海藻酸酮膜表面的配位结构及催化MMA聚合的性能

将海藻酸钠(SA)与CuCl2.2H2反应得到一种配位聚合物海藻酸酮(Cu-An)。以ESR、电导率、IR和SPS方法对此配位聚合物进行表征,确定了组成与结构：同时研究了甲基丙烯酸甲酯(MMA)在该配位聚合物膜、HSO3^-和水体系催化引发作用下的聚合反应历程。结果表明,配位聚合物的中心离子Cu^2^+与两个海藻酸(An)链节单元上的两个羧羟基氧原子和两个离解氢原子的羧羟基氧原子以共价型配位,配位数为4.MMA在上述的催化引发体系中是按照自由基加聚反应历程进行聚合的,PMMA呈无规结构。Cu-An在催化引发体系中起着催化剂的配位催化作用。     

苯磺酰苯丙氨酸构筑的一维链状钙(Ⅱ)配位聚合物的合成、结构表征和 抗肿瘤活性的研究

在95%乙醇溶剂中, 通过高氯酸钙、苯磺酰苯丙氨酸和NaOH反应, 合成了一个新型的一维链状钙配位聚合物。对其进行了元素分析和红外光谱分析表征, 并用X-射线单晶衍射测定了它的单晶结构。结果表明:在配合物分子中, 每个钙原子分别与配体中羧酸根的4个氧原子、配位水中的2个氧原子以及配位乙醇分子中的1个氧原子配位, 形成了畸变的五角双锥构型。配合物分子通过羧酸根的桥联作用形成了一维链状配位聚合物结构。初步研究了配合物对肝癌、肺腺癌、白血病和结肠癌的抗肿瘤活性。     

苯磺酰苯丙氨酸构筑的一维链状钙(Ⅱ)配位聚合物的合成、结构表征和抗肿瘤活性

在95%乙醇溶剂中,通过高氯酸钙、苯磺酰苯丙氨酸和NaOH反应,合成了一个新型的一维链状钙配位聚合物。对其进行了元素分析和红外光谱分析表征,并用X-射线单晶衍射测定了它的单晶结构。结果表明:在配合物分子中,每个钙原子分别与配体中羧酸根的4个氧原子、配位水中的2个氧原子以及配位乙醇分子中的1个氧原子配位,形成了畸变的五角双锥构型。配合物分子通过羧酸根的桥联作用形成了一维链状配位聚合物结构。初步研究了配合物对肝癌、肺腺癌、白血病和结肠癌的抗肿瘤活性。     

聚(苯乙烯-丙烯酸)-氯化铜配合物催化引发丙烯腈聚合的研究

将聚(苯乙烯-丙烯酸)(PSAA)(Mw=3500)与氯化铜在异丙醇溶液中反应得到一种配位聚合物膜聚(苯乙烯-丙烯酸)-氯化铜(PSAA-Cu(Ⅱ)).研究丙烯腈(AN)在该配位聚合物膜、HSO3-和水体系(温度为55℃)催化引发作用下的聚合反应历程.AN在上述的催化引发体系中是按照自由基加聚反应历程进行聚合的,PSAA-Cu(Ⅱ)在催化引发体系中起着催化剂的配位催化作用.讨论了温度、Na2SO3浓度、AN浓度和PSAA-Cu(Ⅱ)膜用量对聚合速率、诱导时间的影响.实验结果表明,配合物PSAA-Cu(Ⅱ)膜催化引发AN聚合的诱导期为128s,反应24h后PAN产率为75.6%,Mw=2.18×104和Mn=1.12×104,多分散性系数为1.95.     

Nd(O-i-Pr)3-Al(i-Bu)3配位催化甲基丙烯酸甲酯聚合反应的研究

甲基丙烯酸甲酯(MMA)能以自由基引发聚合,也能以格氏试剂、烷基锂或烷基铝引发阴离子聚合[1].六十年代来,ABE等人研究了Ti、V、Cr、Co、Mn等的Ziegler-Natta催化剂的催化聚合反应,提高聚合物的规整性[2].近年来出现了稀土配位催化聚合MMA及其它丙烯酸酯的报道[2～7],但较少有Nd(O-i-Pr)3配位催化MMA聚合的报道.     

