Preparation and characteristics of nanostructured lipid carriers for control-releasing progesterone by melt-emulsification

Nanostructured lipid carriers (NLC) made from mixtures of solid and spatially incompatible liquid lipids were prepared by melt-emulsification. Their drug loading capacity and releasing properties of progesterone were compared with those of solid lipid nanoparticles (SLN), and the NLC prepared by solvent diffusion method. Monostearin (MS) and stearic acid (SA) were used as solid lipid, whilst the oleic acid (OA) was used as liquid lipid. Properties of carriers such as the particle size and its distribution, drug loading, drug encapsulation efficiency and drug release behavior were investigated. As a result, the drug encapsulation efficiencies were improved by adding the liquid lipid into the solid lipid of nanoparticles. The drug release behavior could be adjusted by the addition of liquid lipid, and the NLC with higher OA content showed the faster rate of drug releasing. NLC had higher efficiency of encapsulation and slower rate of drug release than those of NLC prepared by solvent diffusion method. On the other hand, the NLC with higher drug loading was obtained, though the drug encapsulation efficiency was decreased slightly due to the increase of the amount of drug. The NLC modified with polyethylene glycol (PEG) was also prepared by using polyethylene glycol monostearate (PEG-SA). It was observed that the incorporation of PEG-SA reduced the drug encapsulation efficiency, but increased the rate of drug release. A sample with almost complete drug release in 24 h was obtained by modifying with 1.30 mol% PEG-SA. It indicated that the modified NLC was a potential drug delivery system for oral administration.     

Preparation and characteristics of nanostructured lipid carriers for control-releasing progesterone by melt-emulsification

Nanostructured lipid carriers (NLC) made from mixtures of solid and spatially incompatible liquid lipids were prepared by melt-emulsification. Their drug loading capacity and releasing properties of progesterone were compared with those of solid lipid nanoparticles (SLN), and the NLC prepared by solvent diffusion method. Monostearin (MS) and stearic acid (SA) were used as solid lipid, whilst the oleic acid (OA) was used as liquid lipid. Properties of carriers such as the particle size and its distribution, drug loading, drug encapsulation efficiency and drug release behavior were investigated. As a result, the drug encapsulation efficiencies were improved by adding the liquid lipid into the solid lipid of nanoparticles. The drug release behavior could be adjusted by the addition of liquid lipid, and the NLC with higher OA content showed the faster rate of drug releasing. NLC had higher efficiency of encapsulation and slower rate of drug release than those of NLC prepared by solvent diffusion method. On the other hand, the NLC with higher drug loading was obtained, though the drug encapsulation efficiency was decreased slightly due to the increase of the amount of drug. The NLC modified with polyethylene glycol (PEG) was also prepared by using polyethylene glycol monostearate (PEG-SA). It was observed that the incorporation of PEG-SA reduced the drug encapsulation efficiency, but increased the rate of drug release. A sample with almost complete drug release in 24 h was obtained by modifying with 1.30 mol% PEG-SA. It indicated that the modified NLC was a potential drug delivery system for oral administration.     

Core–Shell Hollow Microspheres of Magnetic Iron Oxide@Amorphous Calcium Phosphate: Synthesis Using Adenosine 5′‐Triphosphate and Application in pH‐Responsive Drug Delivery

Drug nanocarriers with magnetic targeting and pH‐responsive drug‐release behavior are promising for applications in controlled drug delivery. Magnetic iron oxides show excellent magnetism, but their application in drug delivery is limited by low drug‐loading capacity and poor control over drug release. Herein, core–shell hollow microspheres of magnetic iron oxide@amorphous calcium phosphate (MIO@ACP) were prepared and investigated as magnetic, pH‐responsive drug nanocarriers. Hollow microspheres of magnetic iron oxide (HMIOs) were prepared by etching solid MIO microspheres in hydrochloric acid/ethanol solution. After loading a drug into the HMIOs, the drug‐loaded HMIOs were coated with a protective layer of ACP by using adenosine 5′‐triphosphate (ATP) disodium salt (Na₂ATP) as stabilizer, and drug‐loaded core–shell hollow microspheres of MIO@ACP (HMIOs/drug/ACP) were obtained. The as‐prepared HMIOs/drug/ACP drug‐delivery system exhibits superparamagnetism and pH‐responsive drug‐release behavior. In a medium with pH 7.4, drug release was slow, but it was significantly accelerated at pH 4.5 due to dissolution of the ACP shell. Docetaxel‐loaded core–shell hollow microspheres of MIO@ACP exhibited high anticancer activity.     

