Transmission electron microscopy study of Ruddlesden-Popper Can+1MnnO3n+1n=2 and 3 compounds

Two Ruddlesden-Popper compounds Ca_n+1Mn_nO_3n+1 with n=2 and 3 synthesized by a citrate gel technique have been studied by TEM. The structure of Ca₄Mn₃O₁₀ is consistent with the previously determined structure having the space group Pbca and a⁻ a⁻ c⁺/a⁻ a⁻ c⁺ tilt system. The presence of defects suggests the possible high-temperature phase transition from untilted I4/mmm to Pbca. The structure of Ca₃Mn₂O₇ was found to be different from the previously suggested I4/mmm symmetry. Ca₃Mn₂O₇ forms with an orthorhombic structure with either Cmcm or Cmc2₁ space group. A structural model for Cmc2₁ based on the tilting of almost-rigid octahedra with a⁺ c⁻ c⁻/a⁺ c⁻ c⁻ tilt system is proposed. The lamellar defects were shown to be twin variants of the Cmc2₁ structure with the (001)_t interfaces, which suggests the possible tilting phase transition from the ideal I4/mmm to Cmc2₁ following the maximal group-subgroup symmetry tree: I4/mmm→Fmmm→Bbmm(Cmcm)→Bb2₁m(Cmc2₁).     

Structure and magnetic properties of the orthorhombic n=2 Ruddlesden-Popper phases Sr3Co2O5+δ (δ=0.91, 0.64 and 0.38)

The reduced Ruddlesden-Popper phases, Sr₃Co₂O_5+δ with δ=0.91, 0.64 and 0.38, have been prepared in a nitrogen atmosphere. The crystal structures were determined by powder neutron diffraction. Oxygen vacancies are found both in O(3) and O(4) sites but the majority are along one crystallographic axis in the CoO₂ plane, inducing an orthorhombic distortion of the normally tetragonal n=2 Ruddelsden-Popper structure. Superstructures due to oxygen ordering are observed by electron microscopy. The magnetic measurements reveal complex behavior with some ferromagnetic interactions present for Sr₃Co₂O_5.91 and Sr₃Co₂O_5.64.     

Phase stabilities of monoclinic oxoborates LaB3O6 and GdB3O6 in C121 and I12/a1 phase—Energetics and chemical bonds derived from first-principles calculations

The computational study on the relative phase stabilities between two monoclinic polymorphs of the lanthanide-containing oxoborates LaB₃O₆ and GdB₃O₆ is presented at the first-principles density functional theory gradient-corrected B3PW level. The hypothetical monoclinic α-BiB₃O₆-like C121 non-centrosymmetric crystal structures were assumed for LaB₃O₆ and GdB₃O₆ and the corresponding geometries were calculated and compared with their monoclinic I12/a1 centrosymmetric structures. The enthalpy-pressure correlations were calculated and the first-principles chemical bonds based on the crystal orbital overlapping population were quantitatively analyzed for LaB₃O₆ and GdB₃O₆. The chemical bonds between the central cation (La (III)/Gd (III)) and coordinated oxygen atoms rather than the B-O bonds in the borate units are found to stabilize the I12/a1 centrosymmetric LaB₃O₆ and GdB₃O₆ structures with respect to the C121 non-centrosymmetric counterparts.     

Composition-induced structural phase transitions in the (Ba1−xLax)2In2O5+x (0?x?0.6) system

Composition-induced structural phase changes across the high temperature, fast oxide ion conducting (Ba_1−xLa_x)₂In₂O_5+x, 0?x?0.6, system have been carefully analysed using hard mode infrared (IR) powder absorption spectroscopy, X-ray powder diffraction and electron diffraction. An orthorhombic brownmillerite to three-dimensionally disordered cubic perovskite phase transition in this system is signalled by a drastic change in slope of both wavenumber and average line widths of IR spectra as a function of composition. Some evidence is found for the existence of an intermediate tetragonal phase (previously reported to exist from electron diffraction data) around x∼0.2. The new spectroscopic data have been used to compare microscopic and macroscopic strain parameters arising from variation in composition. The strain and spectroscopic data are consistent with first-order character for the tetragonal→orthorhombic transition, while the cubic→tetragonal transition could be continuous. Differences between the variation with composition of spectral parameters and of macroscopic strain parameters are consistent with a substantial order/disorder component for the transitions. There is also evidence for precursor effects within the cubic structure before symmetry is broken.     

