Magnetotransport in thin epitaxial Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript> films

The magnetoconductivity of thin Bi₂Se₃ films covered by a protective Se layer and grown at (111) BaF₂ substrates is studied. It is shown that the negative magnetoconductivity observed at low magnetic fields and caused by the effect of weak antilocalization, as well as the Shubnikov?de Haas oscillations at higher fields, is determined only by the magnetic field component perpendicular to the film plane. The obtained experimental results can be reasonably interpreted under the assumption that the studied films exhibit two-dimensional topologically protected electron states. Moreover, the contribution of these states to the total conductivity turns out to be the dominant one.     

Effect of thermal treatment on the thermoelectric properties of Sb<Subscript>0.9</Subscript>Bi<Subscript>1.1</Subscript>Te<Subscript>2.9</Subscript>Se<Subscript>0.1</Subscript> solid solution thin films

The effect thermal treatment in a vacuum has on the thermoelectric properties of Sb_0.9Bi_1.1Te_2.9Se_0.1 solid solution thin films obtained via ion-beam sputtering in an argon atmosphere is considered. It is established that the specific resistance and thermopower are determined by the type and concentration of intrinsic point defects of the Sb_0.9Bi_1.1Te_2.9Se_0.1 solid solution. The power factor values are found to be comparable to those of nanostructured materials based on (Bi,Sb)₂(Te,Se)₃ solid solutions.     

Quantum corrections to the conductivity and anisotropy of the magnetoresistance in Eu-doped Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript> thin films

We investigate the vibrational dynamics of a quantum mechanical resonator when an ensemble of laser pumped two-level emitters are fixed on it. Beyond the rotating wave approximation with respect to phonon’s variables, one can obtain an interesting phonon quantum dynamics if the quantum emitter’s variables are faster than those describing the mechanical resonator. Particularly, for certain parameters, one can obtain an enhanced phonon emission as well as larger phonon–phonon correlations in the steady state.     

Thermal sensors based on Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript> and (Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript>)<Subscript>70</Subscript>(Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript>)<Subscript>30</Subscript> thin films

Thin films of Sb₂Te₃ and (Sb₂Te₃)₇₀(Bi₂Te₃)₃₀ alloy and have been deposited on precleaned glass substrate by thermal evaporation technique in a vacuum of 2?×?10^?6 Torr. The structural study was carried out by X-ray diffractometer, which shows that the films are polycrystalline in nature. The grain size, microstrain and dislocation density were determined. The Seebeck coefficient was determined as the ratio of the potential difference across the films to the temperature difference. The power factor for the (Sb₂Te₃)₇₀ (Bi₂Te₃)₃₀ and (Sb₂Te₃) is found to be 19.602 and 1.066 of the film of thickness 1,500 Å, respectively. The Van der-Pauw technique was used to measure the Hall coefficient at room temperature. The carrier concentration was calculated and the results were discussed.     

Structural and thermoelectric properties in (Sb<Subscript>1-x</Subscript>Bi<Subscript>x</Subscript>)<Subscript>2</Subscript>Te<Subscript>3</Subscript> thin films

We have investigated the structural and thermoelectric properties of (Sb_1-xBi_x)₂Te₃ thin films on CdTe(111)B. Analysis of X-ray diffraction patterns (–2 scans and rocking curves) of the films shows that they are of high quality and that they are well aligned with their (00.1) axis normal to the substrates. Measurements of the temperature-dependent thermoelectric power, resistivity, and Hall coefficient of the films were performed with respect to the binary composition, x. For the samples in the range 0.2<x<0.3, the room-temperature thermopower values were in the range 159–184 V/K, the room-temperature carrier concentrations were 3.93–5.13×10¹⁹ cm^-3, and the room-temperature mobilities were 24.6–64.0 cm²V^-1s^-1. PACS 72.20.Pa; 72.80.Jc; 73.6l.Le     

Optical functions of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript>-Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript> solid solutions in the range of plasmon excitation and interband transitions

The most narrow sub-Doppler frequency resonances in the linear absorption of monochromatic radiation that propagates in the normal direction through a cell containing a layer of rarefied gas medium with a thickness smaller than or on the order of the wavelength of this radiation are theoretically studied. The calculation is performed using as an example a three-dimensional gas cell shaped like a rectangular parallelepiped. It is shown that the width and amplitude of considered sub-Doppler resonances (in the vicinity of centers of rather weak quantum transitions) significantly depend on the transit relaxation of atomic particles, which is determined by their transit times through the irradiated region of the cell both in longitudinal and in transverse directions. The restrictions of the approximation of the planar one-dimensional cell that was previously used in such calculations are determined. Possible applications of linear absorption resonances in ultrathin (nanometer) gas cells as references for optical frequency standards are discussed.     

