高效液相色谱法测定烟草料液中的糖

研究了用蒸发光散射检测器检测，高效液相色谱法测定烟草料液中糖的方法。料液中的糖用固相萃取预分离，然后以Waters carbohydrate高效糖柱为固定相，V（乙腈）：V（水）=70：30作为流动相分离，蒸发光散射检测器检测；样品中鼠李糖、木糖、阿拉伯糖、果糖、甘露糖、葡萄糖、蔗糖、麦芽糖8种糖的加标回收率分别为：97．0％、95．6％、102％、102．1％、95．0％、101．8％、102．6％、97．8％；线性范围分别为：鼠李糖、果糖、葡萄糖、蔗糖0．1～20pg，木糖、阿拉伯糖、甘露糖、麦芽糖0．2～25μg。相对标准偏差均小于3．2％。方法的检出限达：鼠李糖20ng、木糖26ng、阿拉伯糖28ng、果糖14ng、甘露糖20ng、葡萄糖10ng、蔗糖12ng、麦芽糖15ng，用该方法测定了烟草料液中的糖。     

A direct method for the separation and quantification of bile acid acyl glycosides by high-performance liquid chromatography with an evaporative light scattering detector

A direct method for the separation and quantification of a series of bile acid acyl glycosides using high-performance liquid chromatography coupled to an evaporative light scattering detector (HPLC-ELSD) is described. Complete separation of each of 15 bile acid acyl 24-alpha-glucosides and their 24-beta-anomers and 24-beta-galactosides was achieved by the stepwise gradient elution mode on a C18 column using a mixture of acetonitrile-methanol (8:2, v/v) and 1% aqueous acetic acid as the mobile phase. 24-beta-Galactosides were always eluted faster than the corresponding 24-beta-glucosides, which eluted after the corresponding 24-alpha-anomers. Calibration curves of different 24-beta-galactosides were linear over a range of 0.2-40 nmol of injected amount and the detection limits (S/N > 3) were from 0.08 to 0.1 nmol. The present HPLC-ELSD method may provide an insight into the separation and quantification of the biologically interesting neutral bile acids.     

New evaporative light scattering detector for high temperature gel permeation chromatography

A new evaporative light scattering detector (ELSD) for the analysis of polyolefins by high temperature gel permeation chromatography (GPC) was recently introduced by Agilent Technologies. For the first time, we investigated the possibility to use this detector to measure the molecular weight distributions (MWD) of different type of polyolefines (polypropylene, linear, and low-density polyethylene). These samples were previously characterized by GPC with a differential refractive index (DRI) detector by several companies, in an interlaboratory study conducted by International Union of Pure and Applied Chemistry.^[1 Luruli, N. 2010. PHASE 1: IUPAC SEC/GPC Round Robin Project Report: Repeatability and Reproducibility of Sample Preparation and Analysis in High-Temperature SEC, http://media.iupac.org/projects/2005/2005-011-3-400_rpt-phase1_110510.pdf [Google Scholar]^] The excellent baseline stability of ELSD as compared with DRI was reflected in a better reproducibility of the measured average molecular weights. More importantly, after applying required corrections to linearize the response of the ELSD as a function of concentration, we obtained similar results as previously obtained with DRI for the MWD of analyzed resins, covering typical applications of polyolefins.     

Linearization of evaporative light scattering detector signal

Recent advances in nebulizer technology of the evaporative light scattering detector (ELSD) allow the evaporation of trichlorobenzene (TCB) at much lower temperatures than the previous instruments, thus avoiding the sample loss in the lower molecular weight domain. Therefore, the new ELSD opens the possibility to correctly evaluate the molecular weight distribution (MWD) of polymers by gel permeation chromatography, after linearizing the ELSD signal intensity in function of concentration. To find the correct exponent parameter for linearization, it is necessary to take into account not only the peak area, but each point of the chromatogram. The evaluation method for this exponent parameter, found to be 1.61 for the analysis in TCB of polyolefin and polystyrene samples, is presented in this study. This value was verified by the excellent correlation found between the obtained MWD of a high-density polyethylene both with the ELSD and with the traditional differential refractive index detector.     

