The strong-field tripodal phosphine donor, [PhB(CH2PiPr2)3]-, provides access to electronically and coordinatively unsaturated transition metal complexes

This paper introduces a sterically encumbered, strong-field tris(diisopropylphosphino)borate ligand, [PhBP(iPr)(3)] ([PhBP(iPr)(3)] = [PhB(CH(2)P(i)Pr(2))(3)](-)), to probe aspects of its conformational and electronic characteristics within a host of complexes. To this end, the Tl(I) complex, [PhBP(iPr)(3)]Tl (1), was synthesized and characterized in the solid-state by X-ray diffraction analysis. This precursor proves to be an effective transmetallating agent, as evidenced by its reaction with the divalent halides FeCl(2) and CoX(2) (X = Cl, I) to produce the monomeric, 4-coordinate, high-spin derivatives [PhBP(iPr)(3)]FeCl (2) and [PhBP(iPr)(3)]CoX (X = Cl (3), I (4)) in good yield. Complexes 2-4 were each characterized by X-ray diffraction analysis and shown to be monomeric in the solid-state. For conformational and electronic comparison within a system exhibiting higher than 4-coordination, the 16-electron ruthenium complexes [[PhBP(iPr)(3)]Ru(mu-Cl)](2) (5) and [[PhBP(3)]Ru(mu-Cl)](2) (6) were prepared and characterized ([PhBP(3)] = [PhB(CH(2)PPh(2))(3)](-)). The chloride complexes 2 and 3 reacted with excess CO to afford the divalent, monocarbonyl adducts [PhBP(iPr)(3)]FeCl(CO) (7) and [PhBP(iPr)(3)]CoCl(CO) (8), respectively. Reaction of 4 with excess CO resulted in the monovalent, dicarbonyl product [PhBP(iPr)(3)]Co(I)(CO)(2) (9). Complexes 5 and 6 also bound CO readily, providing the octahedral, 18-electron complexes [PhBP(iPr)(3)]RuCl(CO)(2) (10) and [PhBP(3)]RuCl(CO)(2) (11), respectively. Dimers 5 and 6 were broken up by reaction with trimethylphosphine to produce the mono-PMe(3) adducts [PhBP(iPr)(3)]RuCl(PMe(3)) (12) and [PhBP(3)]RuCl(PMe(3)) (13). Stoichiometric oxidation of 3 with dioxygen provided the 4-electron oxidation product [PhB(CH(2)P(O)(i)Pr(2))(2)(CH(2)P(i)Pr(2))]CoCl (14), while exposure of 3 to excess oxygen results in the 6-electron oxidation product [PhB(CH(2)P(O)(i)Pr(2))(3)]CoCl (15). Complexes 2 and 4 were characterized via cyclic voltammetry to compare their redox behavior to their [PhBP(3)] analogues. Complex 4 was also studied by SQUID magnetization and EPR spectroscopy to confirm its high-spin assignment, providing an interesting contrast to its previously described low-spin relative, [PhBP(3)]CoI. The difference in spin states observed for these two systems reflects the conformational rigidity of the [PhBP(iPr)(3)] ligand by comparison to [PhBP(3)], leaving the former less able to accommodate a JT-distorted electronic ground state.     

Taking TiF4 complexes to extremes--the first examples with phosphine co-ligands

The first soft donor adducts of TiF(4), [TiF(4)(diphosphine)] (diphosphine = o-C(6)H(4)(PMe(2))(2), R(2)P(CH(2))(2)PR(2), R = Me or Et) have been prepared from [TiF(4)(MeCN)(2)] and the diphosphines in rigorously anhydrous CH(2)Cl(2), as extremely moisture sensitive yellow solids, and characterised by multinuclear NMR ((1)H, (31)P, (19)F), IR and UV/vis spectroscopy. The crystal structure of [TiF(4){Et(2)P(CH(2))(2)PEt(2)}] has been determined and shows a distorted six-coordinate geometry with disparate Ti-F(transF) and Ti-F(transP) distances and long Ti-P bonds. Weaker soft donor ligands including Ph(3)P, Ph(2)P(CH(2))(2)PPh(2), o-C(6)H(4)(PPh(2))(2), Ph(2)As(CH(2))(2)AsPh(2), o-C(6)H(4)(AsMe(2))(2) and (i)PrS(CH(2))(2)S(i)Pr do not form stable complexes with TiF(4), although surprisingly, fluorotitanate(IV) salts of the previously unknown doubly protonated ligand cations [LH(2)][Ti(4)F(18)] (L = o-C(6)H(4)(PPh(2))(2), o-C(6)H(4)(AsMe(2))(2) and (i)PrS(CH(2))(2)S(i)Pr) are formed in some cases as minor by-products. The structure of [o-C(6)H(4)(PPh(2)H)(2)][Ti(4)F(18)] shows the first authenticated example of a diprotonated o-phenylene-diphosphine. The synthesis and full spectroscopic characterisation are reported for a range of TiF(4) adducts with hard N- or O-donor ligands for comparison purposes, along with crystal structures of [TiF(4)(thf)(2)], [TiF(4)(Ph(3)EO)(2)]·2CH(2)Cl(2) (E = P or As), and [TiF(4)(bipy)].     

