Permeability of C60 films deposited on polycarbonatesyloxane to N2, O2, CH4, and He gases

In this study, we report on the gas permeability of non-polymerized and polymerized fullerene films (thickness about 0.5 μm) grown on an organic polymer substrate, polycarbonatesyloxane (PCS), using a high vacuum deposition method. The photopolymerized C₆₀ films were prepared by a simultaneous thin film deposition and UV-vis irradiation method which was reported previously [V.A. Karachevtsev, P.V. Mateichenko, N.Y. Nedbailo, A.V. Peschanskii, A.M. Plokhotnichenko, O.M. Vovk, E.N. Zubarev, A.M. Rao, Carbon 42 (2004) 2091]. Raman spectroscopy revealed that ∼90% of the C₆₀ molecules are covalently linked to neighboring C₆₀ molecules in the photopolymerized film after 20 h of film deposition/irradiation. Permeability of the resulting membranes consisting of polymer PCS base and fullerene films to the N₂, O₂, CH₄, and He gases has been investigated. Our experiments revealed that the gas permeability properties are dependent on the age of the membrane. In particular, the aged membrane exhibited an enhanced permeability for O₂ and He gases in comparison to N₂ and CH₄, respectively.     

Synthesis and characterization of ZrO2/MnO2/carbon clusters nanocomposite materials

Nano-sized ZrO₂/MnO₂/carbon clusters composite materials has been successfully obtained by the calcination of a Zr(acac)₄/Mn(acac)₃/epoxy resin complex under an oxygen atmosphere. The compositions of the resulting composite materials were determined using inductively coupled plasma (ICP) spectroscopy, elemental analysis and surface characterization by X-ray diffraction (XRD), scanning electron microscopy and transmission electron microscopy (TEM). The ultraviolet–visible (UV–VIS), X-ray photoelectron spectra (XPS) and electron spin resonance (ESR) spectra of the composites were also measured. ESR spectral examinations suggest the possibility of an electron transfer in the process of MnO₂ → carbon clusters → ZrO₂. The visible light-responsive oxidation–reduction ability of the calcined material was also investigated.     

Fabrication of ZnO/Al2O3 core-shell nanostructures and crystalline Al2O3 nanotube

We have demonstrated the crystalline ZnO-Al₂O₃ core-shell nanowire structure by atomic layer deposition (ALD) at a temperature 100 °C. The core-shell structure could have potential applications in the fabrication of ZnO field effect transistor. After dissolving the ZnO core, shape defined, rigid and robust crystalline Al₂O₃ shelled nanostructures have been fabricated. Nanowire ZnO nanostructures have been replicated by alumina shell. This is one of the most effective techniques for producing core-shell or shell/hollowed nanostructures of any desired objects. The Al₂O₃ shelled nanostructures could have potential applications as space confined nanoreactors, drug delivery, nanofluidic channels and optical transmitting.     

Synthesis and characterization of thermoluminescent glass-ceramics Li2O-Al2O3-SiO2:CeO2

Vitroceramic powders of Li₂O-Al₂O₃-SiO₂ systems (LAS), doped with 1% (LAS:1Ce) and 10% (LAS:10Ce) molar of cerianite (CeO₂) were synthesized by means of the gelification technique of metal formates of aluminum and lithium, in the presence of tetraethoxy silane and CeO₂. The gels obtained were dried (120 °C, 2.5 h), calcined (480 °C, 5 h) and sinterized (1250 °C, 30 min). The sinterized samples were characterized by X-ray difraction (XRD), scanning electron microscopy (SEM) and microchemical analysis (EDS). There is evidence for a mixture of two phases of 64% β-spodumene (Li₂O-Al₂O₃-4SiO₂) and 36% β-eucryptite (Li₂O-Al₂O₃-2SiO₂). The LAS:1Ce system was enriched in aluminum, the LAS:10Ce system showed areas of heterogeneous composition; some regions with a shortage of CeO₂, while others zones with cerium cumulus. From the microscopy images it was found that CeO₂ acts as a densificant agent in LAS system, favoring the sintering in the host. The chemical route and the sintering processes utilized allow the production of samples exhibiting an acceptable linear correlation between total thermoluminescent emission intensity and the irradiation dose when the CeO₂ concentration is low (less than 1%), opening the possibility of using this kind of glass-ceramic in dosimetry.     

