyl-1,3-phenylene)bis(3-aminobenzamide) II, were synthesized by reaction of 4-pentadecylbenzene-1,3-diamine with 4-nitrobenzoylchloride and 3-nitrobenzoylchloride, followed by reduction of the respective dinitro derivatives. A series of new poly(amideimide)s was synthesized by polycondensation of I and II with four commercially available aromatic dianhydrides, viz., pyromellitic dianhydride (PMDA), 4,4′-biphenyltetracarboxylic dianhydride (BPDA), 4,4′-oxydiphthalic anhydride (ODPA), and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6-FDA) in N,N-dimethylacetamide (DMAc) employing conventional two step method via poly(amic acid) intermediate followed by thermal imidization. Reference poly(amideimide)s were synthesized by polycondensation of N,N′-(1,3-phenylene)bis(4-aminobenzamide) and N,N′-(1,3-phenylene)bis(3-aminobenzamide) with the same aromatic dianhydrides. Inherent viscosities of poly(amideimide)s containing pendent pentadecyl chains were in the range 0.37-1.23 dL/g in N,N-dimethylacetamide at 30 ± 0.1 °C indicating the formation of medium to high molecular weight polymers. The poly(amideimide)s containing pendent pentadecyl chains were found to be soluble in N,N-dimethylacetamide, N,N-dimethylformamide, 1-methyl-2-pyrrolidinone and pyridine and could be cast into transparent, flexible and tough films from their N,N-dimethylacetamide solution. Wide angle X-ray diffraction patterns exhibited broad halo indicating that the polymers were essentially amorphous in nature. X-ray diffractograms also displayed sharp reflection in the small angle region (2θ ≈ 3°) for poly(amideimide)s containing pentadecyl chains indicating the formation of layered structure arising from packing of flexible pentadecyl chains. The glass transition temperatures observed for reference poly(amideimide)s were in the range 331-275 °C and those for poly(amideimide)s containing pendent pentadecyl chains were in the range 185-286 °C indicating a large drop in T_g owing to the “internal plasticization” effect of pentadecyl chains. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, were in the range 460-480 °C indicating their good thermal stability.     

New soluble aromatic polyamides containing ether linkages and laterally attached p-terphenyls

Two series of new polyamides containing flexible ether linkages and laterally attached side rods (3a-i and 4a-i) were synthesized from 2^′,5^′-bis(4-aminophenoxy)-[1,1^′;4^′,1^″]terphenyl (1a) and 2^′,5^′-bis(4-amino-2-trifluoromethylphenoxy)-[1,1^′;4^′,1^″]terphenyl (1b), respectively, with various aromatic dicarboxylic acids by the direct phosphorylation polycondensation. The polymers were produced with high yields and moderate to high inherent viscosities (0.41-0.97 dl/g) that corresponded to weight-average molecular weights (by size exclusion chromatography) of 47,000-65,000. Except for some polyamides that derived from rigid diacids, the obtained polyamides were readily soluble in aprotic polar solvents, such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc), and could afford flexible and tough films via solvent casting. The polymer films cast from DMAc solutions possessed tensile strengths of 85-106 MPa and initial moduli of 1.82-2.96 GPa. These polyamides showed glass-transition temperatures (T_g) in the range of 206-263 °C (by DSC) and softening temperatures (T_s) in the range of 211-253 °C (by TMA). Decomposition temperatures (T_d) for 10% weight loss all occurred above 400 °C (by TGA) in both nitrogen and air atmospheres. The polyamides 4a-i derived from trifluoromethyl-substituted diamine 1b generally showed a higher solubility, T_g and T_s but lower thermal stability as compared to the analogous polyamides 3a-i based on diamine 1a.     

Naphthalene-ring containing diamine and resulting thermally stable polyamides

A new naphthalene-ring containing diamine, bis-[4-(5-amino-naphthalene-1-yloxy)-phenyl]-methanone was prepared from reaction of 5-amino-1-naphthol with 4,4′-dichlorobenzophenone in the presence of K₂CO₃. A series of novel polyamides were prepared by direct polycondensation of the diamine with various commercially available diacid chlorides including terephthaloyl chloride, isophthaloyl chloride, adipoyl chloride, and sebacoyl chloride. All the synthesized polyamides showed good solubility in amide type solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, and N,N-dimethylformamide and they exhibited inherent viscosities in the range of 0.44-0.52 dL/g. According to the DMTA analysis, the glass transition temperatures of the polyamides were found to be 131-187 °C. Thermogravimetric analysis indicated that the polymers were stable up to 190 °C and the 10% weight loss temperatures were recorded in the range of 350-418 °C in air atmosphere.     