Synthesis and reactivity of rare earth metal alkyl complexes stabilized by anilido phosphinimine and amino phosphine ligands

Anilido phosphinimino ancillary ligand H(2)L(1) reacted with one equivalent of rare earth metal trialkyl [Ln{CH(2)Si(CH(3))(3)}(3)(thf)(2)] (Ln=Y, Lu) to afford rare earth metal monoalkyl complexes [L(1)LnCH(2)Si(CH(3))(3)(THF)] (1 a: Ln=Y; 1 b: Ln=Lu). In this process, deprotonation of H(2)L(1) by one metal alkyl species was followed by intramolecular C--H activation of the phenyl group of the phosphine moiety to generate dianionic species L(1) with release of two equivalnts of tetramethylsilane. Ligand L(1) coordinates to Ln(3+) ions in a rare C,N,N tridentate mode. Complex l a reacted readily with two equivalents of 2,6-diisopropylaniline to give the corresponding bis-amido complex [(HL(1))LnY(NHC(6)H(3)iPr(2)-2,6)(2)] (2) selectively, that is, the C--H activation of the phenyl group is reversible. When 1 a was exposed to moisture, the hydrolyzed dimeric complex [{(HL(1))Y(OH)}(2)](OH)(2) (3) was isolated. Treatment of [Ln{CH(2)Si(CH(3))(3)}(3)(thf)(2)] with amino phosphine ligands HL(2-R) gave stable rare earth metal bis-alkyl complexes [(L(2-R))Ln{CH(2)Si(CH(3))(3)}(2)(thf)] (4 a: Ln=Y, R=Me; 4 b: Ln=Lu, R=Me; 4 c: Ln=Y, R=iPr; 4 d: Ln=Y, R=iPr) in high yields. No proton abstraction from the ligand was observed. Amination of 4 a and 4 c with 2,6-diisopropylaniline afforded the bis-amido counterparts [(L(2-R))Y(NHC(6)H(3)iPr(2)-2,6)(2)(thf)] (5 a: R=Me; 5 b: R=iPr). Complexes 1 a,b and 4 a-d initiated the ring-opening polymerization of d,l-lactide with high activity to give atactic polylactides.     

Reactions of manganese and rhenium complexes with organic azides: preparation of tetraazabutadiene derivatives

Azide complexes [M(RN(3))(CO)(3)P(2)]BPh(4)[M = Mn, Re; R = C(6)H(5)CH(2), 4-CH(3)C(6)H(4)CH(2), C(6)H(5), 4-CH(3)C(6)H(4), C(5)H(9); P = PPh(OEt)(2), PPh(2)(OEt)] were prepared by allowing tricarbonyl MH(CO)(3)P(2) hydride complexes to react first with Br?nsted acid (HBF(4), CF(3)SO(3)H) and then with organic azide in the dark. In sunlight the reaction yielded tetraazabutadiene [M(eta(2)-1,4-R(2)N(4))(CO)(2)P(2)]BPh(4) complexes or, with benzyl azide, imine [M{eta(1)-NH[double bond, length as m-dash]C(H)Ar}(CO)(3)P(2)]BPh(4)(Ar = C(6)H(5), 4-CH(3)C(6)H(4)) derivatives. Tetraazabutadiene [M(eta(2)-1,4-R(2)N(4))(CO)(2)P(2)]BPh(4) complexes were also prepared by reacting dicarbonyl MH(CO)(2)P(3) species first with Br?nsted acid and then with an excess of organic azide. Complexes were characterised spectroscopically (IR, (1)H, (31)P, (13)C, (15)N NMR data) and by the X-ray crystal structure determination of complex [Re{eta(2)-1,4-(C(6)H(5)CH(2))(2)N(4)}(CO)(2){PPh(OEt)(2)}(2)]BPh(4)(). Strong evidence for coordination of the organic azide was obtained from the (15)N NMR spectra of labelled [M(C(6)H(5)CH(2)(15)NN(15)N)(CO)(3)P(2)]BPh(4) derivatives.     

Synthesis and coordination chemistry of phosphine oxide decorated dibenzofuran platforms

A four-step synthesis for 4,6-bis(diphenylphosphinoylmethyl)dibenzofuran (4) from dibenzofuran and a two-step synthesis for 4,6-bis(diphenylphosphinoyl)dibenzofuran (5) are reported along with coordination chemistry of 4 with In(III), La(III), Pr(III), Nd(III), Er(III), and Pu(IV) and of 5 with Er(III). Crystal structure determinations for the ligands, 4·CH(3)OH and 5, the 1:1 complexes [In(4)(NO(3))(3)], [Pr(4)(NO(3))(3)(CH(3)CN)]·0.5CH(3)CN, [Er(4)(NO(3))(3)(CH(3)CN)]·CH(3)CN, [Pu(4)Cl(4)]·THF and the 2:1 complex [Nd(4)(2)(NO(3))(2)](2)(NO(3))(2)·(H(2)O)·4(CH(3)OH) are described. In these complexes, ligand 4 coordinates in a bidentate POP'O' mode via the two phosphine oxide O-atoms. The dibenzofuran ring O-atom points toward the central metal cations, but in every case it is more than 4 ? from the metal. A similar bidentate POP'O' chelate structure is formed between 5 and Er(III) in the complex, {[Er(5)(2)(NO(3))(2)](NO(3))·4(CH(3)OH)}(0.5), although the nonbonded Er···O(furan) distance is reduced to ～3.6 ?. The observed bidentate chelation modes for 4 and 5 are consistent with results from molecular mechanics computations. The solvent extraction performance of 4 and 5 in 1,2-dichloroethane for Eu(III) and Am(III) in nitric acid solutions is described and compared against the extraction behavior of n-octyl(phenyl)-N,N-diisobutylcarbamoylmethyl phosphine oxide (OΦDiBCMPO) measured under identical conditions.     