Effect of rare earth (Pr2O3, Nd2O3, Sm2O3, Eu2O3, Gd2O3 and Er2O3 ) on the acoustic properties of glass belonging to bismuth-borate system

Bismuth-borate glasses doped with some rare earth ions were studied with respect to the density, molar volume and the elastic moduli, Poisson’s ratio, Debye temperature, microhardness, softening temperature, acoustic impedance, diffusion constant and latent heat of melting. Ultrasonic velocities were measured by the pulse echo overlap technique at a frequency of 10 MHz and at room temperature. From these velocities and density values, various elastic moduli were calculated. The correlation of elastic stiffness, the cross link density, and the fractal bond connectivity of these glasses are discussed. The derived experimental values of shear modulus, bulk modulus, Young’s modulus, and Poisson’s ratio for our glasses are compared with the theoretically calculated values in terms of the bond compression model and Makishima-Mackenize theory.     

Fabrication of NiCo2O4 nanofibers by electrospinning

The spinel NiCo₂O₄ nanofibers with diameters of 50-100 nm were prepared by high temperature calcinations of a simple inorganic-polymer composite fibers, which were obtained by electrospinning of the PVA/cobalt acetate/nickel acetate composite precursor. The crystallinity, purity, and surface morphology of the as-prepared NiCo₂O₄ nanofibers were investigated by XRD, FT-IR, SEM, respectively.     

Preparation and characterization of SiO2/ZrO2/Ag multicoated microspheres

A new type of multicoated silica/zirconia/silver (SiO₂/ZrO₂/Ag) core-shell composite microspheres is synthesized in this paper. In the process, ZrO₂-decorated silica (SiO₂/ZrO₂) core-shell composites were firstly fabricated by the modification of zirconia on silica microspheres through the hydrolysis of zirconium precursor. Subsequently, on SiO₂/ZrO₂ composite cores, silver nanoparticles were introduced via ultrasonic irradiation and acted as “Ag seeds” for the formation of integrate silver shell by further reduction of silver ions using formaldehyde as reducer. The resulting samples were characterized by transmission electron microscopy, X-ray diffraction, Fourier-transform infrared, energy-dispersive X-ray, and UV-vis spectroscopy, indicating that zirconia and silver layers were successfully coated on the surfaces of silica microspheres.     

Preparation and electrochemistry of one-dimensional nanostructured MnO2/PPy composite for electrochemical capacitor

One-dimensional nanostructured manganese dioxide/polypyrrole (MnO₂/PPy) composite was prepared by in situ chemical oxidation polymerization of pyrrole in the host of inorganic matrix of MnO₂, using complex of methyl orange (MO)/FeCl₃ as a reactive self-degraded soft-template. The morphology and structure of the composite were characterized by infrared spectroscopy (IR) X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the MnO₂/PPy composite consists of α-MnO₂ and PPy with nanotube-like structure. Electrochemical properties of the composite demonstrated the material showed good electrochemical reversibility after 500 charge-discharge cycles in the potential range of −0.4 to 0.6 V, the tube-like nanocomposite has the potential application in electrochemical capacitor.     

Synthesis and characterization of a novel magnetic carrier with its composition of Fe3O4/carbon using hydrothermal reaction

In this study, a simple method to prepare a novel magnetic carrier based on carbon matrix has been built by heating the aqueous solution of glucose and oleic acid-stabilized Fe₃O₄ nanoparticle at 170 °C for 3 h. The results show that the surface hydrophobic modification of Fe₃O₄ nanoparticle is necessary for the successful synthesis of Fe₃O₄/C nanocomposition, and a possible formation mechanism of Fe₃O₄/C nanocomposition was presented. The influence of the reaction parameters such as the concentration of oleic acid-stabilized Fe₃O₄ nanoparticle, the reaction time, etc. on the product was also investigated. In the typical reaction (2.5 g/L of oleic acid-stabilized Fe₃O₄ nanoparticle, 0.5 M of glucose), Fe₃O₄/C nanocompositions with the average diameter in the range 100–200 nm were obtained and its saturation is 12.4 emu/g. In order to characterize Fe₃O₄/C nanocompositions, XPS, XRD, FT–IR, and Mössbauer spectra were employed.     

