Analytical potential of 6-oxy-(N-succinimidyl acetate)-9-(2'-methoxycarbonyl) fluorescein for the determination of amino compounds by capillary electrophoresis with laser-induced fluorescence detection

The analytical potential of a fluorescein analogue, 6-oxy-(N-succinimidyl acetate)-9-(2'-methoxycarbonyl) fluorescein (SAMF), for the first time synthesized in our laboratory, as a labeling reagent for the labeling and determination of amino compounds by capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection was investigated. Biogenic monoamines and amino acids were chosen as model analytes to evaluate the analytical possibilities of this approach. The derivatization conditions and separation parameters for the biogenic amines were optimized in detail. The derivatization was performed at 30 degrees C for 6 min in boric acid buffer (pH 8.0). The derivatives were baseline-separated in 15 min with 25 mM boric acid running buffer (pH 9.0), containing 24 mM SDS and 12.5% v/v acetonitrile. The concentration detection limit for biogenic amines reaches 8 x 10(-11) mol.L(-1) (signal-to-noise ratio = 3). The application of CE in the analysis of the SAMF-derivatized amino acids was also exploited. The optimal running buffer for amino acids suggested that weak acidic background electrolyte offered better separation than the basic one. The proposed method was applied to the determination of biogenic amines in three different beer samples with satisfying recoveries varying from 92.8% to 104.8%. Finally, comparison of several fluorescein-based probes for amino compounds was discussed. With good labeling reaction, excellent photostability, pH-independent fluorescence (pH 4-9), and the resultant widely suited running buffer pH, SAMF has a great prospect in the determination of amino compounds in CE.     

Separation and determination of denatured alpha(s1)-, alpha(s2)-, beta- and kappa-caseins by hydrophobic interaction chromatography in cows', ewes' and goats' milk,milk mixtures and cheeses

Caseins alpha(s1)-, alpha(s2)-, beta- and kappa- from raw cows', ewes' and goats' milk were separated and determined by hydrophobic interaction chromatography (HIC) by using a Propyl column (Eichrom) in the presence of 8.0 M urea in the mobile phase. The method is based on fast and easy solubilization of real raw samples by 4.0 M guanidine thiocyanate followed by the HIC analysis, without any preliminary precipitation or separation of the casein fraction. Elution conditions have been optimized by analyzing commercial single bovine standard caseins and their mixture. In the optimized chromatographic conditions the four casein fractions were separated in less than 45 min. A linear relationship between the concentration of casein and peak area (UV absorbance detector at 280 nm) has been obtained over the concentration range of 0.5 to 40 microM. The detection limit for alpha-, beta- and kappa-caseins ranged between 0.35 and 0.70 microM. The precision of the method was evaluated, the coefficient of variation for alpha-, beta- and kappa-casein determination ranging between 3.0 and 6.0%. The method has been validated by the analysis of reference skim milk powder (BCR-063R) certificated for total nitrogen content. The method was applied to commercial casein mixture and to the qualitative and quantitative analysis of casein fractions in unprocessed, raw cows', goats' and ewes' milk (10 samples analyzed for each species), in one sample of unprocessed buffalos' milk and in commercial cheeses (mozzarella, robiola, ricotta and stracchino). Binary mixtures of milk (cow/goat and cow/ewe) were also analyzed and the ratio between casein peak areas (alpha(s1)/kappa, alpha(s2)/beta, beta/kappa and alpha(s2)/alpha(s1)) of the HIC chromatograms was proposed and discussed in order to evaluate a possible application of this method to detect milk adulteration.     

高效液相色谱法分离测定牦牛乳中的8种蛋白质

建立了同时分离和测定牦牛乳中4种酪蛋白和4种乳清蛋白的反相高效液相色谱方法。脱脂牦牛乳经分散剂处理后,采用C4色谱柱(250 mm×4.6 mm,300,5μm i.d.)进行分离,以0.1%的三氟乙酸水溶液和0.1%的三氟乙酸乙腈溶液为流动相,流速为0.8 mL/min,梯度洗脱,二极管阵列检测器(DAD)在220nm波长下检测,外标法定量。结果表明,牦牛乳中8种主要蛋白质在40 min内完全分离,在各自的线性范围内呈良好线性,除α-乳白蛋白外,其余7种蛋白的相关系数均大于0.99。8种蛋白质的回收率为86%～103%,相对标准偏差(RSDs)为1.7%～8.7%;检出限(LODs)为10.7～39.2 mg/L,定量下限(LOQs)为35.7～130.7 mg/L。该方法的准确度和精密度均较高,能够满足实际检测的要求。     