Effect of heat treatment on the structure and the thermoelectric properties of Sb<Subscript>0.9</Subscript>Bi<Subscript>1.1</Subscript>Te<Subscript>2.9</Subscript>Se<Subscript>0.1</Subscript> thin films and composites based on them

This work considers the effect of vacuum annealing on the thermoelectric properties of Sb_0.9Bi_1.1Te_2.9Se_0.1 thin film and Sb_0.9Bi_1.1Te_2.9Se_0.1–C composites with various carbon contents produced by ion-beam deposition in an argon atmosphere. The electrical resistivity and the thermopower of Sb_0.9Bi_1.1Te_2.9Se_0.1–C nanocomposites are found to be dependent on not only the carbon concentration but also the type and the concentration of intrinsic point defects of the Sb_0.9Bi_1.1Te_2.9Se_0.1 solid solution, which determine the type of conductivity of Sb_0.9Bi_1.1Te_2.9Se_0.1 granules. The power factors are estimated for films of Sb_0.9Bi_1.1Te_2.9Se_0.1 solid solution and films of Sb_0.9Bi_1.1Te_2.9Se_0.1–C composites and found to have values comparable with the values for nanostructured materials on the basis of (Bi,Sb)₂(Te,Se)₃ solid solutions.     

Energy spectrum of holes in Sb<Subscript>2</Subscript>Te<Subscript>2.9</Subscript>Se<Subscript>0.1</Subscript> solid solution according to the data on the transfer phenomena

The temperature dependence of the Hall coefficient of a single crystal of the p-Sb₂Te_2.9Se_0.1 solid solution grown by the Czochralski technique is studied in the temperature range 77–450 K. The data on the Hall coefficient of the p-Sb₂Te_2.9Se_0.1 are analyzed in combination with the data on the Seebeck and Nernst–Ettingshausen effects and the electrical conductivity with allowance for interband scattering. From an analysis of the temperature dependences of the four kinetic coefficients, it follows that, at T < 200 K, the experimental data are qualitatively and quantitatively described in terms of the one-band model. At higher temperatures, a complex structure of the valence band and the participation of the second-kind additional carriers (heavy holes) in the kinetic phenomena should be taken into account. It is shown that the calculations of the temperature dependences of the Seebeck and Hall coefficients performed in the two-band model agree with the experimental data with inclusion of the interband scattering when using the following parameters: effective masses of the density of states of light holes m_d1^*≈ 0.5m₀ (m₀ is the free electron mass) and heavy holes m_d2^*≈ 1.4m₀, the energy gap between the main and the additional extremes of the valence band ΔE_v ≈ 0.14 eV that is weakly dependent on temperature.     

Features of the electronic spectrum and optical absorption of ultrathin Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript> films

The electronic spectra and relative permittivity of ultrathin (1–3 QL) films of Bi₂Se₃ topological insulator have been calculated by the density functional theory. The calculated spectra exhibit a characteristic feature: the range of 0.0–0.9 eV below the Fermi level contains two doubly degenerate valence bands (“U-bands”), which are geometrically congruent to low-lying spectral branches in the conduction band. It has been shown that the saturation of optical absorption can result in a significant rearrangement of the electronic structure and properties in the near infrared spectral range in the considered film. In particular, the semiconductor (in the absence of interaction with light) type of conductivity of the film can be changed to the metallic type of conductivity strongly nonlinear in the intensity of light.     

Role of Ge incorporation in the physical and dielectric properties of Se<Subscript>75</Subscript>Te<Subscript>25</Subscript> and Se<Subscript>85</Subscript>Te<Subscript>15</Subscript> glassy alloys

The effect of Ge additive on the physical and dielectric properties of Se₇₅Te₂₅ and Se₈₅Te₁₅ glassy alloys has been investigated. It is inferred that on adding Ge, the physical properties i.e., average coordination number, average number of constraints and average heat of atomization increase but lone pair electrons, fraction of floppy modes, electronegativity, degree of crosslinking and deviation of stoichiometry (R) decrease. The effect of Ge doping on the dielectric properties of the bulk Se₇₅Te₂₅ and Se₈₅Te₁₅ glassy alloys has also been studied in the temperature range 300–350 K for different frequencies (1 kHz–5 MHz). It is found that, with doping, the dielectric constant ε^′ and dielectric loss ε^″ increase with increase in temperature and decrease with increase in frequency. The role of the third element Ge, as an impurity in the two pure binary Se₇₅Te₂₅ and Se₈₅Te₁₅ glassy alloys has been discussed in terms of the nature of covalent bonding and electronegativity difference between the elements used in making the aforesaid glassy systems.     