Structural and magnetic properties of high-pressure/high-temperature synthesized (Sr1-xRx)CoO3 (R=Y and Ho) perovskites

Polycrystalline perovskite cobalt oxides Sr_1-xR_xCoO₃ (R=Y and Ho; 0?x?1) were prepared by high-pressure/high-temperature technique. X-ray powder patterns of the Y-system indicated cubic perovskite form for 0?x?0.5, and orthorhombic perovskite form for x=0.8 and 1.0, while coexisting of the two phases for x=0.6. The cubic perovskite samples had metallic electric resistivities while the orthorhombic ones with semiconducting or insulating nature. The parent compound SrCoO₃ showed a ferromagnetic transition at 266 K. With the Y substitution, the transition temperature increased slightly to ∼275 K at x=0.1, then decreased rapidly to ∼60 K for x=0.6. The YCoO₃ (x=1) sample showed non-magnetic behavior. The Ho-substituted system showed quite similar structural, transport and magnetic properties to those of the Y-system.     

Synthesis and crystal structure of four Pd(II) complexes containing nido or closo carborane diphosphine ligands

Three Pd(II) complexes [Pd₂(μ-Cl)₂{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 0.25CH₂Cl₂ (1), [Pd{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 4CHCl₃ (2) and [PdCl₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (3) have been synthesized by the reactions of 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ with PdCl₂ in acetonitrile, cyanophenyl and dichloromethane, respectively. A fourth complex, [PdI₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (4), was obtained by a ligand exchange reaction through the substitution of the Cl⁻ of complex 3 with I⁻. All four complexes have been characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR spectroscopy and X-ray structure determination. Single crystal X-ray determination showed that the carborane cage, nido for 1, 2 and closo for 3, 4, was coordinated bidentately to the Pd atom through the two P atoms, and the geometry at the Pd atom was square-planar in all the complexes.     

Synthesis and properties of the Co7Se8−xSx and Ni7Se8−xSx solid solutions

We report the synthesis and elementary properties of the Co₇Se_8−xS_x (x=0-8) and Ni₇Se_8−xS_x (x=0-7) solid solutions. Both systems form a NiAs-type structure with metal vacancies. In general, the lattice parameters decrease with increasing x, but in the Ni₇Se_8−xS_x system c increases on going from x=5 to 7. Magnetic susceptibility measurements show that all samples exhibit temperature-independent paramagnetism from 25-250 K. Samples within the Co₇Se_8−xS_x system, as well as Ni₇Se₈ and Ni₇SeS₇, were found to be poor metals with resistivities of ∼0.20 and ∼0.06 mΩ cm at 300 K, respectively. The Sommerfeld constant (γ) was determined from specific heat measurements to be ∼13 mJ/mol_CoK² and ∼7 mJ/mol_NiK² for Co₇Se_8−xS_x and Ni₇Se_8−xS_x, respectively.     

Photoluminescence properties of a novel phosphor, Na3La9O3(BO3)8:RE(RE=Eu,Tb)

The new oxyborate phosphors, Na₃La₉O₃(BO₃)₈:Eu³⁺ (NLBO:Eu) and Na₃La₉O₃(BO₃)₈:Tb³⁺ (NLBO:Tb) were prepared by solid-state reactions. The photoluminescence characteristics under UV excitation were investigated. The dominated emission of Eu³⁺ corresponding to the electric dipole transition ⁵D₀→⁷F₂ is located at 613 nm and bright green luminescence of NLBO:Tb attributed to the transition ⁵D₄→⁷F₅ is centered at 544 nm. The concentration dependence of the emission intensity showed that the optimum doping concentration of Eu and Tb is 30% and 10%, respectively.     

The crystal chemistry of Bi6TP2O15+x, T=Fe, Ni, Zn: Isomorphism and polymorphism, structural relationship to Bi6TiP2O16

The crystal structures of compounds with nominal compositions Bi₆FeP₂O_15+x (I), Bi₆NiP₂O_15+x (II) and Bi₆ZnP₂O_15+x (III) were determined from single-crystal X-ray diffraction data. They are monoclinic, space group I2, Z=2. The lattice parameters for (I) are a=11.2644(7), b=5.4380(3), c=11.1440(5) Å, β=96.154(4)°; for (II) a=11.259(7), b=5.461(4), c=11.109(7) Å, β=96.65(1)°; for (III) a=19.7271(5), b=5.4376(2), c=16.9730(6) Å, β=131.932(1)°. Least squares refinements on F² converged for (I) to R1=0.0554, wR₂=0.1408; for (II) R₁=0.0647, wR₂=0.1697; for (III) R₁=0.0385, wR₂=0.1023. The crystals are complexly twinned by 2-fold rotation about , by inversion and by mirror reflection. The structures consist of edge-sharing articulations of OBi₄ tetrahedra forming layers in the a-c plane that then continue by edge-sharing parallel to the b-axis. The three-dimensional networks are bridged by Fe and Ni octahedra in (I) and (II) and by Zn trigonal bipyramids in (III) as well as by oxygen atoms of the PO₄ moieties. Bi also randomly occupies the octahedral sites. Oxygen vacancies exist in the structures of the three compounds due to required charge balances and they occur in the octahedral coordination polyhedron of the transition metal. In compound (III), no positional disorder in atomic sites is present. The Bi-O coordination polyhedra are trigonal prisms with one, two or three faces capped. Magnetic susceptibility data for compound (I) were obtained between 4.2 and 350 K. Between 4.2 and 250 K it is paramagnetic, μ_eff=6.1 μ_B; a magnetic transition occurs above 250 K.     