Sodium alginate/HPMC/liquid paraffin emulsified (o/w) gel beads,by factorial design approach; and in vitro analysis

The present study involved development of a novel sodium alginate (SA)/HPMC/light liquid paraffin emulsified (o/w) gel beads containing Diclofenac sodium (DS) as an active pharmaceutical ingredient and its site specific delivery by using hard gelatin capsule fabricated by enteric coated Eudragit L-100 polymer. Emulsified gel beads were formulated by 3-level factorial design, ionic gelatin method. The obtained beads were characterized by Fourier transform infrared, X-ray diffraction and Field emission scanning electron microscope analysis. The variables such as SA (X₁), HPMC (X₂), were optimized for drug loading and in vitro drug release with the help of response surface methodology (RSM). The RSM analysis predicted that SA was significant for both drug loading (p = 0.0005) and drug release (p = 0.0041). HPMC was only significant for drug release (p = 0.0154). The cross-product contribution (2FI) and quadratic model were found to be adequate and statistically accurate with correlation value (R²) of 0.9054 and 0.9450 to predict the drug loading and drug release respectively. An increase in concentration of HPMC and SA decreases the drug loading as well as the drug release. The obtained optimum values of drug loading and DS released were 7.43 % and 85.54 % respectively, which were well in agreement with the predicted value by RSM.     

Effects of synthetic lipids on solubilization and colloid stability of hydrophobic drugs

Aqueous miconazole (MCZ) aggregates were solubilized and/or colloidally stabilized by bilayer-forming synthetic amphiphiles such as dioctadecyldimethylammonium bromide (DODAB) or sodium dihexadecylphosphate (DHP) dispersions. Particle sizing, light absorption and scattering from drug particles, zeta-potential determination, and drug aggregation kinetics from turbidity changes in the presence or absence of lipid dispersions were obtained over a range of drug and lipid concentrations. The very low solubility of MCZ in water made possible the determination of size distributions for drug particles in water and comparison to those in the presence of DODAB or DHP nanosized bilayer fragments or entire and closed bilayer vesicles. Large drug aggregates disappeared upon incubation with nanosized bilayer fragments produced by ultrasonic dispersion with tip. Light-absorption spectra for MCZ in a poor solvent (water), in a good organic solvent (methanol), and in different lipid dispersions showed that solubilization depended on the presence of bilayer fragments. MCZ was poorly soluble in dispersions formed of closed bilayers (vesicles) of DODAB or DHP in the gel state and in phosphatidylcholine (PC) vesicles in the liquid-crystalline state. Increased hydrophobicity at the borders of bilayer fragments explained MCZ solubilization. At [MCZ]>0.4 mM, kinetics of drug aggregation, zeta-potential measurements, and size minimization were obtained upon addition of minute amounts of oppositely charged bilayer fragments ([DHP]=0.05 mM), making possible determination of a remarkable stabilizing effect of drug particles by coverage with anionic bilayer fragments. High drug colloid stability in the presence of charged bilayer fragments was achieved by two different means: (1). at large drug concentrations and small concentrations of bilayer fragments, coverage of large drug particles with bilayer fragments; (2). at large amounts of bilayer fragments, drug solubilization in its monomeric form at the borders of bilayer fragments. Inexpensive, synthetic bilayer fragments offered a large area of hydrophobic nanosurfaces dispersed and electrostatically stabilized in water, opening new prospects for drug solubilization and colloid stabilization of insoluble drug particles.     

The dynamics and orientation of a lipophilic drug within model membranes determined by 13C solid-state NMR

Methods for determining how a drug interacts with cellular membranes at the molecular level can give valuable insight into the mode of action of the drug and its absorption, distribution and metabolism profile. A procedure is described here to determine the orientation and location of the lipophilic drug trifluoperazine (TFP) intercalated into dimyristoylphosphatidylcholine (DMPC) bilayers, by using a novel combination of high-resolution solid-state nuclear magnetic resonance (SSNMR) methods to observe signals from (13)C within the drug at natural abundance. SSNMR measurements of (1)H-(13)C dipolar couplings for TFP and selective broadening of (13)C NMR peaks by paramagnetic Mn(2+) together suggest a model for the location, orientation and dynamics of the drug within lipid bilayers that offers an explanation for the lysoprotective effect of the drug at low concentrations. The experiments described are straightforward to implement and can be used for the routine analysis of drug-membrane interactions to provide useful information for drug design and structure refinement.     