Synthesis, characterization and constitutional isomerism study of new aromatic polyamides containing pendant groups based on asymmetrically substituted meta-phenylene diamines

Four new aromatic polyamides containing pendant groups were synthesized by low temperature interfacial polycondensation of two asymmetrically substituted diamine monomers, namely, 4-[4-(1-methyl-1-phenylethyl) phenoxy]-1,3-diamino benzene and 4-{4-[(4-methylphenyl) sulphonyl]phenoxy}-1,3-diamino benzene with two aromatic diacid chlorides, namely isophthaloyl chloride and terephthaloyl chloride. Inherent viscosities of polyamides were in the range 0.64-0.72 dL/g indicating formation of medium molecular weight polymers. The weight average molecular weights and number average molecular weights, determined by gel permeation chromatography (polystyrene standard), were in the range 54,500-65,000 and 19,750-27,000, respectively. The constitutional isomerism of synthesized polyamides was investigated by ¹H and ¹³C NMR spectroscopy, where as the constitutional order was calculated from ¹H NMR spectroscopy and was found to be in the range 0.35-0.37. Polyamides containing pendant groups were essentially amorphous and were soluble in polar aprotic solvents such as N, N-dimethyl acetamide, N-methyl-2-pyrrolidone, N, N-dimethyl formamide and dimethyl sulfoxide. Polyamides exhibited glass-transition temperature in the range 237-254 °C. The initial decomposition temperature, determined by TGA in nitrogen atmosphere, of polyamides was in the range 371-410 °C indicating their good thermal stability.     

Synthesis and characterization of polyamides containing pendant pentadecyl chains

A new aromatic diacid monomer viz., 4-(4′-carboxyphenoxy)-2-pentadecylbenzoic acid was synthesized starting from cardanol and was characterized by FTIR, ¹H- and ¹³C NMR spectroscopy. A series of new aromatic polyamides containing ether linkages and pendant pentadecyl chains was prepared by phosphorylation polycondensation of 4-(4′-carboxyphenoxy)-2-pentadecylbenzoic acid with five commercially available aromatic diamines viz., 1,4-phenylenediamine, 4,4′-oxydianiline, 4,4′-methylenedianiline, 1,3-phenylenediamine, and 4,4′-(hexafluoroisopropylidene)dianiline. Inherent viscosities of the polyamides were in the range 0.45-0.66 dL/g in N,N-dimethylacetamide at 30 ± 0.1 °C. The introduction of ether linkages and pendant pentadecyl chains into polyamides led to an enhanced solubility in N,N-dimethylacetamide and 1-methyl-2-pyrrolidinone at room temperature or upon heating. The polyamides could be solution-cast into tough, flexible and transparent films from their N,N-dimethylacetamide solution. Wide angle X-ray diffraction patterns exhibited broad halo indicating that the polymers were essentially amorphous in nature. X-Ray diffractograms also displayed a diffuse to sharp reflection in the small-angle region (2θ = ∼2-5°) for the polyamides characteristics of formation of loosely to well-developed layered structure arising from packing of flexible pentadecyl chains. The glass transition temperature observed for the polyamides was in range 139-189 °C. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, of the polyamides was in the range 425-453 °C indicating their good thermal stability.     

Preparation and properties of new ortho-linked polyamide-imides bearing ether, sulfur, and trifluoromethyl linkages

A CF₃-containing diamine, 2,2′-thiobis-[4-methyl(2-trifluoromethyl)4-aminophenoxy) phenyl ether] (DA), was successfully synthesized from 2-2′-sulfide-bis-(4-methyl phenol) and 2-chloro-5-nitrobenzotrifluoride. The sulfur containing diimide-diacid (DIDA) was prepared by condensation reaction of diamine DA and trimellitic anhydride. A series of novel organic-soluble polyamide-imides (PAIs) bearing flexible ether and sulfide links, electron-withdrawing trifluoromethyl groups and ortho-phenylene units were synthesized from DIDA, by direct polycondensation with various aromatic diamines in N-methyl-2-pyrrolidone using triphenyl phosphite and pyridine as a condensing agent in the presence of dehydrating agent (LiCl). The polyamide-imides were obtained in high yields and possessed inherent viscosities in the range of 0.42-0.95 dL g⁻¹. All of the polymers were amorphous in nature, showed outstanding solubility and could be easily dissolved in amide-type polar aprotic solvents (e.g., N-methyl-2-pyrrolidone, N,N-dimethylacetamide, and N,N-dimethylformamide) and even dissolved in less polar solvents (e.g., pyridine and tetrahydrofuran). They showed good thermal stability with glass transition temperatures between 195-245 °C, 10% weight loss temperatures in excess of 485 °C, and char yields more than 50% at 700 °C in nitrogen atmosphere. Moreover, these PAIs possessed low refractive indexes (n = 1.57-1.59) and low birefringence (Δ ≈ 0.02) due to the trifluoromethyl pendent groups and thioether bridged ortho-catenated aromatic rings that interrupt chain packing and increase free volume.     