Direct analysis of artemisinin from Artemisia annua L. using high-performance liquid chromatography with evaporative light scattering detector, and gas chromatography with flame ionization detector

Since the isolation of artemisinin 32 years ago, it has been analyzed by different chromatographic techniques. This work compared the analysis of artemisinin from crude plant samples by GC with flame ionization detection (GC-FID) and HPLC with evaporative light scattering detector (HPLC-ELSD). Data is also presented indicating that GC is suitable for the quantification of two of artemisinin precursors (arteannuin B and artemisinic acid) if a mass spectrometer is available. GC-FID and HPLC-ELSD were chosen because of their low cost compared to other detection methods, their ease of operation compared to HPLC with electrochemical detection, and because neither require artemisinin derivatization. Both GC-FID and HPLC-ELSD provided sensitive (ng level) and reproducible results for the analysis of artemisinin from field plants, with a correlation coefficient of r(2)=0.86 between the two methods. Both methods could be easily adapted to the analysis of pharmaceutical-grade artemisinin.     

Characterisation of iota-carrageenans oligosaccharides with high-performance liquid chromatography coupled with evaporative light scattering detection

Enzymatically digested oligo-iota-carrageenans were separated with liquid chromatography, coupled to evaporative light scattering detection. As expected, compared to oligo-kappa-carrageenans, the additional sulphate group in the neocarrabiose unit of iota-carrageenans significantly modified the separation mechanisms on ion-exchange chromatography, porous graphitic carbon and ion-pair chromatography. The oligomers were then isolated and characterised off-line with electrospray ionisation mass spectrometry in positive-ion mode. The tetrasaccharide, hexasaccharide and octasaccharide that were identified were associated with protonated heptylamine molecules whose number depended on the number of sulphate groups.     

Fingerprint analysis of Dioscorea nipponica by high-performance liquid chromatography with evaporative light scattering detection

High-performance liquid chromatographic method (HPLC) with evaporative light scattering detection (ELSD) coupled with microwave-assisted extraction (MAE) as an efficient sample preparation technique has been developed for fingerprint analysis of Dioscorea nipponica. The samples were separated with an Agilent C8 column using water (A) and acetonitrile (B) under gradient conditions (0-10 min, linear gradient 20-40% B; 10-12 min, linear gradient 40-42% B; 12-25 min, isocratic 42% B) as the mobile phase at a flow rate of 1 mL min⁻¹ within 22 min. The ELSD conditions were optimized at nebulizer-gas flow rate 2.7 L min⁻¹ and drift tube temperature 90 °C. Precision experiments showed relative standard deviation (R.S.D.) of peak area and retention time were better than 2.5%; inter-day and intra-day variabilities showed that R.S.D. was ranged from 0.78% to 4.74%. Limit of detection was less than 50 μg mL⁻¹ and limit of quantification was less than 80 μg mL⁻¹. Accuracy validation showed that average recovery was between 97.39% and 104.07%. The method was validated to achieve the satisfactory precision and recovery. Relative retention time and relative peak area were used to identify the common peaks for fingerprint analysis. There are nine common peaks in the fingerprint. The quality of seven batches of D. nipponica samples was evaluated to be qualified or unqualified by the parameters “difference” and “total difference” of common peaks. Furthermore, the contents of important medicinal compounds (dioscin, prodioscin and gracillin) in different batches of D. nipponica samples were determined simultaneously using the developed HPLC-ELSD method. The results indicated variation of the herb quality which might be related to different producing area, growing condition, climate, harvest time, drug processing and so on. The developed analytical procedure was proved to be a reliable and rapid method for the quality control of D. nipponica.     

