海底表层声场垂直衰减分析

声波在海底中的传播衰减规律是海洋声学中值得研究的课题。根据简正波理论推导了高声速海底表层声场垂直衰减系数的解析表达式,并给出了其理论上限。数值仿真与实验研究表明:对液态海底模型,海底表层声场垂直衰减系数与声波频率基本呈正比;对于特定频率,海水-海底声速比是影响垂直衰减系数的最主要因素,比值越小垂直衰减系数越大;对于斜率较大的楔形海底地形,且声源在深水区、接收点在浅水区的情形,垂直衰减系数会大大小于其理论上限。      

发展储层声学理论，创新深部钻测技术 —— “储层声学论文专栏”主编序言

“储层声学”属于多相孔隙固体介质声学的研究范畴,它是研究声波在储层中的产生、传播、接收及声波与储层相互作用及应用等的一门学问。储层声学从提出到现在有十多年的发展历史,它虽是一个年轻的声学分支,但它是在面向地震勘探和地震储层预测等基础问题上发展起来的,且在实际需求的驱动下发展迅速。储层声学要回答以下问题:声波是如何在孔隙性、裂缝性及各向异性的多相储层介质中传播的,组成储层的各组分及特性等对声波的传播是如何影响的,如何利用这些声学特征来描述储层的组分和特性以及声波引起的各种物理效应与储层是如何相互作用的。     

环状气囊水消声器声学性能的预测与分析

水消声器作为一种有效的噪声控制装置被广泛应用于水管路系统,本文分别使用模态匹配法和有限元法对环状气囊水消声器的声学性能进行仿真计算,分析气囊水消声器声学特性的原理,并研究气囊水消声器不同媒介间的特性声阻抗大小关系对消声性能的影响规律。计算结果表明：由于阻抗失配关系,在气囊水消声器中气体对声波的传递起主要反射作用。随着橡胶的特性阻抗增大,橡胶会对从水中传递过来的声波起到一定的阻碍作用。当气体体积被压缩时,气体对声波的反射衰减效果会逐渐减弱,从而使得气囊水消声器的传递损失曲线整体幅值下降,消声性能减弱。     

气泡线性振动时近海面气泡群的声散射

海洋中的不同成因的气泡群是常见的水下声学目标及声呐混响源,因此对水下气泡群进行声学建模意义重大。利用有效媒质理论描述气泡群内部的相速度及声衰减变化,并考虑到海洋中气泡群往往产生于不同界面附近,进一步利用球面波叠加原理描述海面对气泡群散射声波的再辐射,导出了平海面作用下气泡群声散射截面的一般表达式,建立了其声散射模型,研究了单一尺寸及混合尺寸气泡群的声学特性。数值分析表明,气泡群的谐振频率会随其半径或孔隙率增加而降低;由于海面的存在,气泡群声散射截面会随频率进行周期性变化,且随气泡群远离海面,这一变化逐渐加剧。此外,若气泡的黏滞阻尼项在全部阻尼项中占比较高,气泡群声散射强度会在谐振频率附近存在起伏振荡。该模型可为近海面鱼群、气泡羽流及海底泄漏的甲烷气体的声学建模提供一定的理论基础。     

地声学：一门研究海底的重要学科

地声学是一门研究海底沉积物声学特性的学科，也是一门用声学方法研究海底沉积物地学特性的学科，地声学的发展和水声学、海洋学、地质学、地球物理学及地理学等多个学科有密切的关系，对于海洋工程建设，海底资源开发及港口、航道和海防等各项海洋事业的发展重要的实用意义，文章简单介绍了国内外在地声学方面的一些工作情况，说明了地声学研究所涉及的一些主要问题，并对我国今后开展研究的方向以及应当采取的措施提出一些建议和设     

海底表层沉积物声速的环境因素影响特性

应用声速通用模型开展理论分析,结合温度-压力可控实验测量分析,研究地声反演、海底原位声学测量和采样样品声学测量3种主要的海底表层沉积物声学特性测量方法中,存在的环境因素影响机制和特性.理论计算与实验测量研究具有一致性,揭示温度和静水压力对海底表层沉积物的压缩波声速的影响机制主要是通过影响孔隙海水的密度、黏度、体积弹性模...     

声学超表面抑制Mack第2模态机理与优化设计

从理论上推导了声学超表面对平面声波的作用模型,该理论模型计及声波高阶衍射模态,从而能够计及超表面微结构之间的声学干扰.通过与数值结果对比,该模型预测的反射频率精度得到了一定程度的提高,并能够分辨出相邻孔声场之间的耦合模态.讨论了声学超表面吸声特性与阻抗特性对高超声速边界层内Mack第2模态的抑制机理,研究发现通过设计超表面阻抗特性,使得入射声波与反射声波在壁面处相位相反,同样可以抑制Mack第2模态.基于理论模型,分别优化设计得到最优的微结构几何尺寸,并通过对Mach 6平板边界层流动进行稳定性分析,验证了超表面不同声学特性的抑制效果.      

天然气水化合物的声学探测进展

天然水合物是一种未来的新型能源,与此相关的研究正日益成为能源勘探领域的热点。本文对 天然水合物及其特点、分布和探测技术进行了简要的介绍,在此基础上从声学技术研究角度出发, 介绍了声波测井、地震探测、海底地貌声波检测技术等在探测天然水合物中的应用;并探讨了声学方 法和技术在评价天然水合物储层方面的研究内容、进展和侧重点。     

声波在水-含气沉积物界面的反射

含气泡海洋沉积物的声学特性是海底探测的重要问题。为了研究气泡存在对水-含气沉积物界面声反射系数的影响,本文基于气泡振动修正的Biot波动方程推导了气泡存在修正的Biot弹性模量,并结合水-沉积物界面的“开孔”边界条件推导了声波从水入射到水-含气沉积物界面的反射系数。数值分析表明气泡的振动导致反射系数呈现显著的频率特性。在气泡共振频率附近,由于气泡的共振引发的强散射和强衰减,使得反射系数很大,无论以何种角度入射,声波都很难进入含气泡的沉积物。本文研究结果表明,气泡半径、含量、声波频率以及入射角度都是影响水-含气沉积物界面反射系数的主要因素。      

格子Boltzmann方法应用于气动声学研究

应用格子Boltzmann方法(LBM)对不同类型的气动声学问题进行数值研究.通过模拟一维平面声波和二维点源声波的传播,得到沿传播方向的声压脉动,其振荡幅值和衰减趋势与理论值相吻合.其次进行声波衍射和干涉现象的数值模拟.最后,模拟处于流场中运动声源辐射声场的多普勒效应.模拟结果说明LBM方法能较好地模拟低马赫数下的声学问题,包括声压脉动的传播,声波的波动特性以及流动与声波间的相互作用.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.