Large Volume Sample Stacking (LVSS) in Capillary Electrophoresis (CE) with Response Surface Methodology (RSM) for the Determination of Phenolics in Food Samples

Abstract

A capillary electrophoresis method with large volume sample stacking (CE-LVSS) has been developed and validated for the simultaneous determination of seven phenolic compounds: naringin, rutin, carnosic acid, apigenin, quercetin, morin, and chichoric acid. Optimization was carried out by response surface methodology and a set of 20 experiments helped to optimize the parameters such as the concentration of buffer, buffer pH, and applied voltage. Analytes were separated using a 50?µm diameter capillary with 56?cm effective length and an extended light path using 20?mM borate buffer at pH 9.2. The LVSS method was optimized and a three- to fivefold improvement in detectability was achieved with injection at 100 mbar for 20?s followed by polarity switching at –20?kV for 6?s. The linearity values of all seven analytes were observed in the concentration ranges from 0.5 to 50?µg/mL for CE and 0.1 to 25?µg/mL for LVSS. The limits of detection were from 0.012 to 0.241 and 0.003 to 0.086?µg/mL for CE and LVSS. The obtained limits of quantitation were within 0.041 to 0.802 for CE and 0.012 to 0.286?µg/mL for LVSS. The recoveries were between 91.1 and 109.8% and 96.3 and 108.4% for CE and LVSS, respectively. The developed method has been successfully applied for the quantitative determination of analyzed components from food samples that are important sources of these compounds.     

Development and validation of an on-line two-dimensional reversed-phase liquid chromatography-tandem mass spectrometry method for the simultaneous determination of prostaglandins E(2) and F(2alpha) and 13,14-dihydro-15-keto prostaglandin F(2alpha) levels in human plasma

We developed and validated an on-line reverse-phase two-dimensional LC/MS/MS (2D-LC/MS/MS) system for simultaneous determination of the levels of prostaglandin (PG) E(2) as well as PGF(2alpha) and its metabolite 13,14-dihydro-15-keto PGF(2alpha) (F(2alpha)-M) in human plasma. Analytes were extracted by a three-step solid-phase extraction. Samples were then analyzed by on-line 2D-LC/MS/MS with electrospray ionization in negative mode. The 2D-LC system is composed of two reverse-phase analytical columns with a trapping column linking the two analytical columns. While an acidic buffer was used for both separation dimensions, differing organic solvents were employed for each dimension: methanol for the first and acetonitrile for the second to increase resolving power. The 2D-LC/MS/MS method was highly selective and sensitive with a significantly lower limit of quantitation (0.5 pg/mL for PGE(2) and 2.5 pg/mL for PGF(2alpha) and F(2alpha)-M, respectively). Linearity of the 2D-LC/MS/MS system was demonstrated for the calibration ranges of 0.5-50 pg/mL for PGE(2) and 2.5-500 pg/mL for PGF(2alpha) and F(2alpha)-M, respectively. Acceptable precision and accuracy were obtained throughout the calibration curve ranges. This highly selective and sensitive method was successfully utilized to determine the endogenous levels of PGE(2), PGF(2alpha), and F(2alpha)-M in plasma samples from six (four male and two female) normal volunteers. The mean concentrations for each analyte were 0.755 pg/mL for PGE(2), 5.70 pg/mL for PGF(2alpha) and 9.48 pg/mL for F(2alpha)-M.     

Fast speciation analysis of iodophenol compounds in river waters by capillary electrophoresis-inductively coupled plasma-mass spectrometry with off-line solid-phase microextraction

An analytical methodology for the fast separation and determination of iodophenol species in natural water samples was developed using capillary electrophoresis (CE) coupled to inductively coupled plasma-mass spectrometry (ICP-MS). Based on the element-specific and highly sensitive detection provided by ICP-MS, the methodology has been applied to the analysis of 2-iodophenol, 4-iodophenol, and 2,4,6-triiodophenol. The use of solid-phase microextraction (SPME), after proper optimization, improved the signal by a factor of 100 leading to detection limits in the sub microg.L(-1). Different desorption conditions of iodophenol compounds from the SPME microfiber were studied to achieve the optimum preconcentration factor and best analytical performance. Different CE conditions were studied to achieve complete baseline separation of iodophenols in short migration times. Three different CE buffer systems were evaluated using ICP-MS detection. A buffer solution containing 20 mmol.L(-1) 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS) and an applied potential of +22 kV were finally selected leading to a maximum separation time of 6.6 min. A relative standard deviation (%RSD) of about 5.0% for ten consecutive determinations was obtained. Finally, the speciation methodology developed was utilized for the determination of iodophenol compounds in natural water samples.     