Specific features of the electronic,spin, and atomic structures of a topological insulator Bi<Subscript>2</Subscript>Te<Subscript>2.4</Subscript>Se<Subscript>0.6</Subscript>

The specific features of the electronic and spin structures of a triple topological insulator Bi₂Te_2.4Se_0.6, which is characterized by high-efficiency thermoelectric properties, have been studied with the use of angular- and spin-resolved photoelectron spectroscopy and compared with theoretical calculations in the framework of the density functional theory. It has been shown that the Fermi level for Bi₂Te_2.4Se_0.6 falls outside the band gap and traverses the topological surface state (the Dirac cone). Theoretical calculations of the electronic structure of the surface have demonstrated that the character of distribution of Se atoms on the Te–Se sublattice practically does not influence the dispersion of the surface topological electronic state. The spin structure of this state is characterized by helical spin polarization. Analysis of the Bi₂Te_2.4Se_0.6 surface by scanning tunnel microscopy has revealed atomic smoothness of the surface of a sample cleaved in an ultrahigh vacuum, with a lattice constant of ~4.23 Å. Stability of the Dirac cone of the Bi₂Te_2.4Se_0.6 compound to deposition of a Pt monolayer on the surface is shown.     

Magnetic Resonance Study of the Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> Doped with Manganese

Crystals of 3D topological insulators, bismuth telluride Bi₂Te₃, doped with manganese were studied using electron spin resonance (ESR) spectroscopy together with the SQUID magnetometry, transport measurements, and X-ray characterization. The obtained ESR data, such as the temperature and the angular dependence of the resonance field, reveal the specific critical behavior and confirm the ferromagnetic ordering of Mn spins even at modest doping. In addition to the studies of the critical behavior of diluted ferromagnet Bi_2?x Mn _x Te_3, we also discuss the effects of the limited solubility of Mn ions giving rise to microscopic inclusions of the spurious magnetic phases which were revealed using ESR technique.     

Impact of Ultrathin Pb Films on the Topological Surface and Quantum-Well States of Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript> and Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript> Topological Insulators

The effect of an ultrathin Pb film deposited on the surface of Bi₂Se₃ and Sb₂Te₃ compounds on the electronic state structure of topological insulators is studied experimentally by the angle-resolved photoemission spectroscopy (ARPES) technique. The following features are revealed: formation of two-dimensional quantum-well states in the near-surface region, an increase in the binding energy of the Dirac cone and the core levels, and a simultaneous electronic states intensity redistribution in the system in photoemission spectra. The results obtained show that topological states may coexist at the interface between studied materials and a superconductor, which seems to be promising for application in quantum computers.     

Ab initio study of 2DEG at the surface of topological insulator Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript>

By means of ab initio DFT calculation, we analyze the mechanism that drives the formation and evolution of the 2D electron gas (2DEG) states at the surface of Bi₂Te₃ topological insulator (TI). As it has been proved earlier it is due to an expansion of the van der Waals (vdW) spacing produced by intercalation of adsorbates. We will show that the effect of this expansion, in this particular surface, leads to several intriguing phenomena. On one hand we observe a different dispersion of the Dirac cone with respect to the ideal surface and the formation of Parabolic Bands (PB) below the conduction band and M-shaped bands in the valence band, the latters have been observed recently in photoemission experiments. On the other hand the expansion of the vdW gaps changes the symmetry of the orbitals forming the Dirac cone and therefore producing modifications in the local spin texture. The localization of these new 2DEG-states and the relocalization of the Dirac cone will be studied as well.     

NMR study of topological insulator Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> in a wide temperature range

NMR studies of ¹²⁵Te in the topological insulator bismuth telluride Bi₂Te₃ in a wide temperature range from room temperature to 12.5 K are performed. The pulsed NMR spectrometer Bruker Avance 400 is applied. The NMR spectra are obtained for the powder from Bi2Te3 single crystal and monocrystalline plates with the orientations c || B and c ⊥ B. At room temperature, the spectra consist of two lines related to two nonequivalent positions of tellurium nuclei Te1 and Te2. The parameters of the NMR frequency shift tensor are found from the powder spectrum. The temperature dependences of the spectra for the powder and plates with the orientation c ⊥ B agree with each other. The line shift with decreasing temperature is explained by the reduction of the Knight shift. The thermal activation energy of charge carriers is estimated. The spectra for the plates with the orientation c || B demonstrate peculiar behavior below 91 K. The spin-lattice relaxation time for the powder and monocrystalline plates with both orientations at room temperature is measured.     