Separation and quantification of beer carbohydrates by high-performance liquid chromatography with evaporative light scattering detection

An HPLC method with an evaporative light scattering detector was optimized and validated for quantification of carbohydrates in beer. The chromatographic separation was achieved using a Spherisorb NH2, 5 microm chromatographic column and gradient elution with acetonitrile/water. The determinations were performed in the linear range of 0.05-5.0 g/L for fructose, 0.05-5.0 g/L for glucose, 0.05-15.0 g/L for maltose, 0.05-10.0 g/L for maltotriose, and 0.05-5.0 g/L for maltotetraose. The detection limits were 0.005 g/L for fructose, 0.008 g/L for glucose, and 0.01 g/L for maltose, maltotriose, and maltotetraose. The reliability of the method in terms of precision and accuracy was evaluated in three beer matrices, low alcohol beer, 6% alcohol beer, and beer made with part of adjuncts (4.5% alcohol). Relative standard deviations (RSDs) ranged between 1.59 and 5.95% (n = 10), and recoveries ranged between 94 and 98.4%.     

Interference of chitosan in glucose analysis by high-performance liquid chromatography with evaporative light scattering detection

The purpose of this work was to quantify glucose in aqueous solutions containing chitosan by high-performance liquid chromatography (HPLC) with evaporative light scattering detection (ELSD). Chitosan is a natural compound that is used alone or as an additive in several formulations. Microencapsulation of bioactive compounds such as glucose, by means of chitosan, is being explored, but difficulties arise when glucose needs to be determined in the presence of chitosan. HPLC is the technique most commonly used for glucose analysis, and ELSD may offer advantages (e.g. sensitivity and the possibility of operating in gradient mode) compared with other detectors. The influence of chitosan in the analysis of glucose by HPLC with ELSD was investigated at different pH values of the aqueous solutions. Isocratic elution with an acetonitrile/water mixture (80:20, v/v) and water washing between runs were the best options to avoid the mucoadhesive properties of chitosan, which are responsible for column degradation and variability of the retention time of glucose. The developed methodology was considered completely adequate for rapid glucose analysis in aqueous solutions with low pH (< 3), in the presence of chitosan.     

Fatty acids by high-performance liquid chromatography and evaporative light-scattering detector

A high-performance liquid chromatographic (HPLC) separation method with an evaporative light-scattering detector (ELSD) has been developed for the separation and quantitative analysis of fatty acid methyl esters (FAME) in three different oils. Reverse-phased C18 HPLC separation of 13 FAME is achieved using a methanol/water eluent mixture. The retention times (RT) reflect the elution behavior of these compounds on C18 reversed-phase HPLC. The proposed method is tested on: soybean oil (Glycine max L.) as reference sample, rice bran oil (Oryza sativa L.), pumpkin seed oil (Cucurbita pepo L.) and algal oil (Arthrospira platensis Nordst.).     

Determination of gentamicin sulfate and related compounds by high-performance liquid chromatography with evaporative light scattering detection

A rapid and simple method for the separation and quantitation of gentamicin sulfate by HPLC coupled with evaporative light scattering detection (ELSD) has been developed. Detection of the different components of gentamicin is problematic because of the lack of UV absorbing chromophore. The use of the universal ELSD avoids the need for sample derivatization or use of specific detector such as pulsed amperometry. Separation was performed on a highpurity C18 125 mm x 4 mm i.d., 3 microm, reversed phase column with 48.5 mM trifluoroacetic acid-methanol (97:3, v/v), as mobile phase at a flow rate of 0.7 ml/min. The influence of the gas nature, gas pressure and temperature of the drift tube of the detector on the detection response was investigated. Optimization was performed with the help of a specific experimental design software. This method allows the determination of the composition in components C1, C1a, C2, C2a and C2b of gentamicin sulfate samples. Mass spectrometry was employed to confirm the ELSD chromatographic profile. The method was validated using methodology described by the International Conference of Harmonization in the field of Medicinal Substances. Commercial samples of different sources were analyzed and results were in good agreement with specifications of both European and United States Pharmacopoeia.     