Osmium-mediated C--H and C--C bond cleavage of a phenolic substrate: p-quinone methide and methylene arenium pincer complexes

The diphosphine 2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)OH (1) reacts with [OsCl(2)(PPh(3))(3)] in presence of an excess of triethylamine to yield the isomeric para-quinone methide derivatives [Os{4-(CH(2))-1-(O)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))] (2 and 3), which differ in the positions of the mutually trans hydride and chloride ligands. Complex 2 reacts with CO to afford the dicarbonyl species [Os{1-(O)-2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(CO)(2)] (4), which results from hydride insertion into the quinonic double bond. Protonation of 2 and 3 leads to the formation of the methylene arenium derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))][OSO(2)CF(3)] (5 a). The diphosphine 1 reacts with [OsCl(2)(PPh(3))(3)] at 100 degrees C under H(2) to afford [Os{1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H(2))(PPh(3))] (6), a PCP pincer complex resulting formally from C(sp(2))--C(sp(3)) cleavage of the C--CH(3) group in 1. C--C hydrogenolysis resulting in the same complex is achieved by heating 2 under H(2) pressure. Reaction of the diphosphine substrate with [OsCl(2)(PPh(3))(3)] under H(2) at lower temperature allows the observation of a methylene arenium derivative resulting from C--H activation, [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(2)(H)] (7). This compound reacts with PPh(3) in toluene to afford the ionic derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))]Cl (5 b). X-ray diffraction studies have been carried out on compounds 2, 3, 4, 5 b, 6, and 7, which allows the study of the structural variations when going from methylene arenium to quinone methide derivatives.     

Considering Fe(II/IV) redox processes as mechanistically relevant to the catalytic hydrogenation of olefins by [PhBP iPr 3]Fe-H x species

Several coordinatively unsaturated pseudotetrahedral iron(II) precursors, [PhBP(iPr)(3)]Fe-R ([PhBP(iPr)(3)] = [PhB(CH(2)P(i)Pr(2))(3)](-); R = Me (2), R = CH(2)Ph (3), R = CH(2)CMe(3) (4)) have been prepared from [PhBP(iPr)(3)]FeCl (1) that serve as precatalysts for the room-temperature hydrogenation of unsaturated hydrocarbons (e.g., ethylene, styrene, 2-pentyne) under atmospheric H(2) pressure. The solid-state crystal structures of 2 and 3 are presented. To gain mechanistic insight into the nature of these hydrogenation reactions, a number of [PhBP(iPr)(3)]-supported iron hydrides were prepared and studied. Room-temperature hydrogenation of alkyls 2-4 in the presence of a trapping phosphine ligand affords the iron(IV) trihydride species [PhBP(iPr)(3)]Fe(H)(3)(PR(3)) (PR(3) = PMe(3) (5); PR(3) = PEt(3) (6); PR(3) = PMePh(2) (7)). These spectroscopically well-defined trihydrides undergo hydrogen loss to varying degrees in solution, and for the case of 7, this process leads to the structurally identified Fe(II) hydride product [PhBP(iPr)(3)]Fe(H)(PMePh(2)) (9). Attempts to prepare 9 by addition of LiEt(3)BH to 1 instead lead to the Fe(I) reduction product [PhBP(iPr)(3)]Fe(PMePh(2)) (10). The independent preparations of the Fe(II) monohydride complex [PhBP(iPr)(3)]Fe(II)(H)(PMe(3)) (11) and the Fe(I) phosphine adduct [PhBP(iPr)(3)]Fe(PMe(3)) (8) are described. The solid-state crystal structures of trihydride 5, monohydride 11, and 8 are compared and demonstrate relatively little structural reorganization with respect to the P(3)Fe-P' core motif as a function of the iron center's formal oxidation state. Although paramagnetic 11 (S = 1) is quantitatively converted to the diamagnetic trihydride 5 under H(2), the Fe(I) complex 8 (S = (3)/(2)) is inert toward atmospheric H(2). Complex 10 is likewise inert toward H(2). Trihydrides 5 and 6 also serve as hydrogenation precatalysts, albeit at slower rates than that for the benzyl complex 3 because of a rate-contributing phosphine dependence. That these hydrogenations appear to proceed via well-defined olefin insertion steps into an Fe-H linkage is indicated by the reaction between trihydride 5 and ethylene, which cleanly produces the ethyl complex [PhBP(iPr)(3)]Fe(CH(2)CH(3)) (13) and an equivalent of ethane. Mechanistic issues concerning the overall reaction are described.     

Neutral and cationic alkylmanganese(II) complexes containing 2,6-bisiminopyridine ligands