Stability of the (0001) surface of the Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript> topological insulator

The inertness of the cleaved (0001) surface of a Bi₂Se₃ single crystal to oxidation has been demonstrated using X-ray photoelectron spectroscopy, as well as atomic-force and scanning tunneling microscopy and spectroscopy. No intrinsic bismuth and selenium oxides are formed on the surface after a month of storage in air. Atomically flat surfaces with macroscopic sizes (∼1 cm²) and rms roughness less than 0.1 nm have been prepared, and (1 × 1)-(0001) Bi₂Se₃ atomic structure has been resolved. The tunneling conductance measurements have shown that the energy dependence of the surface density of states is quasilinear in the band gap of Bi₂Se₃.     

Photoacoustic spectroscopy of thin films of As<Subscript>2</Subscript>S<Subscript>3</Subscript>, As<Subscript>2</Subscript>Se<Subscript>3</Subscript> and GeSe<Subscript>2</Subscript>

Photoacoustic spectroscopy (PAS) is one of the important branches of spectroscopy, which enables one to detect light-induced heat production following the absorption of pulsed radiation by the sample. As₂S₃, As₂Se₃ and GeSe₂ exhibit a wide variety of photo-induced phenomena that enable them to be used as optical imaging or storage medium and various electronic devices, including electro-optic information storage devices and optical mass memories. Therefore, accurate measurement of thermal properties of semiconducting films is necessary to study the memory density. The thermal conductivity of thin films of As₂S₃ (thickness 100 μm and 80 μm), As₂Se₃ (thickness 100 μm and 80 μm) and GeSe₂ (thickness 120 μm and 100 μm) has been measured using PAS technique. Our result shows that the thermal conductivity of thicker films is larger than the thinner films. This can be explained by the thermal resistance effect between the film and the surface of the substrate.      

Selective wet etching of Ge<Subscript>2</Subscript>Sb<Subscript>2</Subscript>Te<Subscript>5</Subscript> phase-change thin films in thermal lithography with tetramethylammonium

In this paper, we study Ge₂Sb₂Te₅ phase-change film as a promising inorganic photoresist using organic alkaline: tetramethylammonium hydroxide (TMAH) solution, instead of inorganic alkali or acid as etchant. The basic etching properties are investigated by prior and posterior annealing Ge₂Sb₂Te₅ films. Selectivity is found to be dependent on concentration of TMAH. There is a good selectivity in the 25% TMAH solution, in which the amorphous state is etched away, whereas the crystalline state remains. The etching rate decreases when the concentration of TMAH is diluted; and an opposite selectivity, compared with 25% TMAH solution, is observed in the 0.125% TMAH solution. Selective etching with laser crystallization in different power levels is also studied, and an excellent wet selectivity in the 25% TMAH solution is obtained. The remaining crystalline lines are observed by atomic force microscopy. The surface roughness after etching is at a good level. The selective wet-etching mechanism is also discussed.     

Electrical switching studies on As<Subscript>40</Subscript>Te<Subscript>60-x</Subscript>Se<Subscript>x</Subscript> and As<Subscript>35</Subscript>Te<Subscript>65-x</Subscript>Se<Subscript>x</Subscript> glasses

The I–V characteristics of bulk As₄₀Te_60-xSe_x and As₃₅Te_65-xSe_x glasses have been studied with a current sweep of 0–18 mA-0, over a wide range of compositions (4≤x≤22). All the glasses studied showed a threshold electrical switching behaviour. The number of switching cycles withstood by the samples has been found to depend on the ON-state current. It is seen that the switching voltages increase with increase in selenium content. Further, the switching voltages are found to be almost independent of the thickness of the sample (d), in the range 0.18–0.3 mm. Also, the switching voltages and the number of switching cycles withstood by the samples are found to decrease with temperature. Received: 6 November 2002 / Accepted: 8 November 2002 / Published online: 29 January 2003 RID="*" ID="*"Corresponding author. Fax: +91-80/360-0135, E-mail: sasokan@isu.iisc.ernet.in     

Effect of conditions of preparation on the thermoelectric properties of solid solutions of Bi<Subscript>0.5</Subscript>Sb<Subscript>1.5</Subscript>Te<Subscript>3</Subscript>

The effect the conditions of preparing thermoelectric solid solutions of Bi_0.5Sb_1.5Te₃ + 0.06 wt % Pb by hardening from the liquid state with subsequent hot pressing have on their thermoelectric properties is studied. It is found that the optimum thermoelectric quality factors are achieved at a 2200–2800 rpm rate of copper disc rotation.