Speciation of Co(II), Co(III), and Cu(II) in ethylenediamine solutions by capillary electrophoresis

A capillary electrophoretic (CE) method for the speciation of Co(II), Co(III), and Cu(II) in electroless copper-plating baths containing ethylenediamine (En) has been developed. The method is based on the selective pre-capillary derivatization of Co(II) with 1,10-phenanthroline (Phen) followed by CE separation of stable [CoPhen(3)](2+), [CoEn(3)](3+), and [CuEn(2)](2+) chelates. The proposed derivatization procedure protects Co(II) from oxidation by dissolved oxygen and enables rapid determination of all three metal species within a single run. The optimized separations were carried out in a fused silica capillary (57 cmx75-microm I.D.) filled with an ethylenediamine sulfate electrolyte (20 mmol L(-1) H(2)SO(4), pH 7.0 with En, applied voltage +30 kV) using direct UV detection at 214 nm. The detection limits for a signal-to-noise ratio of 3 and 10 s, hydrodynamic injections were 5x10(-6) mol L(-1) for Cu(II), 1x10(-6) mol L(-1) for Co(III), and 4x10(-7) mol L(-1) for Co(II). Application of the method to the speciation of Co(II), Co(III), and Cu(II) in copper-plating bath samples is also demonstrated.     

Determination of lasalocid with sensitized terbium(III) luminescence detection

The luminescence of the lasalocid-terbium(III) system in the presence of Triton X-100 and trioctylphosphine oxide has been studied by obtaining kinetic and equilibrium measurements and using the stopped-flow mixing technique. The initial rate and luminescence signal of this system are directly proportional to the lasalocid concentration, which allows one to develop very simple, fast, automatic methods for the determination of this analyte. Kinetic and equilibrium data can be obtained in only 0.1 and 10 s, respectively. The calibration graphs were linear over the range 0.004-5.0 mug ml(-1) (kinetic method) and 0.01-5.0 mug ml(-1) (equilibrium method) and the detection limits achieved were 1 and 3 ng ml(-1), respectively, equivalent to 2 and 6 ng g(-1) lasalocid in a chicken liver sample, which are similar to those afforded by the chromatographic methods described for this determination. The relative standard deviation of both methods was close to 2%. The analytical recoveries obtained by applying the kinetic and equilibrium methods to drinking water, poultry feed and chicken liver samples ranged from 95.6 to 102.1% and from 95.9 to 104.9%, respectively.     

Analysis of leachable and total trace metals in air particulate matters by capillary electrophoresis

A new analytical procedure was developed for simultaneous determination of ammonium, leachable and total metals in fine and coarse air particulate matters using a new capillary electrophoresis (CE) procedure, with a new buffer system containing 10 mM histidine, 2 mM 18-crown-6 and 8 mM lactic acids with pH adjusted to 4.0. A two complexes system, 18-crown-6 ether and lactic acid, was developed to solve the co-migration problem of NH(4)(+) and K(+) and to give satisfactory separation of transition metals. Satisfactory separation and quantitation of NH(4)(+), K(+), Ca(2+), Na(+) , Mg(2+) and Zn(2+) were obtained using the CE procedure developed for both leachable and total metals in coarse (10-3 mum) and fine (<3 mum) air particulate matters. Wide working ranges (ppb to ppm range) and sensitive detection limits (ppb) were obtained for the cations investigated. The reliability was established by parallel method comparison with the ICP-AES method. The analytical procedure developed is shown to provide a quick, sensitive, precise and economic method for simultaneous determination of ammonium, leachable and total metals in air particulate matters.     