Manganese alkyl complexes stabilised by 2,6-bis(N,N'-2,6-diisopropyl-phenyl)acetaldiminopyridine ((iPr)BIP) have been selectively prepared by reacting suitable alkylmanganese(II) precursors, such as homoleptic dialkyls [(MnR(2))(n)] or the corresponding THF adducts [{MnR(2)(thf)}(2)] with the mentioned ligand. For R=CH(2)CMe(2)Ph or CH(2)Ph, formally Mn(I) derivatives are produced, in which one of the two R groups migrates to the 4-position of the central pyridine ring in the (iPr)BIP ligand. In contrast, a true dialkyl complex [MnR(2)((iPr)BIP)] can be isolated for R=CH(2)SiMe(3). In solution, this compound slowly evolves to the corresponding Mn(I) monoalkyl derivative. A detailed study of this reaction provides insights on its mechanism, showing that it proceeds through successive alkyl migrations, followed by spontaneous dehydrogenation. Protonation of [Mn(CH(2)SiMe(3))(2)((iPr)BIP)] with the pyridinium salt [H(Py)(2)][BAr'(4)] (Ar'=3,5-C(6)H(3)(CF(3))(2)) leads to the cationic species [Mn(CH(2)SiMe(3))(Py)((iPr)BIP)](+). Alternatively, the same complex can be produced by reaction of the pyridine complex [{Mn(CH(2)SiMe(3))(2)(Py)}(2)] with the protonated ligand salt [H(iPr)BIP](+)[BAr'(4)](-). This last reaction allows the synthesis of analogous cationic alkylmanganese(II) derivatives, when precursors of type [MnR(2)((iPr)BIP)] are not available. Treatment of these neutral and cationic (iPr)BIP alkylmanganese derivatives with a range of typical co-catalysts (modified methylaluminoxane (MMAO), B(C(6)F(5))(3), trimethyl or triisobutylaluminum) does not lead to active ethylene polymerisation catalysts.     

Preparation of benzyl azide complexes of iridium(III)

Hydride complexes IrHCl(2)(PiPr(3))P(2) (1) and IrHCl(2)P(3) (2) [P = P(OEt)(3) and PPh(OEt)(2)] were prepared by allowing IrHCl(2)(PiPr(3))(2) to react with phosphite in refluxing benzene or toluene. Treatment of IrHCl(2)P(3), first with HBF(4).Et(2)O and then with an excess of ArCH(2)N(3), afforded benzyl azide complexes [IrCl(2)(eta(1)-N(3)CH(2)Ar)P(3)]BPh(4) (3, 4) [Ar = C(6)H(5), 4-CH(3)C(6)H(4); P = P(OEt)(3), PPh(OEt)(2)]. Azide complexes reacted in CH(2)Cl(2) solution, leading to the imine derivative [IrCl(2){eta(1)-NH=C(H)C(6)H(5)}P(3)]BPh(4) (5). The complexes were characterized by spectroscopy and X-ray crystal structure determination of [IrCl(2)(eta(1)-N(3)CH(2)C(6)H(5)){P(OEt)(3)}(3)]BPh(4) (3a) and [IrCl(2){eta(1)-NH=C(H)C(6)H(5)}{P(OEt)(3)}(3)]BPh(4) (5a). Both solid-state structure and (15)N NMR data indicate that the azide is coordinated through the substituted Ngamma [Ir]-Ngamma(CH(2)Ar)NNalpha nitrogen atom.     

Ruthenium tris(pyrazolyl)borate diazo complexes: preparation of aryldiazenido, aryldiazene, and hydrazine derivatives

Tris(pyrazolyl)borate aryldiazenido complexes [RuTpLL'(ArN(2))](BF(4))(2) (1-3) [Ar = C(6)H(5), 4-CH(3)C(6)H(4); Tp = hydridotris(pyrazolyl)borate; L = P(OEt)(3) or PPh(OEt)(2), L' = PPh(3); L = L' = P(OEt)(3)] were prepared by allowing dihydrogen [RuTp(eta(2)-H(2))LL'](+) derivatives to react with aryldiazonium cations. Spectroscopic characterization (IR, (15)N NMR) using the (15)N-labeled derivatives strongly supports the presence of a linear [Ru]-NN-Ar aryldiazenido group. Hydrazine complexes [RuTp(RNHNH(2))LL']BPh(4) (4-6) [R = H, CH(3), C(6)H(5), 4-NO(2)C(6)H(4); L = P(OEt)(3) or PPh(OEt)(2), L' = PPh(3); L = L' = P(OEt)(3)] were also prepared by reacting the [RuTp(eta(2)-H(2))LL'](+) cation with an excess of hydrazine. The complexes were characterized spectroscopically (IR and NMR) and by X-ray crystal structure determination of the [RuTp(CH(3)NHNH(2))[P(OEt)(3)](PPh(3))]BPh(4) (4d) derivative. Tris(pyrazolyl)borate aryldiazene complexes [RuTp(ArN=NH)LL']BPh(4) (7-9) (Ar = C(6)H(5), 4-CH(3)C(6)H(4)) were prepared following three different methods: (i). by allowing hydride species RuHTpLL' to react with aryldiazonium cations in CH(2)Cl(2); (ii). by treating aryldiazenido [RuTpLL'(ArN(2))](BF(4))(2) with LiBHEt(3) in CH(2)Cl(2); (iii). by oxidizing arylhydrazine [RuTp(ArNHNH(2))LL']BPh(4) complexes with Pb(OAc)(4) in CH(2)Cl(2) at -30 degrees C. Methyldiazene complexes [RuTp(CH(3)N=NH)LL']BPh(4) were also prepared by the oxidation of the corresponding methylhydrazine [RuTp(CH(3)NHNH(2))LL']BPh(4) with Pb(OAc)(4).     