Self‐Assembly Drug Delivery System Based on Programmable Dendritic Peptide Applied in Multidrug Resistance Tumor Therapy

In recent decades, diverse drug delivery systems (DDS) constructed by self‐assembly of dendritic peptides have shown advantages and improvable potential for cancer treatment. Here, an arginine‐enriched dendritic amphiphilic chimeric peptide CRRK(RRCG(Fmoc))₂ containing multiple thiol groups is programmed to form drug‐loaded nano‐micelles by self‐assembly. With a rational design, the branched hydrophobic groups (Fmoc) of the peptides provide a strong hydrophobic force to prevent the drug from premature release, and the reduction‐sensitive disulfide linkages formed between contiguous peptides can control drug release under reducing stimulation. As expected, specific to multidrug resistance (MDR) tumor cells, the arginine‐enriched peptide/drug (PD) nano‐micelles show accurate nuclear localization ability to prevent the drug being pumped by P‐glycoprotein (P‐gp) in vitro, as well as exhibiting satisfactory efficacy for MDR tumor treatment in vivo. This design successfully realizes stimuli‐responsive drug release aimed at MDR tumor cells via an ingenious sequence arrangement.     

Study of the Cloud Point of the Phenothiazine Drug Chlorpromazine Hydrochloride: Effect of Surfactants and Polymers

Surfactants/polymers are used extensively in drug delivery as drug carriers. We herein report the effect of surfactants and polymers on the cloud point (CP) of amphiphilic drug chlorpromazine hydrochloride. At fixed drug concentration (50 mM) and pH (6.7) these additives affect the CP in accordance to their nature and structure: anionic surfactants show an increase followed by a decrease, whereas cationic (conventional as well as gemini) and nonionic surfactants show continous increase. The behavior with polymers is dictated by the number of units present in a particular polymer. Increase in drug concentration and pH, in presence of fixed amounts of CTAB, increases and decreases the CP, respectively. Variation of CP with pH at various fixed gemini concentrations shows that gemini surfactants are better candidates for drug delivery.     

Shell cross-linked stearic acid grafted chitosan oligosaccharide self-aggregated micelles for controlled release of paclitaxel

Stearic acid grafted chitosan oligosaccharide (CSO-SA) with different degree of amino substitution (SD) was synthesized by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC)-mediated coupling reaction. The critical micelle concentration (CMC) of CSO-SA with different SD was about 0.06, 0.04, 0.01 mg/ml, respectively. With the increase of micelle concentration, the micelle size decreased, and the zeta potential increased. On the other hand, with the increase of SD of CSO-SA, the micelle size and zeta potential decreased due to the increased hydrophobic interaction of SA and the reduced free amino groups. To increase the stability of the micelle in vivo and controll drug release, the shells of micelles were cross-linked by glutaraldehyde. By controlling the molar ratio of CSO-SA to glutaraldehyde, the cross-linking of intra-micelle could be reached, and the nanoparticle with smaller size than that of its initial micelle was obtained. Paclitaxel was then used as model drug to incorporate into the micelles, and the surfaces of the micelles were further cross-linked by glutaraldehyde to form drug loaded and shell cross-linked nanoparticles. The effects of drug loading, SD of CSO-SA and cross-link degree on the size, zeta potential, drug entrapment efficiency and in vitro drug release behavior of micelles and its cross-linked nanoparticles were investigated. The higher drug entrapment efficiencies (above 94%) were observed in all case. The charged amounts of drug did not affect the drug release behavior. The drug release rate decreased with the increase of SD of CSO-SA and cross-link degree.     