Comparison of a non-aqueous capillary electrophoresis method with high performance liquid chromatography for the determination of herbicides and metabolites in water samples

A method of capillary electrophoresis (CE) for the determination of triazine herbicides and some of their main metabolites in water samples has been developed. The proposed CE method includes an off-line solid-phase extraction (SPE) procedure with LiChrolut EN sorbent coupled to a non-aqueous capillary electrophoresis (NACE) separation with UV detection. The target compounds were the chloro-s-triazines simazine, atrazine, propazine; the methyltio-s-triazines ametryn and prometryn and three main derivatives from the atrazine degradation products; namely, deethylatrazine, deethylhydroxyatrazine and deisopropylhydroxyatrazine. The analytical characteristics of the CE method are reported. The repeatability of the method was studied considering the different steps of the method separately in order to determine the contributions of each step to the total variability of the method. The NACE-UV results are compared with those obtained with a high performance liquid chromatography with UV detection (HPLC-UV) method. The same off-line SPE procedure was applied to both techniques. The results obtained show that both methods afford the same results in the analysis of surface and drinking water samples, with a level of significance regarding the F- and t-tests greater than 0.05 in all the cases. The detection limits in surface water samples were in the 0.04-0.32 microg l(-1) and 0.11-1.2 microg l(-1) ranges for the NACE-UV and HPLC-UV methods, respectively. The recoveries (spiked/found) were significantly 100% in all cases.     

Evaluation of a radioimmunoassay of alpha 1-microglobulin (alpha 1-m) with simplified procedures

A newly established double antibody radioimmunoassay (RIA) was fundamentally and clinically evaluated. Original procedures were partially modified as follows: Sample volume for serum and urine was changed to 25 microliters, and thus 200 mg/l of alpha 1-m standard was prepared using 50 microliters of original standard solution (100 mg/l). The results were satisfactory in sensitivity (0.3 mg/l obtained from -2SD method), intra-assay precision with its coefficient variation (CV) ranging from 3.0 to 7.4%, interassay precision with its CV ranging from 3.0 to 10.7%, and recovery with the mean value of 102.4% in serum and 108.2% in urine respectively. There were no changes about alpha 1-m value between diluted (2 times) and undiluted with high concentration samples. Normal levels of alpha 1-m were less than 25 mg/l in serum and less than 10 mg/l in urine. The present results indicate that the determination of alpha 1-m could be very simple and useful for the most sensitive screening test for the evaluation of renal function.     

Simultaneous determination of Cu(II) and Ag(I) on SP Sephadex C25 as complexes with 1-phenyl-1,2-propanedione-2-oximethiosemicarbazone by derivative spectrophotometry

A simple, rapid, and sensitive method has been developed for the simultaneous determination of trace amounts of copper and silver using 1-phenyl-1,2-propanedione-2-oximethiosemicarbazone (PPDOT) as a chromogenic reagent. The proposed method was based on retention and preconcentration of the complexes Cu(III)-PPDOT and Ag(I)-PPDOT on a solid phase in acid medium. The complexes were quantitatively retained in the cation exchanger SP Sephadex C25, and the analytical measurements were executed directly in the solid phase by derivative spectrophotometry. In this simultaneous determination, the second derivative and the zero crossing method were used. The determination of copper and silver was carried out to 321.0 and 427.0 nm, respectively. In order to obtain quantitative recoveries of the metal ions, various experimental analytical parameters, such as pH, stirring time, volume, and amount of solid phase, were optimized. The effect of interfering ions on the determination was described. The recovery values for Cu(II) and Ag(I) were found to be > 98%, and the relative standard deviation was < or = 2%. The detection limits (3sigma criterion) for Cu(II) and Ag(I) were found to be 0.9 x 10(-8) and 13 x 10(-8) M, respectively. The developed method was utilized for preconcentration and determination of Cu(II) and Ag(I) in industrial effluents and natural water samples. The results were consistent with those provided by inductively coupled plasma/mass spectrometry.     

Spectrophotometric determination of manganese by using redox reaction of tris(2,2'-bipyridine)osmium(II) with Mn7+.

This paper reports on the analytical application of the oxidation reaction of [Os(bpy)3]2+ by Mn7+ (MnO4-). The present study developed a very simple, sensitive and selective spectrophotometric method for the determination of manganese in an acidic medium. Three analytical wavelengths were employed in the UV and visible regions at 290, 315 and 480 nm. Beer's law was obeyed up to a concentration of 330 ng ml(-1) of Mn7+ at different wavelengths with regression equations 0.001 - 0.0042C(Mn), 0.001 + 0.0021C(Mn), and 0.001 - 9.34 x 10(-4)C(Mn) at 290, 315 and 480 nm, respectively. Under the optimum conditions, the achieved detection limits were 0.72, 1.37 and 3.32 ng ml(-1) at 290, 315, and 480 nm, respectively. In addition to the high sensitivity of the method (0.24 ng cm(-2) at 290 nm, 0.45 ng cm(-2) at 315 nm and 1.0 ng cm(-2) at 480 nm), it can be used for the determination of manganese in the presence of a large number of anions and cations, since it tolerates most of the potential interferents. The relative standard deviation was 0.5% (n = 11) for 90 ng ml(-1) manganese. The method was successfully applied to the determination of manganese in water from different resources.     