Bis(phosphino)borates: a new family of monoanionic chelating phosphine ligands

The reaction of dimethyldiaryltin reagents Me(2)SnR(2) (R = Ph (1), p-MePh (2), m,m-Me(2)Ph (3), p-(t)BuPh (4), p-MeOPh (5), p-CF(3)Ph (6)) with BCl(3) provided a high-yielding, simple preparative route to the corresponding diarylchloroboranes R(2)BCl (R = Ph (10), p-MePh (11), m,m-Me(2)Ph (12), p-(t)BuPh (13), p-MeOPh (14), p-CF(3)Ph (15)). In some cases, the desired diarylchloroborane was not formed from an appropriate tin reagent Me(2)SnR(2) (R = o-MeOPh (7), o,o-(MeO)(2)Ph (8), o-CF(3)Ph (9)). The reaction of lithiated methyldiaryl- or methyldialkylphosphines with diarylchloroboranes or dialkylchloroboranes is discussed. Specifically, several new monoanionic bis(phosphino)borates are detailed: [Ph(2)B(CH(2)PPh(2))(2)] (25); [(p-MePh)(2)B(CH(2)PPh(2))(2)] (26); [(p-(t)BuPh)(2)B(CH(2)PPh(2))(2)] (27); [(p-MeOPh)(2)B(CH(2)PPh(2))(2)] (28); [(p-CF(3)Ph)(2)B(CH(2)PPh(2))(2)] (29); [Cy(2)B(CH(2)PPh(2))(2)] (30); [Ph(2)B(CH(2)P[p-(t)BuPh](2))(2)] (31); [(p-MeOPh)(2)B(CH(2)P[p-(t)BuPh](2))(2)] (32); [Ph(2)B(CH(2)P[p-CF(3)Ph](2))(2)] (33); [Ph(2)B(CH(2)P(BH(3))(Me)(2))(2)] (34); [Ph(2)B(CH(2)P(S)(Me)(2))(2)] (35); [Ph(2)B(CH(2)P(i)Pr(2))(2)] (36); [Ph(2)B(CH(2)P(t)Bu(2))(2)] (37); [(m,m-Me(2)Ph)(2)B(CH(2)P(t)Bu(2))(2)] (38). The chelation of diarylphosphine derivatives 25-33 and 36 to platinum was examined by generation of a series of platinum dimethyl complexes. The electronic effects of substituted bis(phosphino)borates on the carbonyl stretching frequency of neutral platinum alkyl carbonyl complexes were studied by infrared spectroscopy. Substituents remote from the metal center (i.e. on boron) have minimal effect on the electronic nature of the metal center, whereas substitution close to the metal center (on phosphorus) has a greater effect on the electronic nature of the metal center.     

Imido Complexes Derived from the Reactions of Niobium and Tantalum Pentachlorides with Primary Amines: Relevance to the Chemical Vapor Deposition of Metal Nitride Films

Reactions of niobium and tantalum pentachlorides with tert-butylamine (>/=6 equiv) in benzene afford the dimeric imido complexes [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) (90%) and [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) (79%). The niobium complex exists as two isomers in solution, while the tantalum complex is composed of three major isomers and at least two minor isomers. Analogous treatments with isopropylamine (>/=7 equiv) give the monomeric complexes NbCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2) (84%) and TaCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2) (84%). The monomeric complexes are unaffected by treatment with excess isopropylamine, while the dimeric complexes are cleaved to the monomers MCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)(2) upon addition of excess tert-butylamine in chloroform solution. Treatment of niobium and tantalum pentachlorides with 2,6-diisopropylaniline affords insoluble precipitates of [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (100%) and [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[TaCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (100%), which react with 4-tert-butylpyridine to afford the soluble complexes [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (45%) and [4-t-C(4)H(9)C(5)H(4)NH](2)[TaCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (44%). Sublimation of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), MCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2), and [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[MCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] leads to decomposition to give [MCl(3)(NR)(NH(2)R)](2) as sublimates (32-49%), leaving complexes of the proposed formulation MCl(NR)(2) as nonvolatile residues. By contrast, [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) sublimes without chemical reaction. Analysis of the organic products obtained from thermal decomposition of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) showed isobutylene and tert-butylamine in a 2.2:1 ratio. Mass spectra of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), and [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2) showed the presence of dimeric imido complexes, monomeric imido complexes, and nitrido complexes, implying that such species are important gas phase species in CVD processes utilizing these molecular precursors. The crystal structures of [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))], [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2), [NbCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2), and [TaCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) were determined. [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] crystallizes in the space group P2(1)/c with a = 12.448(3) ?, b = 10.363(3) ?, c = 28.228(3) ?, beta = 94.92(1) degrees, V = 3628(5) ?(3), and Z = 4. [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2) crystallizes in the space group P2(1)/c with a = 9.586(4) ?, b = 12.385(4) ?, c = 11.695(4) ?, beta = 112.89(2) degrees, V = 1279.0(6) ?(3), and Z = 2. [NbCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) crystallizes in the space group P2(1)/n with a = 10.285(3) ?, b = 11.208(3) ?, c = 23.867(6) ?, beta = 97.53 degrees, V = 2727(1) ?(3), and Z = 2. [TaCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) crystallizes in the space group P2(1)/n with a = 10.273(1) ?, b = 11.241(2) ?, c = 23.929(7) ?, beta = 97.69(2) degrees, V = 2695(2) ?(3), and Z = 2. These findings are discussed in the context of niobium and tantalum nitride film depositions from molecular precursors.     