Sequestration of amitriptyline by liposomes

We study the uptake of amitriptyline, which is a common cause of overdose-related fatalities, in aqueous solutions by 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) liposomes and liposomes composed of a mixture of DMPC and 1,2-dioleoyl-sn-glycero-3-[phospho-rac(1-glycerol)] (DOPG) lipids. The effect of drug concentration, liposomal charge, pH, salt, and protein presence on the drug uptake is investigated using two different methodologies, a precipitation and a centrifugation method. Furthermore, the time scale of the drug uptake is studied through qualitative observations at high pH and through conductivity measurements at neutral pH and found to be <5 s. The results of the quantitative studies show that the fractional drug uptake decreases with increasing drug concentration, and for a given concentration it increases with the pH and decreases in the presence of salt. We find that a larger amount of drug is sequestered by negatively charged liposomes (those containing DOPG) than liposomes with no net charge (DMPC). We speculate that the mechanism of drug uptake is due to both electrostatic interactions as well as hydrophobic effects. The fractional uptake by DMPC:DOPG in a 70:30 ratio is as high as 95% in water and about 90% in physiological buffer. The fractional uptake is also measured in presence of 2% (w/w) bovine serum albumin (BSA), which is approximately the protein concentration in the intercellular fluid. In presence of protein the fractional uptakes by 70:30 DMPC:DOPG liposomes and 50:50 DMPC:DOPG liposomes are 82 and 90%, respectively, at 125 muM drug amitriptyline. In the absence of liposomes, 67% of the drug is taken up by the protein in a 2% (w/w) BSA, 125 muM amitriptyline solution. Thus, addition of 50:50 DMPC:DOPG liposomes reduces the free drug concentration by a factor of about 3.5, making them attractive candidates for drug detoxification.     

生物可降解5-氟尿嘧啶载药微球的制备及性能研究

5-氟尿嘧啶(5-Fu)为水溶性嘧啶类抗代谢药,是治疗实体肿瘤的首选药物．但5-Fu毒性很大,血浆中停留半衰期t1／2仅为10～20min．为了减少氟尿嘧啶的毒副作用并提高药物利用率,可以将其制成聚合物载药微球．聚酯类高分子是较为常用的生物降解型药物载体材料,其中聚乳酸(PLA)及其共聚物具有良好的生物相容性及生物可降解性,常被广泛应用于药物缓释材料,     

Factors affecting drug encapsulation and stability of lipid-polymer hybrid nanoparticles

Lipid-polymer hybrid nanoparticles are polymeric nanoparticles enveloped by lipid layers that combine the highly biocompatible nature of lipids with the structural integrity afforded by polymeric nanoparticles. Recognizing them as attractive drug delivery vehicles, antibiotics are encapsulated in the present work into hybrid nanoparticles intended for lung biofilm infection therapy. Modified emulsification-solvent-evaporation methods using lipid as surfactant are employed to prepare the hybrid nanoparticles. Biodegradable poly (lactic-co-glycolic acid) and phosphatidylcholine are used as the polymer and lipid models, respectively. Three fluoroquinolone antibiotics (i.e. levofloxacin, ciprofloxacin, and ofloxacin), which vary in their ionicity, lipophilicity, and aqueous solubility, are used. The hybrid nanoparticles are examined in terms of their drug encapsulation efficiency, drug loading, stability, and in vitro drug release profile. Compared to polymeric nanoparticles prepared using non-lipid surfactants, hybrid nanoparticles in general are larger and exhibit higher drug loading, except for the ciprofloxacin-encapsulated nanoparticles. Hybrid nanoparticles, however, are unstable in salt solutions, but the stability can be conferred by adding TPGS into the formulation. Drug-lipid ionic interactions and drug lipophilicity play important roles in the hybrid nanoparticle preparation. First, interactions between oppositely charged lipid and antibiotic (i.e. ciprofloxacin) during preparation cause failed nanoparticle formation. Charge reversal of the lipid facilitated by adding counterionic surfactants (e.g. stearylamine) must be performed before drug encapsulation can take place. Second, drug loading and the release profile are strongly influenced by drug lipophilicity, where more lipophilic drug (i.e. levofloxacin) exhibit a higher drug loading and a sustained release profile attributed to the interaction with the lipid coat.     

