Magnetic properties and local configurations of <Superscript>57</Superscript>Fe atoms in CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> powders and CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/PVA nanocomposites

The composition and magnetic properties of the powders extracted from CoFe₂O₄ aqueous suspensions and the CoFe₂O₄/PVA (PVA is polyvinyl alcohol) nanocomposites with a cobalt ferrite content of 10–30 wt % have been investigated using Mössbauer spectroscopy, transmission electron microscopy, and vibration magnetometry. The cationic formulas of the cobalt ferrites synthesized have been determined. The differences between samples synthesized at temperatures of 72.5 and 82.5°C have been revealed. The specific features of the observed changes in the agglomeration of CoFe₂O₄ particles after introducing into the PVA matrix have been studied. It has been shown that the iron ion distribution determined by Mössbauer spectroscopy in octahedral and tetrahedral lattice sites correlates with vibration magnetometry data.     

Structural Aspects of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Magnetic Nanoparticles According to X-Ray and Neutron Scattering

Structural aspects of powders containing magnetic nanoparticles Fe₃O₄/CoFe₂O₄ with the anticipated “core-shell” structure are considered by means of comparative analysis with individual particles of Fe₃O₄, CoFe₂O₄ in accordance of data obtained from X-ray powder diffraction and small-angle scattering of X-ray (synchrotron) radiation and neutrons. It is shown that magnetic particles in the powders under study have a strong polydispersity and form complex aggregates. Characteristic sizes of the crystallites, as well as a ratio of magnetite to cobalt-ferrite in the composition of the Fe₃O₄/CoFe₂O₄ particles were evaluated from the analysis of the diffraction peaks. Аnalyzing the data on small-angle scattering, the dimensional characteristics of particles and aggregates, as well as the volume fraction of the last ones in the powders, have been obtained. Fractal dimensions of aggregates are determined. A significant difference is observed in the scattering on Fe₃O₄/CoFe₂O₄ particles and the total scattering consisting of partial contributions to scattering on individual magnetite (Fe₃O₄) and cobalt-ferrite (CoFe₂O₄) powders, which does not exclude the formation of the “core-shell” structure.     

Controlled-synthesis,characterization, and magnetic properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanostructures

Fe₃O₄ nanostructures with different morphologies, including uniform nanoparticles, nanorods and nanowire bundles, have been successfully synthesized via a facile hydrothermal route. Based on the observation of TEM images, the growth mechanism of one-dimensional Fe₃O₄ nanostructures is in accordance with Ostwald ripening process. From the hysteresis loops of as-prepared Fe₃O₄ products, we found that the morphology has great influence on the magnetic properties. The uniform Fe₃O₄ nanoparticles have higher saturation magnetization and lower coercivity than that of Fe₃O₄ nanorods and nanowires bundles. These phenomena attribute to the high shape anisotropy of nanorods and nanowire bundles, which prevent them from magnetizing in directions other than along their easy magnetic axes. PACS 81.07.-b; 75.50.Bb; 75.30.Gw; 81.10.Dn; 81.16.Be     

One-step synthesis of colloidal Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> and γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles at room temperature

A facile room-temperature synthesis has been developed to prepare colloidal Mn₃O₄ and γ-Fe₂O₃ nanoparticles (5 to 25 nm) by an ultrasonic-assisted method in the absence of any additional nucleation and surfactant. The morphology of the as-prepared samples was observed by transmission electron microscopy. High-resolution transmission electron microscopy observations revealed that the as-synthesized nanoparticles were single crystals. The magnetic properties of the samples were investigated with a superconducting quantum interference device magnetometer. The possible formation process has been proposed.     

Elevated electrochemical property of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> originated from nano-sized Mn<Subscript>3</Subscript>O<Subscript>4</Subscript>

By employment of nano-sized pre-prepared Mn₃O₄ as precursor, LiMn₂O₄ particles have been successfully prepared by facile solid state method and sol-gel route, respectively. And the reaction mechanism of the used precursors of Mn₃O₄ is studied. The structure, morphology, and element distribution of the as-synthesized LiMn₂O₄ samples are characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). Compared with LiMn₂O₄ synthesized by facile solid state method (SS-LMO), LiMn₂O₄ synthesized by modified sol-gel route (SG-LMO) possesses higher crystallinity, smaller average particle size (~175 nm), higher lithium chemical diffusion coefficient (1.17 × 10^?11 cm² s^?1), as well as superior electrochemical performance. For example, the cell based on SG-LMO can deliver a capacity of 85.5 mAh g^?1 at a high rate of 5 °C, and manifests 88.3% capacity retention after 100 cycles at 0.5 °C when cycling at 45 °C. The good electrochemical performance of the cell based on SG-LMO is ascribed mainly to its small particle size, high degree of dispersion, and uniform element distribution in bulk material. In addition, the lower polarization potential accelerates Li⁺ ion migration, and the lower atom location confused degree maintains integrity of crystal structure, both of which can effectively improve the rate capability and cyclability of SG-LMO.     