Substitution and derivatization reactions of a water soluble iron(II) complex containing a self-assembled tetradentate phosphine ligand

Facile substitution reactions of the two water ligands in the hydrophilic tetradentate phosphine complex cis-[Fe{(HOCH2)P{CH2N(CH2P(CH2OH)2)CH2}2P(CH2OH)}(H2O)2](SO4) (abbreviated to [Fe(L1)(H2O)2](SO4), 1) take place upon addition of Cl-, NCS-, N3(-), CO3(2-) and CO to give [Fe(L1)X2] (2, X = Cl; 4, X = NCS; 5, X=N3), [Fe(L1)(kappa2-O(2)CO)], 6 and [Fe(L1)(CO)2](SO4), 7. The unsymmetrical mono-substituted intermediates [Fe(L1)(H2O)(CO)](SO(4)) and [Fe(L(1))(CO)(kappa(1)-OSO(3))] (8/9) have been identified spectroscopically en-route to 7. Treatment of 1 with acetic anhydride affords the acylated derivative [Fe{(AcOCH2)P{CH2N(CH2P(CH2OAc)2)CH2}2P(CH2OAc)}(kappa2-O(2)SO2)] (abbreviated to [Fe(L2)(kappa2-O(2)SO2)], 10), which has increased solubility over 1 in both organic solvents and water. Treatment of 1 with glycine does not lead to functionalisation of L1, but substitution of the aqua ligands occurs to form [Fe(L(1))(NH(2)CH(2)CO(2)-kappa(2)N,O)](HSO(4)), 11. Compound 10 reacts with chloride to form [Fe(L(2))Cl(2)] 12, and 12 reacts with CO in the presence of NaBPh4 to form [Fe(L2)Cl(CO)](BPh4) 13b. Both of the chlorides in 12 are substituted on reaction with NCS- and N3(-) to form [Fe(L2)(NCS)2] 14 and [Fe(L2)(N3)2] 15, respectively. Complexes 2.H2O, 4.2H2O, 5.0.812H2O, 6.1.7H2O, 7.H2O, 10.1.3CH3C(O)CH3, 12 and 15.0.5H2O have all been crystallographically characterised.     

Group 3 and lanthanide boryl compounds: syntheses, structures, and bonding analyses of Sc-B, Y-B, and Lu-B σ-coordinated NHC analogues

Reaction of [Ln(CH(2)SiMe(3))(2)(THF)(n)][BPh(4)] (Ln = Sc, Y, Lu ; n = 3, 4) with Li{B(NArCH)(2)}(THF)(2) (Ar = 2,6-C(6)H(3)(i)Pr(2)) formed the first group 3 and lanthanide boryl compounds, Sc{B(NArCH)(2)}(CH(2)SiMe(3))(2)(THF) and Ln{B(NArCH)(2)}(CH(2)SiMe(3))(2)(THF)(2) (Ln = Y, Lu), which contain two-center, two-electron Ln-B σ bonds. All of these systems were crystallographically characterized. Density functional theory analysis of the Ln-B bonding found it to be predominantly ionic, with covalent character in the σ-bonding Ln-B HOMO.     

Bimetallic Ruthenium PNP Pincer Complex As a Platform to Model Proposed Intermediates in Dinitrogen Reduction to Ammonia

A series of ruthenium complexes was isolated and characterized in the course of reactions aimed at studying the reduction of hydrazine to ammonia in bimetallic systems. The diruthenium complex {[HPNPRu(N(2))](2)(μ-Cl)(2)}(BF(4))(2) (2) (HPNP = HN(CH(2)CH(2)P(i)Pr(2))(2)) reacted with 1 equiv of hydrazine to generate [(HPNPRu)(2)(μ(2)-H(2)NNH(2))(μ-Cl)(2)](BF(4))(2) (3) and with an excess of the reagent to form [HPNPRu(NH(3))(κ(2)-N(2)H(4))](BF(4))Cl (5). When phenylhydrazine was added to 2, the diazene species [(HPNPRu)(2)(μ(2)-HNNPh)(μ-Cl)(2)](BF(4))(2) (4) was obtained. Treatment of 2 with H(2) or CO yielded {[HPNPRu(H(2))](2)(μ-Cl)(2)}(BF(4))(2) (7) and [HPNPRuCl(CO)(2)]BF(4) (8), respectively. Abstraction of chloride using AgOSO(2)CF(3) or AgBPh(4) afforded the species [(HPNPRu)(2)(μ(2)-OSO(2)CF(3))(μ-Cl)(2)]OSO(2)CF(3) (9) and [(HPNPRu)(2)(μ-Cl)(3)]BPh(4) (10), respectively. Complex 3 reacted with HCl/H(2)O or HCl/Et(2)O to produce ammonia stoichiometrically; the complex catalytically disproportionates hydrazine to generate ammonia.     

Molybdenum(VI) dioxo and oxo-imido complexes of fluorinated β-ketiminato ligands and their use in OAT reactions