Formulation and In Vitro Evaluation of Sustained Release Microspheres of Diltiazem Hydrochloride Prepared by Emulsification-Internal Gelation Method

The present work describes the formulation of alginate microspheres containing diltiazem hydrochloride by the emulsification-internal gelation method with the use of barium carbonate as a cross-linking agent. The effect of various factors (the concentration of alginate and barium chloride) on the drug loading efficiency and in vitro release were investigated. Fourier transform infrared microscopy (FTIR) and differential scanninig calorimetry (DSC) analysis confirmed the absence of any drug polymer interaction. X-ray diffraction (XRD) pattern showed that there is a decrease crystallinity of the drug. The in vitro drug release profile could be altered significantly by changing various processing parameters to give a controlled release of drug from microcapsules. The stability studies of drug-loaded microcapsules showed that the drug was stable at different storage conditions.     

Solid lipid nanoparticles prepared by solvent diffusion method in a nanoreactor system

In this study, water-in-oil (W/O) miniemulsion was used as nanoreactor to prepare solid lipid nanoparticles (SLN) by solvent diffusion method. n-Hexane, Tween 80 and Span 80 were used as the oil phase and surfactant combination for preparation of W/O miniemulsion, respectively. The stable miniemulsion with the particle size of 27.1 ± 7.6 nm was obtained when the composition of water/Tween 80/Span 80/n-hexane was 1 ml/18 mg/200 mg/10 ml. Clobetasol propionate (CP) was used as a model drug. The physicochemical properties of the SLN, such as particle size, zeta potential, surface morphology, drug entrapment efficiency, drug loading capacity and in vitro drug release behaviors were investigated, comparing with those of SLN prepared by conventional aqueoethod. The SLN prepared by the novel method displayed smaller particles size and higher dus solvent diffusion mrug entrapment efficiency than those of SLN prepared by the conventional method. The drug entrapment efficiency decreased with increasing of charged amount of drug, and 15.9% of drug loading was achieved as the charged amount of drug was 20%. The in vitro drug release tests indicated that the drug release rate was faster than that of SLN prepared by the conventional method, and the drug content in SLN did not affect the in vitro drug release profile.     

Luminescent, mesoporous, and bioactive europium-doped calcium silicate (MCS: Eu3+) as a drug carrier

Luminescent, mesoporous, and bioactive europium-doped calcium silicate (MCS: Eu) was successfully synthesized. The obtained MCS: Eu(3+) was performed as a drug delivery carrier to investigate the drug storage/release properties using ibuprofen (IBU) as the model drug. The structural, morphological, textural, and optical properties were well characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N(2) adsorption/desorption, and photoluminescence (PL) spectra, respectively. The results reveal that the MCS: Eu exhibits the typical ordered characteristics of the mesostructure. This composite shows a sustained release profile with IBU as the model drug. The IBU-loaded samples still present red luminescence of Eu(3+) ((5)D(0)-(7)F(1,2)) under UV irradiation. The emission intensities of Eu(3+) in the drug carrier system vary with the amount of released IBU, making the drug release easily tracked and monitored. The system demonstrates a great potential for drug delivery and disease therapy.     

Swelling and drug release behavior of poly(2-hydroxyethyl methacrylate/itaconic acid) copolymeric hydrogels obtained by gamma irradiation

The new copolymeric hydrogels based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) were prepared by gamma irradiation, in order to examine the potential use of these hydrogels in controlled drug release systems. The influence of IA content in the gel on the swelling characteristics and the releasing behavior of hydrogels, and the effect of different drugs, theophylline (TPH) and fenethylline hydrochloride (FE), on the releasing behavior of P(HEMA/IA) matrix were investigated in vitro. The diffusion exponents for swelling and drug release indicate that the mechanisms of buffer uptake and drug release are governed by Fickian diffusion. The swelling kinetics and, therefore, the release rate depends on the matrix swelling degree. The drug release was faster for copolymeric hydrogels with a higher content of itaconic acid. Furthermore, the drug release for TPH as model drug was faster due to a smaller molecular size and a weaker interaction of the TPH molecules with(in) the P(HEMA/IA) copolymeric networks.     