Magnetic properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> surface

The magnetic properties of the magnetite Fe₃O₄(110) surface have been studied by spin resolved Auger electron spectroscopy (SRAES). Experimental spin resolved Auger spectra are presented. The results of calculation of Auger lines polarization carried out on the basis of electronic state density are presented. Problems related to magnetic moments of bivalent (Fe²⁺) and trivalent (Fe³⁺) ions on the Fe₃O₄(110) surface are discussed. It is established that the deposition of a thin bismuth film on the surface results in significant growth of polarization of iron Auger peaks, which is due to additional spin-orbit scattering of electrons by bismuth atoms.     

Magnetoreflection and Magnetostriction in Ferrimagnetic Spinels CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>

It is shown that magnetoreflectance of natural light up to +4% exists in magnetostrictive ferrimagnetic spinel CoFe₂O₄ single crystal; this effect is associated with a change of the fundamental absorption edge, the impurity absorption band, and the phonon spectrum under the action of a magnetic field. The correlation between the field dependences of magnetoreflectance and magnetostriction has been established. The physical mechanisms responsible for the spectral and field peculiarities of magnetoreflection have been explained. It is shown that the magnetorefractive effect in CoFe₂O₄, which is associated with magnetoelastic properties of the spinel, amounts to +1.5 × 10^–3 in magnetic fields exceeding the saturation field. Analysis of magnetooptical and magnetoelastic data has made it possible to estimate deformation potential as Ξ _u = 20 eV for the valence band of the spinel.     

Magnetic structure of the NiCr<Subscript>2</Subscript>O<Subscript>4</Subscript> nickel chromite

The magnetic properties of the NiCr₂O₄ chromite are investigated and compared with similar properties of the NiFe_1.1Cr_0.9O₄ nickel ferrite-chromite material. It is found for the first time that the tetrahedral (A) sublattice of the NiCr₂O₄ chromite is responsible for the total magnetic moment. Moreover, it is revealed that the NiCr₂O₄ chromite exhibits a giant magnetostriction of the paraprocess (λ _para ～ 200×10^?6) and an anomalously large volume magnetostriction (ω ～ 500×10^?6) at a temperature of 4.2 K in magnetic fields up to ～50 kOe. The inference is made that the observed paraprocess is caused by an increase in the degree of noncollinearity of the magnetic moments induced in the octahedral (B) sublattice of the NiCr₂O₄ chromite in an external magnetic field.     

Magnetic properties of ordered nanowires of the quasi-two-dimensional antiferromagnet SpFeMn(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>

Ordered arrays of nanowires of the photochromic antiferromagnet SpFeMn(C₂O₄)₃ (where Sp is 1-{(1′,3′,3′-trimethyl-6-nitro-5′-chlorospiro[2H-1-benzopyran-2,2′-indolin]-8-yl)methyl}pyridinium) have been fabricated in anodized aluminum oxide pores with diameters of 20 and 200 nm. It has been revealed that the growth of the spin-glass phase with noncollinear ordering of spins in nanowires is suppressed in favor of the uniaxial antiferromagnetic phase. A decrease in the nanowire diameter leads to an increase in the anisotropy of the magnetic resonance spectra. This is associated with the magnetocrystalline anisotropy that considerably exceeds the anisotropy of the nanowire shape.     

Magnetic dynamics of phase separation domains in GdMn<Subscript>2</Subscript>O<Subscript>5</Subscript> and Gd<Subscript>0.8</Subscript>Ce<Subscript>0.2</Subscript>Mn<Subscript>2</Subscript>O<Subscript>5</Subscript> multiferroics

Specific features of the magnetic properties and magnetic dynamics of isolated phase separation domains in GdMn₂O₅ and Gd_0.8Ce_0.2Mn₂O₅ have been investigated. These domains represent 1D superlattices consisting of dielectric and conducting layers with the ferromagnetic orientation of their spins. A set of ferromagnetic resonances of separate superlattice layers has been studied. The properties of the 1D superlattices in GdMn₂O₅ and Gd_0.8Ce_0.2Mn₂O₅ are compared with the properties of the previously investigated RMn₂O₅ (R = Eu, Tb, Er, and Bi) series. The similarity of the properties for all the RMn₂O₅ compounds with different R ion types is established. Based on the concepts of the magnetic dynamics of ferromagnetic multilayers and properties of semiconductor superlattices, a 1D model of the superlattices in RMn₂O₅ is built.     