Simultaneous separation of ergot alkaloids by capillary electrophoresis after cloud point extraction from cereal samples

A new and sensitive analytical methodology for ergot alkaloids (EA) determination from cereal samples based on cloud point extraction (CPE) prior to CE‐UV absorbance was developed. The methodology involves extraction under acid conditions and subsequent preconcentration by applying a simple, rapid and environmentally friendly low volume surfactant extraction procedure. After extraction, CE analysis was carried out by performing dilutions on preconcentrated surfactant rich phase, achieving a single peak or simultaneous alkaloids determination. A real preconcentration factor of 22 of total EA was obtained, demonstrating the efficiency of this methodology. The limits of detection were 2.6 and 2.2 μg/kg for ergotamine and ergonovine, respectively. Validation procedure revealed suitable linearity, accuracy and precision. The average extraction and clean‐up recoveries were compared with the theoretical values and were better than 92%. This method was successfully applied to the determination of EA in different varieties of commercial flour samples, two grain samples and one of the leading brands cereal‐based product for infant feeding. The high sensitivity achieved for EA determinations in real samples suggests CPE procedure as an interesting approach to improve CE‐UV visible detection limits. Moreover, the whole process could be considered as a contribution to green chemistry because nonorganic solvents were involved, demonstrating its great potential over conventional techniques.     

Interaction of 2-chloronaphthalene with high carbon iron filings (HCIF): adsorption, dehalogenation and mass transfer limitations

Interaction of 2-chloronaphthalene (2-CN) with high-carbon iron filings (HCIF) was studied in anaerobic batch systems, both under well-mixed and poorly-mixed conditions. In well-mixed conditions, partitioning of 2-CN between solid and aqueous phases was fast, resulting in rapid attainment of equilibrium. Equilibrium partitioning could be described by a Freundlich isotherm, C(s)=K x [C(a)](m), where C(s) (micromoles g(-1) iron) and C(a) (micromoles L(-1)) were the solid and aqueous phase 2-CN concentrations, respectively. Isotherm parameters, m and K were determined to be 0.76 and 5.6 x 10(-2) (micromole g(-1) iron)/(micromole L(-1)), respectively. Sorption (k(2)) and desorption (k(3)) rate constants were determined to be 5.60 x 10(-1) h(-1) g(-1) iron L and 10 h(-1), respectively. Reductive dehalogenation of aqueous phase 2-CN occurred concurrently but at a slower rate, and could be described by the expression (dC(T)//dt)= -k(1) x M x (C(a))(N), where C(T) (micromoles L(-1)) was the total 2-CN concentration and M (g iron L(-1)) the concentration of HCIF. The values of k(1) and N were determined to be 1.09 x 10(-2) h(-1) g(-1) iron L and 1.647, respectively. In poorly mixed conditions, adsorption (k(2)) and desorption (k(3)) rate constants were 3.92 x 10(-5) h(-1) g(-1) iron L and 7 x 10(-4) h(-1), respectively, i.e., several orders of magnitude less than in well-mixed systems. The dehalogenation rate parameters, k(1) and N were determined to be 2.22 x 10(-4) h(-1) g(-1) iron L and 0.986, respectively, suggesting slower dehalogenation. These results highlight how mass-transfer limitations during the interaction between HCIF and 2-CN in poorly mixed systems, such as permeable reactive barriers (PRBs), can potentially impact the dehalogenation process.     

Validation of capillary electrophoresis in the analysis of ewe's milk casein

Recent investigations have shown that capillary electrophoresis (CE) can be an alternative to other techniques such as polyacrylamide gel electrophoresis (PAGE) or sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) in the qualitative analysis and separation of the different casein fractions in cow's and ewe's milk. However, past work has not yet clarified whether that method can achieve good quantifications. The present study has used a commercial whole ovine casein standard and a mixture of the standard and whole casein extracted from ewe's milk cheese to test the reliability of the technique. The results show that CE was able to quantify the ewe's milk caseins. The areas under four of the most representative peaks on the electrophoretogram for two alpha and two beta-caseins (designated alpha-casein1CE, alpha-casein2CE, beta-casein1CE, and beta-casein2CE in order of elution) were used to validate the method. In relation to linearity, coefficient of determination (r2) values greater than 99% were obtained for the regressions of each of the caseins. Moreover, each casein yielded response factors with a relative standard deviation (R.S.D.) of less than or equal to 5. The coefficients obtained in the day-to-day reproducibility analysis were higher than those for the same-day repeatability, but all the values were within acceptable limits. In the study of accuracy, the percentage recovery rates for the alpha-casein fractions were higher than those for the beta-casein fractions, hence quantification of the latter using this technique would appear to be more accurate under the conditions employed.     