Electron-poor SrAuxIn4−x (0.5?x?1.2) and SrAuxSn4−x (1.3?x?2.2) phases with the BaAl4-type structure

Solid solutions SrAu_xIn_4−x (0.5?x?1.2) and SrAu_xSn_4−x (1.3?x?2.2) have been prepared at 700 °C and their structures characterized by powder and single-crystal X-ray diffraction. They adopt the tetragonal BaAl₄-type structure (space group I4/mmm, Z=2; SrAu_1.1(1)In_2.9(1), a=4.5841(2) Å, c=12.3725(5) Å; SrAu_1.4(1)Sn_2.6(1), a=4.6447(7) Å, c=11.403(2) Å), with Au atoms preferentially substituting into the apical over basal sites within the anionic network. The phase width inherent in these solid solutions implies that the BaAl₄-type structure can be stabilized over a range of valence electron counts (vec), 13.0-11.6 for SrAu_xIn_4−x and 14.1-11.4 for SrAu_xSn_4−x. They represent new examples of electron-poor BaAl₄-type compounds, which generally have a vec of 14. Band structure calculations confirm that substitution of Au, with its smaller size and fewer number of valence electrons, for In or Sn atoms enables the BaAl₄-type structure to be stabilized in the parent binaries SrIn₄ and SrSn₄, which adopt different structure types.     

Lonijaposides, novel cerebrosides from Lonicera japonica

Six novel cerebrosides, lonijaposides A₁-A₄, B₁ and B₂ (1-6) have been isolated from the flowers of Lonicera japonica. Their structures were established on the basis of 1D, 2D (DEPT, HMQC, HMBC and COSY) NMR, ESI-QTOF-MS/MS and chemical evidence.     

A Novel Boron-Rich Scandium Borocarbide; Sc4.5−xB57−y+zC3.5−z(x=0.27, y=1.1, z=0.2)

A novel ternary boron-rich scandium borocarbide Sc_4.5−xB_57−y+zC_3.5−z (x=0.27, y=1.1, z=0.2) was found. Single crystals were obtained by the floating zone method by adding a small amount of Si. Single-crystal structure analysis revealed that the compound has an orthorhombic structure with lattice constants of a=1.73040(6), b=1.60738(6) and c=1.44829(6) nm and space group Pbam (No. 55). The crystal composition ScB_13.3C_0.78Si_0.008 calculated from the structure analysis agreed with the measured composition of ScB_12.9C_0.72Si_0.004. The orthorhombic crystal structure is a new structure type of boron-rich borides and there are six structurally independent B₁₂ icosahedra I1—I6, one B₈/B₉ polyhedron and nine bridging sites all which interconnect each other to form a three-dimensional boron framework. The main structural feature of the boron framework structure can be understood as a layer structure where two kinds of boron icosahedron network layer L1 and L2 stack each other along the c-axis. There are seven structurally independent Sc sites in the open spaces between the boron icosahedron network layers.     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Composition dependence of the photophysical and photocatalytic properties of (AgNbO3)1−x(NaNbO3)x solid solutions

A series of orthorhombic photocatalysts (AgNbO₃)_1−x(NaNbO₃)_x solid solutions have been synthesized by a solid-state reaction method. The composition dependence of the photophysical and photocatalytic properties of synthesized solid solutions has been investigated systematically. With an increase in the content of NaNbO₃, we found that (1) the lattice parameters decreased; (2) the Nb-O bond length in NbO₆ octahedron reduced; (3) the band gap increased; and (4) the mean particle size decreased while the Brunauer-Emmett-Teller (BET) surface area increased. Photocatalytic activities of the (AgNbO₃)_1−x(NaNbO₃)_x (0?x?0.5) samples were evaluated from gaseous 2-propanol (IPA) decomposition into acetone and CO₂ under visible-light irradiation emitted from blue-light-emitting diodes (BLEDs; light intensity: 0.01 mW cm⁻²). Among all the samples, the (AgNbO₃)_0.6(NaNbO₃)_0.4 sample showed the highest photocatalytic activity.     