Fabrication,structure, and properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@C encapsulated with YVO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> composites

The use of carbon shells offers many advantages in surface coating or surface modification due to their surface with activated carboxyl and carbonyl groups. In this study, the Fe₃O₄@C@YVO₄:Eu³⁺ composites were prepared through a simple sol–gel process. Reactive carbon interlayer was introduced as a key component, which separates lanthanide-based luminescent component from the magnetite, more importantly, it effectively prevent oxidation of the Fe₃O₄ core during the whole preparation process. The morphology, structure, magnetic, and luminescent properties of the composites were characterized by transmission electron microscopy (TEM), high-resolution TEM, X-ray diffraction, X-ray photoelectron spectra, VSM, and photoluminescent spectrophotometer. As a result, the Fe₃O₄@C/YVO₄:Eu³⁺ composites with well-crystallized and core–shell structure were prepared and the YVO₄:Eu³⁺ luminescent layer decorating the Fe₃O₄@C core–shell microspheres are about 10 nm. In addition, the Fe₃O₄@C@YVO₄:Eu³⁺ composites have the excellent magnetic and luminescent properties, which allow them great potential for bioapplications such as magnetic bioseparation, magnetic resonance imaging, and drug/gene delivery.     

Synthesis and studies of trisubstituted biphthalonitrile/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> magnetic hybrid microspheres

New trisubstituted biphthalonitrile/magnetite (TSB/Fe₃O₄) magnetic hybrid microspheres were synthesized from TSB and FeCl₃ · 6H₂O using the method of one-stage thermal temperature crystallization of solvents. The morphology and structure of magnetic hybrid microspheres were inspected using a scanning electron microscope, IR Fourier spectroscopy, and X-ray diffraction. It was found that the grown TSB/Fe₃O₄ magnetic hybrid microspheres represent spherical particles with an average size of ~137 nm and a small size spread. The size and size distribution of magnetic hybrid microspheres can be controlled by a small change in the ratio of TSB and Fe³⁺ ion contents in the microsphere. TSB/Fe₃O₄ hybrid microspheres exhibit a rather high saturation magnetization (58.16 emu g^–1) and new microwave electromagnetic properties, i.e., lower (in comparison with published) dielectric losses at low frequencies; magnetic losses are increased obviously due to an increase in the TSB content. Furthermore, it is detected that magnetic hybrid microspheres absorb microwaves, and strong reflection losses in a wide frequency range are established. The effective reflection loss of–31 dB is obtained in the microwave range from 2 to 16 GHz due to TSB content variations. Wide absorption properties of microwaves along with regular spherical shape and excellent magnetic properties offer wide opportunities for various applications of TSB/Fe₃O₄ magnetic hybrid microspheres as functional materials.     

Microemulsion-mediated in-situ synthesis and magnetic characterization of polyaniline/Zn<Subscript>0.5</Subscript>Cu<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocomposite

Polyaniline/Zn_0.5Cu_0.5Fe₂O₄ nanocomposite was synthesized by a simple, general and inexpensive in-situ polymerization method in w/o microemulsion. The effects of polyaniline coating on the magnetic properties of Zn_0.5Cu_0.5Fe₂O₄ nanoparticles were investigated. The structural, morphological and magnetic properties of as-prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, scanning electron microscopy (SEM) and magnetic measurements. The morphology analysis confirmed that polyaniline was deposited on the porous surface of magnetic Zn_0.5Cu_0.5Fe₂O₄. It was shown that the saturation magnetization and coercivity of Zn_0.5Cu_0.5Fe₂O₄ decreased after polyaniline coating, which can be interpreted by the interparticle dipole–dipole interactions that contributed to magnetic anisotropy and changed the magnetic properties of the nanoparticles. PACS  74.25.Ha; 81.05.-t; 81.05.Lg     

Preparation and electrochemical properties of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>/Ti<Subscript>4</Subscript>O<Subscript>7</Subscript> composite for lithium-ion batteries

In order to improve the rate capability of Li₄Ti₅O₁₂, Ti₄O₇ powder was successfully fabricated by improved hydrogen reduction method, then a dual-phase composite Li₄Ti₅O₁₂/Ti₄O₇ has been synthesized as anode material for lithium-ion batteries. It is found that the Li₄Ti₅O₁₂/Ti₄O₇ composite shows higher reversible capacity and better rate capability compared to Li₄Ti₅O₁₂. According to the charge-discharge tests, the Li₄Ti₅O₁₂/Ti₄O₇ composite exhibits excellent rate capability of 172.3 mAh g^?1 at 0.2 C, which is close to the theoretical value of the spinel Li₄Ti₅O₁₂. More impressively, the reversible capacity of Li₄Ti₅O₁₂/Ti₄O₇ composite is 103.1 mAh g^?1 at the current density of 20 C after 100th cycles, and it maintains 84.8% of the initial discharge capacity, whereas that of the bare spinel Li₄Ti₅O₁₂ is only 22.3 mAh g^?1 with a capacity retention of 31.1%. The results indicate that Li₄Ti₅O₁₂/Ti₄O₇ composite could be a promising anode material with relative high capacity and good rate capability for lithium-ion batteries.     