A comparative study of dielectric and Raman spectroscopy of Pb(Y b1/2Ta1/2)O3 and Pb(Y b1/2Nb1/2)O3

A comparative study of the properties of two highly ordered lead based complex perovskites Pb(Y b_1/2Ta_1/2)O₃ and Pb(Y b_1/2Nb_1/2)O₃ has been carried out through x-ray diffraction, dielectric and Raman scattering measurements. These two compounds differ significantly in their structure, dielectric response and phonon vibration although the ionic radii and valencies are same for Ta and Nb. The room temperature x-ray diffraction pattern and Raman spectra show that the symmetry of lead ytterbium tantalate is lower than that of lead ytterbium niobate. The Raman spectra of Pb(Y b_1/2Ta_1/2)O₃ also indicates the presence of local distortion in the lattice which may be one of the factors responsible for the existence of a secondary transition.     

Fabrication and characterization of GaN/amorphous Ga2O3 nanocables through thermal oxidation

In an effort to obtain one-dimensional core/shell nanostructures, thermal oxidation behavior of GaN nanowires in O₂ with N₂ ambients was investigated by x-ray diffraction, transmission electron microscopy, and x-ray photoelectron spectroscopy. Crystallinity and chemical bonding states of the oxidized surface in the GaN nanowires were strongly dependent on the oxidation temperature. Chemical oxidation reaction occurred upon increasing the temperature, accompanied by the formation of an amorphous Ga₂O₃ layer at the GaN nanowire surface at 900 ^°C. The XPS analyses provided further evidence supporting the change in the chemical bonding states with increasing oxidation temperature.     

Preparation and characterization of amine-functionalized SiO2/TiO2 films for formaldehyde degradation

This paper investigated the gaseous formaldehyde degradation by the amine-functionalized SiO₂/TiO₂ photocatalytic films for improving indoor air quality. The films were synthesized via the co-condensation reaction of methyltrimethoxysilane (MTMOS) and 3-aminopropyltrimethoxysilane (APTMS). The physicochemical properties of prepared photocatalysts were characterized with N₂ adsorption/desorption isotherms measurement, X-ray diffraction (XRD) and Fourier Transform Infrared spectroscopy (FT/IR). The effect of amine-functional groups and the ratio of MTMOS/APTMS precursors on the formaldehyde adsorption and photocatalytic degradation were investigated. The results showed that the formaldehyde adsorption and photocatalytic degradation of the APTMS-functionalized SiO₂/TiO₂ film was higher than that of SiO₂/TiO₂ film due to the surface adsorption on amine sites and the relatively high of the specific surface area of the APTMS-functionalized SiO₂/TiO₂ film (15 times higher than SiO₂/TiO₂). The enhancement of the formaldehyde degradation of the film can be attributed to the synergetic effect of adsorption and subsequent photocatalytic decomposition. The repeatability of photocatalytic film was also tested and the degradation efficiency was 91.0% of initial efficiency after seven cycles.     

Electrical transport and high thermoelectric properties of PbTe doped with Bi2Te3 prepared by HPHT

In this paper, n-type lead telluride (PbTe) compounds doped with Bi₂Te₃ have been successfully prepared by high pressure and high temperature (HPHT) technique. The composition-dependent thermoelectric properties of PbTe doped with Bi₂Te₃ have been studied at room temperature. The figure-of-merit, Z, for PbTe is very sentivite to the dopants, which could be improved largely although the doped content of Bi₂Te₃ is very small (<0.08 mol%). In addition, the maximum value reaches to 9.3×10⁻⁴ K⁻¹, which is about 20% higher than that of PbTe alloyed with Bi₂Te₃ sintered at ambient pressure (7.6×10⁻⁴ K⁻¹) and several times higher than that of small grain size PbTe containing other dopants. The improved thermoelectric performance in this study may be due to the effect of high pressure and the low lattice thermal conductivity resulting from Bi₂Te₃ as source of dopants.     

A facile one-pot solvothermal route to tubular forms of luminescent polymeric networks [(C3N3)2(NH)3]n

A facile one-pot solvothermal route has been developed for the synthesis of tubular luminescent polymeric networks [(C₃N₃)₂(NH)₃]_n, structurally related to the proposed g-C₃N₄. XRD patterns showed a characteristic 002 basal plane diffractions, indicating an interlayer d spacing of 3.23 Å. XPS spectra show that the C1s and N1s have a symmetric peak and an asymmetric peak at 288.10 and 399.00 eV, respectively. The bulk composition C₆N_8.9H_4.5 determined by elemental analysis is comparable to the calculated value C₆N₉H₃ for this proposed polymer. FTIR spectra indicated the presence of s-triazine ring, which was further supported by the luminescent and UV-vis absorption characteristics probably depending on π→π^* electronic transition. The tubular structure has been studied by TEM, SAED, and HREM.     