Substitution of a methyl by a trifluoromethyl moiety in well-known β-ketimines afforded the ligands (Ar)NC(Me)CH(2)CO(CF(3)) (HL(H), Ar = C(6)H(5); HL(Me), A r= 2,6-Me(2)C(6)H(3); HL(iPr), Ar = 2,6-(i)Pr(2)C(6)H(3)). Subsequent complexation to the [MoO(2)](2+) core leads to the formation of novel complexes of general formula [MoO(2)(L(R))(2)] (R = H, 1; R = Me, 2; R = iPr, 3). For reasons of comparison the oxo-imido complex [MoO(N(t)Bu)(L(Me))(2)] (4) has also been synthesized. Complexes 1-4 were investigated in oxygen atom transfer (OAT) reactions using the substrate trimethylphosphine. The respective products after OAT, the reduced Mo(IV) complexes [MoO(PMe(3))(L(R))(2)] (R = H, 5; R = Me, 6; R = iPr, 7) and [Mo(N(t)Bu)(PMe(3))(L(Me))(2)] (8), were isolated. All complexes have been characterized by NMR spectroscopy, and 1-4 also by cyclic voltammetry. A positive shift of the Mo(VI)-Mo(V) reduction wave upon fluorination was observed. Furthermore, molecular structures of complexes 2, 4, 5, and 8 have been determined via single crystal X-ray diffraction analysis. Complex 8 represents a rare example of a Mo(IV) phosphino-imido complex. Kinetic measurements by UV-vis spectroscopy of the OAT reactions from complexes 1-4 to PMe(3) showed them to be more efficient than previously reported nonfluorinated ones, with ligand L' = (Ar)NC(Me)CH(2)CO(CH(3)) [MoO(2)(L')(2)] (9) and [MoO(N(t)Bu)(L')(2)] (10), respectively. Thermodynamic activation parameters ΔH(?) and ΔS(?) of the OAT reactions for complexes 2 and 4 have been determined. The activation enthalpy for the reaction employing 2 is significantly smaller (12.3 kJ/mol) compared to the reaction with the nonfluorinated complex 9 (60.8 kJ/mol). The change of the entropic term ΔS(?) is small. The reaction of the oxo-imido complex 4 to 8 revealed a significant electron-donating contribution of the imido substituent.     

2-Aminoisobutyric acid in Co(II) and Co(II)/Ln(III) chemistry: homometallic and heterometallic clusters

The synthesis and magnetic properties of 13 new homo- and heterometallic Co(II) complexes containing the artificial amino acid 2-amino-isobutyric acid, aibH, are reported: [Co(II)(4)(aib)(3)(aibH)(3)(NO(3))](NO(3))(4)·2.8CH(3)OH·0.2H(2)O (1·2.8CH(3)OH·0.2H(2)O), {Na(2)[Co(II)(2)(aib)(2)(N(3))(4)(CH(3)OH)(4)]}(n) (2), [Co(II)(6)La(III)(aib)(6)(OH)(3)(NO(3))(2)(H(2)O)(4)(CH(3)CN)(2)]·0.5[La(NO(3))(6)]·0.75(ClO(4))·1.75(NO(3))·3.2CH(3)CN·5.9H(2)O (3·3.2CH(3)CN·5.9H(2)O), [Co(II)(6)Pr(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·[Pr(NO(3))(5)]·0.41[Pr(NO(3))(3)(ClO(4))(0.5)(H(2)O)(1.5)]·0.59[Co(NO(3))(3)(H(2)O)]·0.2(ClO(4))·0.25H(2)O (4·0.25H(2)O), [Co(II)(6)Nd(III)(aib)(6)(OH)(3)(NO(3))(2.8)(CH(3)OH)(4.7)(H(2)O)(1.5)]·2.7(ClO(4))·0.5(NO(3))·2.26CH(3)OH·0.24H(2)O (5·2.26CH(3)OH·0.24H(2)O), [Co(II)(6)Sm(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·[Sm(NO(3))(5)]·0.44[Sm(NO(3))(3)(ClO(4))(0.5)(H(2)O)(1.5)]·0.56[Co(NO(3))(3)(H(2)O)]·0.22(ClO(4))·0.3H(2)O (6·0.3H(2)O), [Co(II)(6)Eu(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)OH)(4.87)(H(2)O)(1.13)](ClO(4))(2.5)(NO(3))(0.5)·2.43CH(3)OH·0.92H(2)O (7·2.43CH(3)OH·0.92H(2)O), [Co(II)(6)Gd(III)(aib)(6)(OH)(3)(NO(3))(2.9)(CH(3)OH)(4.9)(H(2)O)(1.2)]·2.6(ClO(4))·0.5(NO(3))·2.58CH(3)OH·0.47H(2)O (8·2.58CH(3)OH·0.47H(2)O), [Co(II)(6)Tb(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·[Tb(NO(3))(5)]·0.034[Tb(NO(3))(3)(ClO(4))(0.5)(H(2)O)(0.5)]·0.656[Co(NO(3))(3)(H(2)O)]·0.343(ClO(4))·0.3H(2)O (9·0.3H(2)O), [Co(II)(6)Dy(III)(aib)(6)(OH)(3)(NO(3))(2.9)(CH(3)OH)(4.92)(H(2)O)(1.18)](ClO(4))(2.6)(NO(3))(0.5)·2.5CH(3)OH·0.5H(2)O (10·2.5CH(3)OH·0.5H(2)O), [Co(II)(6)Ho(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·0.27[Ho(NO(3))(3)(ClO(4))(0.35)(H(2)O)(0.15)]·0.656[Co(NO(3))(3)(H(2)O)]·0.171(ClO(4)) (11), [Co(II)(6)Er(III)(aib)(6)(OH)(4)(NO(3))(2)(CH(3)CN)(2.5)(H(2)O)(3.5)](ClO(4))(3)·CH(3)CN·0.75H(2)O (12·CH(3)CN·0.75H(2)O), and [Co(II)(6)Tm(III)(aib)(6)(OH)(3)(NO(3))(3)(H(2)O)(6)]·1.48(ClO(4))·1.52(NO(3))·3H(2)O (13·3H(2)O). Complex 1 describes a distorted tetrahedral metallic cluster, while complex 2 can be considered to be a 2-D coordination polymer. Complexes 3-13 can all be regarded as metallo-cryptand encapsulated lanthanides in which the central lanthanide ion is captivated within a [Co(II)(6)] trigonal prism. dc and ac magnetic susceptibility studies have been carried out in the 2-300 K range for complexes 1, 3, 5, 7, 8, 10, 12, and 13, revealing the possibility of single molecule magnetism behavior for complex 10.     