Room temperature synthesis of single-crystal Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles with superparamagnetic property

Single-crystal Fe₃O₄ nanoparticles with uniform size and relatively better monodispersity have been successfully synthesized via a facile room temperature coprecipitation route in the present of poly(vinyl pyrrolidone) (PVP). This method does not require high temperature, expensive and toxic starting materials, complicated procedure and toxic organic solvents. The magnetic properties of as-prepared samples were recorded on a superconducting quantum interference device magnetometer. Its blocking temperature is 140 K. The hysteresis loops of single-crystal Fe₃O₄ nanoparticles at 300 K and 10 K show the transition from superparamagnetic to ferromagnetic behavior. And the maintenance of high saturation magnetization ascribes to the single-crystalline nature of these Fe₃O₄ nanoparticles. PACS 75.50.K; 75.70.C     

Elastic,magnetic, and magnetoelectric properties of the CaBaCo<Subscript>4</Subscript>O<Subscript>7</Subscript> multiferroic

The structural, elastic, magnetic, and magnetoelectric properties of the CaBaCo₄O₇ multiferroic are experimentally studied and compared with the properties of the related YBaCo₄O₇ cobaltite, where Y³⁺ ions substitute for Ca²⁺ ions. Unlike the frustrated YBaCo₄O₇ magnet, the softening of Young’s modulus and the hysteresis in the ΔE(T)/E ₀ curve of ferrimagnetic CaBaCo₄O₇ in the paramagnetic region are weak, and the anomaly during the magnetic transition increases by almost an order of magnitude. This difference can point to different characters of the development of a long-range magnetic order in these two cobaltites. The distortion of the crystal structure that removes the frustrations of exchange interactions is found to correlate with the magnetic behavior of the cobaltites under study. The magnetization curves of the Ca cobaltite have two steps below 15 K, which can point to the presence of a metastable state in a high magnetic field. The study of the longitudinal and transverse magnetoelectric effects in a pulsed magnetic field demonstrates that their magnitudes are maximal near T _C and change their character from linear to quadratic during passage through this temperature.     

Magnetic structure and phase diagram of Sr<Subscript>5</Subscript>Rh<Subscript>4</Subscript>O<Subscript>12</Subscript> frustrated Ising magnet

The magnetic structure of Sr₅Rh₄O₁₂ is based on Ising chains of rhodium ions with a variable valence, Rh³⁺-Rh⁴⁺. The ordering in the chains is assumed to be ferromagnetic. It has been shown that the magnetic structure and phase diagram of Sr₅Rh₄O₁₂ are well described in a model taking into account weak antiferromagnetic interactions between the nearest and next-nearest neighbors on the triangular lattice of ferromagnetic Ising chains. The ground state at low temperatures is the two-sublattice stripe phase; this phase in the magnetic field is transformed to the ferrimagnetic phase and, then, to the ferromagnetic phase. Small plateaus can be observed in the region of the transition from the ferrimagnetic phase to the ferromagnetic one.     

Structural disordering in Cr-doped Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> spinels

The processes of lithium redistribution in the structure of cubic Li₄Ti₅O₁₂ spinel, caused by both chromium doping and thermal activation, have been investigated by nuclear magnetic resonance. It is shown that Li ions migrate from tetra- to octahedral crystallographic positions with an increase in temperature. This process becomes more pronounced at temperatures above 400 K. In contrast, the fraction of tetrahedrally coordinated Li increases as a result of doping with chromium.     

Synthesis and electrocatalytic activities of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocubes

In this article, a hydrothermal method was developed to synthesize Co₃O₄ nanocubes using hydrogen peroxide (H₂O₂) as oxidant, Co(NO₃)₂·6H₂O as a cobalt source. The products are characterized in detail by multiform techniques including X-ray diffraction (XRD), energy dispersive X-ray analysis (EDS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results show that the obtained products are Co₃O₄ nanocubes with size ranging between 20 and 40 nm. The effects of the hydrogen peroxide concentration on the size of the products have been studied. The electrocatalytic activities of H₂O₂ reduction on Co₃O₄ nanocubes in phosphate buffer were also evaluated.     

State of spin glass in SmFeTi<Subscript>2</Subscript>O<Subscript>7</Subscript>

The SmFeTi₂O₇ compound has been synthesized using the solid-phase reaction method. In order to determine the magnetic state, X-ray structural, Mössbauer, calorimetric, and magnetic measurements have been performed. The state of spin glass with the freezing point T _f = 7 K has been found for SmFeTi₂O₇.