A new class of aromatic polybenzoxazoles containing ortho-phenylenedioxy groups

A series of poly(o-hydroxy amide)s having both ether and ortho-catenated phenylene unit in the main chain were synthesized via the low-temperature solution polycondensation of 4,4^′-(1,2-phenylenedioxy)dibenzoyl chloride and 4,4^′-(4-tert-butyl-1,2-phenylenedioxy)dibenzoyl chloride with three bis(o-aminophenol)s including 4,4^′-diamino-3,3^′-dihydroxybiphenyl, 3,3^′-diamino-4,4^′-dihydroxybiphenyl, and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane. The poly(o-hydroxy amide)s exhibited inherent viscosities in the range of 0.23-0.96 dl/g. Most of the poly(o-hydroxy amide)s were soluble in polar organic solvents such as N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP) and could afford flexible and tough films by solution casting. Subsequent thermal cyclodehydration of the poly(o-hydroxy amide)s afforded polybenzoxazoles. However, the polybenzoxazoles were organic-insoluble except for those with the hexafluoroisopropylidene group. The polybenzoxazoles exhibited glass-transition temperatures (T_g) in the range of 200-232 °C by DSC and softening temperatures (T_s) of 250-256 °C by thermomechanical analysis. Thermogravimetric analyses indicated that most polybenzoxazoles were stable up to 500 °C in air or nitrogen. The 10% weight loss temperatures were recorded in the ranges of 546-606 °C in air and 574-631 °C in nitrogen.     

Stepwise solid phase synthesis of uridylylated viral genome-linked peptides using uridylylated amino acid building blocks

The uridylylated amino acid building blocks 2-cyanoethyl-(N^α-9-fluorenylmethoxy-carbonyl-tyrosin-4-yl)-(2′,3′-di-O-acetyluridin-5′-yl) phosphate and 2-chlorophenyl-(N^α-fluorenyl-methoxycarbonyl-serin-3-yl)-(2′,3′-di-O-acetyluridin-5′-yl) phosphate have been used successfully in an on-line SPPS of the VPgpU from the polio, coxsackie and cowpea mosaic virus.     

Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

Polyimides from 1,5-bis(4-amino-2-trifluoromethylphenoxy)naphthalene and aromatic tetracarboxylic dianhydrides

A new trifluoromethylated bis(ether amine), 1,5-bis(4-amino-2-trifluoromethylphenoxy)naphthalene, was synthesized in two steps starting from 1,5-dihydroxynaphthalene and 2-chloro-5-nitrobenzotrifluoride via nucleophilic aromatic substitution and catalytic reduction. A series of novel fluorinated polyimides with moderate to high molecular weights were synthesized from the diamine with various aromatic tetracarboxylic dianhydrides using a conventional two-stage process. All polyimides could afford flexible and tough films and most of them were soluble in strong polar solvents such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc). The polyimides showed glass-transition temperatures (T_g) in the range of 253-315 °C (by DSC) and softening temperatures (T_s) in the range of 250-300 °C (by TMA). Decomposition temperatures for 5% weight loss all occurred above 500 °C in both air and nitrogen atmospheres. The dielectric constants of these polymers ranged from 3.17 to 3.64 at 1 MHz. The properties of these fluorinated polyimides were also compared with those of polyimides prepared from 1,5-bis(4-aminophenoxy)naphthalene with the same dianhydrides.     

Thermal stability and degradation behavior of novel wholly aromatic azopolyamide-hydrazides