First X-ray characterization and theoretical study of pi-alkyne,alkynyl-hydride,and vinylidene isomers for the same transition metal fragment [Cp*Ru(PEt3)2]+

The reaction of the chloro-complex [CpRuCl(PEt(3))(2)] with acetylene gas in methanol gave the pi-alkyne complex [CpRu(eta(2)-HCtbd1;CH)(PEt(3))(2)][BPh(4)] (1), which has been structurally characterized by X-ray analysis. The alkyne complex undergoes spontaneous isomerization even at low temperature, yielding the metastable alkynyl-hydride complex [CpRu(H)(Ctbd1;CH)(PEt(3))(2)][BPh(4)] (2), as the result of the oxidative addition of the alkyne C-H bond. This compound has also been structurally characterized despite it tautomerizes spontaneously into the stable primary vinylidene [CpRu(=C=CH(2))(PEt(3))(2)][BPh(4)] (3). This species has been alternatively prepared by a two-step deprotonation/protonation synthesis from the pi-alkyne complex. Moreover, the reaction of the initial chloro-complex with monosubstituted alkynes HCtbd1;CR (R = SiMe(3), Ph, COOMe, (t)Bu) has been studied without detection of pi-alkyne intermediates. Instead of this, alkynyl-hydride complexes were obtained in good yields. They also rearrange to the corresponding substituted vinylidenes. In the case of R = SiMe(3), the isomerization takes place followed by desilylation, yielding the primary vinylidene complex. X-ray crystal structures of the vinylidene complexes [CpRu(=C=CH(2))(PEt(3))(2)][BPh(4)] (3) and [CpRu(=C=CHCOOMe)(PEt(3))(2)][BPh(4)] (10) have also been determined. Both, full ab initio and quantum mechanics/molecular mechanics (QM/MM) calculations were carried out, respectively, on the model system [CpRu(C(2)H(2))(PH(3))(2)](+) (A) and the real complex [CpRu(C(2)H(2))(PEt(3))(2)](+) (B) to analyze the steric and electronic influence of ligands on the structures and relative energies of the three C(2)H(2) isomers. QM/MM calculations have been employed to evaluate the role of the steric effects of real ligands, whereas full ab initio energy calculations on the optimized QM/MM model have allowed recovering the electronic effects of ligands. Additional pure quantum mechanics calculations on [CpRu(C(2)H(2))(PH(3))(2)](+) (C) and [CpRu(C(2)H(2))(PMe(3))(2)](+) (D) model systems have been performed to analyze in more detail the effects of different ligands. Calculations have shown that the steric effects induced by the presence of bulky substituents in phosphine ligand are responsible for experimentally observed alkyne distortion and for relative destabilization of the alkyne isomer. Moreover, increasing the phosphine basicity and sigma donor capabilities of ligands causes a relative stabilization of an alkynyl-hydride isomer. The combination of both steric and electronic effects, makes alkyne and alkynyl-hydride isomers to be close in energy, leading to the isolation of both complexes.     

From tetrahydroborate- to aminoborylvinylidene-osmium complexes via alkynyl-aminoboryl intermediates

The tetrahydroborate OsH(η(2)-H(2)BH(2))(CO)(P(i)Pr(3))(2) (1) reacts with aniline and p-toluidine to give the aminoboryl derivatives [chemical structure: see text] (R = H (2), CH(3) (3)) and four H(2) molecules. Treatment of 2 and 3 with phenylacetylene gives Os{B(NHC(6)H(4)R)(2)}(C≡CPh)(CO)(P(i)Pr(3))(2) (R = H (4), CH(3) (5)), which react with HBF(4) to afford the amino(fluoro)boryl species Os{BF(NHC(6)H(4)R)}(C≡CPh)(CO)(P(i)Pr(3))(2) (R = H (6), CH(3) (7)). In contrast to HBF(4), the addition of acetic acid to 4 and 5 induces the release of phenylacetylene and the formation of the six-coordinate derivatives Os{B(NHC(6)H(4)R)(2)}(κ(2)-O(2)CCH(3))(CO)(P(i)Pr(3))(2) (R = H (8), CH(3) (9)). The coordination number six for 4 and 5 can be also achieved by addition of CO. Under this gas Os{B(NHC(6)H(4)R)(2)}(C≡CPh)(CO)(2)(P(i)Pr(3))(2) (R = H (10), CH(3) (11)) are formed. In toluene, these alkynyl-aminoboryl compounds evolve into the aminoborylvinylidenes Os{═C═C(Ph)B(NHC(6)H(4)R)(2)}(CO)(2)(P(i)Pr(3))(2) (R = H (12), CH(3) (13)) via a unimolecular 1,3-boryl migration from the metal to the C(β) atom of the alkynyl ligand. Similarly to 4 and 5, complexes 6 and 7 coordinate CO to give Os{BF(NHC(6)H(4)R)}(C≡CPh)(CO)(2)(P(i)Pr(3))(2) (R = H (15), CH(3) (16)), which evolve to Os{═C═C(Ph)BF(NHC(6)H(4)R)}(CO)(2)(P(i)Pr(3))(2) (R = H (17), CH(3) (18)).