Structure Study of Bi2.5Na0.5Ta2O9 and Bi2.5Nam−1.5NbmO3m+3 (m=2-4) by Neutron Powder Diffraction and Electron Microscopy

The crystal structures of Bi_2.5Na_0.5Ta₂O₉ and Bi_2.5Na_m-1.5Nb_mO_3m+3 (m=3,4) have been investigated by the Rietveld analysis of their neutron powder diffraction patterns (λ=1.470 Å). These compounds belong to the Aurivillius phase family and are built up by (Bi₂O₂)²⁺ fluorite layers and (A_m-1B_mO_3m+1)^2- (m=2-4) pseudo-perovskite slabs. Bi_2.5Na_0.5Ta₂O₉ (m=2) and Bi_2.5Na_2.5Nb₄O₁₅ (m=4) crystallize in the orthorhombic space group A2₁am, Z=4, with lattice constants of a=5.4763(4), b=5.4478(4), c=24.9710 (15) and a=5.5095(5), b=5.4783(5), c=40.553(3) Å, respectively. Bi_2.5Na_1.5Nb₃O₁₂ (m=3) has been refined in the orthorhombic space group B2cb, Z=4, with the unit-cell parameters a=5.5024(7), b=5.4622(7), and c=32.735(4) Å. In comparison with its isostructural Nb analogue, the structure of Bi_2.5Na_0.5Ta₂O₉ is less distorted and bond valence sum calculations indicate that the Ta-O bonds are somewhat stronger than the Nb-O bonds. The cell parameters a and b increase with increasing m for the compounds Bi_2.5Na_m-1.5Nb_mO_3m+3 (m=2-4), causing a greater strain in the structure. Electron microscopy studies verify that the intergrowth of mixed perovskite layers, caused by stacking faults, also increases with increasing m.     

A facile approach for the synthesis of 14-aryl- or alkyl-14H-dibenzo[a,j]xanthenes under solvent-free condition

A facile, efficient and environment-friendly protocol for the synthesis of 14-aryl- or alkyl-14H-dibenzo[a,j]xanthenes has been developed by one-pot condensation of 2-naphthol with aliphatic and aromatic aldehydes in the presence of P₂O₅ or InCl₃ as catalysts under solvent-free conditions. The present approach offers the advantages of clean reaction, simple methodology, short reaction time, high yield, easy purification, and economic availability of the catalyst.     

Structural, spectroscopic and photoluminescence studies of LiEu(WO4)2−x(MoO4)x as a near-UV convertible phosphor

A series of lithium europium double tungsto-molybdate phosphors LiEu(WO₄)_2−x(MoO₄)_x (x=0, 0.4, 0.8, 1.2, 1.6, 2.0) have been synthesized by solid-state reactions and their crystal structure, optical and luminescent properties were studied. As the molybdate content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm was found to increase and reach a maximum when the relative ratio of Mo/W is 2:0. These changes were found to be accompanied with the changes in the spectral feature, which can be attributed to the crystal field splitting of the ⁵D₀→⁷F₂ transition. As the molybdate content increases the emission intensity of the 615 nm peak also increases. The intense red-emission of the tungstomolybdate phosphors under near-UV excitation suggests them to be potential candidate for white light generation by using near-UV LEDs. In this study the effect of chemical compositions and crystal structure on the photoluminescent properties of LiEu(WO₄)_2−x(MoO₄)_x is investigated and discussed.     

Where are the Sn atoms in LaSb2Snx, 0.1?x?∼0.75?

The composition range and (composite modulated) structure of compounds within the wide range non-stoichiometric LaSb₂Sn_x, 0.1?x?0.75, solid solution is carefully investigated via a combined electron diffraction, XRD and electron probe microanalysis study. Evidence for metastability of the LaSb₂Sn_x phase at the low x composition end of the solid solution is presented. Direct evidence is found for a reasonably (although by no means perfectly) well ordered Sn sub-structure which is, in general, mutually incommensurable with respect to a very well ordered underlying LaSb₂ sub-structure along both a and c directions. The overall (3+2)-d superspace group symmetry is given along with a discussion of the consequences as regards the arrangement of the Sn atoms. The Sn sub-structure c-axis cell dimension shows very little variation with composition x providing direct experimental evidence of the importance of Sn-Sn metallic bonding (along one-dimensional [001] Sn strings) for the stability of the phase.     

Preparation and photocatalytic activity of high-efficiency visible-light-responsive photocatalyst SnSx/TiO2

Visible-light-responsive composite photocatalysts SnS₂/TiO₂ and SnS/TiO₂ with different mass ratios were prepared by in-situ synthesis technology in solution with commercial TiO₂. The junction-based materials SnS_x (x=1, 2)/TiO₂ were found to have high visible-light photocatalytic performance and possess much better activity than the single-phase SnS_x or TiO₂. The greatly enhanced photocatalytic activity of the SnS_x/TiO₂ composites was mainly attributed to the matching band potentials and efficient charge transfer and separation at the tight-bonding interface between SnS_x and TiO₂. The fact was confirmed by the comparison of photocatalytic activities of the SnS₂/TiO₂ samples prepared by physical mixing method and in-situ synthesis technique.