Analysis of neomycin sulfate and framycetin sulfate by high-performance liquid chromatography using evaporative light scattering detection

A rapid and simple method for the determination of main components and related substances of both neomycin sulfate and framycetin sulfate by HPLC and evaporative light scattering detection (ELSD) is described. The method was also used to determine the neomycin B and the sample sulfate content. Detection and quantitation of aminoglycoside antibiotics are problematic because of the lack of UV absorbing chromophore. The use of a universal detector avoids the need for sample derivatization or use of specific detector based on pulsed amperometry described to be difficult in routine assays. Separation was performed with a Polaris C18 150 mm x 4.6 mm i.d., 3 microm reversed-phase column with a solution of 170mM trifluoroacetic acid (TFA) mobile phase at a flow rate of 0.2 mL/min. The chromatographic parameters were optimized with the help of experimental design software. Mass spectrometry (MS) was employed to confirm the ELSD profile. The final method was validated using methodology described by the International Conference of Harmonization in the field of Active Pharmaceutical Ingredients. Commercial samples of different sources were analyzed and results were in good agreement with specifications of the European Pharmacopoeia.     

Analysis of silica nanoparticles by capillary electrophoresis coupled to an evaporative light scattering detector

A simple and rapid methodology has been developed to identify and separate silica nanoparticles (SiO₂NPs) of different sizes in aqueous solution by capillary zone electrophoresis coupled to an evaporative light scattering detector (CE-ELSD). SiO₂NPs were separated using 3 mM ammonium acetate buffer, containing 1% methanol at pH 6.9. SiO₂NPs of 20, 50 and 100 nm were successfully separated under the optimum experimental conditions. CE coupled to ELSD has been proven to be an effective separation technique to determine particles with such small sizes, although the peaks are very close to each other, and it is a promising technique that may allow the separation of other types of nanoparticles. Confirmation by TEM and quantification of the SiO₂ content was also carried out by inductively coupled plasma-mass spectrometry (ICP-MS). The new method was applied to the analysis of real samples, in order to assess its ability to avoid matrix effects in the determination of SiO₂NPs in these kinds of samples.     

Evaluation of the coupling between ultra performance liquid chromatography and evaporative light scattering detector for selected phytochemical applications

Fast analysis in LC can be performed with sub-2 microm particles at very high pressures (up to 1000 bar) known as ultra performance LC (UPLC). With this configuration, it is possible to obtain fast and/or highly efficient separations compared to conventional LC. For the analysis of compounds without chromophores, the evaporative light scattering detector (ELSD) is an attractive alternative because of its quasi-universality, versatility, low-cost and good sensitivity. The UPLC-ELSD was investigated in terms of sensitivity and apparent efficiency, with a conventional ELSD instrument, for two types of commercially available nebulisers, using different mobile phase flow rates and column ids. Results were finally compared with the UPLC-UV configuration. Three applications with phytochemical compounds were selected to highlight the potential of this approach (i.e. the isocratic separations of artemisinin and its derivatives, of calystegines and the gradient separation of several tropane alkaloids). Depending on the used column length, baseline separations were obtained in 3-10 min, with an average apparent efficiency ranging from 7000 to 30,000 plates.     

Determination of polysorbate 80 in parenteral formulations by high-performance liquid chromatography and evaporative light scattering detection

Drugs that are not very soluble in aqueous formulations are solubilized with surfactants such as polysorbate 80. In order to evaluate the stability of excipient such as polysorbate 80 in drug formulation, a rapid chromatographic methodology is desired; however, polysorbate 80 does not have a strong chromophore for monitoring by absorption spectrometry. A simple and fast method for the analysis of polysorbate 80 in pharmaceutical formulations was developed using high-performance liquid chromatography with evaporative light scattering detection (ELSD). Separation of polysorbate 80 as a single peak was achieved on a C18 column using a methanol/water gradient mobile phase and ELS detection. The method is specific for polysorbate 80 in the formulation as there were no interferences from the drug or other excipients. Precision, recovery, linearity and limit of quantitation/detection experiments gave acceptable results during the evaluation of the method.     