褐藻酸铜配合物膜催化VAc自由基聚合

以褐藻酸钠膜浸渍在15%CuCl2*2H2O水溶液中48 h的方法,于室温制备了疏水性的褐藻酸铜(Ⅱ)配位聚合物膜,并通过ESR、 UV-Vis、 IR、 XPS和电导率等手段,研究此配位催化剂褐藻酸铜(Ⅱ)配位聚合物膜表面的组成、配位结构和性质,得知1个Cu2+ 是以dsp2杂化空轨道与褐藻酸2个链节单元的2个羧羟基氧及其2个脱质子带负电荷氧的孤对电子发生配位作用,形成低自旋构型的褐藻酸铜(Ⅱ)配位聚合物,中心Cu2+ 的配位数为4,这对于低分子配合物而言,其空间构型一般是正方形,但在褐藻酸铜(Ⅱ)配位聚合物中,由于褐藻酸分子链的缠绕和卷曲,使上述的空间构型被扭曲,甚至有些配位体没有到位,导致该配位聚合物的中心Cu2+ 存在一些空位中心而具有配位催化活性,因此,HSO3-能按配位催化机理产生初级自由基氢,使醋酸乙烯酯(VAc)按自由基加聚反应历程进行聚合,这有别于CuCl2-Na2SO3-H2O氧化还原引发聚合体系。测定VAc在本体系和室温、pH=7条件下聚合的诱导期为90 s,反应时间24 h。聚醋酸乙烯酯(PVAc)得率82%, mw=1.02×106, mn=2.27×105, mw/mn=4.49。     

基于4H-1,2,4-三氮唑-4-乙酸配体的两个新的过渡金属配位聚合物的合成、结构与性质(英文)

用水热方法合成了两个新的配位聚合物[Co(trza)](1)和[Ni(trza)(H2O)2](2)(Htrza=4H-1,2,4-三氮唑-4-乙酸).单晶X-射线衍射结构分析表明:化合物1和2具有二维(2D)层状结构.在1中,Co(II)离子采用六配位方式,分别与来自两个不同配体(trza)上的两个氮原子和四个羧基氧原子配位,形成八面体配位聚合物,每个羧基以二齿桥联方式连接两个Co原子,形成1D链,这些一维链进一步与唑环上的N原子形成2D层状结构.在2中,中心Ni(II)离子采用同样的配位模式形成八面体配位聚合物,与1不同的是:来自两个配体阴离子(trza)上的两个羧基氧原子分别被两个配位水分子所取代,且配体上的羧基氧原子采用的是单齿配位模式.化合物1的变温磁化率测定表明了金属间弱的反铁磁相互作用.此外,两个配位聚合物的IR光谱、热稳定性以及化合物1的磁性质也被测定.     

2-[(2,4-二氯苯胺基)羰基]苯甲酸与过渡金属配合物的研究

本文报道了2-[2,4-二氯苯胺基)羰基]苯甲酸与5种过渡金属配合物的制备和表征,证实配合物是通过羧酸根上羟基氧原子和酰按羰基上氧原子配位成键,除Cu(Ⅱ)配合物分子为平面正方形结构外,其余均为八面体结构,只是扭曲程度不同。     

1，2-环己二羧酸及芳香含氮配体的双核镉、锰配合物的合成和晶体结构

用水热法合成了两种新的配合物[Cd2(e,e-trans-chdc)2(bipy)2(H2O)2].H2O(1)和[Mn2(e,a-cis-chdc)2(phen)2(H2O)2].2H2O(2)(chdc=1,2-环己二羧酸,bipy=2,2′-联吡啶和phen=1,10-邻菲咯啉),用X-射线单晶衍射分析确定了配合物的晶体结构。配合物1和2均为双核分子。配合物1中,2个镉髤离子由2个1,2-环己二羧酸根以e,e-trans配位方式桥联,每个镉髤离子与1个2,2′-联吡啶的2个氮原子、2个1,2-环己二羧酸根的4个氧原子及1个水分子中的氧原子配位,形成了单帽变形三棱柱构型。配合物2中,2个锰髤离子由2个1,2-环己二羧酸根以e,a-cis配位方式桥联,每个锰髤离子与1个1,10-邻菲咯啉的2个氮原子、2个1,2-环己二羧酸根的3个氧原子及1个水分子中的氧原子配位,形成了畸变的八面体构型。配合物1和2分子之间都存在π-π堆积和O-H…O、C-H…O弱作用,进而将双核分子连接成三维超分子网络结构。配合物的荧光均来自于配体的荧光。     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——三层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型具有梯度极性的多羟基多臂星状聚合物刷 .端羟基超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 )与 2 溴 异丁基酰溴反应制得大分子引发剂 (HP Br) ,以Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)为催化体系 ,进行甲基丙烯酸甲酯 (MMA)的ATRP反应 ,得到以甲基丙烯酸甲酯为臂的多臂星状超支化聚合物 (HP g PMMA) .又以HP g PMMA为引发剂 ,进行甲基丙烯酸羟乙酯 (HEMA)的ATRP聚合 ,得到核壳型具有梯度极性的多羟基多臂星状超支化聚合物 (HP g PMMA b PHEMA) ,继续将其羟基官能团溴代化 (与 2 溴 异丁基酰溴反应 ) ,引发HEMA的ATRP溶液聚合 ,得到了多臂星状超支化聚合物刷 .产物的结构用1 H NMR、FTIR、GPC等进行了表征和测试 .     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.