Thermal stability and degradation behavior of a series of novel wholly aromatic polyamide-hydrazides containing azo groups in their main chains have been investigated in nitrogen and in air atmospheres using differential scanning calorimetry (DSC), thermogravimetry (TG), infrared spectroscopy (IR) and elemental analysis. The influences of controlled structural variations and molecular weight on the thermal stability and degradation behavior of this series of polymers have also been studied. The structural differences were achieved by varying the content of para- and meta-substituted phenylene rings incorporated within this series. Azopolyamide-hydrazides having different molecular weights of all para-substituted phenylene type units were also examined. The polymers were prepared by a low temperature solution polycondensation reaction of p-aminosalicylic acid hydrazide [PASH] and an equimolar amount of 4,4′-azodibenzoyl chloride [4,4′ADBC] or 3,3′-azodibenzoyl chloride [3,3′ADBC] or mixtures of various molar ratios of 4,4′ADBC and 3,3′ADBC in anhydrous N,N-dimethyl acetamide [DMAc] containing lithium chloride as a solvent at −10 °C. All the polymers have the same structural formula except the mode of linking phenylene units in the polymer chain. The results clearly reveal that these polymers are characterized by high thermal stability. Their weight loss occurred in three distinctive steps. The first was small and assigned to the evaporation of absorbed moisture. The second was appreciable and was attributed to the cyclodehydration reaction of the hydrazide groups into 1,3,4-oxadiazole rings by losing water, combined with elimination of azo groups by losing molecular nitrogen. This is not a true degradation but rather a thermo-chemical transformation reaction of the azopolyamide-hydrazides into the corresponding polyamide-1,3,4-oxadiazoles. The third was relatively severe and sharp, particularly in air, and corresponded to the decomposition of the resulting polyamide-1,3,4-oxadizoles. In both degradation atmospheres, the improved resistance to high temperatures was always associated with increased content of para-phenylene moieties of the investigated polymer. The better thermal stability of the wholly para-oriented type of polymer relative to the other polymers is attributed to its greater chain symmetry which is responsible for its greater close packing, rod-like structure and consequently stronger intermolecular bonds which would be more difficult to break and therefore more resistance to high temperatures. Further, with exception of 160-200 °C temperature range, where the lower molecular weight samples showed considerable weight losses which were most probably due to hydrogen bonded DMAc, all the wholly para-oriented phenylene type of polymer samples behaved similarly regardless of their respective molecular weight. This seems to indicate that the structural building units responsible for high thermal stability of the polymers are their characteristic groups, such as aromatic moieties, amide and hydrazide linkages in case of azopolyamide-hydrazides, and 1,3,4-oxadiazole rings, aromatic nuclei and amide linking bonds in case of polyamide-1,3,4-oxadiazoles, rather than the longer chain segments.     

New soluble, thermally stable poly(amide-imide)s containing cardo anthraquinone unit

Preparation of new types of polyimides with high thermal stability and improved solubility was considered. In this way, two new amide diamines containing bulky pendant units were prepared in two steps: nucleophilic substitution reactions of 1- and 2-aminoanthraquinone with 3,5-dinitrobenzoyl chloride to form amide containing dinitro compounds, and then reduction of resulted dinitro compounds with hydrazine monohydrate in the presence of palladium/activated carbon. Two series of new poly(amide-imide)s were prepared from the reactions of these two diamines with various dianhydrides by one step polyimidation process. All poly(amide-imide)s were characterized by FTIR and ¹H-NMR spectroscopies and elemental analysis. The polymers were obtained in high yields with inherent viscosities of 0.54-0.69 dl g⁻¹. X-ray diffraction patterns (XRD) showed that all the polymers were amorphous and therefore this factor in addition to the introduction of bulky anthraquinone group led to good solubility of the polymers in most common organic solvents especially in N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), and dimethylsulfoxide (DMSO). Thermal analysis showed glass transition temperature between 204 and 226 °C. Decomposition temperatures were more than 293 °C, also 10% weight loss were in the range of 387-419 °C in air.     

Novel thermally stable poly(thiourea-amide-imide)s bearing CS moieties and pyridine units in the backbone: Synthesis and properties

Novel thermally stable and organosoluble poly(thiourea-amide-imide)s (PTAIs) were synthesized through the condensation of various diamines with a new kind of aromatic diacid chloride monomer containing pyridine units, 2-(3-(2-(3-(chlorocarbonyl)pyridin-2-yl)-1,3-dioxoisoindoline-5-carbonyl) thioureido) nicotinoyl chloride, CPDITNC. Spectroscopic and elemental analyses were carried out for the structure elucidation of synthesized monomers. Accordingly, the ensuing PTAIs were characterized by FTIR, ¹H and ¹³C NMR techniques along with crystallinity, organosolubility, inherent viscosity and GPC measurements. Consequently, polymers bearing phenyl thiourea and pyridine moieties in the backbone exhibited good organosolubility in a variety of highly polar solvents such as DMAc, DMF, DMSO and NMP. PTAIs encompassed η_inh of 1.24-1.46 dL/g and two of the polymers showed crystalline behavior. Moreover, GPC measurements of polymers revealed M_w around 33,000-50,000. Thermal stability of these polymers was ascertained via 10% weight loss temperatures in the range of 548-562 °C (inert atmosphere). Ultimately, these polymers own high glass-transition temperatures about 264-270 °C.