Characterization of spirostanol saponins in Solanum torvum by high-performance liquid chromatography/evaporative light scattering detector/electrospray ionization with multi-stage tandem mass spectrometry

High-performance liquid chromatography with an evaporative light scattering detector and electrospray ionization multistage tandem mass spectrometry (HPLC/ELSD/ESI-MS(n)) was used to identify spirostanol saponins in a saponin extract of Solanum torvum. The fragmentation behavior of saponins was studied using ESI-MS(1-3) in positive ion mode. The MS(n) spectra of the [M+H](+) ions provide structural information including aglycone type and the nature and sequence of sugars. The use of ELSD allowed the profiling of the nonchromophore-containing saponins in this plant. The MS analysis established in this study with known saponins was successfully applied to tentatively identify two new siprostanol glycosides, neosolaspigenin 6-O-beta-D-quinovopyranoside and solagenin 6-O-[beta-D-xylopyranosyl-(1 --> 3)-O-beta-D-quinovopyranoside].     

Polyolefin characterization in dibutoxymethane by high temperature gel permeation chromatography with a new evaporative light scattering detector

A new evaporative light scattering detector (ELSD) for the analysis of polyolefins by high temperature gel permeation chromatography (GPC) was recently introduced by Agilent Technologies. For the first time, we investigated the possibility to use this detector to measure the molecular weight distributions (MWD) of different types of polyolefins (polypropylene, linear and low-density polyethylene) in dibutoxymethane (DBM, butylal). These samples were previously characterized by GPC in trichlorobenzene (TCB) with a differential refractive index (DRI) detector in an interlaboratory study conducted by the International Union of Pure and Applied Chemistry (IUPAC) [1], and in a recent publication by GPC with the new ELSD in TCB [2]. The signal to noise of ELSD using DBM is about 10 times lower than that for TCB. However, the ELSD signal power exponent for DBM was measured as 1.35, which is much closer to unity than the value of 1.61 for TCB. After applying the required corrections to linearize the response of the ELSD signal as a function of concentration, similar average molecular weights to those measured in the interlaboratory study using DRI, were obtained for the analyzed resins.     

Calibration of an evaporative light-scattering detector as a mass detector for supercritical fluid chromatography by using uniform Poly(ethylene glycol) oligomers

The quantitativeness of an evaporative light-scattering detector (ELSD) for supercritical fluid chromatography (SFC) was evaluated by using an equimass mixture of uniform poly(ethylene glycol) (PEG) oligomers. Uniform oligomers, in which all molecules have an identical molecular mass, are useful for the accurate calibration of detectors. We calibrated the SFC-ELSD system for various concentrations and molecular masses by using an equimass mixture of PEG oligomers. ELSD not only showed a good linear response to the injected concentration over a wide concentration range, from 10(-4) to 10(-1)g/mL, but also showed a strong dependence on the molecular mass of the solute. By using chromatograms of the equimass mixture of uniform oligomers to calibrate SFC-ELSD, it was possible to determine exact values of not only the average mass but also the molecular-mass distribution for a PEG 1540 sample. The average molecular mass was shifted to a higher value by several percentage points after calibration of the ELSD.     

Efficient method for (lyso)phospholipid class separation by high-performance liquid chromatography using an evaporative light-scattering detector

A simple high-performance liquid chromatography method with evaporative light-scattering detection has been devised in order to separate and quantify the major phospholipid and lysophospholipid classes. HPLC analyses were performed with a diol-silica column and ternary gradient elution. Standard curves were drawn up for each of the (lyso)phospholipids involved.