Effects of titania different phases on the microstructure and properties of K2Ti6O13 nanowires

Potassium titanate nanowires have been synthesized by a hydrothermal method using anatase and brookite nanocrystallites, respectively, as precursors. The corresponding products, alpha- and beta-K₂Ti₆O₁₃ nanowires, have distinct differences in structure and properties. Under the same conditions, the amount of K intercalated into anatase TiO₂ is larger than that into brookite TiO₂. The multiple types of reserved short Ti-O bonds in beta-K₂Ti₆O₁₃ confined the growth of nanowires along the [010] orientation and made the beta-K₂Ti₆O₁₃ nanowires stubby. The UV-vis absorption spectrum of beta-K₂Ti₆O₁₃ nanowires showed strong and wide absorption in the ultraviolet and visible region. Beta-K₂Ti₆O₁₃ is thermodynamically more stable than alpha-K₂Ti₆O₁₃.     

Gd-doping of HfO2

An increase in the density of states between the oxygen 2p bands and the Fermi level is seen with increasing Gd concentrations. In addition, for the Gd-doped HfO₂ films, the Gd 4f photoexcitation peak at 5.5 eV below the valence band maximum was identified using resonant photoemission. Electrical measurements show pronounced rectification properties for lightly-doped Gd:HfO₂ films on p-Si and for heavily-doped Gd:HfO₂ films on n-Si, suggesting a crossover from n-type to p-type behavior with increasing doping level. In addition, there is an increase in the reverse bias current with neutron irradiation.     

Room temperature synthesis and characterization of NaEuF4 nanorods and Na5Eu9F32 nanospheres

A simple solution-based route was used to selectively synthesize two ternary metal fluoride NaEuF₄ nanorods with hexagonal structure and Na₅Eu₉F₃₂ nanospheres with cubic structure at room temperature. It is found that NaEuF₄ nanorods can be transformed into Na₅Eu₉F₃₂ nanospheres with the increasing the reaction time in the presence of excessive NaF. The luminescence properties of these two metal fluorides were investigated and the possible formation mechanism was discussed.     

ZnO-Fe3O4 composite prepared by sol-gel method with H2 deoxidation

Fe doped ZnO powder samples (Fe/Zn=0.05 and 0.1) were prepared by sol-gel method with H₂ deoxidation at 450 ^°C for several hours or just heated in air at the same temperature. It was showed by vibrating sample magnetometer (VSM) that samples heat treated in H₂ could show strong ferromagnetism at room temperature while samples treated in air only show very weak magnetism. XRD using Co kα X-ray revealed that the samples heated in H₂ were not pure phase but like a granular system and the magnetism mainly results from Fe₃O₄ in samples while samples heated in air showed pure ZnO phase. Our work indicated that H₂ deoxidation treatment may be an effective technique to fabricate such magnetic semiconductor-like materials with Curie temperature higher than room temperature.     

Synthesis and photoluminescence properties of Bi2S3 nanowires via surfactant micelle-template inducing reaction

Single-crystalline Bi₂S₃ nanowires, with diameters in the range of 80-200 nm and lengths up to tens of micrometers, have been successfully synthesized through surfactant micelle-template inducing reaction at ambient-pressure and low-temperature. The synthetic route is simple, effective and can provide great opportunities for both fundamental and technological applications. The optical properties of the Bi₂S₃ nanowires with different diameters were firstly examined by means of photoluminescence spectroscopy at room temperature. The representative photoluminescence spectrum exhibits a great blue-shift from the band gap of 1.30 eV of bulk Bi₂S₃ to high energy of 1.44 eV, which indicated that these nanostructures showed quantum confinement effects.     

Facile synthesis and electrochemical properties of hierarchical MnO2 submicrospheres and LiMn2O4 microspheres

Hierarchical MnO₂ submicrospheres have been successfully synthesized by a wet chemical method. The as-prepared products were characterized by means of XRD, SEM, FTIR, TG, and TEM. With the as-prepared MnO₂ submicrospheres as precursors, LiMn₂O₄ microspheres were conveniently prepared by a simple solid-state reaction between MnO₂ and LiOH at a temperature as low as 600 °C. Electrochemical properties of the as-prepared MnO₂ submicrospheres and LiMn₂O₄ microspheres as cathode materials in lithium ion cells were investigated by galvanostatic charge/discharge tests.