微乳液法制备可共载水溶和脂溶药物的壳聚糖季铵盐乙醇脂质体的载药性能表征

采用微乳液法制备了可包载脂溶性和水溶性药物的羧甲基壳聚糖十八烷基季铵盐(OQCMC)乙醇脂质体,研究了OQCMC乙醇高分子脂质体的相图、粒径和电位、对药物的包封及释放能力及共载水溶性和脂溶性荧光染料后的细胞内递送能力.结果表明:OQCMC上长链季铵盐分子的取代度和共乳化剂乙醇的加入量对相图中微乳区域的面积影响不大;微乳液法可制备包载水溶性长春新碱(VCR)、脂溶性消炎痛(IMC)或二者共载的OQCMC载药微球,微球粒径为(52.40±0.55)nm,分布均匀;微乳液体系对VCR的最大载药率为22.7%,对IMC的最大载药率为20.1%,二者共载时,VCR的最大载药率为12.2%,IMC的最大载药率为10.0%;载药微球对药物具有缓控释功能.OQCMC乙醇高聚物脂质体可有效地包载荧光染料异硫氰酸荧光素FITC(水溶性)和尼罗红(脂溶性),并将二者递送到卵巢癌HO8901细胞内.     

Novel prodrugs for targeting diagnostic and therapeutic radionuclides to solid tumors

Most cancer therapeutics (chemo, radiation, antibody-based, anti-angiogenic) are at best partially and/or temporarily effective. In general, the causes for failure can be summarized as: (i) poor diffusion and/or nonuniform distribution of drug/prodrug molecules in solid tumors; (ii) high drug concentration and retention in normal tissues (leading to side effects); (iii) requirement for plasma-membrane permeability and/or internalization of drug/prodrug molecules; (iv) low uptake of drug by tumor; (v) lack of retention of drug within tumor (most have gradient-driven reversible binding); and (vi) multidrug resistance. We are developing an innovative technology that aims to surmount these problems by actively concentrating and permanently entrapping radioimaging and radiotherapeutic prodrugs specifically within solid tumors. The approach will enable noninvasive sensing (imaging) and effective therapy of solid tumors, allowing tumor detection, diagnosis, and treatment to be closely coupled (personalized medicine).     

Unified QSAR & network‐based computational chemistry approach to antimicrobials. II. Multiple distance and triadic census analysis of antiparasitic drugs complex networks

In the previous work, we reported a multitarget Quantitative Structure‐Activity Relationship (mt‐QSAR) model to predict drug activity against different fungal species. This mt‐QSAR allowed us to construct a drug–drug multispecies Complex Network (msCN) to investigate drug–drug similarity (González‐Díaz and Prado‐Prado, J Comput Chem 2008, 29, 656). However, important methodological points remained unclear, such as follows: (1) the accuracy of the methods when applied to other problems; (2) the effect of the distance type used to construct the msCN; (3) how to perform the inverse procedure to study species–species similarity with multidrug resistance CNs (mdrCN); and (4) the implications and necessary steps to perform a substructural Triadic Census Analysis (TCA) of the msCN. To continue the present series with other important problem, we developed here a mt‐QSAR model for more than 700 drugs tested in the literature against different parasites (predicting antiparasitic drugs). The data were processed by Linear Discriminate Analysis (LDA) and the model classifies correctly 93.62% (1160 out of 1239 cases) in training. The model validation was carried out by means of external predicting series; the model classified 573 out of 607, that is, 94.4% of cases. Next, we carried out the first comparative study of the topology of six different drug–drug msCNs based on six different distances such as Euclidean, Chebychev, Manhattan, etc. Furthermore, we compared the selected drug–drug msCN and species–species mdsCN with random networks. We also introduced here the inverse methodology to construct species–species msCN based on a mt‐QSAR model. Last, we reported the first substructural analysis of drug–drug msCN using Triadic Census Analysis (TCA) algorithm. © 2009 Wiley Periodicals, Inc. J Comput Chem 2010     

Let-7i miRNA and platinum loaded nano-graphene oxide platform for detection/reversion of drug resistance and synergetic chemical-photothermal inhibition of cancer cell

The drug resistance of chemotherapy is a major challenge to overcome for antineoplastic agents and the reverse of drug resistant is essential for cancer therapy. Herein, we developed a drug delivery system which can simultaneously detect/reverse the drug resistance and perform synergetic treatment of cancer. In this work, we integrated cyanine5(Cy5) modified mi RNA(let-7 i)(Cy5-mi RNA) and platinum onto nano-graphene oxide(NGO)(30-50 nm) platform to achieve simultaneously detection/reversion of ...