反相高效液相色谱法测定牛奶中的主要蛋白质

建立了测定牛奶中的主要蛋白质的反相高效液相色谱法,对前处理方法进行了优化,采用Agilent Zorbax 300SB-C8(250 mm×4.6 mm,5 μm)色谱柱,三氟乙酸-水-乙腈流动相梯度洗脱,214 nm检测,柱温45 ℃,外标法定量.测定κ-CN, αs2-CN, αs1-CN, β-CN, Whey和Igg的线性关系良好,相关系数均大于0 999,加标回收率在74.8%～132.5%之间.大豆蛋白质不影响分离与检测.采用本方法分析了9种牛奶样品中上述蛋白质的含量与总量,结果表明,本方法测定结果准确可靠.不同样品中4种酪蛋白与乳清蛋白的比例基本接近,但是不同品牌之间存在一定差异.     

Analysis of benzalkonium chloride by capillary electrophoresis-tandem mass spectrometry

Conditions for the separation and determination of benzalkonium chloride (BAC) homologues by CE with UV-detection and CE coupled to MS (IT) using electrospray as ionization source were established. The separation was performed using fused-silica capillaries of 50 microm id and 100 mM acetic acid-ammonium acetate buffer solution at pH 4.5 with 80% of ACN as carrier electrolyte. CE-MS coupling parameters were optimized and methanol-10 mM acetic acid (90:10 v/v) was selected as sheath liquid. Detection limits, based on an S/N of 3:1, were calculated, and values between 0.8 and 1.3 mg/L with CE-ESI/MS and around 0.5 mg/L with CE-ESI-MS/MS, using hydrodynamic injection (15 s, 3.5 kPa), were obtained. Good run-to-run and day-to-day precisions on concentration were achieved with RSDs lower than 8%. Quantitative analysis was carried out by the internal standard method and the calibration curves showed good linearities (r(2) > 0.98). The CE-ESI-MS/MS method was successfully applied to the analysis of BAC in different ophthalmic solutions, allowing the direct determination, identification and confirmation of the BAC homologues presented in these samples.     

Trace determination of short-chain aliphatic amines in biological samples by micellar electrokinetic capillary chromatography with laser-induced fluorescence detection

In this study, a new capillary electrophoresis (CE) method is described originally for the sensitive and selective determination of short-chain aliphatic amines in biological samples. These amines were converted into their N-hydroxysuccinimidyl fluorescein-O-acetate (SIFA) derivatives and measured by micellar electrokinetic capillary chromatography with laser-induced fluorescence detection. The derivatization conditions and separation parameters for the aliphatic amines were optimized in detail. The SIFA-labeled amines were fully separated within 8.5 min using 25 mM pH 9.6 boric acid electrolyte containing 60 mM sodium dodecyl sulfate (SDS). The parameters of validation such as linearity of response, precision and detection limits were determined. The detection limits were obtained in the range from 0.02 to 0.1 nM, which was the lowest value reported by CE methods. The developed method was successfully employed to monitor aliphatic amines in serum and cells samples. After comparison of other CE methods using different fluorescent probes, the present method represents a powerful tool for the trace determination of aliphatic amines in complex biological samples.     

Trace-level determination of 3'-azido-3'-deoxythymidine in human plasma by preconcentration on a silver (I)-thiol stationary phase with on-line reversed-phase high-performance liquid chromatography

A method was developed for the determination of 3'-azido-3'-deoxythymidine (AZT) in plasma. The method is based on the trace enrichment of AZT on a pre-column packed with a silver-loaded thiol stationary phase at pH 11.6. On-line desorption to the reversed-phase liquid chromatographic system is performed by injecting a plug of 50 microliters of 1 M perchloric acid on the silver (I)-thiol pre-column. Two different sample pretreatment methods - protein precipitation with perchloric acid and on-line clean-up via a polymeric PRP-1 pre-column - were applied for the determination of AZT in human plasma. The latter method allows the direct injection of plasma samples into the analytical system and can therefore easily be automated. With both methods detection limits in the order of 10(-8) M AZT were obtained after preconcentration of 1.0 ml of plasma, using UV detection at 267 nm.